[    0.000000] Linux version 6.12.3-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 416662670 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000855] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000884] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000886] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002775] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002874] ACPI: Early table checksum verification disabled
[    0.002875] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002881] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002884] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002887] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002889] ACPI: FACS 0x000000001FFE0000 000040
[    0.002890] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002892] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002894] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002895] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002897] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002897] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002898] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002898] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002899] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002899] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002900] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002925] Zone ranges:
[    0.002926]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002927]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002928]   Normal   empty
[    0.002928] Movable zone start for each node
[    0.002929] Early memory node ranges
[    0.002929]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002930]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002931] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003085] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003106] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004149] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004468] ACPI: PM-Timer IO Port: 0x608
[    0.004474] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004495] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004496] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004498] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004499] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004499] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004500] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004502] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004503] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004504] TSC deadline timer available
[    0.004508] CPU topo: Max. logical packages:   1
[    0.004508] CPU topo: Max. logical dies:       1
[    0.004509] CPU topo: Max. dies per package:   1
[    0.004512] CPU topo: Max. threads per core:   1
[    0.004512] CPU topo: Num. cores per package:     4
[    0.004512] CPU topo: Num. threads per package:   4
[    0.004513] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004522] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004532] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004533] Booting paravirtualized kernel on KVM
[    0.004534] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004537] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004739] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004759] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004802] random: crng init done
[    0.004816] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004826] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004848] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005065] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005547] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005560] ftrace: allocating 53666 entries in 210 pages
[    0.014220] ftrace: allocated 210 pages with 4 groups
[    0.014242] Dynamic Preempt: full
[    0.014407] rcu: Preemptible hierarchical RCU implementation.
[    0.014407] rcu: 	RCU event tracing is enabled.
[    0.014408] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014409] 	All grace periods are expedited (rcu_expedited).
[    0.014409] 	Trampoline variant of Tasks RCU enabled.
[    0.014410] 	Rude variant of Tasks RCU enabled.
[    0.014410] 	Tracing variant of Tasks RCU enabled.
[    0.014410] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014411] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014414] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014416] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014417] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.017847] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018023] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018079] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.022366] Console: colour VGA+ 80x25
[    0.022398] printk: legacy console [ttyS0] enabled
[    0.156719] ACPI: Core revision 20240827
[    0.157478] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.159057] APIC: Switch to symmetric I/O mode setup
[    0.160028] x2apic enabled
[    0.160747] APIC: Switched APIC routing to: physical x2apic
[    0.162656] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.163703] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.165506] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.166629] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.167506] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.168509] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.169508] Spectre V2 : Mitigation: Retpolines
[    0.170506] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.171506] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.172507] Speculative Store Bypass: Vulnerable
[    0.173518] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.174506] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.175507] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.176507] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.177506] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.195984] Freeing SMP alternatives memory: 56K
[    0.196509] pid_max: default: 32768 minimum: 301
[    0.197519] LSM: initializing lsm=capability,landlock
[    0.198403] landlock: Up and running.
[    0.198523] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.199507] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.200694] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.201610] Performance Events: AMD PMU driver.
[    0.202404] ... version:                0
[    0.202509] ... bit width:              48
[    0.203212] ... generic registers:      4
[    0.203510] ... value mask:             0000ffffffffffff
[    0.204449] ... max period:             00007fffffffffff
[    0.204508] ... fixed-purpose events:   0
[    0.205213] ... event mask:             000000000000000f
[    0.205579] signal: max sigframe size: 1776
[    0.206312] rcu: Hierarchical SRCU implementation.
[    0.206518] rcu: 	Max phase no-delay instances is 400.
[    0.207580] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.208714] smp: Bringing up secondary CPUs ...
[    0.209566] smpboot: x86: Booting SMP configuration:
[    0.210523] .... node  #0, CPUs:      #1 #2 #3
[    0.244531] smp: Brought up 1 node, 4 CPUs
[    0.246230] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.246736] Memory: 471760K/523736K available (20480K kernel code, 2433K rwdata, 5776K rodata, 3480K init, 2084K bss, 47760K reserved, 0K cma-reserved)
[    0.247554] devtmpfs: initialized
[    0.248525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.249510] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.250532] pinctrl core: initialized pinctrl subsystem
[    0.251795] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.252593] thermal_sys: Registered thermal governor 'step_wise'
[    0.252594] thermal_sys: Registered thermal governor 'user_space'
[    0.253520] cpuidle: using governor menu
[    0.255285] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.255511] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.256515] PCI: Using configuration type 1 for base access
[    0.257531] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.275663] raid6: sse2x4   gen() 14793 MB/s
[    0.292635] raid6: sse2x2   gen() 13958 MB/s
[    0.309620] raid6: sse2x1   gen()  6410 MB/s
[    0.311513] raid6: using algorithm sse2x4 gen() 14793 MB/s
[    0.329626] raid6: .... xor() 3277 MB/s, rmw enabled
[    0.330420] raid6: using ssse3x2 recovery algorithm
[    0.332568] ACPI: Added _OSI(Module Device)
[    0.333231] ACPI: Added _OSI(Processor Device)
[    0.333509] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.334243] ACPI: Added _OSI(Processor Aggregator Device)
[    0.335898] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.337567] ACPI: Interpreter enabled
[    0.338168] ACPI: PM: (supports S0 S3 S5)
[    0.339510] ACPI: Using IOAPIC for interrupt routing
[    0.340307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.341509] PCI: Using E820 reservations for host bridge windows
[    0.342495] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.343423] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.344512] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.346530] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.347533] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.348542] PCI host bridge to bus 0000:00
[    0.349196] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.350509] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.351508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.352508] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.353508] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.354508] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.355508] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.356420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.358968] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.361457] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.365493] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.372515] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.376515] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.379598] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.384345] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.387365] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.391945] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.394798] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.397513] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.402512] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.404471] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.407060] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.408545] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.409995] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.413515] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.417510] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.422510] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.427066] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.430056] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.431186] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.433938] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.437220] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.439894] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.441189] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.442837] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.446609] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.447868] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.449679] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.454716] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.455951] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.458290] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.461816] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.463223] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.464554] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.465541] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.466524] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.468547] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.469533] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.470546] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.471534] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.472486] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.473512] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.474470] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.475511] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.476457] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.476512] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.477461] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.478511] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.479634] iommu: Default domain type: Translated
[    0.480380] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.482555] SCSI subsystem initialized
[    0.483524] ACPI: bus type USB registered
[    0.483524] usbcore: registered new interface driver usbfs
[    0.484410] usbcore: registered new interface driver hub
[    0.485512] usbcore: registered new device driver usb
[    0.486310] pps_core: LinuxPPS API ver. 1 registered
[    0.486509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.488510] PTP clock support registered
[    0.489630] Bluetooth: Core ver 2.22
[    0.489630] NET: Registered PF_BLUETOOTH protocol family
[    0.490351] Bluetooth: HCI device and connection manager initialized
[    0.491509] Bluetooth: HCI socket layer initialized
[    0.492270] Bluetooth: L2CAP socket layer initialized
[    0.493511] Bluetooth: SCO socket layer initialized
[    0.494513] PCI: Using ACPI for IRQ routing
[    0.540527] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.541506] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.541506] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.544512] vgaarb: loaded
[    0.544962] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.545508] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.549568] clocksource: Switched to clocksource kvm-clock
[    0.550471] pnp: PnP ACPI init
[    0.551056] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.552336] pnp: PnP ACPI: found 5 devices
[    0.560999] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.562429] NET: Registered PF_INET protocol family
[    0.563217] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.564483] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.565802] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.566996] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.568259] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.569390] TCP: Hash tables configured (established 4096 bind 4096)
[    0.570390] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.571925] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.573030] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.574166] RPC: Registered named UNIX socket transport module.
[    0.575111] RPC: Registered udp transport module.
[    0.575868] RPC: Registered tcp transport module.
[    0.576597] RPC: Registered tcp-with-tls transport module.
[    0.577448] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.578457] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.579424] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.580418] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.581503] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.582578] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.583667] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.584935] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.586206] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.587401] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.588677] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.589997] PCI: CLS 0 bytes, default 64
[    0.590678] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.592999] Initialise system trusted keyrings
[    0.593953] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.596744] NFS: Registering the id_resolver key type
[    0.598762] Key type id_resolver registered
[    0.600434] Key type id_legacy registered
[    0.603486] Key type cifs.idmap registered
[    0.611105] xor: automatically using best checksumming function   avx       
[    0.612248] Key type asymmetric registered
[    0.612908] Asymmetric key parser 'x509' registered
[    0.613664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.614852] io scheduler mq-deadline registered
[    0.615557] io scheduler kyber registered
[    0.616204] io scheduler bfq registered
[    0.617074] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.621552] ACPI: button: Power Button [PWRF]
[    0.622817] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.624454] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.626058] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.633180] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.634917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.636045] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.637410] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.639532] Linux agpgart interface v0.103
[    0.640244] ACPI: bus type drm_connector registered
[    0.641082] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.641954] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.644901] Console: switching to colour dummy device 80x25
[    0.645920] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.645921] [drm] features: -context_init
[    0.648027] [drm] number of scanouts: 1
[    0.648641] [drm] number of cap sets: 0
[    0.649727] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.652276] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.676209] Console: switching to colour frame buffer device 160x50
[    0.686990] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.691044] brd: module loaded
[    0.692223] loop: module loaded
[    0.692846] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.694590] virtio_blk virtio3: [vda] 881152 512-byte logical blocks (451 MB/430 MiB)
[    0.698592] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.701885] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.704498] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.706353] scsi host0: ahci
[    0.707060] scsi host1: ahci
[    0.707720] scsi host2: ahci
[    0.708325] scsi host3: ahci
[    0.711099] scsi host4: ahci
[    0.711756] scsi host5: ahci
[    0.712232] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.713546] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.714855] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.716150] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.717439] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.718743] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.721080] e100: Intel(R) PRO/100 Network Driver
[    0.721920] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.722811] e1000: Intel(R) PRO/1000 Network Driver
[    0.723579] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.724487] e1000e: Intel(R) PRO/1000 Network Driver
[    0.725294] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.726225] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.727101] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.728448] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.729961] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.732050] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.734735] hub 1-0:1.0: USB hub found
[    0.736123] hub 1-0:1.0: 2 ports detected
[    0.737168] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.738899] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.741679] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.749535] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.752100] hub 2-0:1.0: USB hub found
[    0.753612] hub 2-0:1.0: 6 ports detected
[    0.775656] hub 1-0:1.0: USB hub found
[    0.776297] hub 1-0:1.0: 2 ports detected
[    0.777116] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.779305] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.782463] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.785063] hub 3-0:1.0: USB hub found
[    0.786575] hub 3-0:1.0: 2 ports detected
[    0.788154] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.789002] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.790370] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.791498] hub 4-0:1.0: USB hub found
[    0.792115] hub 4-0:1.0: 2 ports detected
[    0.792908] usbcore: registered new interface driver usb-storage
[    0.793889] usbcore: registered new interface driver usbserial_generic
[    0.794934] usbserial: USB Serial support registered for generic
[    0.795907] usbcore: registered new interface driver ftdi_sio
[    0.796904] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.798070] usbcore: registered new interface driver pl2303
[    0.798957] usbserial: USB Serial support registered for pl2303
[    0.799914] i8042: PNP: No PS/2 controller found.
[    0.800702] mousedev: PS/2 mouse device common for all mice
[    0.801667] rtc_cmos 00:03: RTC can wake from S4
[    0.802742] rtc_cmos 00:03: registered as rtc0
[    0.803440] rtc_cmos 00:03: setting system clock to 2024-12-20T18:33:20 UTC (1734719600)
[    0.804709] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.806224] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.806245] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.808804] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.810079] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.814095] sdhci: Secure Digital Host Controller Interface driver
[    0.815077] sdhci: Copyright(c) Pierre Ossman
[    0.815790] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.816753] usbcore: registered new interface driver usbhid
[    0.817568] usbhid: USB HID core driver
[    0.818201] u32 classifier
[    0.818608]     input device check on
[    0.819168]     Actions configured
[    0.819722] NET: Registered PF_INET6 protocol family
[    0.820667] Segment Routing with IPv6
[    0.821223] In-situ OAM (IOAM) with IPv6
[    0.821823] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.822787] NET: Registered PF_PACKET protocol family
[    0.823539] Bridge firewalling registered
[    0.824144] l2tp_core: L2TP core driver, V2.0
[    0.824797] Key type dns_resolver registered
[    0.825516] NET: Registered PF_VSOCK protocol family
[    0.826669] IPI shorthand broadcast: enabled
[    0.828041] sched_clock: Marking stable (684001805, 143478397)->(852851300, -25371098)
[    0.830386] registered taskstats version 1
[    0.831889] Loading compiled-in X.509 certificates
[    0.834621] Key type .fscrypt registered
[    0.835958] Key type fscrypt-provisioning registered
[    0.837829] Btrfs loaded, zoned=no, fsverity=no
[    0.840061] Key type encrypted registered
[    0.840900] printk: legacy console [netcon0] enabled
[    0.841690] netconsole: network logging started
[    0.994552] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.025423] ata2: SATA link down (SStatus 0 SControl 300)
[    1.028015] ata1: SATA link down (SStatus 0 SControl 300)
[    1.032884] ata6: SATA link down (SStatus 0 SControl 300)
[    1.034022] ata5: SATA link down (SStatus 0 SControl 300)
[    1.035639] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.036983] ata4: SATA link down (SStatus 0 SControl 300)
[    1.037918] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.038836] ata3.00: applying bridge limits
[    1.039560] ata3.00: configured for UDMA/100
[    1.040521] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.069677] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.072414] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.095508] IP-Config: Complete:
[    1.096928]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.101027]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.103400]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.103402]      nameserver0=8.8.8.8
[    1.105679] clk: Disabling unused clocks
[    1.106569] md: Waiting for all devices to be available before autodetect
[    1.107568] md: If you don't use raid, use raid=noautodetect
[    1.108400] md: Autodetecting RAID arrays.
[    1.109073] md: autorun ...
[    1.109544] md: ... autorun DONE.
[    1.115835] EXT4-fs (vda): mounted filesystem 9f5f359e-fe50-4af3-bca7-75be9f88dcd8 r/w with ordered data mode. Quota mode: disabled.
[    1.119668] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.121692] devtmpfs: mounted
[    1.123277] Freeing unused kernel image (initmem) memory: 3480K
[    1.124285] Write protecting the kernel read-only data: 26624k
[    1.126935] Freeing unused kernel image (rodata/data gap) memory: 368K
[    1.129217] Run /sbin/init as init process
[    1.130093] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.134673] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.11 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.179190] udevd[149]: starting version 3.2.14
[    1.182737] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.184102] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.187613] udevd[150]: starting eudev-3.2.14
[    1.250503] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.383313] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.438076] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.504127] EXT4-fs (vda): re-mounted 9f5f359e-fe50-4af3-bca7-75be9f88dcd8 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...


X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 6.12.3-yocto-standard #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 20 18:33:21 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
D-BUS per-session daemon address is: unix:path=/tmp/dbus-s7Jq0T76Id,guid=1f216de2fc5d3903396595cd6765b871
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
[settings daemon] Forking. run with -n to prevent fork
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[579]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=560 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[579]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCk7yCYDi7ebfWxZqy3OadvUA3fx00xUaaytIz5ZQl9g0Wa1JXblLz5otrBmCr8AHYGDaEfR3i+eHiFXVnuvHS+lWOLGUH46Yv4wwboiqDm54hIxBApNw4jguCaxqTfN/BGUA2gJSdH6M+2WQfxYDYIpKdH3xD9PhShNuAM4jnOLhqST1nM3EzO3f6oPSZaqhOGFdTeV6XhqGHQCfOLabIB8BsYmbZeZ5mykZIg6dgmJdwc+f/sP6/umJ1ivK6+9Nb/1Aj8XrqNLlTC2VYfeBYPl/DjvybYP74umEjo5gI1bWppiMQsqAjYHfvPqF/mvNArtulj8lQfzT6MFdHtff1n root@qemux86-64
Fingerprint: SHA256:dRwgAGU1iEjREQqyx1UX2VLWgr6DDraMqoMJpVa6Y2I
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.048557] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.049340] Bluetooth: BNEP filters: protocol multicast
[    2.050116] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 