 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000131] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
[    0.000264] Switching to timer-based delay loop, resolution 16ns
[    0.015497] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.021291] Console: colour dummy device 80x30
[    0.022591] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.022715] CPU: Testing write buffer coherency: ok
[    0.023788] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.023910] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.023976] pid_max: default: 32768 minimum: 301
[    0.025118] LSM: initializing lsm=capability,landlock
[    0.025563] landlock: Up and running.
[    0.027788] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.027825] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.048947] /cpus/cpu@0 missing clock-frequency property
[    0.049210] /cpus/cpu@1 missing clock-frequency property
[    0.049240] /cpus/cpu@2 missing clock-frequency property
[    0.049273] /cpus/cpu@3 missing clock-frequency property
[    0.049387] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.062797] Setting up static identity map for 0x40200000 - 0x40200060
[    0.063829] rcu: Hierarchical SRCU implementation.
[    0.063860] rcu: 	Max phase no-delay instances is 1000.
[    0.071551] smp: Bringing up secondary CPUs ...
[    0.093658] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.093803] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.135280] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.135365] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.166834] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.166927] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.167764] smp: Brought up 1 node, 4 CPUs
[    0.167868] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.167942] CPU: All CPU(s) started in SVC mode.
[    0.174810] Memory: 751236K/786432K available (12288K kernel code, 1505K rwdata, 2948K rodata, 2048K init, 393K bss, 31604K reserved, 0K cma-reserved, 0K highmem)
[    0.184711] devtmpfs: initialized
[    0.203010] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.216872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.217671] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.236938] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.240681] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.246499] cpuidle: using governor ladder
[    0.248566] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.248646] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.250094] Serial: AMBA PL011 UART driver
[    0.279442] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.280872] printk: legacy console [ttyAMA0] enabled
[    0.306814] 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.310284] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.320798] cryptd: max_cpu_qlen set to 1000
[    0.495919] raid6: neonx8   gen()   445 MB/s
[    0.667400] raid6: neonx4   gen()  1699 MB/s
[    0.838996] raid6: neonx2   gen()  2188 MB/s
[    1.011291] raid6: neonx1   gen()  1167 MB/s
[    1.186701] raid6: int32x8  gen()   237 MB/s
[    1.358892] raid6: int32x4  gen()   237 MB/s
[    1.530628] raid6: int32x2  gen()   762 MB/s
[    1.702312] raid6: int32x1  gen()   769 MB/s
[    1.702886] raid6: using algorithm neonx2 gen() 2188 MB/s
[    1.875222] raid6: .... xor() 1128 MB/s, rmw enabled
[    1.875806] raid6: using neon recovery algorithm
[    1.880682] SCSI subsystem initialized
[    1.881581] usbcore: registered new interface driver usbfs
[    1.882105] usbcore: registered new interface driver hub
[    1.882605] usbcore: registered new device driver usb
[    1.883232] pps_core: LinuxPPS API ver. 1 registered
[    1.883548] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.883827] PTP clock support registered
[    1.897630] vgaarb: loaded
[    1.906867] clocksource: Switched to clocksource arch_sys_counter
[    1.964193] NET: Registered PF_INET protocol family
[    1.965722] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.973532] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.974491] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.975040] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.975365] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.975695] TCP: Hash tables configured (established 8192 bind 8192)
[    1.977155] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.977751] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.979577] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.984278] RPC: Registered named UNIX socket transport module.
[    1.984713] RPC: Registered udp transport module.
[    1.984945] RPC: Registered tcp transport module.
[    1.985060] RPC: Registered tcp-with-tls transport module.
[    1.985203] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.985514] PCI: CLS 0 bytes, default 64
[    1.990728] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.995517] NFS: Registering the id_resolver key type
[    1.997422] Key type id_resolver registered
[    1.997690] Key type id_legacy registered
[    2.006056] Key type cifs.idmap registered
[    2.172695] xor: measuring software checksum speed
[    2.177442]    arm4regs        :   811 MB/sec
[    2.181281]    8regs           :   973 MB/sec
[    2.185131]    32regs          :   950 MB/sec
[    2.189232]    neon            :   890 MB/sec
[    2.189720] xor: using function: 8regs (973 MB/sec)
[    2.190186] async_tx: api initialized (async)
[    2.191234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.191899] io scheduler mq-deadline registered
[    2.192156] io scheduler kyber registered
[    2.197113] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.198235] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.199169] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.202411] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.204649] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.205163] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.205427] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.205659] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.207902] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[    2.212402] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.213046] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]
[    2.213328] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.213609] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.214687] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[    2.215026] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.215585] pci 0000:00:02.0: enabling Extended Tags
[    2.216895] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.217269] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.217521] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.219927] PCI: bus0: Fast back to back transfers disabled
[    2.222333] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned
[    2.223286] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned
[    2.223989] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned
[    2.224674] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned
[    2.225102] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned
[    2.225409] pci 0000:00:01.0: BAR 0 [io  0x1000-0x101f]: assigned
[    2.226169] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.226442] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]
[    2.228053] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.234853] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.237902] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.310447] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.311960] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.311995] [drm] features: -context_init
[    2.313686] printk: legacy console [hvc0] enabled
[    2.314816] [drm] number of scanouts: 1
[    2.339653] [drm] number of cap sets: 0
[    2.353369] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    2.424076] Console: switching to colour frame buffer device 160x50
[    2.439515] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.483828] brd: module loaded
[    2.484890] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.489707] virtio_blk virtio1: [vda] 4884240 512-byte logical blocks (2.50 GB/2.33 GiB)
[    2.507451] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.508512] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.512329] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.516472] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.517177] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.518092] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.525513] hub 1-0:1.0: USB hub found
[    2.526878] hub 1-0:1.0: 4 ports detected
[    2.530933] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.533013] hub 2-0:1.0: USB hub found
[    2.533510] hub 2-0:1.0: 4 ports detected
[    2.539931] rtc-pl031 9010000.pl031: registered as rtc0
[    2.541238] rtc-pl031 9010000.pl031: setting system clock to 2024-12-17T22:24:06 UTC (1734474246)
[    2.544867] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    2.548737] usbcore: registered new interface driver usbhid
[    2.549145] usbhid: USB HID core driver
[    2.550386] u32 classifier
[    2.550734]     input device check on
[    2.551157]     Actions configured
[    2.553393] NET: Registered PF_INET6 protocol family
[    2.561942] Segment Routing with IPv6
[    2.562706] In-situ OAM (IOAM) with IPv6
[    2.563771] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.568211] NET: Registered PF_PACKET protocol family
[    2.569443] Bridge firewalling registered
[    2.570667] l2tp_core: L2TP core driver, V2.0
[    2.571098] Key type dns_resolver registered
[    2.573008] NET: Registered PF_VSOCK protocol family
[    2.574338] Registering SWP/SWPB emulation handler
[    2.591034] registered taskstats version 1
[    2.611449] Key type .fscrypt registered
[    2.612058] Key type fscrypt-provisioning registered
[    2.620468] Btrfs loaded, zoned=no, fsverity=no
[    2.645550] Key type encrypted registered
[    2.649453] printk: legacy console [netcon0] enabled
[    2.650191] netconsole: network logging started
[    2.696981] IP-Config: Complete:
[    2.698074]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.699818]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.700655]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.700728]      nameserver0=8.8.8.8
[    2.706981] clk: Disabling unused clocks
[    2.713645] md: Waiting for all devices to be available before autodetect
[    2.714492] md: If you don't use raid, use raid=noautodetect
[    2.715006] md: Autodetecting RAID arrays.
[    2.715416] md: autorun ...
[    2.715703] md: ... autorun DONE.
[    2.826364] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.845394] EXT4-fs (vda): mounted filesystem eec3166d-f66b-4c04-994c-31f3408f036b r/w with ordered data mode. Quota mode: disabled.
[    2.850211] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.855470] devtmpfs: mounted
[    3.018127] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.023253] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    3.050938] Freeing unused kernel image (initmem) memory: 2048K
[    3.146976] Run /sbin/init as init process
[    3.216334] usb 1-2: new high-speed USB device number 3 using xhci_hcd
INIT: version 3.11 booting
[    3.377827] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.447582] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.955449] udevd[141]: starting version 3.2.14
[    5.061039] udevd[141]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    5.061984] udevd[141]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    5.084393] udevd[142]: starting eudev-3.2.14
[    5.335752] udevd[142]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    5.337981] udevd[142]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    7.047287] EXT4-fs (vda): re-mounted eec3166d-f66b-4c04-994c-31f3408f036b r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.12.3-yocto-standard #1 SMP PREEMPT Thu Dec 12 17:25:09 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 17 22:24:20 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK
D-BUS per-session daemon address is: unix:path=/tmp/dbus-gqnrkdHaiV,guid=13a1d1a58cd88e75a156d40b6761fa19
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 5.1 qemuarm hvc0

qemuarm login: matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[631]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=615 comm="connman-applet")
matchbox-wm: X error warning (0xc00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[631]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
[ 1258.732903] hellomod: loading out-of-tree module taints kernel.
[ 1258.748758] Hello world!
[ 1264.356061] Cleaning up hellomod.
