[    0.000000] Linux version 6.12.3-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 340781552 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000934] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000968] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000970] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002851] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.003000] ACPI: Early table checksum verification disabled
[    0.003001] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.003007] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003011] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003014] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003016] ACPI: FACS 0x000000001FFE0000 000040
[    0.003017] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003018] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003020] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003021] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003023] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.003024] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.003024] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.003025] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.003025] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.003026] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.003026] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.003053] Zone ranges:
[    0.003053]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003054]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003055]   Normal   empty
[    0.003056] Movable zone start for each node
[    0.003056] Early memory node ranges
[    0.003056]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003057]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003058] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003165] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003186] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004123] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004496] ACPI: PM-Timer IO Port: 0x608
[    0.004504] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004527] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004530] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004531] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004532] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004532] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004534] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004535] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004536] TSC deadline timer available
[    0.004540] CPU topo: Max. logical packages:   1
[    0.004540] CPU topo: Max. logical dies:       1
[    0.004540] CPU topo: Max. dies per package:   1
[    0.004543] CPU topo: Max. threads per core:   1
[    0.004544] CPU topo: Num. cores per package:     4
[    0.004544] CPU topo: Num. threads per package:   4
[    0.004545] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004553] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004563] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004564] Booting paravirtualized kernel on KVM
[    0.004565] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004568] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004744] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004764] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004809] random: crng init done
[    0.004823] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004831] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004855] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005040] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005463] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005476] ftrace: allocating 53666 entries in 210 pages
[    0.014006] ftrace: allocated 210 pages with 4 groups
[    0.014030] Dynamic Preempt: full
[    0.014152] rcu: Preemptible hierarchical RCU implementation.
[    0.014152] rcu: 	RCU event tracing is enabled.
[    0.014153] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014154] 	All grace periods are expedited (rcu_expedited).
[    0.014154] 	Trampoline variant of Tasks RCU enabled.
[    0.014154] 	Rude variant of Tasks RCU enabled.
[    0.014154] 	Tracing variant of Tasks RCU enabled.
[    0.014155] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014155] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014159] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014160] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014161] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.017535] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.017716] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.017763] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023076] Console: colour VGA+ 80x25
[    0.023112] printk: legacy console [ttyS0] enabled
[    0.145648] ACPI: Core revision 20240827
[    0.146381] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147925] APIC: Switch to symmetric I/O mode setup
[    0.148915] x2apic enabled
[    0.149630] APIC: Switched APIC routing to: physical x2apic
[    0.151552] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.152497] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.154160] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.155293] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.156160] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157162] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158161] Spectre V2 : Mitigation: Retpolines
[    0.159161] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.160160] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161160] Speculative Store Bypass: Vulnerable
[    0.162172] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.163160] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.164160] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.165160] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.166160] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.184333] Freeing SMP alternatives memory: 56K
[    0.185079] pid_max: default: 32768 minimum: 301
[    0.185173] LSM: initializing lsm=capability,landlock
[    0.186183] landlock: Up and running.
[    0.187175] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.188161] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.189325] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.190260] Performance Events: AMD PMU driver.
[    0.190976] ... version:                0
[    0.191163] ... bit width:              48
[    0.191797] ... generic registers:      4
[    0.192162] ... value mask:             0000ffffffffffff
[    0.192988] ... max period:             00007fffffffffff
[    0.193162] ... fixed-purpose events:   0
[    0.194162] ... event mask:             000000000000000f
[    0.195014] signal: max sigframe size: 1776
[    0.195186] rcu: Hierarchical SRCU implementation.
[    0.195942] rcu: 	Max phase no-delay instances is 400.
[    0.196184] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.197260] smp: Bringing up secondary CPUs ...
[    0.198039] smpboot: x86: Booting SMP configuration:
[    0.198166] .... node  #0, CPUs:      #1 #2 #3
[    0.232198] smp: Brought up 1 node, 4 CPUs
[    0.233808] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.234465] Memory: 471760K/523736K available (20480K kernel code, 2433K rwdata, 5776K rodata, 3480K init, 2084K bss, 47760K reserved, 0K cma-reserved)
[    0.235210] devtmpfs: initialized
[    0.235916] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.236165] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.237182] pinctrl core: initialized pinctrl subsystem
[    0.238263] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.239243] thermal_sys: Registered thermal governor 'step_wise'
[    0.239244] thermal_sys: Registered thermal governor 'user_space'
[    0.240170] cpuidle: using governor menu
[    0.241280] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.242164] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.243139] PCI: Using configuration type 1 for base access
[    0.243198] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.260535] raid6: sse2x4   gen() 21029 MB/s
[    0.277405] raid6: sse2x2   gen() 25962 MB/s
[    0.294430] raid6: sse2x1   gen()  6994 MB/s
[    0.296163] raid6: using algorithm sse2x2 gen() 25962 MB/s
[    0.313980] raid6: .... xor() 19319 MB/s, rmw enabled
[    0.314164] raid6: using ssse3x2 recovery algorithm
[    0.315011] ACPI: Added _OSI(Module Device)
[    0.316163] ACPI: Added _OSI(Processor Device)
[    0.316874] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.317162] ACPI: Added _OSI(Processor Aggregator Device)
[    0.318397] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.321338] ACPI: Interpreter enabled
[    0.322178] ACPI: PM: (supports S0 S3 S5)
[    0.323165] ACPI: Using IOAPIC for interrupt routing
[    0.324199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.325165] PCI: Using E820 reservations for host bridge windows
[    0.326251] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.328127] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.328167] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.329184] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.330189] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.331199] PCI host bridge to bus 0000:00
[    0.331837] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.332163] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.333144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.333162] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.334162] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.335162] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.336162] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.337016] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.337581] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.339164] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.340800] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.344165] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.346163] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.347669] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.349105] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.350091] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.352983] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.355672] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.357167] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.359166] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.361110] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.363667] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.364214] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.365644] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.367163] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.369163] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.373109] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.374710] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.376611] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.377872] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.381006] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.381848] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.383431] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.384843] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.385486] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.388668] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.389516] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.390353] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.393627] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.395169] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.397774] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.399601] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.401032] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.401208] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.402140] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.402202] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.403113] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.403202] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.404109] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.404201] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.405079] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.405166] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.406166] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.407166] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.408017] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.408165] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.409050] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.409167] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.410247] iommu: Default domain type: Translated
[    0.411033] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.411207] SCSI subsystem initialized
[    0.411842] ACPI: bus type USB registered
[    0.412171] usbcore: registered new interface driver usbfs
[    0.413058] usbcore: registered new interface driver hub
[    0.413172] usbcore: registered new device driver usb
[    0.414074] pps_core: LinuxPPS API ver. 1 registered
[    0.414163] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.415164] PTP clock support registered
[    0.416186] Bluetooth: Core ver 2.22
[    0.416816] NET: Registered PF_BLUETOOTH protocol family
[    0.417163] Bluetooth: HCI device and connection manager initialized
[    0.418163] Bluetooth: HCI socket layer initialized
[    0.419027] Bluetooth: L2CAP socket layer initialized
[    0.419164] Bluetooth: SCO socket layer initialized
[    0.420038] PCI: Using ACPI for IRQ routing
[    0.467249] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.468159] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.468159] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.468166] vgaarb: loaded
[    0.468697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.469162] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.475254] clocksource: Switched to clocksource kvm-clock
[    0.476166] pnp: PnP ACPI init
[    0.476735] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.477997] pnp: PnP ACPI: found 5 devices
[    0.488695] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.490104] NET: Registered PF_INET protocol family
[    0.490867] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.492049] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.493266] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.494416] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.495539] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.496588] TCP: Hash tables configured (established 4096 bind 4096)
[    0.497732] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.498754] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.499850] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.501000] RPC: Registered named UNIX socket transport module.
[    0.501925] RPC: Registered udp transport module.
[    0.502645] RPC: Registered tcp transport module.
[    0.503374] RPC: Registered tcp-with-tls transport module.
[    0.504246] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.505257] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.506221] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.507191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.508260] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.509314] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.510405] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.511641] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.512881] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.514041] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.515966] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.517195] PCI: CLS 0 bytes, default 64
[    0.517865] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.520420] Initialise system trusted keyrings
[    0.521216] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.522341] NFS: Registering the id_resolver key type
[    0.523147] Key type id_resolver registered
[    0.523787] Key type id_legacy registered
[    0.524912] Key type cifs.idmap registered
[    0.532548] xor: automatically using best checksumming function   avx       
[    0.534112] Key type asymmetric registered
[    0.535726] Asymmetric key parser 'x509' registered
[    0.537645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.540525] io scheduler mq-deadline registered
[    0.542318] io scheduler kyber registered
[    0.543026] io scheduler bfq registered
[    0.544010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.546686] ACPI: button: Power Button [PWRF]
[    0.549681] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.554188] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.556625] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.561960] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.563742] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.564845] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.566255] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.568351] Linux agpgart interface v0.103
[    0.569083] ACPI: bus type drm_connector registered
[    0.569922] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.570760] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.573990] Console: switching to colour dummy device 80x25
[    0.574985] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.574986] [drm] features: -context_init
[    0.577787] [drm] number of scanouts: 1
[    0.578404] [drm] number of cap sets: 0
[    0.580421] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.582070] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.597987] Console: switching to colour frame buffer device 160x50
[    0.607972] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.610762] brd: module loaded
[    0.611843] loop: module loaded
[    0.612430] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.614351] virtio_blk virtio3: [vda] 822810 512-byte logical blocks (421 MB/402 MiB)
[    0.617146] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.618426] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.619434] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.620997] scsi host0: ahci
[    0.621615] scsi host1: ahci
[    0.622293] scsi host2: ahci
[    0.622900] scsi host3: ahci
[    0.623510] scsi host4: ahci
[    0.624115] scsi host5: ahci
[    0.624624] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.625968] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.627247] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.628531] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.629802] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.631115] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.633597] e100: Intel(R) PRO/100 Network Driver
[    0.634365] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.635253] e1000: Intel(R) PRO/1000 Network Driver
[    0.636011] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.636936] e1000e: Intel(R) PRO/1000 Network Driver
[    0.637697] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.638623] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.639472] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.640866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.642303] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.643544] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.644589] hub 1-0:1.0: USB hub found
[    0.645183] hub 1-0:1.0: 2 ports detected
[    0.646269] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.648353] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.650276] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.656459] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.657573] hub 2-0:1.0: USB hub found
[    0.658181] hub 2-0:1.0: 6 ports detected
[    0.680583] hub 1-0:1.0: USB hub found
[    0.681863] hub 1-0:1.0: 2 ports detected
[    0.683649] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.685835] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.689064] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.691634] hub 3-0:1.0: USB hub found
[    0.692310] hub 3-0:1.0: 2 ports detected
[    0.693580] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.694512] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.695898] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.697247] hub 4-0:1.0: USB hub found
[    0.697922] hub 4-0:1.0: 2 ports detected
[    0.698708] usbcore: registered new interface driver usb-storage
[    0.699783] usbcore: registered new interface driver usbserial_generic
[    0.700954] usbserial: USB Serial support registered for generic
[    0.702175] usbcore: registered new interface driver ftdi_sio
[    0.703185] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.704465] usbcore: registered new interface driver pl2303
[    0.705427] usbserial: USB Serial support registered for pl2303
[    0.706474] i8042: PNP: No PS/2 controller found.
[    0.707350] mousedev: PS/2 mouse device common for all mice
[    0.708400] rtc_cmos 00:03: RTC can wake from S4
[    0.709620] rtc_cmos 00:03: registered as rtc0
[    0.710462] rtc_cmos 00:03: setting system clock to 2024-12-26T09:56:36 UTC (1735206996)
[    0.711920] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.713473] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.715168] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.715201] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.719465] sdhci: Secure Digital Host Controller Interface driver
[    0.719658] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.720509] sdhci: Copyright(c) Pierre Ossman
[    0.720523] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.720565] usbcore: registered new interface driver usbhid
[    0.726564] usbhid: USB HID core driver
[    0.727921] u32 classifier
[    0.729035]     input device check on
[    0.730509]     Actions configured
[    0.732032] NET: Registered PF_INET6 protocol family
[    0.736338] Segment Routing with IPv6
[    0.737027] In-situ OAM (IOAM) with IPv6
[    0.737703] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.738787] NET: Registered PF_PACKET protocol family
[    0.739693] Bridge firewalling registered
[    0.740396] l2tp_core: L2TP core driver, V2.0
[    0.741185] Key type dns_resolver registered
[    0.741953] NET: Registered PF_VSOCK protocol family
[    0.743113] IPI shorthand broadcast: enabled
[    0.744599] sched_clock: Marking stable (612003383, 132439430)->(818474307, -74031494)
[    0.747518] registered taskstats version 1
[    0.749210] Loading compiled-in X.509 certificates
[    0.752650] Key type .fscrypt registered
[    0.754274] Key type fscrypt-provisioning registered
[    0.755385] Btrfs loaded, zoned=no, fsverity=no
[    0.756886] Key type encrypted registered
[    0.757737] printk: legacy console [netcon0] enabled
[    0.758611] netconsole: network logging started
[    0.894478] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.939669] ata4: SATA link down (SStatus 0 SControl 300)
[    0.942571] ata6: SATA link down (SStatus 0 SControl 300)
[    0.944236] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.946716] ata2: SATA link down (SStatus 0 SControl 300)
[    0.948413] ata5: SATA link down (SStatus 0 SControl 300)
[    0.949429] ata1: SATA link down (SStatus 0 SControl 300)
[    0.950401] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.952043] ata3.00: applying bridge limits
[    0.953030] ata3.00: configured for UDMA/100
[    0.954250] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.983801] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.988558] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.011472] IP-Config: Complete:
[    1.013310]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.017336]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.018540]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.018542]      nameserver0=8.8.8.8
[    1.020864] clk: Disabling unused clocks
[    1.021988] md: Waiting for all devices to be available before autodetect
[    1.023105] md: If you don't use raid, use raid=noautodetect
[    1.024027] md: Autodetecting RAID arrays.
[    1.024839] md: autorun ...
[    1.025380] md: ... autorun DONE.
[    1.029962] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.032951] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.033230] EXT4-fs (vda): mounted filesystem 15af3d6e-5d94-4f57-862d-8031896bb4bc r/w with ordered data mode. Quota mode: disabled.
[    1.036637] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.037540] devtmpfs: mounted
[    1.038609] Freeing unused kernel image (initmem) memory: 3480K
[    1.039468] Write protecting the kernel read-only data: 26624k
[    1.040576] Freeing unused kernel image (rodata/data gap) memory: 368K
[    1.041523] Run /sbin/init as init process
INIT: version 3.11 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.094739] udevd[148]: starting version 3.2.14
[    1.100295] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.101778] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.103674] udevd[149]: starting eudev-3.2.14
[    1.147503] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.280276] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.335082] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.401108] EXT4-fs (vda): re-mounted 15af3d6e-5d94-4f57-862d-8031896bb4bc r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.120 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.120 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.120 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCFS71lO/+hchQKzjLsPRNAQgNIX5dqg220fki4JFrrnQbQ63oPDinDjp9K4KlMFmimnMbSdVZj5aN3J4N8aUF8Ii5y92VVcQBZKOBDVzqIEb24/kml7/A93h3FRKA72sA5YOZa0xN6XAzNkaL+c32ft1/ccMqb+iKQ8cr9pLL3SSlSVBcPY3BRanB+g2Liub7qN7pgBMcRf7d+fWpU8lAcQdeHXG29Zw1PlTLtWs6LTVzv720aPrkZlr6EkLWBAlJqhOaTM3NFJTgWQWzAg9Hb/lJiZnsWigoGmXIzz0YuzmlJLQwPnQmCyDgfmBr8hAE5/QwFxk/HB0LY/84+NkEF root@qemux86-64
Fingerprint: SHA256:V2/pauYWq28bS843+UKCEFTFAN7AjaUHi6hLXJJusFI
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.716455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.717192] Bluetooth: BNEP filters: protocol multicast
[    1.718017] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: [   65.007714] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[   65.011158] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
00:01:03.483 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5985, uid: 0, gid: 0)[0m
00:01:03.487 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:03.487 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
