[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Mon Oct 14 13:27:18 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 349740274 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000855] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000885] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000887] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002765] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002850] ACPI: Early table checksum verification disabled
[    0.002851] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002856] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002860] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002863] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002865] ACPI: FACS 0x000000001FFE0000 000040
[    0.002866] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002868] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002870] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002871] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002873] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002874] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002874] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002875] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002875] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002876] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002876] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002902] Zone ranges:
[    0.002902]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002904]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002905]   Normal   empty
[    0.002905] Movable zone start for each node
[    0.002905] Early memory node ranges
[    0.002906]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002907]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002908] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003011] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003029] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003857] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.005969] ACPI: PM-Timer IO Port: 0x608
[    0.005976] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.005997] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.005999] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006001] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006002] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006002] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006003] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006005] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006006] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006007] TSC deadline timer available
[    0.006011] CPU topo: Max. logical packages:   1
[    0.006011] CPU topo: Max. logical dies:       1
[    0.006012] CPU topo: Max. dies per package:   1
[    0.006015] CPU topo: Max. threads per core:   1
[    0.006015] CPU topo: Num. cores per package:     4
[    0.006016] CPU topo: Num. threads per package:   4
[    0.006016] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.006026] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.006038] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.006039] Booting paravirtualized kernel on KVM
[    0.006040] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006043] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.006201] percpu: Embedded 58 pages/cpu s199592 r8192 d29784 u524288
[    0.006222] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.006267] random: crng init done
[    0.006281] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.006290] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.006314] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.006463] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.006860] Memory: 475660K/523736K available (20480K kernel code, 2409K rwdata, 5684K rodata, 3440K init, 2156K bss, 47816K reserved, 0K cma-reserved)
[    0.006881] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.006894] ftrace: allocating 53066 entries in 208 pages
[    0.016015] ftrace: allocated 208 pages with 3 groups
[    0.016042] Dynamic Preempt: full
[    0.016151] rcu: Preemptible hierarchical RCU implementation.
[    0.016151] rcu: 	RCU event tracing is enabled.
[    0.016152] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.016153] 	All grace periods are expedited (rcu_expedited).
[    0.016153] 	Trampoline variant of Tasks RCU enabled.
[    0.016153] 	Rude variant of Tasks RCU enabled.
[    0.016154] 	Tracing variant of Tasks RCU enabled.
[    0.016154] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.016155] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.016158] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016160] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016161] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019549] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019728] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019791] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024144] Console: colour VGA+ 80x25
[    0.024190] printk: legacy console [ttyS0] enabled
[    0.142376] ACPI: Core revision 20240322
[    0.143128] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.144666] APIC: Switch to symmetric I/O mode setup
[    0.145617] x2apic enabled
[    0.146313] APIC: Switched APIC routing to: physical x2apic
[    0.148139] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.149149] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.150874] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.151997] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.152874] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.153876] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.154876] Spectre V2 : Mitigation: Retpolines
[    0.155874] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.156875] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.157874] Speculative Store Bypass: Vulnerable
[    0.158886] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.159874] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.160874] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.161875] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.162874] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.180901] Freeing SMP alternatives memory: 52K
[    0.181681] pid_max: default: 32768 minimum: 301
[    0.181888] LSM: initializing lsm=capability,landlock
[    0.182878] landlock: Up and running.
[    0.183891] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.184875] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.186024] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.186965] Performance Events: AMD PMU driver.
[    0.187735] ... version:                0
[    0.187877] ... bit width:              48
[    0.188549] ... generic registers:      4
[    0.188876] ... value mask:             0000ffffffffffff
[    0.189750] ... max period:             00007fffffffffff
[    0.189876] ... fixed-purpose events:   0
[    0.190551] ... event mask:             000000000000000f
[    0.190941] signal: max sigframe size: 1776
[    0.191655] rcu: Hierarchical SRCU implementation.
[    0.191877] rcu: 	Max phase no-delay instances is 400.
[    0.192841] smp: Bringing up secondary CPUs ...
[    0.192927] smpboot: x86: Booting SMP configuration:
[    0.193750] .... node  #0, CPUs:      #1 #2 #3
[    0.227926] smp: Brought up 1 node, 4 CPUs
[    0.229546] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.230220] devtmpfs: initialized
[    0.231109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.231884] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.232895] pinctrl core: initialized pinctrl subsystem
[    0.234010] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.234955] thermal_sys: Registered thermal governor 'step_wise'
[    0.234956] thermal_sys: Registered thermal governor 'user_space'
[    0.235885] cpuidle: using governor menu
[    0.237637] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.237878] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.238882] PCI: Using configuration type 1 for base access
[    0.239890] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.257058] raid6: sse2x4   gen() 10354 MB/s
[    0.274891] raid6: sse2x2   gen() 11853 MB/s
[    0.293030] raid6: sse2x1   gen()  4630 MB/s
[    0.294879] raid6: using algorithm sse2x2 gen() 11853 MB/s
[    0.313197] raid6: .... xor() 9558 MB/s, rmw enabled
[    0.314877] raid6: using ssse3x2 recovery algorithm
[    0.315782] ACPI: Added _OSI(Module Device)
[    0.315877] ACPI: Added _OSI(Processor Device)
[    0.316648] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.317876] ACPI: Added _OSI(Processor Aggregator Device)
[    0.319284] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.321490] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.321928] ACPI: Interpreter enabled
[    0.322885] ACPI: PM: (supports S0 S3 S5)
[    0.323637] ACPI: Using IOAPIC for interrupt routing
[    0.323897] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.324876] PCI: Using E820 reservations for host bridge windows
[    0.325921] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.327750] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.327881] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.328899] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.329901] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.330914] PCI host bridge to bus 0000:00
[    0.331663] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.331876] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.332876] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.333876] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.334876] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.335876] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.336877] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.337918] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.339297] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.340876] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.342384] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.345877] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.347877] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.349659] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.350547] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.351431] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.353516] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.355023] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.356662] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.358178] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.359508] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.361177] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.361916] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.363375] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.364761] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.365665] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.367876] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.370246] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.371815] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.372327] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.373776] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.374378] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.375800] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.376349] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.377107] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.379243] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.380229] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.381050] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.383314] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.384177] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.385433] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.386809] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.387442] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.387922] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.388917] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.389918] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.390916] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.391916] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.393198] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.393916] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.394894] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.395892] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.396880] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.397880] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.398879] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.399880] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.400879] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.401880] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.403059] iommu: Default domain type: Translated
[    0.403877] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.404915] SCSI subsystem initialized
[    0.405647] ACPI: bus type USB registered
[    0.405886] usbcore: registered new interface driver usbfs
[    0.406879] usbcore: registered new interface driver hub
[    0.407879] usbcore: registered new device driver usb
[    0.408831] pps_core: LinuxPPS API ver. 1 registered
[    0.408877] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.409877] PTP clock support registered
[    0.410619] Bluetooth: Core ver 2.22
[    0.410881] NET: Registered PF_BLUETOOTH protocol family
[    0.411876] Bluetooth: HCI device and connection manager initialized
[    0.412877] Bluetooth: HCI socket layer initialized
[    0.413803] Bluetooth: L2CAP socket layer initialized
[    0.413877] Bluetooth: SCO socket layer initialized
[    0.414790] PCI: Using ACPI for IRQ routing
[    0.461036] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.461873] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.461873] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.461878] vgaarb: loaded
[    0.462428] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.462876] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.467912] clocksource: Switched to clocksource kvm-clock
[    0.468998] pnp: PnP ACPI init
[    0.469679] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.471186] pnp: PnP ACPI: found 5 devices
[    0.479074] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.480797] NET: Registered PF_INET protocol family
[    0.481743] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.483236] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.484820] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.486317] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.487786] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.489156] TCP: Hash tables configured (established 4096 bind 4096)
[    0.490462] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.491683] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.493032] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.494360] RPC: Registered named UNIX socket transport module.
[    0.495479] RPC: Registered udp transport module.
[    0.496374] RPC: Registered tcp transport module.
[    0.497271] RPC: Registered tcp-with-tls transport module.
[    0.499221] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.500469] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.501658] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.502836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.504145] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.505447] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.506738] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.508229] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.510125] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.511426] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.512685] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.514041] PCI: CLS 0 bytes, default 64
[    0.514885] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.517601] Initialise system trusted keyrings
[    0.518589] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.519963] NFS: Registering the id_resolver key type
[    0.520946] Key type id_resolver registered
[    0.521752] Key type id_legacy registered
[    0.522922] Key type cifs.idmap registered
[    0.530655] xor: automatically using best checksumming function   avx       
[    0.531996] Key type asymmetric registered
[    0.532777] Asymmetric key parser 'x509' registered
[    0.533705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.535102] io scheduler mq-deadline registered
[    0.535955] io scheduler kyber registered
[    0.536721] io scheduler bfq registered
[    0.537742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.540281] ACPI: button: Power Button [PWRF]
[    0.542775] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.546816] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.550506] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.556983] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.560936] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.563517] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.566971] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.572766] Linux agpgart interface v0.103
[    0.574644] ACPI: bus type drm_connector registered
[    0.576875] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.579202] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.586478] Console: switching to colour dummy device 80x25
[    0.589169] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.589171] [drm] features: -context_init
[    0.594617] [drm] number of scanouts: 1
[    0.596078] [drm] number of cap sets: 0
[    0.597811] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.602627] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.618715] Console: switching to colour frame buffer device 160x50
[    0.641861] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.647833] brd: module loaded
[    0.650470] loop: module loaded
[    0.652061] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.656533] virtio_blk virtio3: [vda] 822364 512-byte logical blocks (421 MB/402 MiB)
[    0.663199] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.666735] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.669483] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.673117] scsi host0: ahci
[    0.674628] scsi host1: ahci
[    0.676130] scsi host2: ahci
[    0.677659] scsi host3: ahci
[    0.679233] scsi host4: ahci
[    0.680791] scsi host5: ahci
[    0.682199] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.685755] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.689280] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.692447] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.695289] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.698056] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.703065] e100: Intel(R) PRO/100 Network Driver
[    0.704771] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.706664] e1000: Intel(R) PRO/1000 Network Driver
[    0.708330] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.710301] e1000e: Intel(R) PRO/1000 Network Driver
[    0.711976] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.714004] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.715862] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.718989] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.721272] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.723922] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.726097] hub 1-0:1.0: USB hub found
[    0.727365] hub 1-0:1.0: 2 ports detected
[    0.728588] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.730984] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.734408] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.743196] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.745788] hub 2-0:1.0: USB hub found
[    0.747376] hub 2-0:1.0: 6 ports detected
[    0.772225] hub 1-0:1.0: USB hub found
[    0.773905] hub 1-0:1.0: 2 ports detected
[    0.775761] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.778071] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.781432] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.784202] hub 3-0:1.0: USB hub found
[    0.785794] hub 3-0:1.0: 2 ports detected
[    0.788648] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.790844] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.794265] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.796918] hub 4-0:1.0: USB hub found
[    0.798506] hub 4-0:1.0: 2 ports detected
[    0.800359] usbcore: registered new interface driver usb-storage
[    0.802986] usbcore: registered new interface driver usbserial_generic
[    0.805866] usbserial: USB Serial support registered for generic
[    0.808367] usbcore: registered new interface driver ftdi_sio
[    0.810768] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.813838] usbcore: registered new interface driver pl2303
[    0.816173] usbserial: USB Serial support registered for pl2303
[    0.818836] i8042: PNP: No PS/2 controller found.
[    0.820969] mousedev: PS/2 mouse device common for all mice
[    0.823438] rtc_cmos 00:03: RTC can wake from S4
[    0.826331] rtc_cmos 00:03: registered as rtc0
[    0.828331] rtc_cmos 00:03: setting system clock to 2024-12-05T09:52:48 UTC (1733392368)
[    0.831799] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.834919] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.835337] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.838046] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.840725] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.843304] sdhci: Secure Digital Host Controller Interface driver
[    0.848648] sdhci: Copyright(c) Pierre Ossman
[    0.850249] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.852367] usbcore: registered new interface driver usbhid
[    0.854347] usbhid: USB HID core driver
[    0.855726] u32 classifier
[    0.856703]     input device check on
[    0.858007]     Actions configured
[    0.859356] NET: Registered PF_INET6 protocol family
[    0.861466] Segment Routing with IPv6
[    0.862800] In-situ OAM (IOAM) with IPv6
[    0.864266] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.866470] NET: Registered PF_PACKET protocol family
[    0.867464] Bridge firewalling registered
[    0.868242] l2tp_core: L2TP core driver, V2.0
[    0.869083] Key type dns_resolver registered
[    0.869960] NET: Registered PF_VSOCK protocol family
[    0.871339] IPI shorthand broadcast: enabled
[    0.873010] sched_clock: Marking stable (745029365, 127140613)->(938766348, -66596370)
[    0.874604] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.876266] registered taskstats version 1
[    0.877066] Loading compiled-in X.509 certificates
[    0.878645] Key type .fscrypt registered
[    0.879476] Key type fscrypt-provisioning registered
[    0.880594] Btrfs loaded, zoned=no, fsverity=no
[    0.882343] Key type encrypted registered
[    0.883219] printk: legacy console [netcon0] enabled
[    0.884180] netconsole: network logging started
[    0.988174] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.007620] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.008994] ata1: SATA link down (SStatus 0 SControl 300)
[    1.010276] ata6: SATA link down (SStatus 0 SControl 300)
[    1.012954] ata4: SATA link down (SStatus 0 SControl 300)
[    1.015653] ata5: SATA link down (SStatus 0 SControl 300)
[    1.018214] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.019275] ata3.00: applying bridge limits
[    1.020129] ata2: SATA link down (SStatus 0 SControl 300)
[    1.021154] ata3.00: configured for UDMA/100
[    1.022205] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.049273] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.050499] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.069155] IP-Config: Complete:
[    1.069753]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.071533]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.072569]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.072571]      nameserver0=8.8.8.8
[    1.074961] clk: Disabling unused clocks
[    1.077324] md: Waiting for all devices to be available before autodetect
[    1.079770] md: If you don't use raid, use raid=noautodetect
[    1.081826] md: Autodetecting RAID arrays.
[    1.083387] md: autorun ...
[    1.084421] md: ... autorun DONE.
[    1.093831] EXT4-fs (vda): mounted filesystem 142d0b98-2018-4ed2-9b38-4e7c1098d2fb r/w with ordered data mode. Quota mode: disabled.
[    1.098192] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.100489] devtmpfs: mounted
[    1.102957] Freeing unused kernel image (initmem) memory: 3440K
[    1.104750] Write protecting the kernel read-only data: 26624k
[    1.106785] Freeing unused kernel image (rodata/data gap) memory: 460K
[    1.108773] Run /sbin/init as init process
INIT: version 3.04 booting
[    1.124336] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.128429] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.187552] udevd[147]: starting version 3.2.14
[    1.195232] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.198416] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.201855] udevd[148]: starting eudev-3.2.14
[    1.247170] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.381011] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.436499] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.504083] EXT4-fs (vda): re-mounted 142d0b98-2018-4ed2-9b38-4e7c1098d2fb r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.124 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 350, uid: 1000, gid: 1000)[0m
00:00:00.124 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.124 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCBr5NgzZrqRnEt1b2rNba2aWIJ6BhT7sV4mqkRk21zOw3LxEmVokAZYEFhmdJkHYqxXAq5rO9EXYCm3Izni41Mb1WBNk0Lp/rOKPExIp8aIQJE5s1mvSAYKGQx/TlS4S8k7/vG+NIVbKb0Xk9liWThz9NMQ2K/gUGdyEfz7yZuoYaR1G4BDEyAAQCodoHni1W+6P3KvqP2B7RJFHaymUnffJ3agZXKscXoWv14QyqN97bHZONNkqyDUUf2KlVI2wBqbMjJ3I+NC7x9clkXnOjCunOG7yrrAhBV/HYQZjKuWu5CeZ7YmK3Nuv1/eGEis4E9imP4SNxNzQzd4emFEgV1 root@qemux86-64
Fingerprint: SHA256:1v7Tu6t4khMRA4SCzxiuZbAz9qIGUMyISoJvik8g0EM
[    1.874036] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.877184] Bluetooth: BNEP filters: protocol multicast
[    1.880278] Bluetooth: BNEP socket layer initialized
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
00:01:03.699 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5981, uid: 0, gid: 0)[0m
00:01:03.703 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:03.707 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
