[ 0.000000] Linux version 6.6.54-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Tue Oct 8 03:14:29 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238976K/262140K available (14454K kernel code, 1473K rwdata, 2772K rodata, 424K init, 395K bss, 23164K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945467009 ns [ 0.000198] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421873148ns [ 0.012293] Console: colour dummy device 80x25 [ 0.013594] printk: console [tty0] enabled [ 0.014687] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.54-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Tue Oct 8 03:14:29 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238976K/262140K available (14454K kernel code, 1473K rwdata, 2772K rodata, 424K init, 395K bss, 23164K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945467009 ns [ 0.000198] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421873148ns [ 0.012293] Console: colour dummy device 80x25 [ 0.013594] printk: console [tty0] enabled [ 0.014687] printk: bootconsole [uart8250] disabled [ 0.017273] Calibrating delay loop... 1042.02 BogoMIPS (lpj=5210112) [ 0.144315] pid_max: default: 32768 minimum: 301 [ 0.145784] LSM: initializing lsm=capability,landlock,integrity [ 0.146365] landlock: Up and running. [ 0.149394] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.149591] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.189698] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190022] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190864] Performance counters: No available PMU. [ 0.191731] rcu: Hierarchical SRCU implementation. [ 0.191788] rcu: Max phase no-delay instances is 1000. [ 0.199802] smp: Bringing up secondary CPUs ... [ 0.200198] smp: Brought up 1 node, 1 CPU [ 0.213804] devtmpfs: initialized [ 0.220905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.221113] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.230421] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.609114] raid6: int32x8 gen() 275 MB/s [ 0.952116] raid6: int32x4 gen() 794 MB/s [ 1.306623] raid6: int32x2 gen() 890 MB/s [ 1.495237] raid6: int32x1 gen() 665 MB/s [ 1.495357] raid6: using algorithm int32x2 gen() 890 MB/s [ 1.662841] raid6: .... xor() 523 MB/s, rmw enabled [ 1.663005] raid6: using intx1 recovery algorithm [ 1.665849] SCSI subsystem initialized [ 1.666370] usbcore: registered new interface driver usbfs [ 1.666663] usbcore: registered new interface driver hub [ 1.666853] usbcore: registered new device driver usb [ 1.667198] pps_core: LinuxPPS API ver. 1 registered [ 1.667246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.667373] PTP clock support registered [ 1.684539] PCI host bridge to bus 0000:00 [ 1.684941] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.685479] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.685643] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.687178] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 1.687919] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 1.688064] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.688200] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.688278] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.688362] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.688444] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.690952] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.691682] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.691982] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.692116] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.692181] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.692257] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.692316] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.692662] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.692812] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.693541] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.694060] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.694199] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.694737] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.694822] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.694945] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.695032] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.695437] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.695523] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.695639] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.695760] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.696112] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.696194] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.696288] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.696657] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.696738] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.696833] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.697492] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.698880] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.699181] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.699296] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.699378] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.699512] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.699596] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.699701] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.699789] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.699855] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.699903] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.699958] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.700013] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.701870] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.701986] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.702082] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.702205] vgaarb: loaded [ 1.704344] clocksource: Switched to clocksource MIPS [ 1.726887] NET: Registered PF_INET protocol family [ 1.728009] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.736490] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.736877] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.737134] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.737578] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.737970] TCP: Hash tables configured (established 2048 bind 2048) [ 1.740548] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.741116] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.743526] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.746008] RPC: Registered named UNIX socket transport module. [ 1.746103] RPC: Registered udp transport module. [ 1.746144] RPC: Registered tcp transport module. [ 1.746180] RPC: Registered tcp-with-tls transport module. [ 1.746217] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.746938] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.747838] PCI: CLS 0 bytes, default 16 [ 1.756140] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.759179] NFS: Registering the id_resolver key type [ 1.760494] Key type id_resolver registered [ 1.760566] Key type id_legacy registered [ 1.762430] Key type cifs.idmap registered [ 2.054952] xor: measuring software checksum speed [ 2.057805] 8regs : 1230 MB/sec [ 2.060748] 8regs_prefetch : 1136 MB/sec [ 2.063374] 32regs : 1270 MB/sec [ 2.066402] 32regs_prefetch : 1098 MB/sec [ 2.066479] xor: using function: 32regs (1270 MB/sec) [ 2.066880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.067066] io scheduler mq-deadline registered [ 2.067159] io scheduler kyber registered [ 2.072410] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.079659] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.081421] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.084996] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.094767] printk: console [ttyS0] disabled [ 2.118903] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.119047] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.120784] printk: console [ttyS0] enabled [ 2.240776] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.241559] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.241882] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.250148] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.252298] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.253566] [drm] Found bochs VGA, ID 0xb0c5. [ 2.254260] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.258414] [drm] Found EDID data blob. [ 2.265472] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.345104] Console: switching to colour frame buffer device 160x50 [ 2.356820] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.401392] brd: module loaded [ 2.403311] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.410559] virtio_blk virtio2: [vda] 1140832 512-byte logical blocks (584 MB/557 MiB) [ 2.434861] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.436559] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.440712] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.453308] hub 1-0:1.0: USB hub found [ 2.454454] hub 1-0:1.0: 2 ports detected [ 2.461166] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.465446] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.469249] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.473026] usbcore: registered new interface driver usbhid [ 2.476093] usbhid: USB HID core driver [ 2.477822] u32 classifier [ 2.478580] input device check on [ 2.479361] Actions configured [ 2.482013] NET: Registered PF_INET6 protocol family [ 2.490004] Segment Routing with IPv6 [ 2.490940] In-situ OAM (IOAM) with IPv6 [ 2.492173] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.500314] NET: Registered PF_PACKET protocol family [ 2.502477] Bridge firewalling registered [ 2.505158] Key type dns_resolver registered [ 2.506691] NET: Registered PF_VSOCK protocol family [ 2.529157] registered taskstats version 1 [ 2.561489] Key type .fscrypt registered [ 2.584334] Key type fscrypt-provisioning registered [ 2.595806] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.603399] Btrfs loaded, zoned=no, fsverity=no [ 2.663466] Key type encrypted registered [ 2.672647] printk: console [netcon0] enabled [ 2.693611] netconsole: network logging started [ 2.784379] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.053431] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.061059] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.286884] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.344749] IP-Config: Complete: [ 3.352662] device=eth0, hwaddr=52:54:00:12:34:1c, ipaddr=192.168.7.28, mask=255.255.255.0, gw=192.168.7.27 [ 3.362068] host=192.168.7.28, domain=, nis-domain=(none) [ 3.381327] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.381420] nameserver0=8.8.8.8 [ 3.399357] clk: Disabling unused clocks [ 3.421130] md: Waiting for all devices to be available before autodetect [ 3.428516] md: If you don't use raid, use raid=noautodetect [ 3.442036] md: Autodetecting RAID arrays. [ 3.448694] md: autorun ... [ 3.453213] md: ... autorun DONE. [ 3.513388] EXT4-fs (vda): mounted filesystem 3310b447-505a-4da9-94f2-096d4a9dffab r/w with ordered data mode. Quota mode: disabled. [ 3.525950] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.542851] devtmpfs: mounted [ 3.608715] Freeing unused kernel image (initmem) memory: 424K [ 3.613912] This architecture does not have kernel memory protection. [ 3.617964] Run /sbin/init as init process [ 3.650411] process '/sbin/init.sysvinit' started with executable stack [ 7.947985] udevd[93]: starting version 3.2.14 [ 8.144537] udevd[94]: starting eudev-3.2.14 [ 15.716006] EXT4-fs (vda): re-mounted 3310b447-505a-4da9-94f2-096d4a9dffab r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.14 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.54-yocto-standard #1 SMP PREEMPT Tue Oct 8 03:14:29 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 31 17:12:26 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.6 qemumips /dev/ttyS0 qemumips login: