[    0.000000] Linux version 6.12.9-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Fri Jan 10 17:45:39 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 341053837 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000936] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000968] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000970] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002858] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.003005] ACPI: Early table checksum verification disabled
[    0.003006] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.003012] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003016] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003019] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003021] ACPI: FACS 0x000000001FFE0000 000040
[    0.003022] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003024] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003025] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003027] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003028] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.003029] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.003029] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.003030] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.003030] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.003031] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.003031] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.003058] Zone ranges:
[    0.003059]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003060]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003061]   Normal   empty
[    0.003061] Movable zone start for each node
[    0.003062] Early memory node ranges
[    0.003062]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003063]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003064] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003178] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003198] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004162] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004507] ACPI: PM-Timer IO Port: 0x608
[    0.004513] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004536] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004538] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004539] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004540] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004541] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004542] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004544] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004544] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004546] TSC deadline timer available
[    0.004549] CPU topo: Max. logical packages:   1
[    0.004550] CPU topo: Max. logical dies:       1
[    0.004550] CPU topo: Max. dies per package:   1
[    0.004553] CPU topo: Max. threads per core:   1
[    0.004554] CPU topo: Num. cores per package:     4
[    0.004554] CPU topo: Num. threads per package:   4
[    0.004554] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004563] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004574] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004575] Booting paravirtualized kernel on KVM
[    0.004576] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004579] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004757] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004777] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004822] random: crng init done
[    0.004839] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004850] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004874] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005043] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005472] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005485] ftrace: allocating 53681 entries in 210 pages
[    0.014480] ftrace: allocated 210 pages with 4 groups
[    0.014508] Dynamic Preempt: full
[    0.014633] rcu: Preemptible hierarchical RCU implementation.
[    0.014634] rcu: 	RCU event tracing is enabled.
[    0.014634] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014636] 	All grace periods are expedited (rcu_expedited).
[    0.014636] 	Trampoline variant of Tasks RCU enabled.
[    0.014637] 	Rude variant of Tasks RCU enabled.
[    0.014637] 	Tracing variant of Tasks RCU enabled.
[    0.014638] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014638] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014642] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014643] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014644] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019336] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019524] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019586] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024539] Console: colour VGA+ 80x25
[    0.024574] printk: legacy console [ttyS0] enabled
[    0.136129] ACPI: Core revision 20240827
[    0.136870] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.138338] APIC: Switch to symmetric I/O mode setup
[    0.139287] x2apic enabled
[    0.139996] APIC: Switched APIC routing to: physical x2apic
[    0.141867] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.142816] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.144398] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.145528] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.146398] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.147400] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.148400] Spectre V2 : Mitigation: Retpolines
[    0.149398] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.150398] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.151398] Speculative Store Bypass: Vulnerable
[    0.152410] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.153399] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.154400] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.155400] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.156398] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.175092] Freeing SMP alternatives memory: 56K
[    0.175401] pid_max: default: 32768 minimum: 301
[    0.176411] LSM: initializing lsm=capability,landlock
[    0.177195] landlock: Up and running.
[    0.177415] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.178399] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.179557] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.180502] Performance Events: AMD PMU driver.
[    0.181212] ... version:                0
[    0.181401] ... bit width:              48
[    0.182028] ... generic registers:      4
[    0.182401] ... value mask:             0000ffffffffffff
[    0.183206] ... max period:             00007fffffffffff
[    0.183401] ... fixed-purpose events:   0
[    0.184009] ... event mask:             000000000000000f
[    0.184453] signal: max sigframe size: 1776
[    0.185119] rcu: Hierarchical SRCU implementation.
[    0.185401] rcu: 	Max phase no-delay instances is 400.
[    0.186209] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.186500] smp: Bringing up secondary CPUs ...
[    0.187253] smpboot: x86: Booting SMP configuration:
[    0.187403] .... node  #0, CPUs:      #1 #2 #3
[    0.221419] smp: Brought up 1 node, 4 CPUs
[    0.222401] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.223625] Memory: 471760K/523736K available (20480K kernel code, 2433K rwdata, 5784K rodata, 3480K init, 2084K bss, 47760K reserved, 0K cma-reserved)
[    0.224443] devtmpfs: initialized
[    0.225137] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.225402] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.226420] pinctrl core: initialized pinctrl subsystem
[    0.227505] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.228479] thermal_sys: Registered thermal governor 'step_wise'
[    0.228480] thermal_sys: Registered thermal governor 'user_space'
[    0.229408] cpuidle: using governor menu
[    0.230524] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.231402] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.232413] PCI: Using configuration type 1 for base access
[    0.233298] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.250400] raid6: sse2x4   gen() 29301 MB/s
[    0.267401] raid6: sse2x2   gen() 27326 MB/s
[    0.284408] raid6: sse2x1   gen()  7045 MB/s
[    0.285081] raid6: using algorithm sse2x4 gen() 29301 MB/s
[    0.302402] raid6: .... xor() 3210 MB/s, rmw enabled
[    0.303401] raid6: using ssse3x2 recovery algorithm
[    0.304203] ACPI: Added _OSI(Module Device)
[    0.304401] ACPI: Added _OSI(Processor Device)
[    0.305067] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.305401] ACPI: Added _OSI(Processor Aggregator Device)
[    0.306650] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.308403] ACPI: Interpreter enabled
[    0.309012] ACPI: PM: (supports S0 S3 S5)
[    0.309405] ACPI: Using IOAPIC for interrupt routing
[    0.310185] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.310401] PCI: Using E820 reservations for host bridge windows
[    0.311374] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.312350] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.312405] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.313424] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.314405] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.315437] PCI host bridge to bus 0000:00
[    0.316068] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.316402] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.317402] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.318401] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.319402] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.320401] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.321401] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.322294] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.322822] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.324402] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.326402] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.329935] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.331309] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.331914] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.333340] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.334340] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.337868] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.339814] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.341403] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.343406] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.346764] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.348740] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.349445] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.350894] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.352359] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.353319] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.355401] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.357705] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.360704] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.363241] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.364510] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.365998] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.367865] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.368962] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.369668] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.371714] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.372751] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.373580] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.376401] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.377868] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.379015] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.380500] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.381902] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.382447] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.383401] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.384348] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.384443] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.385441] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.386414] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.387371] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.387418] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.388328] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.388404] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.389317] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.389421] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.390333] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.390404] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.391320] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.391582] iommu: Default domain type: Translated
[    0.392328] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.392449] SCSI subsystem initialized
[    0.393034] ACPI: bus type USB registered
[    0.393408] usbcore: registered new interface driver usbfs
[    0.394256] usbcore: registered new interface driver hub
[    0.394403] usbcore: registered new device driver usb
[    0.395177] pps_core: LinuxPPS API ver. 1 registered
[    0.395400] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.396402] PTP clock support registered
[    0.397018] Bluetooth: Core ver 2.22
[    0.397405] NET: Registered PF_BLUETOOTH protocol family
[    0.398216] Bluetooth: HCI device and connection manager initialized
[    0.398401] Bluetooth: HCI socket layer initialized
[    0.399141] Bluetooth: L2CAP socket layer initialized
[    0.399402] Bluetooth: SCO socket layer initialized
[    0.400148] PCI: Using ACPI for IRQ routing
[    0.447355] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.447355] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.447398] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.447404] vgaarb: loaded
[    0.447846] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.448401] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.451444] clocksource: Switched to clocksource kvm-clock
[    0.452378] pnp: PnP ACPI init
[    0.452968] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.454234] pnp: PnP ACPI: found 5 devices
[    0.461682] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.463084] NET: Registered PF_INET protocol family
[    0.463979] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.465229] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.466532] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.467730] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.468915] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.470027] TCP: Hash tables configured (established 4096 bind 4096)
[    0.471035] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.472047] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.473143] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.474169] RPC: Registered named UNIX socket transport module.
[    0.475077] RPC: Registered udp transport module.
[    0.475792] RPC: Registered tcp transport module.
[    0.476497] RPC: Registered tcp-with-tls transport module.
[    0.477327] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.478309] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.479248] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.480189] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.481230] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.482273] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.483309] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.484509] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.485729] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.486890] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.488023] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.489260] PCI: CLS 0 bytes, default 64
[    0.490329] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.493334] Initialise system trusted keyrings
[    0.494146] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.495255] NFS: Registering the id_resolver key type
[    0.496037] Key type id_resolver registered
[    0.496666] Key type id_legacy registered
[    0.497645] Key type cifs.idmap registered
[    0.505202] xor: automatically using best checksumming function   avx       
[    0.506322] Key type asymmetric registered
[    0.506970] Asymmetric key parser 'x509' registered
[    0.507729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.508860] io scheduler mq-deadline registered
[    0.509559] io scheduler kyber registered
[    0.510206] io scheduler bfq registered
[    0.511013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.512935] ACPI: button: Power Button [PWRF]
[    0.515621] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.520756] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.525080] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.532985] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.537741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.540542] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.543784] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.548476] Linux agpgart interface v0.103
[    0.551012] ACPI: bus type drm_connector registered
[    0.553156] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.555538] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.563332] Console: switching to colour dummy device 80x25
[    0.565464] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.565466] [drm] features: -context_init
[    0.569645] [drm] number of scanouts: 1
[    0.570886] [drm] number of cap sets: 0
[    0.572417] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.575917] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.600791] Console: switching to colour frame buffer device 160x50
[    0.624075] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.626513] brd: module loaded
[    0.627639] loop: module loaded
[    0.628258] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.630041] virtio_blk virtio3: [vda] 881536 512-byte logical blocks (451 MB/430 MiB)
[    0.632671] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.633989] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.634974] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.636433] scsi host0: ahci
[    0.637063] scsi host1: ahci
[    0.637633] scsi host2: ahci
[    0.638215] scsi host3: ahci
[    0.638775] scsi host4: ahci
[    0.639339] scsi host5: ahci
[    0.639810] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.641063] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.642314] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.643559] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.644810] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.646059] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.648416] e100: Intel(R) PRO/100 Network Driver
[    0.649232] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.650132] e1000: Intel(R) PRO/1000 Network Driver
[    0.650881] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.651752] e1000e: Intel(R) PRO/1000 Network Driver
[    0.652503] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.653407] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.654236] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.655674] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.656667] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.657892] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.658927] hub 1-0:1.0: USB hub found
[    0.659494] hub 1-0:1.0: 2 ports detected
[    0.660366] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.661454] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.662713] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.668890] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.669894] hub 2-0:1.0: USB hub found
[    0.670466] hub 2-0:1.0: 6 ports detected
[    0.692021] hub 1-0:1.0: USB hub found
[    0.692610] hub 1-0:1.0: 2 ports detected
[    0.693335] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.695416] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.698489] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.701014] hub 3-0:1.0: USB hub found
[    0.702515] hub 3-0:1.0: 2 ports detected
[    0.704918] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.706999] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.710364] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.712844] hub 4-0:1.0: USB hub found
[    0.714353] hub 4-0:1.0: 2 ports detected
[    0.716141] usbcore: registered new interface driver usb-storage
[    0.718512] usbcore: registered new interface driver usbserial_generic
[    0.721198] usbserial: USB Serial support registered for generic
[    0.723539] usbcore: registered new interface driver ftdi_sio
[    0.725786] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.728611] usbcore: registered new interface driver pl2303
[    0.730792] usbserial: USB Serial support registered for pl2303
[    0.733099] i8042: PNP: No PS/2 controller found.
[    0.735045] mousedev: PS/2 mouse device common for all mice
[    0.737340] rtc_cmos 00:03: RTC can wake from S4
[    0.740145] rtc_cmos 00:03: registered as rtc0
[    0.744151] rtc_cmos 00:03: setting system clock to 2025-01-16T11:51:40 UTC (1737028300)
[    0.747438] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.750623] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.750991] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.754307] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.756581] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.758999] sdhci: Secure Digital Host Controller Interface driver
[    0.763828] sdhci: Copyright(c) Pierre Ossman
[    0.765211] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.767069] usbcore: registered new interface driver usbhid
[    0.768804] usbhid: USB HID core driver
[    0.770045] u32 classifier
[    0.770919]     input device check on
[    0.772148]     Actions configured
[    0.773312] NET: Registered PF_INET6 protocol family
[    0.775187] Segment Routing with IPv6
[    0.776395] In-situ OAM (IOAM) with IPv6
[    0.777670] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.779658] NET: Registered PF_PACKET protocol family
[    0.781258] Bridge firewalling registered
[    0.782203] l2tp_core: L2TP core driver, V2.0
[    0.782972] Key type dns_resolver registered
[    0.784403] NET: Registered PF_VSOCK protocol family
[    0.785939] IPI shorthand broadcast: enabled
[    0.787386] sched_clock: Marking stable (666001848, 120868431)->(851505930, -64635651)
[    0.788832] registered taskstats version 1
[    0.789562] Loading compiled-in X.509 certificates
[    0.791087] Key type .fscrypt registered
[    0.791774] Key type fscrypt-provisioning registered
[    0.792805] Btrfs loaded, zoned=no, fsverity=no
[    0.794347] Key type encrypted registered
[    0.796152] printk: legacy console [netcon0] enabled
[    0.798190] netconsole: network logging started
[    0.907910] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.953751] ata5: SATA link down (SStatus 0 SControl 300)
[    0.955104] ata4: SATA link down (SStatus 0 SControl 300)
[    0.956285] ata2: SATA link down (SStatus 0 SControl 300)
[    0.958629] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.959861] ata1: SATA link down (SStatus 0 SControl 300)
[    0.962054] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.962931] ata3.00: applying bridge limits
[    0.963686] ata6: SATA link down (SStatus 0 SControl 300)
[    0.964676] ata3.00: configured for UDMA/100
[    0.965663] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.984067] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.985112] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.002883] IP-Config: Complete:
[    1.003444]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.005574]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.006907]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.006908]      nameserver0=8.8.8.8
[    1.009238] clk: Disabling unused clocks
[    1.010291] md: Waiting for all devices to be available before autodetect
[    1.011147] md: If you don't use raid, use raid=noautodetect
[    1.011848] md: Autodetecting RAID arrays.
[    1.012449] md: autorun ...
[    1.012901] md: ... autorun DONE.
[    1.018302] EXT4-fs (vda): mounted filesystem 464513ad-a227-494f-ac76-56d0dfec3d05 r/w with ordered data mode. Quota mode: disabled.
[    1.019798] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.020586] devtmpfs: mounted
[    1.021630] Freeing unused kernel image (initmem) memory: 3480K
[    1.022377] Write protecting the kernel read-only data: 26624k
[    1.023269] Freeing unused kernel image (rodata/data gap) memory: 360K
[    1.024111] Run /sbin/init as init process
INIT: version 3.13 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.045644] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.047185] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.063988] udevd[149]: starting version 3.2.14
[    1.067302] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.068592] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.070545] udevd[150]: starting eudev-3.2.14
[    1.160895] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.292202] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.344140] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.405376] EXT4-fs (vda): re-mounted 464513ad-a227-494f-ac76-56d0dfec3d05 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 6.12.9-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Jan 10 17:45:39 UTC 2025 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 16 11:51:41 2025
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
D-BUS per-session daemon address is: unix:path=/tmp/dbus-QICzuc4RyK,guid=2d0fb5d715dc5bf425c9de526788f2cd
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[584]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=593 comm="matchbox-desktop")
dbus-daemon[584]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCdSGbzbXm2TsIC6WtVUhxpEUsQ/LUe3ApTZ771wB/woU2RrR5l18utUyNxdipJV7rBPmc1mDdX3t8RM8/dVRYZpy4a5MHFprWaMPvRl2p5chE2JI0KEMkJGl1qvLSbFXd4L0vnHJR1klZ+HZU3wBO8gZfB17C1DuVMMlNBbST5Ck4O9jSK6UHRI5Xq5kzqfZ4ITsgyyu4yaW6kz2KVFLtq08yJamwGcU4mnlqrY1GqCySgtsjuS43LYqYeOK7BatpOauLhzkZyCYugEwN3WkAIP3MIe9UHA6u+/9S9gxekACWwTX1hGj0bBW6/QCtvOA3s5A0HRVqhMHGBLRe7qLhL root@qemux86-64
Fingerprint: SHA256:kShposAiv2xMgmvvzkcE8S67xM3wzkMFSSec55ZGyA4
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.174314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.176087] Bluetooth: BNEP filters: protocol multicast
[    2.177964] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 