[    0.000000] Linux version 6.12.3-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 387539811 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000862] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000892] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000895] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002770] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002886] ACPI: Early table checksum verification disabled
[    0.002887] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002892] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002896] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002899] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002901] ACPI: FACS 0x000000001FFE0000 000040
[    0.002903] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002904] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002906] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002907] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002909] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002909] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002910] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002910] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002911] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002911] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002912] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002937] Zone ranges:
[    0.002938]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002939]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002940]   Normal   empty
[    0.002940] Movable zone start for each node
[    0.002940] Early memory node ranges
[    0.002941]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002942]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002943] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003043] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003063] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003989] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004334] ACPI: PM-Timer IO Port: 0x608
[    0.004340] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004361] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004362] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004364] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004364] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004365] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004366] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004368] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004369] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004370] TSC deadline timer available
[    0.004374] CPU topo: Max. logical packages:   1
[    0.004374] CPU topo: Max. logical dies:       1
[    0.004374] CPU topo: Max. dies per package:   1
[    0.004378] CPU topo: Max. threads per core:   1
[    0.004378] CPU topo: Num. cores per package:     4
[    0.004379] CPU topo: Num. threads per package:   4
[    0.004379] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004388] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004398] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004399] Booting paravirtualized kernel on KVM
[    0.004400] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004403] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004569] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004589] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004634] random: crng init done
[    0.004649] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004658] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004682] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004876] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005287] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005300] ftrace: allocating 53666 entries in 210 pages
[    0.014018] ftrace: allocated 210 pages with 4 groups
[    0.014042] Dynamic Preempt: full
[    0.014156] rcu: Preemptible hierarchical RCU implementation.
[    0.014157] rcu: 	RCU event tracing is enabled.
[    0.014157] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014158] 	All grace periods are expedited (rcu_expedited).
[    0.014158] 	Trampoline variant of Tasks RCU enabled.
[    0.014159] 	Rude variant of Tasks RCU enabled.
[    0.014159] 	Tracing variant of Tasks RCU enabled.
[    0.014159] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014160] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014163] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014164] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014165] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.017555] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.017737] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.017796] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024400] Console: colour VGA+ 80x25
[    0.024435] printk: legacy console [ttyS0] enabled
[    0.145195] ACPI: Core revision 20240827
[    0.145930] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147543] APIC: Switch to symmetric I/O mode setup
[    0.148529] x2apic enabled
[    0.149232] APIC: Switched APIC routing to: physical x2apic
[    0.151083] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.152107] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.153901] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.155029] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.155901] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.156903] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.157902] Spectre V2 : Mitigation: Retpolines
[    0.158901] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.159901] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.160901] Speculative Store Bypass: Vulnerable
[    0.161913] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.162901] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.163901] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.164901] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.165901] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.183947] Freeing SMP alternatives memory: 56K
[    0.184755] pid_max: default: 32768 minimum: 301
[    0.184913] LSM: initializing lsm=capability,landlock
[    0.185926] landlock: Up and running.
[    0.186917] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.187901] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.189075] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.190001] Performance Events: AMD PMU driver.
[    0.190780] ... version:                0
[    0.190904] ... bit width:              48
[    0.191591] ... generic registers:      4
[    0.191903] ... value mask:             0000ffffffffffff
[    0.192811] ... max period:             00007fffffffffff
[    0.192903] ... fixed-purpose events:   0
[    0.193602] ... event mask:             000000000000000f
[    0.193968] signal: max sigframe size: 1776
[    0.194670] rcu: Hierarchical SRCU implementation.
[    0.194903] rcu: 	Max phase no-delay instances is 400.
[    0.195821] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.196001] smp: Bringing up secondary CPUs ...
[    0.196850] smpboot: x86: Booting SMP configuration:
[    0.196906] .... node  #0, CPUs:      #1 #2 #3
[    0.231943] smp: Brought up 1 node, 4 CPUs
[    0.232905] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.234231] Memory: 471756K/523736K available (20480K kernel code, 2433K rwdata, 5776K rodata, 3480K init, 2084K bss, 47764K reserved, 0K cma-reserved)
[    0.234950] devtmpfs: initialized
[    0.235709] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.235905] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.236924] pinctrl core: initialized pinctrl subsystem
[    0.238043] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.238981] thermal_sys: Registered thermal governor 'step_wise'
[    0.238989] thermal_sys: Registered thermal governor 'user_space'
[    0.239911] cpuidle: using governor menu
[    0.241683] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.241904] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.242909] PCI: Using configuration type 1 for base access
[    0.243921] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.261137] raid6: sse2x4   gen()  9974 MB/s
[    0.279910] raid6: sse2x2   gen()  9959 MB/s
[    0.297885] raid6: sse2x1   gen()  5027 MB/s
[    0.298907] raid6: using algorithm sse2x4 gen() 9974 MB/s
[    0.317519] raid6: .... xor() 2906 MB/s, rmw enabled
[    0.318904] raid6: using ssse3x2 recovery algorithm
[    0.319816] ACPI: Added _OSI(Module Device)
[    0.320904] ACPI: Added _OSI(Processor Device)
[    0.321679] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.321903] ACPI: Added _OSI(Processor Aggregator Device)
[    0.323311] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.325987] ACPI: Interpreter enabled
[    0.326913] ACPI: PM: (supports S0 S3 S5)
[    0.327715] ACPI: Using IOAPIC for interrupt routing
[    0.327927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.328903] PCI: Using E820 reservations for host bridge windows
[    0.329949] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.331874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.331908] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.332925] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.333930] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.334937] PCI host bridge to bus 0000:00
[    0.335723] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.335903] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.336903] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.337903] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.338903] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.339903] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.340903] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.341949] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.343345] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.344904] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.346870] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.349903] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.352904] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.354401] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.355776] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.356721] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.359562] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.361142] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.362905] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.366906] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.368705] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.370273] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.370950] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.372421] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.373866] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.374889] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.377391] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.380458] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.382031] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.383419] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.385005] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.386438] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.387903] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.389488] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.390174] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.392340] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.394231] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.395077] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.397597] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.398240] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.399588] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.400903] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.402534] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.402949] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.403945] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.404945] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.405943] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.406943] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.408696] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.408944] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.409921] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.410908] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.411906] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.412908] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.413906] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.414906] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.415906] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.416906] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.418098] iommu: Default domain type: Translated
[    0.418904] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.419949] SCSI subsystem initialized
[    0.420658] ACPI: bus type USB registered
[    0.420911] usbcore: registered new interface driver usbfs
[    0.421907] usbcore: registered new interface driver hub
[    0.422907] usbcore: registered new device driver usb
[    0.423879] pps_core: LinuxPPS API ver. 1 registered
[    0.423903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.424905] PTP clock support registered
[    0.425666] Bluetooth: Core ver 2.22
[    0.426605] NET: Registered PF_BLUETOOTH protocol family
[    0.426903] Bluetooth: HCI device and connection manager initialized
[    0.427904] Bluetooth: HCI socket layer initialized
[    0.428827] Bluetooth: L2CAP socket layer initialized
[    0.428905] Bluetooth: SCO socket layer initialized
[    0.429915] PCI: Using ACPI for IRQ routing
[    0.477916] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.478900] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.478900] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.478906] vgaarb: loaded
[    0.479482] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.479903] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.482955] clocksource: Switched to clocksource kvm-clock
[    0.484090] pnp: PnP ACPI init
[    0.484810] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.486406] pnp: PnP ACPI: found 5 devices
[    0.494207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.496015] NET: Registered PF_INET protocol family
[    0.497013] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.498571] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.500302] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.501845] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.503461] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.504912] TCP: Hash tables configured (established 4096 bind 4096)
[    0.506110] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.507373] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.508777] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.510060] RPC: Registered named UNIX socket transport module.
[    0.511248] RPC: Registered udp transport module.
[    0.512181] RPC: Registered tcp transport module.
[    0.513102] RPC: Registered tcp-with-tls transport module.
[    0.514188] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.515460] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.516727] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.518673] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.519989] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.521343] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.522725] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.524263] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.525678] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.527027] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.528356] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.529716] PCI: CLS 0 bytes, default 64
[    0.530520] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.533476] Initialise system trusted keyrings
[    0.535540] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.538502] NFS: Registering the id_resolver key type
[    0.540713] Key type id_resolver registered
[    0.542497] Key type id_legacy registered
[    0.544722] Key type cifs.idmap registered
[    0.563833] xor: automatically using best checksumming function   avx       
[    0.566868] Key type asymmetric registered
[    0.568642] Asymmetric key parser 'x509' registered
[    0.570759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.573923] io scheduler mq-deadline registered
[    0.575888] io scheduler kyber registered
[    0.578688] io scheduler bfq registered
[    0.580650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.584058] ACPI: button: Power Button [PWRF]
[    0.586580] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.591014] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.595315] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.603282] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.606693] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.609982] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.612788] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.616735] Linux agpgart interface v0.103
[    0.618221] ACPI: bus type drm_connector registered
[    0.620001] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.621858] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.627862] Console: switching to colour dummy device 80x25
[    0.629987] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.629989] [drm] features: -context_init
[    0.634345] [drm] number of scanouts: 1
[    0.635670] [drm] number of cap sets: 0
[    0.637914] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.641326] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.658710] Console: switching to colour frame buffer device 160x50
[    0.684506] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.690534] brd: module loaded
[    0.692939] loop: module loaded
[    0.694510] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.698959] virtio_blk virtio3: [vda] 1162496 512-byte logical blocks (595 MB/568 MiB)
[    0.705084] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.707866] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.710032] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.712972] scsi host0: ahci
[    0.714300] scsi host1: ahci
[    0.715470] scsi host2: ahci
[    0.716663] scsi host3: ahci
[    0.717841] scsi host4: ahci
[    0.718993] scsi host5: ahci
[    0.720025] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.722808] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.725562] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.728327] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.731104] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.735575] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.740225] e100: Intel(R) PRO/100 Network Driver
[    0.741884] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.743737] e1000: Intel(R) PRO/1000 Network Driver
[    0.745005] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.745965] e1000e: Intel(R) PRO/1000 Network Driver
[    0.746794] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.747797] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.748696] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.750111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.751952] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.753270] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.754434] hub 1-0:1.0: USB hub found
[    0.755073] hub 1-0:1.0: 2 ports detected
[    0.756332] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.758898] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.763358] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.772244] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.775260] hub 2-0:1.0: USB hub found
[    0.777233] hub 2-0:1.0: 6 ports detected
[    0.800400] hub 1-0:1.0: USB hub found
[    0.802464] hub 1-0:1.0: 2 ports detected
[    0.804501] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.805542] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.806994] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.808285] hub 3-0:1.0: USB hub found
[    0.808991] hub 3-0:1.0: 2 ports detected
[    0.810256] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.811346] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.812775] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.814036] hub 4-0:1.0: USB hub found
[    0.814774] hub 4-0:1.0: 2 ports detected
[    0.815585] usbcore: registered new interface driver usb-storage
[    0.816740] usbcore: registered new interface driver usbserial_generic
[    0.817950] usbserial: USB Serial support registered for generic
[    0.819131] usbcore: registered new interface driver ftdi_sio
[    0.820267] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.821597] usbcore: registered new interface driver pl2303
[    0.822601] usbserial: USB Serial support registered for pl2303
[    0.823695] i8042: PNP: No PS/2 controller found.
[    0.824651] mousedev: PS/2 mouse device common for all mice
[    0.825864] rtc_cmos 00:03: RTC can wake from S4
[    0.827180] rtc_cmos 00:03: registered as rtc0
[    0.828073] rtc_cmos 00:03: setting system clock to 2025-01-01T11:25:43 UTC (1735730743)
[    0.829638] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.831264] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.831671] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.833112] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.836515] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.837407] sdhci: Secure Digital Host Controller Interface driver
[    0.837408] sdhci: Copyright(c) Pierre Ossman
[    0.837419] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.843921] usbcore: registered new interface driver usbhid
[    0.844940] usbhid: USB HID core driver
[    0.845660] u32 classifier
[    0.846147]     input device check on
[    0.846833]     Actions configured
[    0.847491] NET: Registered PF_INET6 protocol family
[    0.848674] Segment Routing with IPv6
[    0.849346] In-situ OAM (IOAM) with IPv6
[    0.850162] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.851306] NET: Registered PF_PACKET protocol family
[    0.852256] Bridge firewalling registered
[    0.853002] l2tp_core: L2TP core driver, V2.0
[    0.853811] Key type dns_resolver registered
[    0.854711] NET: Registered PF_VSOCK protocol family
[    0.855988] IPI shorthand broadcast: enabled
[    0.857499] sched_clock: Marking stable (725001188, 132158161)->(934100551, -76941202)
[    0.859063] registered taskstats version 1
[    0.859855] Loading compiled-in X.509 certificates
[    0.861385] Key type .fscrypt registered
[    0.862124] Key type fscrypt-provisioning registered
[    0.863205] Btrfs loaded, zoned=no, fsverity=no
[    0.864910] Key type encrypted registered
[    0.865797] printk: legacy console [netcon0] enabled
[    0.866718] netconsole: network logging started
[    1.013204] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.042700] ata4: SATA link down (SStatus 0 SControl 300)
[    1.043923] ata2: SATA link down (SStatus 0 SControl 300)
[    1.045260] ata1: SATA link down (SStatus 0 SControl 300)
[    1.052788] ata5: SATA link down (SStatus 0 SControl 300)
[    1.053810] ata6: SATA link down (SStatus 0 SControl 300)
[    1.055144] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.057970] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.060606] ata3.00: applying bridge limits
[    1.062803] ata3.00: configured for UDMA/100
[    1.065217] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.092428] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.095261] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.118169] IP-Config: Complete:
[    1.118742]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.120418]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.121403]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.121404]      nameserver0=8.8.8.8
[    1.123302] clk: Disabling unused clocks
[    1.124245] md: Waiting for all devices to be available before autodetect
[    1.125223] md: If you don't use raid, use raid=noautodetect
[    1.126027] md: Autodetecting RAID arrays.
[    1.126582] md: autorun ...
[    1.126978] md: ... autorun DONE.
[    1.129836] EXT4-fs (vda): mounted filesystem f2747527-e19e-4914-adcf-4f20fe2bcfd9 r/w with ordered data mode. Quota mode: disabled.
[    1.131555] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.132487] devtmpfs: mounted
[    1.133571] Freeing unused kernel image (initmem) memory: 3480K
[    1.134451] Write protecting the kernel read-only data: 26624k
[    1.135448] Freeing unused kernel image (rodata/data gap) memory: 368K
[    1.136412] Run /sbin/init as init process
INIT: version 3.11 booting
warning: FBIOPUT[    1.162270] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
_VSCREENINFO fai[    1.170370] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
led, double buffering disabled
Starting udev
[    1.199790] udevd[149]: starting version 3.2.14
[    1.203039] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.204489] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.208836] udevd[150]: starting eudev-3.2.14
[    1.285185] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.415782] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.468469] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.528338] EXT4-fs (vda): re-mounted f2747527-e19e-4914-adcf-4f20fe2bcfd9 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...


X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 6.12.3-yocto-standard #1 SMP PREEMPT_DYNAMIC Thu Dec 12 17:25:00 UTC 2024 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan  1 11:25:44 2025
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDlIDqhskRAwDbCvGK6svk3kd3ip7WgqgB4sTTwkJ/31p7DTHZ7PXAC7RGU4qhtFZofD38gH5LRY2g1NJICHPU9cgNSGFw8Hj825Koq6pLOP1QlW6ZdXyrzCaoEzPqhhJMa66g2PAzp8/nLMdPK/Xqj6K/CzyUysZDFJG46KH/CkvGsFlAzflwYJ5X1QsZ/IlQg1E1f7ZfwPtg2Ak2KDyIOoh6JHUbHE+Zl74lyEEq6fnMqArvCFGRo5Mv/StV5Nr5TVT/hQrg45LLeMY/YAlNwLc0BISQik2aiuSgXOqw3NKGWs5/99MrXWRoZf6ac2TmN+RllQS/J8kxJYPTevNGx root@qemux86-64
Fingerprint: SHA256:1TgVX5Mr4NA4vEWtStyID/fE4HjlT7SD1zyqmsI4C6o
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.928450] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.929243] Bluetooth: BNEP filters: protocol multicast
[    1.930003] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-CqvYMGG1Ct,guid=1dc54f0b7e2a46756469222167752638
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[632]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=649 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[632]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xa00003): BadWindow (invalid Window parameter) (opcode: 12)

(connman-applet:613): Gdk-[1;35mCRITICAL[0m **: [34m11:25:44.581[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
