[    0.000000] Linux version 6.12.3-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 421683152 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000868] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000900] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000903] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002804] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002885] ACPI: Early table checksum verification disabled
[    0.002887] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002892] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002897] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002900] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002902] ACPI: FACS 0x000000001FFE0000 000040
[    0.002903] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002905] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002907] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002908] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002910] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002911] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002911] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002912] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002912] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002913] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002913] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002944] Zone ranges:
[    0.002944]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002946]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002947]   Normal   empty
[    0.002947] Movable zone start for each node
[    0.002947] Early memory node ranges
[    0.002948]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002949]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002950] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003062] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003083] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004009] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004362] ACPI: PM-Timer IO Port: 0x608
[    0.004369] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004391] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004393] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004394] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004395] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004396] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004397] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004399] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004400] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004402] TSC deadline timer available
[    0.004405] CPU topo: Max. logical packages:   1
[    0.004406] CPU topo: Max. logical dies:       1
[    0.004406] CPU topo: Max. dies per package:   1
[    0.004410] CPU topo: Max. threads per core:   1
[    0.004410] CPU topo: Num. cores per package:     4
[    0.004411] CPU topo: Num. threads per package:   4
[    0.004411] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004420] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004432] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004433] Booting paravirtualized kernel on KVM
[    0.004435] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004438] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004602] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004623] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004672] random: crng init done
[    0.004688] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004698] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004725] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004875] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005294] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005308] ftrace: allocating 53666 entries in 210 pages
[    0.015165] ftrace: allocated 210 pages with 4 groups
[    0.015204] Dynamic Preempt: full
[    0.015339] rcu: Preemptible hierarchical RCU implementation.
[    0.015339] rcu: 	RCU event tracing is enabled.
[    0.015340] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.015341] 	All grace periods are expedited (rcu_expedited).
[    0.015342] 	Trampoline variant of Tasks RCU enabled.
[    0.015342] 	Rude variant of Tasks RCU enabled.
[    0.015342] 	Tracing variant of Tasks RCU enabled.
[    0.015343] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.015344] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.015348] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.015350] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.015351] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018840] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019034] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019103] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023501] Console: colour VGA+ 80x25
[    0.023540] printk: legacy console [ttyS0] enabled
[    0.140496] ACPI: Core revision 20240827
[    0.141266] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.142868] APIC: Switch to symmetric I/O mode setup
[    0.143890] x2apic enabled
[    0.144605] APIC: Switched APIC routing to: physical x2apic
[    0.146483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.147549] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.149361] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.150490] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.151362] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.152364] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.153364] Spectre V2 : Mitigation: Retpolines
[    0.154363] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.155363] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.156363] Speculative Store Bypass: Vulnerable
[    0.157378] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.158363] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.159363] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.160363] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.161363] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.181602] Freeing SMP alternatives memory: 56K
[    0.182366] pid_max: default: 32768 minimum: 301
[    0.183381] LSM: initializing lsm=capability,landlock
[    0.184391] landlock: Up and running.
[    0.185389] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.186364] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.188465] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.189475] Performance Events: AMD PMU driver.
[    0.190368] ... version:                0
[    0.191268] ... bit width:              48
[    0.191366] ... generic registers:      4
[    0.192270] ... value mask:             0000ffffffffffff
[    0.192366] ... max period:             00007fffffffffff
[    0.193366] ... fixed-purpose events:   0
[    0.194261] ... event mask:             000000000000000f
[    0.194441] signal: max sigframe size: 1776
[    0.195398] rcu: Hierarchical SRCU implementation.
[    0.196366] rcu: 	Max phase no-delay instances is 400.
[    0.197403] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.198484] smp: Bringing up secondary CPUs ...
[    0.199437] smpboot: x86: Booting SMP configuration:
[    0.200371] .... node  #0, CPUs:      #1 #2 #3
[    0.234381] smp: Brought up 1 node, 4 CPUs
[    0.236070] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.236622] Memory: 471756K/523736K available (20480K kernel code, 2433K rwdata, 5776K rodata, 3480K init, 2084K bss, 47764K reserved, 0K cma-reserved)
[    0.237422] devtmpfs: initialized
[    0.238393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.239365] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.240391] pinctrl core: initialized pinctrl subsystem
[    0.241642] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.242452] thermal_sys: Registered thermal governor 'step_wise'
[    0.242453] thermal_sys: Registered thermal governor 'user_space'
[    0.243374] cpuidle: using governor menu
[    0.245058] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.245366] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.246289] PCI: Using configuration type 1 for base access
[    0.246398] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.264364] raid6: sse2x4   gen() 15038 MB/s
[    0.281364] raid6: sse2x2   gen() 14132 MB/s
[    0.298366] raid6: sse2x1   gen()  8531 MB/s
[    0.299136] raid6: using algorithm sse2x4 gen() 15038 MB/s
[    0.316365] raid6: .... xor() 3513 MB/s, rmw enabled
[    0.317014] raid6: using ssse3x2 recovery algorithm
[    0.317422] ACPI: Added _OSI(Module Device)
[    0.317980] ACPI: Added _OSI(Processor Device)
[    0.318364] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.318994] ACPI: Added _OSI(Processor Aggregator Device)
[    0.319755] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.320946] ACPI: Interpreter enabled
[    0.321372] ACPI: PM: (supports S0 S3 S5)
[    0.321919] ACPI: Using IOAPIC for interrupt routing
[    0.322376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.323363] PCI: Using E820 reservations for host bridge windows
[    0.324201] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.325280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.325367] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.326382] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.327221] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.327395] PCI host bridge to bus 0000:00
[    0.327950] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.328364] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.329271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.329363] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.330349] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.330363] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.331364] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.332345] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.332803] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.334365] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.336218] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.340364] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.342365] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.343905] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.345364] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.346989] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.350184] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.352312] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.353367] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.356830] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.358252] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.359743] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.360405] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.361884] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.363365] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.364921] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.368365] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.372949] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.374874] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.375972] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.377655] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.379795] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.381591] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.383009] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.383671] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.386071] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.386741] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.387539] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.390587] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.391790] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.393116] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.394729] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.396056] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.396411] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.397406] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.398404] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.399405] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.400405] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.401405] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.402421] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.403388] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.404369] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.405367] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.406367] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.407367] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.408367] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.409367] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.410367] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.411559] iommu: Default domain type: Translated
[    0.412365] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.413409] SCSI subsystem initialized
[    0.414071] ACPI: bus type USB registered
[    0.414373] usbcore: registered new interface driver usbfs
[    0.415320] usbcore: registered new interface driver hub
[    0.415368] usbcore: registered new device driver usb
[    0.416240] pps_core: LinuxPPS API ver. 1 registered
[    0.416364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.417366] PTP clock support registered
[    0.418488] Bluetooth: Core ver 2.22
[    0.419166] NET: Registered PF_BLUETOOTH protocol family
[    0.419364] Bluetooth: HCI device and connection manager initialized
[    0.420364] Bluetooth: HCI socket layer initialized
[    0.421188] Bluetooth: L2CAP socket layer initialized
[    0.421365] Bluetooth: SCO socket layer initialized
[    0.422208] PCI: Using ACPI for IRQ routing
[    0.470787] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.471361] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.471361] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.471367] vgaarb: loaded
[    0.471856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.472364] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.476473] clocksource: Switched to clocksource kvm-clock
[    0.477422] pnp: PnP ACPI init
[    0.478058] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.479437] pnp: PnP ACPI: found 5 devices
[    0.486224] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.487781] NET: Registered PF_INET protocol family
[    0.488660] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.490020] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.491386] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.492671] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.493951] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.495130] TCP: Hash tables configured (established 4096 bind 4096)
[    0.496159] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.497766] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.498916] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.500020] RPC: Registered named UNIX socket transport module.
[    0.500992] RPC: Registered udp transport module.
[    0.501765] RPC: Registered tcp transport module.
[    0.502550] RPC: Registered tcp-with-tls transport module.
[    0.503456] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.504525] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.505551] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.506558] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.507663] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.508786] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.509886] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.511206] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.512473] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.513641] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.514809] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.516082] PCI: CLS 0 bytes, default 64
[    0.516807] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.518970] Initialise system trusted keyrings
[    0.519795] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.520972] NFS: Registering the id_resolver key type
[    0.521801] Key type id_resolver registered
[    0.522481] Key type id_legacy registered
[    0.523379] Key type cifs.idmap registered
[    0.531006] xor: automatically using best checksumming function   avx       
[    0.532156] Key type asymmetric registered
[    0.532842] Asymmetric key parser 'x509' registered
[    0.533645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.534836] io scheduler mq-deadline registered
[    0.535584] io scheduler kyber registered
[    0.536234] io scheduler bfq registered
[    0.537081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.541349] ACPI: button: Power Button [PWRF]
[    0.542528] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.544195] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.545806] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.549281] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.550888] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.552042] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.553549] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.555594] Linux agpgart interface v0.103
[    0.556785] ACPI: bus type drm_connector registered
[    0.557651] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.558552] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.561384] Console: switching to colour dummy device 80x25
[    0.562420] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.562421] [drm] features: -context_init
[    0.564594] [drm] number of scanouts: 1
[    0.565221] [drm] number of cap sets: 0
[    0.566015] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.567770] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.582117] Console: switching to colour frame buffer device 160x50
[    0.595429] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.598179] brd: module loaded
[    0.599286] loop: module loaded
[    0.599952] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.601798] virtio_blk virtio3: [vda] 817922 512-byte logical blocks (419 MB/399 MiB)
[    0.604960] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.606371] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.607478] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.609035] scsi host0: ahci
[    0.609691] scsi host1: ahci
[    0.610282] scsi host2: ahci
[    0.610901] scsi host3: ahci
[    0.611516] scsi host4: ahci
[    0.612123] scsi host5: ahci
[    0.612667] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.614165] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.615583] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.617029] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.618431] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.619833] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.622973] e100: Intel(R) PRO/100 Network Driver
[    0.623852] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.624816] e1000: Intel(R) PRO/1000 Network Driver
[    0.625656] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.626646] e1000e: Intel(R) PRO/1000 Network Driver
[    0.627498] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.628518] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.629428] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.631259] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.632746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.634098] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.635244] hub 1-0:1.0: USB hub found
[    0.635905] hub 1-0:1.0: 2 ports detected
[    0.636849] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.638544] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.640402] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.647366] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.648918] hub 2-0:1.0: USB hub found
[    0.649825] hub 2-0:1.0: 6 ports detected
[    0.671489] hub 1-0:1.0: USB hub found
[    0.672459] hub 1-0:1.0: 2 ports detected
[    0.673483] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.674396] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.675773] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.676982] hub 3-0:1.0: USB hub found
[    0.677658] hub 3-0:1.0: 2 ports detected
[    0.678876] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.679799] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.681158] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.682344] hub 4-0:1.0: USB hub found
[    0.683015] hub 4-0:1.0: 2 ports detected
[    0.683811] usbcore: registered new interface driver usb-storage
[    0.684859] usbcore: registered new interface driver usbserial_generic
[    0.685977] usbserial: USB Serial support registered for generic
[    0.687016] usbcore: registered new interface driver ftdi_sio
[    0.688081] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.689351] usbcore: registered new interface driver pl2303
[    0.690298] usbserial: USB Serial support registered for pl2303
[    0.691335] i8042: PNP: No PS/2 controller found.
[    0.692313] mousedev: PS/2 mouse device common for all mice
[    0.693358] rtc_cmos 00:03: RTC can wake from S4
[    0.694558] rtc_cmos 00:03: registered as rtc0
[    0.695385] rtc_cmos 00:03: setting system clock to 2025-01-01T12:03:40 UTC (1735733020)
[    0.696851] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.698328] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.698518] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.699928] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.701272] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.702465] sdhci: Secure Digital Host Controller Interface driver
[    0.705091] sdhci: Copyright(c) Pierre Ossman
[    0.705850] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.706902] usbcore: registered new interface driver usbhid
[    0.707855] usbhid: USB HID core driver
[    0.708542] u32 classifier
[    0.709009]     input device check on
[    0.709637]     Actions configured
[    0.710307] NET: Registered PF_INET6 protocol family
[    0.711374] Segment Routing with IPv6
[    0.712020] In-situ OAM (IOAM) with IPv6
[    0.712729] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.713819] NET: Registered PF_PACKET protocol family
[    0.714702] Bridge firewalling registered
[    0.715393] l2tp_core: L2TP core driver, V2.0
[    0.716151] Key type dns_resolver registered
[    0.716961] NET: Registered PF_VSOCK protocol family
[    0.718098] IPI shorthand broadcast: enabled
[    0.719700] sched_clock: Marking stable (593001691, 126321425)->(792745017, -73421901)
[    0.721120] registered taskstats version 1
[    0.721850] Loading compiled-in X.509 certificates
[    0.723448] Key type .fscrypt registered
[    0.724129] Key type fscrypt-provisioning registered
[    0.725137] Btrfs loaded, zoned=no, fsverity=no
[    0.726460] Key type encrypted registered
[    0.727208] printk: legacy console [netcon0] enabled
[    0.728103] netconsole: network logging started
[    0.889353] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.926890] ata1: SATA link down (SStatus 0 SControl 300)
[    0.927977] ata2: SATA link down (SStatus 0 SControl 300)
[    0.929079] ata6: SATA link down (SStatus 0 SControl 300)
[    0.930406] ata5: SATA link down (SStatus 0 SControl 300)
[    0.931471] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.932696] ata4: SATA link down (SStatus 0 SControl 300)
[    0.933747] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.934716] ata3.00: applying bridge limits
[    0.935498] ata3.00: configured for UDMA/100
[    0.936498] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.964507] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.965694] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.987343] IP-Config: Complete:
[    0.988818]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    0.993031]      host=192.168.7.4, domain=, nis-domain=(none)
[    0.995498]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.995501]      nameserver0=8.8.8.8
[    1.000554] clk: Disabling unused clocks
[    1.002878] md: Waiting for all devices to be available before autodetect
[    1.005446] md: If you don't use raid, use raid=noautodetect
[    1.007482] md: Autodetecting RAID arrays.
[    1.008960] md: autorun ...
[    1.009960] md: ... autorun DONE.
[    1.016150] EXT4-fs (vda): mounted filesystem 5d8cabe3-79fe-41ab-9d58-a92f0a3fb265 r/w with ordered data mode. Quota mode: disabled.
[    1.020669] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.021162] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.022888] devtmpfs: mounted
[    1.026880] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.032159] Freeing unused kernel image (initmem) memory: 3480K
[    1.034290] Write protecting the kernel read-only data: 26624k
[    1.036758] Freeing unused kernel image (rodata/data gap) memory: 368K
[    1.039030] Run /sbin/init as init process
INIT: version 3.11 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.102662] udevd[147]: starting version 3.2.14
[    1.108380] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.112163] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.116379] udevd[148]: starting eudev-3.2.14
[    1.143333] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.274763] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.327734] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.386965] EXT4-fs (vda): re-mounted 5d8cabe3-79fe-41ab-9d58-a92f0a3fb265 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.118 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.118 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.118 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCOb9moIr2dezjHNT2hOuBTDGqgDAcV1JZxOupScnn2HVz/wRi5Mmthq8s8D7An2BNknZn/fMsMgJc/DwpzcjhiWJthn1ZFYvlCLY3zStnK1oVifz4AlIPlYiX4fu5fdJFQB7HHIQnm50FjOvsCT14zUIMUaqtjWj6qmJKNQGz/0RZTCittErzsAFcz12cCxWq0nKq8jHljffRA9Hnqk+8ciipHaa+Jl9uRhxwwVKB9rAbRXZ43V4bU7/LPrH9M31RZ7IsYprJ6G29Jvx/IvArlD68Hj6WldVoVdB0GtXTiSOceOEjvnTD8c9KQ1OOMA+yTcB1r6zfskMEzq6r74JZH root@qemux86-64
Fingerprint: SHA256:o9e8tZN5FieNXq17eooF0w0S6n1HiUcnseS70O7mLD8
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.657864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.658874] Bluetooth: BNEP filters: protocol multicast
[    1.659841] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
xkbcommon: ERROR: couldn't find a Compose file for locale "C" (mapped to "C")
could not create XKB compose table for locale 'C'.  Disabiling compose
[   62.558161] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
00:01:01.075 [1[   62.560340] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5985, uid: 0, gid: 0)[0m
00:01:01.080 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:01.083 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
