[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Mon Oct 14 13:27:18 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 333799328 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000874] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000913] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000916] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002816] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002894] ACPI: Early table checksum verification disabled
[    0.002895] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002901] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002904] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002907] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002909] ACPI: FACS 0x000000001FFE0000 000040
[    0.002910] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002912] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002914] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002916] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002917] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002918] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002918] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002919] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002919] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002920] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002920] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002949] Zone ranges:
[    0.002949]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002950]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002951]   Normal   empty
[    0.002952] Movable zone start for each node
[    0.002952] Early memory node ranges
[    0.002953]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002954]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002955] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003112] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003130] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004089] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004486] ACPI: PM-Timer IO Port: 0x608
[    0.004493] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004518] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004520] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004521] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004522] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004523] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004524] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004526] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004526] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004528] TSC deadline timer available
[    0.004531] CPU topo: Max. logical packages:   1
[    0.004532] CPU topo: Max. logical dies:       1
[    0.004532] CPU topo: Max. dies per package:   1
[    0.004535] CPU topo: Max. threads per core:   1
[    0.004536] CPU topo: Num. cores per package:     4
[    0.004536] CPU topo: Num. threads per package:   4
[    0.004536] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004547] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004559] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004560] Booting paravirtualized kernel on KVM
[    0.004561] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004563] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004781] percpu: Embedded 58 pages/cpu s199592 r8192 d29784 u524288
[    0.004803] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004847] random: crng init done
[    0.004861] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004870] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004894] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005093] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005549] Memory: 475660K/523736K available (20480K kernel code, 2409K rwdata, 5684K rodata, 3440K init, 2156K bss, 47816K reserved, 0K cma-reserved)
[    0.005570] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005582] ftrace: allocating 53066 entries in 208 pages
[    0.013577] ftrace: allocated 208 pages with 3 groups
[    0.013598] Dynamic Preempt: full
[    0.013769] rcu: Preemptible hierarchical RCU implementation.
[    0.013769] rcu: 	RCU event tracing is enabled.
[    0.013770] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.013771] 	All grace periods are expedited (rcu_expedited).
[    0.013771] 	Trampoline variant of Tasks RCU enabled.
[    0.013771] 	Rude variant of Tasks RCU enabled.
[    0.013772] 	Tracing variant of Tasks RCU enabled.
[    0.013772] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.013773] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.013776] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013778] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013779] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.017194] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.017376] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.017439] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.022792] Console: colour VGA+ 80x25
[    0.022832] printk: legacy console [ttyS0] enabled
[    0.145647] ACPI: Core revision 20240322
[    0.146461] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.148088] APIC: Switch to symmetric I/O mode setup
[    0.149155] x2apic enabled
[    0.149905] APIC: Switched APIC routing to: physical x2apic
[    0.152123] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.153189] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.154970] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.156126] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.156971] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157973] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158972] Spectre V2 : Mitigation: Retpolines
[    0.159971] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.160971] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161971] Speculative Store Bypass: Vulnerable
[    0.162985] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.163971] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.164971] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.165971] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.166971] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.184093] Freeing SMP alternatives memory: 52K
[    0.184886] pid_max: default: 32768 minimum: 301
[    0.184983] LSM: initializing lsm=capability,landlock
[    0.185975] landlock: Up and running.
[    0.186988] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.187971] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.189128] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.190064] Performance Events: AMD PMU driver.
[    0.190858] ... version:                0
[    0.190973] ... bit width:              48
[    0.191681] ... generic registers:      4
[    0.191973] ... value mask:             0000ffffffffffff
[    0.192883] ... max period:             00007fffffffffff
[    0.192973] ... fixed-purpose events:   0
[    0.193664] ... event mask:             000000000000000f
[    0.194024] signal: max sigframe size: 1776
[    0.194760] rcu: Hierarchical SRCU implementation.
[    0.194973] rcu: 	Max phase no-delay instances is 400.
[    0.195950] smp: Bringing up secondary CPUs ...
[    0.196026] smpboot: x86: Booting SMP configuration:
[    0.196880] .... node  #0, CPUs:      #1 #2 #3
[    0.231001] smp: Brought up 1 node, 4 CPUs
[    0.232973] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.234210] devtmpfs: initialized
[    0.235217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.235976] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.236992] pinctrl core: initialized pinctrl subsystem
[    0.238093] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.239055] thermal_sys: Registered thermal governor 'step_wise'
[    0.239056] thermal_sys: Registered thermal governor 'user_space'
[    0.239986] cpuidle: using governor menu
[    0.241779] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.241975] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.242979] PCI: Using configuration type 1 for base access
[    0.243998] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.262885] raid6: sse2x4   gen() 24706 MB/s
[    0.279196] raid6: sse2x2   gen() 26027 MB/s
[    0.296216] raid6: sse2x1   gen()  6941 MB/s
[    0.296973] raid6: using algorithm sse2x2 gen() 26027 MB/s
[    0.314239] raid6: .... xor() 19144 MB/s, rmw enabled
[    0.314973] raid6: using ssse3x2 recovery algorithm
[    0.315868] ACPI: Added _OSI(Module Device)
[    0.316973] ACPI: Added _OSI(Processor Device)
[    0.317973] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.318775] ACPI: Added _OSI(Processor Aggregator Device)
[    0.320381] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.322558] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.323025] ACPI: Interpreter enabled
[    0.323725] ACPI: PM: (supports S0 S3 S5)
[    0.323974] ACPI: Using IOAPIC for interrupt routing
[    0.324911] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.324973] PCI: Using E820 reservations for host bridge windows
[    0.326025] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.327906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.327977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.328996] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.329997] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.331008] PCI host bridge to bus 0000:00
[    0.331784] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.331974] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.332973] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.333973] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.334973] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.335973] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.336974] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.338020] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.339788] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.340973] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.342379] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.345553] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.346974] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.348559] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.349855] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.350565] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.352973] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.355562] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.356908] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.358233] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.359593] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.361247] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.362017] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.363540] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.364738] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.365669] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.367974] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.370299] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.371964] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.372463] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.373939] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.375033] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.377067] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.378479] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.379214] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.381112] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.382594] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.383169] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.385558] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.386348] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.387940] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.388936] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.389560] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.390023] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.391017] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.392015] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.393015] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.394015] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.395018] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.396018] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.396996] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.397977] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.398976] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.399992] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.400976] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.401976] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.402976] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.403977] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.405163] iommu: Default domain type: Translated
[    0.405974] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.407009] SCSI subsystem initialized
[    0.407710] ACPI: bus type USB registered
[    0.407982] usbcore: registered new interface driver usbfs
[    0.408976] usbcore: registered new interface driver hub
[    0.409950] usbcore: registered new device driver usb
[    0.409981] pps_core: LinuxPPS API ver. 1 registered
[    0.410889] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.410975] PTP clock support registered
[    0.411705] Bluetooth: Core ver 2.22
[    0.411977] NET: Registered PF_BLUETOOTH protocol family
[    0.412944] Bluetooth: HCI device and connection manager initialized
[    0.412974] Bluetooth: HCI socket layer initialized
[    0.413864] Bluetooth: L2CAP socket layer initialized
[    0.413975] Bluetooth: SCO socket layer initialized
[    0.414877] PCI: Using ACPI for IRQ routing
[    0.468989] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.469970] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.469970] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.469975] vgaarb: loaded
[    0.470505] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.470973] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.475021] clocksource: Switched to clocksource kvm-clock
[    0.476093] pnp: PnP ACPI init
[    0.476757] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.478222] pnp: PnP ACPI: found 5 devices
[    0.485170] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.486785] NET: Registered PF_INET protocol family
[    0.487684] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.489102] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.490623] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.492013] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.493412] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.494862] TCP: Hash tables configured (established 4096 bind 4096)
[    0.496014] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.497224] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.498514] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.499712] RPC: Registered named UNIX socket transport module.
[    0.500806] RPC: Registered udp transport module.
[    0.501671] RPC: Registered tcp transport module.
[    0.502529] RPC: Registered tcp-with-tls transport module.
[    0.503541] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.505107] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.506251] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.507384] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.508640] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.509892] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.511154] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.512593] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.513905] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.515135] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.516360] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.517678] PCI: CLS 0 bytes, default 64
[    0.518460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.520881] Initialise system trusted keyrings
[    0.521753] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.523017] NFS: Registering the id_resolver key type
[    0.523929] Key type id_resolver registered
[    0.524691] Key type id_legacy registered
[    0.525699] Key type cifs.idmap registered
[    0.533393] xor: automatically using best checksumming function   avx       
[    0.535055] Key type asymmetric registered
[    0.535806] Asymmetric key parser 'x509' registered
[    0.536707] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.538049] io scheduler mq-deadline registered
[    0.538870] io scheduler kyber registered
[    0.539614] io scheduler bfq registered
[    0.540529] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.542675] ACPI: button: Power Button [PWRF]
[    0.543779] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.545522] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.547084] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.549773] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.551457] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.552672] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.554091] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.556211] Linux agpgart interface v0.103
[    0.556989] ACPI: bus type drm_connector registered
[    0.557899] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.558840] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.562161] Console: switching to colour dummy device 80x25
[    0.563246] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.563247] [drm] features: -context_init
[    0.566042] [drm] number of scanouts: 1
[    0.566703] [drm] number of cap sets: 0
[    0.567622] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.569927] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.571188] Console: switching to colour frame buffer device 160x50
[    0.584565] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.587251] brd: module loaded
[    0.588378] loop: module loaded
[    0.589046] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.590980] virtio_blk virtio3: [vda] 822364 512-byte logical blocks (421 MB/402 MiB)
[    0.593768] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.596668] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.597762] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.599326] scsi host0: ahci
[    0.599959] scsi host1: ahci
[    0.600550] scsi host2: ahci
[    0.601143] scsi host3: ahci
[    0.601765] scsi host4: ahci
[    0.602385] scsi host5: ahci
[    0.602909] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.604307] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.605702] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.607098] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.608491] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.609883] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.612454] e100: Intel(R) PRO/100 Network Driver
[    0.613294] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.614231] e1000: Intel(R) PRO/1000 Network Driver
[    0.615176] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.616154] e1000e: Intel(R) PRO/1000 Network Driver
[    0.616994] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.617997] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.618910] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.620399] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.621602] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.622948] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.624064] hub 1-0:1.0: USB hub found
[    0.624716] hub 1-0:1.0: 2 ports detected
[    0.625617] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.626816] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.628254] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.635614] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.636715] hub 2-0:1.0: USB hub found
[    0.637363] hub 2-0:1.0: 6 ports detected
[    0.659646] hub 1-0:1.0: USB hub found
[    0.660314] hub 1-0:1.0: 2 ports detected
[    0.661096] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.662038] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.663390] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.664570] hub 3-0:1.0: USB hub found
[    0.665227] hub 3-0:1.0: 2 ports detected
[    0.666312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.667226] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.668571] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.669733] hub 4-0:1.0: USB hub found
[    0.670373] hub 4-0:1.0: 2 ports detected
[    0.671150] usbcore: registered new interface driver usb-storage
[    0.672179] usbcore: registered new interface driver usbserial_generic
[    0.673284] usbserial: USB Serial support registered for generic
[    0.674380] usbcore: registered new interface driver ftdi_sio
[    0.675355] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.676597] usbcore: registered new interface driver pl2303
[    0.677529] usbserial: USB Serial support registered for pl2303
[    0.678661] i8042: PNP: No PS/2 controller found.
[    0.679504] mousedev: PS/2 mouse device common for all mice
[    0.680521] rtc_cmos 00:03: RTC can wake from S4
[    0.681733] rtc_cmos 00:03: registered as rtc0
[    0.682546] rtc_cmos 00:03: setting system clock to 2024-12-04T13:28:46 UTC (1733318926)
[    0.683953] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.685434] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.685446] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.687086] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.688114] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.689299] sdhci: Secure Digital Host Controller Interface driver
[    0.691585] sdhci: Copyright(c) Pierre Ossman
[    0.692338] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.693335] usbcore: registered new interface driver usbhid
[    0.694276] usbhid: USB HID core driver
[    0.694935] u32 classifier
[    0.695393]     input device check on
[    0.696015]     Actions configured
[    0.696643] NET: Registered PF_INET6 protocol family
[    0.697708] Segment Routing with IPv6
[    0.698346] In-situ OAM (IOAM) with IPv6
[    0.699032] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.700114] NET: Registered PF_PACKET protocol family
[    0.700980] Bridge firewalling registered
[    0.701680] l2tp_core: L2TP core driver, V2.0
[    0.702424] Key type dns_resolver registered
[    0.703205] NET: Registered PF_VSOCK protocol family
[    0.704351] IPI shorthand broadcast: enabled
[    0.705790] sched_clock: Marking stable (572001570, 133588530)->(771289509, -65699409)
[    0.707166] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.708627] registered taskstats version 1
[    0.709335] Loading compiled-in X.509 certificates
[    0.710862] Key type .fscrypt registered
[    0.711523] Key type fscrypt-provisioning registered
[    0.712499] Btrfs loaded, zoned=no, fsverity=no
[    0.713855] Key type encrypted registered
[    0.714614] printk: legacy console [netcon0] enabled
[    0.715460] netconsole: network logging started
[    0.880658] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.916616] ata2: SATA link down (SStatus 0 SControl 300)
[    0.917721] ata1: SATA link down (SStatus 0 SControl 300)
[    0.918827] ata5: SATA link down (SStatus 0 SControl 300)
[    0.919976] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.921191] ata4: SATA link down (SStatus 0 SControl 300)
[    0.922329] ata6: SATA link down (SStatus 0 SControl 300)
[    0.923289] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.924259] ata3.00: applying bridge limits
[    0.925074] ata3.00: configured for UDMA/100
[    0.926073] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.954758] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.955984] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.978612] IP-Config: Complete:
[    0.979235]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    0.981016]      host=192.168.7.4, domain=, nis-domain=(none)
[    0.982053]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.982055]      nameserver0=8.8.8.8
[    0.984099] clk: Disabling unused clocks
[    0.985066] md: Waiting for all devices to be available before autodetect
[    0.986097] md: If you don't use raid, use raid=noautodetect
[    0.988555] md: Autodetecting RAID arrays.
[    0.989149] md: autorun ...
[    0.989557] md: ... autorun DONE.
[    0.993234] EXT4-fs (vda): mounted filesystem 1e544a7d-50b7-4bdd-8305-d775078ddff4 r/w with ordered data mode. Quota mode: disabled.
[    0.994953] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.995985] devtmpfs: mounted
[    0.997108] Freeing unused kernel image (initmem) memory: 3440K
[    0.997914] Write protecting the kernel read-only data: 26624k
[    0.998829] Freeing unused kernel image (rodata/data gap) memory: 460K
[    0.999719] Run /sbin/init as init process
INIT: version 3.11 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.019839] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.021483] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.036377] udevd[147]: starting version 3.2.14
[    1.039284] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.040724] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.042474] udevd[148]: starting eudev-3.2.14
[    1.136638] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.269009] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.322748] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.383787] EXT4-fs (vda): re-mounted 1e544a7d-50b7-4bdd-8305-d775078ddff4 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.113 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.113 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.113 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCOghADGhNCu0osw1l4R1k5mxy0uMb+DtKtXMIM3E8I4iZGSngqBBErMKaGNmgC0O4rz8yeQyHHd+hVdRRbigfD8xJPIydODIfirpEONwOCPLV/X+hwu/VSCbywOoOUKVy/ZcXEyKowJc/GoJUNkC85k51PPza599rbxRkRaxkh0yje31AWMfJ1+aWPuqFc6RhsxCQmsoPWfbLLfaK9plG41TsLSsvALtiZGUPlo31LdC/i7DtY7DYSpaBKhydDRL5SdUGT0/M6HUAcgsJLBeHoVW4DyDWKgCETTrkut5YjW8XUeIJxdFnbInGqBPV7XHA/3G3/7fiMCmm7M8ykJVdP root@qemux86-64
Fingerprint: SHA256:rZ2CqQOnWOQvU+NYGlJ5CkZOjMH/3JrecE4TdxOr08E
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    1.870376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
done
[    1.871316] Bluetooth: BNEP filters: protocol multicast
[    1.871987] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:05.995 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5984, uid: 0, gid: 0)[0m
00:01:05.996 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:05.998 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
