[    0.000000] Linux version 5.15.175-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Jan 2 14:31:52 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr e233001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 351005286 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000004] tsc: Detected 2749.996 MHz processor
[    0.000710] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000753] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002726] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.002795] ACPI: Early table checksum verification disabled
[    0.002796] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.002799] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002803] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002807] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002809] ACPI: FACS 0x000000001FFE0000 000040
[    0.002810] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002812] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002813] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002815] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002817] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341]
[    0.002818] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d]
[    0.002818] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002819] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1]
[    0.002820] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409]
[    0.002820] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445]
[    0.002821] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d]
[    0.002846] Zone ranges:
[    0.002847]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002848]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002849]   Normal   empty
[    0.002850] Movable zone start for each node
[    0.002850] Early memory node ranges
[    0.002851]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002852]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002853] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.002956] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002968] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003573] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.003901] ACPI: PM-Timer IO Port: 0x608
[    0.003907] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.003927] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.003929] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.003931] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.003932] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.003933] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.003934] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.003936] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.003937] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.003938] TSC deadline timer available
[    0.003941] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.003953] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.003954] Booting paravirtualized kernel on KVM
[    0.003956] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.003958] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.004103] percpu: Embedded 54 pages/cpu s182360 r8192 d30632 u524288
[    0.004125] kvm-guest: stealtime: cpu 0, msr 1f41b140
[    0.004127] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.004129] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.004191] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004204] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004357] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.004840] Memory: 482184K/523736K available (16394K kernel code, 2129K rwdata, 3636K rodata, 1904K init, 1948K bss, 41292K reserved, 0K cma-reserved)
[    0.004862] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004870] ftrace: allocating 45632 entries in 179 pages
[    0.022227] ftrace: allocated 179 pages with 5 groups
[    0.022381] rcu: Preemptible hierarchical RCU implementation.
[    0.022382] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.022384] 	All grace periods are expedited (rcu_expedited).
[    0.022384] 	Trampoline variant of Tasks RCU enabled.
[    0.022385] 	Rude variant of Tasks RCU enabled.
[    0.022385] 	Tracing variant of Tasks RCU enabled.
[    0.022386] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.022387] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.025116] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.025321] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.025328] random: crng init done
[    0.029441] Console: colour VGA+ 80x25
[    0.105081] printk: console [ttyS0] enabled
[    0.105598] ACPI: Core revision 20210730
[    0.106172] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.107357] APIC: Switch to symmetric I/O mode setup
[    0.108172] x2apic enabled
[    0.108773] Switched APIC routing to physical x2apic.
[    0.110328] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.111156] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.112575] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996)
[    0.113688] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.114575] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.115317] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.115576] Spectre V2 : Mitigation: Retpolines
[    0.116575] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.117575] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.118575] Speculative Store Bypass: Vulnerable
[    0.119592] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.120575] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.121575] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.122577] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.123375] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.136749] Freeing SMP alternatives memory: 48K
[    0.137350] pid_max: default: 32768 minimum: 301
[    0.137587] LSM: Security Framework initializing
[    0.138579] landlock: Up and running.
[    0.139071] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.139575] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.140848] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.141650] Performance Events: AMD PMU driver.
[    0.142248] ... version:                0
[    0.142577] ... bit width:              48
[    0.143104] ... generic registers:      4
[    0.143577] ... value mask:             0000ffffffffffff
[    0.144249] ... max period:             00007fffffffffff
[    0.144577] ... fixed-purpose events:   0
[    0.145104] ... event mask:             000000000000000f
[    0.145620] signal: max sigframe size: 1776
[    0.146166] rcu: Hierarchical SRCU implementation.
[    0.146703] smp: Bringing up secondary CPUs ...
[    0.147340] x86: Booting SMP configuration:
[    0.147577] .... node  #0, CPUs:      #1
[    0.084306] kvm-clock: cpu 1, msr e233041, secondary cpu clock
[    0.159417] kvm-guest: stealtime: cpu 1, msr 1f49b140
[    0.160628]  #2
[    0.084306] kvm-clock: cpu 2, msr e233081, secondary cpu clock
[    0.172542] kvm-guest: stealtime: cpu 2, msr 1f51b140
[    0.173624]  #3
[    0.084306] kvm-clock: cpu 3, msr e2330c1, secondary cpu clock
[    0.186060] kvm-guest: stealtime: cpu 3, msr 1f59b140
[    0.186580] smp: Brought up 1 node, 4 CPUs
[    0.187581] smpboot: Max logical packages: 1
[    0.188132] smpboot: Total of 4 processors activated (21999.96 BogoMIPS)
[    0.188770] devtmpfs: initialized
[    0.189092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.189580] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.190474] pinctrl core: initialized pinctrl subsystem
[    0.190680] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.191506] thermal_sys: Registered thermal governor 'step_wise'
[    0.191507] thermal_sys: Registered thermal governor 'user_space'
[    0.191687] cpuidle: using governor menu
[    0.192627] ACPI: bus type PCI registered
[    0.193204] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.193578] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.194453] PCI: Using configuration type 1 for base access
[    0.195146] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.213577] raid6: sse2x4   gen() 29648 MB/s
[    0.230580] raid6: sse2x4   xor()  3761 MB/s
[    0.247577] raid6: sse2x2   gen() 27495 MB/s
[    0.264577] raid6: sse2x2   xor() 19043 MB/s
[    0.281577] raid6: sse2x1   gen()  7177 MB/s
[    0.298577] raid6: sse2x1   xor() 16756 MB/s
[    0.299577] raid6: using algorithm sse2x4 gen() 29648 MB/s
[    0.300269] raid6: .... xor() 3761 MB/s, rmw enabled
[    0.300577] raid6: using ssse3x2 recovery algorithm
[    0.301244] ACPI: Added _OSI(Module Device)
[    0.301577] ACPI: Added _OSI(Processor Device)
[    0.302141] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.302577] ACPI: Added _OSI(Processor Aggregator Device)
[    0.303265] ACPI: Added _OSI(Linux-Dell-Video)
[    0.303577] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.304247] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.304980] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.306325] ACPI: Interpreter enabled
[    0.306589] ACPI: PM: (supports S0 S3 S5)
[    0.307103] ACPI: Using IOAPIC for interrupt routing
[    0.307589] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.308618] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.309983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.310580] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.311605] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.312410] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.312601] PCI host bridge to bus 0000:00
[    0.313132] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.313577] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.314448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.314577] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.315522] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.315577] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.316539] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.316620] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.317789] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.319577] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.321109] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.324352] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.325578] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.326906] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.328578] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.331578] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.333286] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.334578] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.338494] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.339504] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.340971] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.341616] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.343057] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.344578] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.346578] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.349543] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.351102] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.352817] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.354075] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.355703] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.356938] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.358813] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.360037] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.360915] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.363034] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.364392] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.364747] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.367183] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.368023] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.369306] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.370812] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.372163] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.372620] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.373423] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.373614] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.374408] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.374614] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.375415] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.375613] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.376594] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.377357] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.377579] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.378345] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.378580] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.379331] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.379580] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.380332] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.380735] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.381354] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.381579] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.382299] vgaarb: loaded
[    0.382613] SCSI subsystem initialized
[    0.383102] ACPI: bus type USB registered
[    0.383585] usbcore: registered new interface driver usbfs
[    0.384580] usbcore: registered new interface driver hub
[    0.385252] usbcore: registered new device driver usb
[    0.385584] pps_core: LinuxPPS API ver. 1 registered
[    0.386204] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.386579] PTP clock support registered
[    0.387082] Bluetooth: Core ver 2.22
[    0.387581] NET: Registered PF_BLUETOOTH protocol family
[    0.388250] Bluetooth: HCI device and connection manager initialized
[    0.388578] Bluetooth: HCI socket layer initialized
[    0.389215] Bluetooth: L2CAP socket layer initialized
[    0.389578] Bluetooth: SCO socket layer initialized
[    0.390205] PCI: Using ACPI for IRQ routing
[    0.435160] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.435577] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.440621] clocksource: Switched to clocksource kvm-clock
[    0.444849] pnp: PnP ACPI init
[    0.445381] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.446445] pnp: PnP ACPI: found 8 devices
[    0.453222] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.454508] NET: Registered PF_INET protocol family
[    0.455202] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.456297] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.457366] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.458357] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.459358] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.460263] TCP: Hash tables configured (established 4096 bind 4096)
[    0.461083] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.461928] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.462867] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.463833] RPC: Registered named UNIX socket transport module.
[    0.465434] RPC: Registered udp transport module.
[    0.466632] RPC: Registered tcp transport module.
[    0.467868] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.469528] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.471747] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.473324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.475078] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.476824] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.478562] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.480659] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.482950] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.485367] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.487778] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.490092] PCI: CLS 0 bytes, default 64
[    0.491425] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.501981] Initialise system trusted keyrings
[    0.503340] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.506491] NFS: Registering the id_resolver key type
[    0.508138] Key type id_resolver registered
[    0.509489] Key type id_legacy registered
[    0.511160] Key type cifs.idmap registered
[    0.517482] xor: automatically using best checksumming function   avx       
[    0.519749] Key type asymmetric registered
[    0.520271] Asymmetric key parser 'x509' registered
[    0.520908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.521850] io scheduler mq-deadline registered
[    0.522438] io scheduler kyber registered
[    0.523130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.525349] ACPI: button: Power Button [PWRF]
[    0.526369] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.527899] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.529273] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.531187] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.532724] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.533915] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.535095] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.536284] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.537878] Linux agpgart interface v0.103
[    0.538576] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.539346] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.548946] Console: switching to colour dummy device 80x25
[    0.549807] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.551123] [drm] number of scanouts: 1
[    0.551646] [drm] number of cap sets: 0
[    0.552548] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.553981] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.568642] Console: switching to colour frame buffer device 128x48
[    0.571928] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.576328] brd: module loaded
[    0.578328] loop: module loaded
[    0.579616] virtio_blk virtio3: [vda] 1248388 512-byte logical blocks (639 MB/610 MiB)
[    0.582233] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.583316] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.584798] scsi host0: ahci
[    0.585396] scsi host1: ahci
[    0.585964] scsi host2: ahci
[    0.586478] scsi host3: ahci
[    0.587041] scsi host4: ahci
[    0.587552] scsi host5: ahci
[    0.587945] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.588886] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.589824] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.590760] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.591731] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.592663] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.594666] e100: Intel(R) PRO/100 Network Driver
[    0.595315] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.596017] e1000: Intel(R) PRO/1000 Network Driver
[    0.596641] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.597379] e1000e: Intel(R) PRO/1000 Network Driver
[    0.598002] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.598760] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.599452] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.600165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.601002] ehci-pci: EHCI PCI platform driver
[    0.602011] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.602688] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.603761] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.611338] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.612207] hub 1-0:1.0: USB hub found
[    0.612709] hub 1-0:1.0: 6 ports detected
[    0.613330] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.614112] ohci-pci: OHCI PCI platform driver
[    0.614682] uhci_hcd: USB Universal Host Controller Interface driver
[    0.615905] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.616591] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.617615] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c100
[    0.618461] hub 2-0:1.0: USB hub found
[    0.618948] hub 2-0:1.0: 2 ports detected
[    0.619932] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.620621] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.621689] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c120
[    0.622692] hub 3-0:1.0: USB hub found
[    0.623184] hub 3-0:1.0: 2 ports detected
[    0.624047] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.624740] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.625768] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c140
[    0.626662] hub 4-0:1.0: USB hub found
[    0.627156] hub 4-0:1.0: 2 ports detected
[    0.627742] usbcore: registered new interface driver usb-storage
[    0.628520] usbcore: registered new interface driver usbserial_generic
[    0.629353] usbserial: USB Serial support registered for generic
[    0.630111] usbcore: registered new interface driver ftdi_sio
[    0.630922] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.631858] usbcore: registered new interface driver pl2303
[    0.632579] usbserial: USB Serial support registered for pl2303
[    0.633391] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.635043] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.635702] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.636429] mousedev: PS/2 mouse device common for all mice
[    0.637278] rtc_cmos 00:06: RTC can wake from S4
[    0.638347] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.639729] rtc_cmos 00:06: registered as rtc0
[    0.640456] rtc_cmos 00:06: setting system clock to 2025-01-07T13:54:56 UTC (1736258096)
[    0.641649] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.643032] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.643865] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.644619] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.645943] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.648025] sdhci: Secure Digital Host Controller Interface driver
[    0.648898] sdhci: Copyright(c) Pierre Ossman
[    0.649511] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.650350] usbcore: registered new interface driver usbhid
[    0.651134] usbhid: USB HID core driver
[    0.651720] u32 classifier
[    0.652123]     input device check on
[    0.652682]     Actions configured
[    0.653264] NET: Registered PF_INET6 protocol family
[    0.654287] Segment Routing with IPv6
[    0.654873] In-situ OAM (IOAM) with IPv6
[    0.655480] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.656461] NET: Registered PF_PACKET protocol family
[    0.657211] Bridge firewalling registered
[    0.657817] Key type dns_resolver registered
[    0.658503] NET: Registered PF_VSOCK protocol family
[    0.659449] IPI shorthand broadcast: enabled
[    0.660088] sched_clock: Marking stable (576116817, 83306806)->(712741998, -53318375)
[    0.661263] Loading compiled-in X.509 certificates
[    0.662068] Key type .fscrypt registered
[    0.662612] Key type fscrypt-provisioning registered
[    0.663424] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.664588] Key type encrypted registered
[    0.665191] printk: console [netcon0] enabled
[    0.665799] netconsole: network logging started
[    0.854319] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.897837] ata2: SATA link down (SStatus 0 SControl 300)
[    0.898658] ata1: SATA link down (SStatus 0 SControl 300)
[    0.899710] ata5: SATA link down (SStatus 0 SControl 300)
[    0.900521] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.901385] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.902101] ata3.00: applying bridge limits
[    0.902702] ata3.00: configured for UDMA/100
[    0.903447] ata4: SATA link down (SStatus 0 SControl 300)
[    0.903472] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.909341] ata6: SATA link down (SStatus 0 SControl 300)
[    0.922479] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.923622] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.990001] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    0.991955] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.269681] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.283321] IP-Config: Complete:
[    1.283902]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.285610]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.286605]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.286607]      nameserver0=8.8.8.8
[    1.288559] clk: Disabling unused clocks
[    1.289495] md: Waiting for all devices to be available before autodetect
[    1.290657] md: If you don't use raid, use raid=noautodetect
[    1.291622] md: Autodetecting RAID arrays.
[    1.292324] md: autorun ...
[    1.292800] md: ... autorun DONE.
[    1.294363] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    1.296002] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.297100] devtmpfs: mounted
[    1.298027] Freeing unused kernel image (initmem) memory: 1904K
[    1.299043] Write protecting the kernel read-only data: 22528k
[    1.300221] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.301410] Freeing unused kernel image (rodata/data gap) memory: 460K
[    1.302529] Run /sbin/init as init process
INIT: version 3.01 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.328567] udevd[167]: starting version 3.2.10
[    1.333758] udevd[168]: starting eudev-3.2.10
[    1.480300] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.15.175-yocto-standard #1 SMP PREEMPT Thu Jan 2 14:31:52 UTC 2025 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan  7 13:54:56 2025
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCeeAi+RIgbnGm9/EvtMnBbUMN/tCPvO+nI+F1oQ/UCzxXmmgkC5d52/nFO3sggiH1EjT4ZfvRpHPncO2Po1yyA7q5+2fnNHbonbLY4S159rEvy6SHN3Wf9KRxphysPw0uHAQ+SlbqG48H1GhDrKeKun/yMqw7VQZdS5FDGM45a6WV2uGBLjV9m3iLeCqpqsbguCpxLNvi75jSqFzVxPoewu4rJWQ6EMnefWtptqKBMCpByk4BKP6ucw8OK9LVCoQUVKibR4iBzTOy5TxQpS94MDRSfyG+ycJQBqLOcpFfO3UDqg3kdvwKnQ+7wdbRvRpe5iJThp5I7xQRhGR9w75PP root@qemux86-64
Fingerprint: sha1!! 0f:04:40:ad:87:29:4c:7a:9c:ab:db:43:a9:01:29:a2:41:1d:bb:7b
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.740393] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.741187] Bluetooth: BNEP filters: protocol multicast
[    1.741872] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-k80liG6G1b,guid=5d86624cd271b807b65e32f0677d3231
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop


Poky (Yocto Project Reference Distro) 4.0.23 qemux86-64 /dev/ttyS0

qemux86-64 login: libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: libGL error: failed to load driver: virtio_gpu
failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[661]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=659 comm="matchbox-desktop")
dbus-daemon[661]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xe00003): BadWindow (invalid Window parameter) (opcode: 12)

(connman-applet:629): Gdk-[1;35mCRITICAL[0m **: [34m13:54:57.268[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
