[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 PREEMPT Mon Oct 14 13:27:18 UTC 2024
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Kernel command line: root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 240580K/262144K available (11053K kernel code, 1481K rwdata, 3008K rodata, 480K init, 358K bss, 21564K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 43794 entries in 129 pages
[    0.000000] ftrace: allocated 129 pages with 2 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000237] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000847] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.006573] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.015642] Console: colour dummy device 80x30
[    0.017662] Calibrating delay loop... 881.45 BogoMIPS (lpj=4407296)
[    0.049112] CPU: Testing write buffer coherency: ok
[    0.050974] pid_max: default: 32768 minimum: 301
[    0.052487] LSM: initializing lsm=capability,landlock
[    0.053133] landlock: Up and running.
[    0.056009] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.056071] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.110607] Setting up static identity map for 0x8400 - 0x8458
[    0.112377] rcu: Hierarchical SRCU implementation.
[    0.112471] rcu: 	Max phase no-delay instances is 1000.
[    0.130647] devtmpfs: initialized
[    0.144811] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.146148] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.146281] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.157044] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.161920] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.179506] platform bridge: Fixed dependency cycle(s) with /vga
[    0.180712] platform vga: Fixed dependency cycle(s) with /bridge
[    0.199367] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.199863] amba 10120000.display: Fixed dependency cycle(s) with /bridge
[    0.200142] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.206493] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.206891] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.215720] Serial: AMBA PL011 UART driver
[    0.227041] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.229739] printk: legacy console [ttyAMA0] enabled
[    0.282956] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.286296] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.289210] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.291256] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.297099] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.668932] raid6: int32x8  gen()    72 MB/s
[    1.008831] raid6: int32x4  gen()   129 MB/s
[    1.348836] raid6: int32x2  gen()   169 MB/s
[    1.688889] raid6: int32x1  gen()   260 MB/s
[    1.689579] raid6: using algorithm int32x1 gen() 260 MB/s
[    2.028982] raid6: .... xor() 175 MB/s, rmw enabled
[    2.029807] raid6: using intx1 recovery algorithm
[    2.034631] SCSI subsystem initialized
[    2.036720] usbcore: registered new interface driver usbfs
[    2.037595] usbcore: registered new interface driver hub
[    2.038435] usbcore: registered new device driver usb
[    2.054356] pps_core: LinuxPPS API ver. 1 registered
[    2.055094] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.056079] PTP clock support registered
[    2.071654] Advanced Linux Sound Architecture Driver Initialized.
[    2.111791] vgaarb: loaded
[    2.118300] clocksource: Switched to clocksource arm,sp804
[    2.543252] NET: Registered PF_INET protocol family
[    2.545373] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.555003] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    2.555923] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.556647] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.557376] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    2.558495] TCP: Hash tables configured (established 2048 bind 2048)
[    2.560696] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    2.561465] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    2.563973] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.569057] RPC: Registered named UNIX socket transport module.
[    2.569870] RPC: Registered udp transport module.
[    2.570294] RPC: Registered tcp transport module.
[    2.570726] RPC: Registered tcp-with-tls transport module.
[    2.571260] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.572000] PCI: CLS 0 bytes, default 32
[    2.579971] NetWinder Floating Point Emulator V0.97 (double precision)
[    2.586817] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.593640] NFS: Registering the id_resolver key type
[    2.595676] Key type id_resolver registered
[    2.596108] Key type id_legacy registered
[    2.602429] Key type cifs.idmap registered
[    2.849679] xor: measuring software checksum speed
[    2.853657]    arm4regs        :  1068 MB/sec
[    2.856606]    8regs           :  1374 MB/sec
[    2.859978]    32regs          :  1157 MB/sec
[    2.860598] xor: using function: 8regs (1374 MB/sec)
[    2.861925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.862923] io scheduler mq-deadline registered
[    2.863569] io scheduler kyber registered
[    2.864457] io scheduler bfq registered
[    2.873965] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    2.877305] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    2.879874] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    2.881695] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    2.883278] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    2.884585] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    2.886110] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    2.887109] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    2.890172] versatile-pci 10001000.pci: PCI core found (slot 11)
[    2.893225] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    2.894173] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.895037] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.895689] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    2.896332] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    2.899658] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    2.901384] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    2.901986] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    2.902521] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    2.906991] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    2.907943] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    2.909008] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.909744] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    2.911094] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.911841] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    2.912181] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.913235] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    2.914163] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.915344] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.916213] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.917716] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    2.918965] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    2.919600] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.922347] PCI: bus0: Fast back to back transfers disabled
[    2.924546] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    2.925549] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    2.926484] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    2.927288] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    2.928021] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    2.929145] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    2.929935] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    2.930618] pci 0000:00:0c.0: BAR 1 [mem 0x50006000-0x500063ff]: assigned
[    2.931295] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    2.931918] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    2.932511] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    2.933096] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    2.935486] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    2.940293] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    2.944512] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    2.946571] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    2.949739] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    2.953491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.974836] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    2.976264] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.976305] [drm] features: -context_init
[    2.977775] [drm] number of scanouts: 1
[    2.979813] random: crng init done
[    2.980504] [drm] number of cap sets: 0
[    2.997058] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0
[    3.116878] Console: switching to colour frame buffer device 160x50
[    3.137778] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    3.156844] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    3.160925] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    3.221059] brd: module loaded
[    3.222125] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    3.227554] virtio_blk virtio3: [vda] 973184 512-byte logical blocks (498 MB/475 MiB)
[    3.247278] physmap-flash 34000000.flash: versatile/realview flash protection
[    3.264801] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    3.268908] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    3.270590] Intel/Sharp Extended Query Table at 0x0031
[    3.272193] Using buffer write method
[    3.313830] smc91x: not found (-19).
[    3.314966] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    3.315746] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    3.350622] rtc-ds1307 0-0068: registered as rtc0
[    3.360312] rtc-ds1307 0-0068: setting system clock to 2025-01-23T17:59:51 UTC (1737655191)
[    3.366957] rtc-pl031 101e8000.rtc: registered as rtc1
[    3.368902] i2c_dev: i2c /dev entries driver
[    3.370733] versatile reboot driver registered
[    3.373699] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    3.383952] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    3.390409] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    3.395911] leds-syscon 10000008.0.led: registered LED (null)
[    3.398028] leds-syscon 10000008.1.led: registered LED (null)
[    3.401085] leds-syscon 10000008.2.led: registered LED (null)
[    3.402428] leds-syscon 10000008.3.led: registered LED (null)
[    3.403443] leds-syscon 10000008.4.led: registered LED (null)
[    3.404519] leds-syscon 10000008.5.led: registered LED (null)
[    3.406527] leds-syscon 10000008.6.led: registered LED (null)
[    3.407619] leds-syscon 10000008.7.led: registered LED (null)
[    3.409811] ledtrig-cpu: registered to indicate activity on CPUs
[    3.413038] usbcore: registered new interface driver usbhid
[    3.413611] usbhid: USB HID core driver
[    3.442237] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    3.466364] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    3.467220] aaci-pl041 10004000.aaci: FIFO 512 entries
[    3.470577] u32 classifier
[    3.470917]     input device check on
[    3.471243]     Actions configured
[    3.474184] NET: Registered PF_INET6 protocol family
[    3.485644] Segment Routing with IPv6
[    3.486373] In-situ OAM (IOAM) with IPv6
[    3.487649] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.497331] NET: Registered PF_PACKET protocol family
[    3.500174] Bridge firewalling registered
[    3.501676] l2tp_core: L2TP core driver, V2.0
[    3.502246] Key type dns_resolver registered
[    3.503585] NET: Registered PF_VSOCK protocol family
[    3.552349] registered taskstats version 1
[    3.600924] Key type .fscrypt registered
[    3.601523] Key type fscrypt-provisioning registered
[    3.611197] Btrfs loaded, zoned=no, fsverity=no
[    3.625053] Key type encrypted registered
[    3.631879] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    3.635593] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    3.637859] printk: legacy console [netcon0] enabled
[    3.639764] netconsole: network logging started
[    4.084788] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    4.090458] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    4.159128] IP-Config: Complete:
[    4.159783]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    4.161300]      host=192.168.7.2, domain=, nis-domain=(none)
[    4.162052]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.162138]      nameserver0=8.8.8.8
[    4.182407] clk: Disabling unused clocks
[    4.183710] ALSA device list:
[    4.184208]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    4.195494] md: Waiting for all devices to be available before autodetect
[    4.196502] md: If you don't use raid, use raid=noautodetect
[    4.197267] md: Autodetecting RAID arrays.
[    4.197836] md: autorun ...
[    4.199135] md: ... autorun DONE.
[    4.319761] EXT4-fs (vda): mounted filesystem 14cd0eb1-2ca1-48b8-adea-b58c88162db3 r/w with ordered data mode. Quota mode: disabled.
[    4.321857] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.325717] devtmpfs: mounted
[    4.395485] Freeing unused kernel image (initmem) memory: 480K
[    4.396328] Kernel memory protection not selected by kernel config.
[    4.397580] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    7.281742] udevd[109]: starting version 3.2.14
[    7.536806] udevd[110]: starting eudev-3.2.14
[   14.581601] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   14.583755] amba 10100000.smc: deferred probe pending: (reason unknown)
[   14.584535] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   14.585216] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   14.585911] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   14.586627] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   14.587297] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   14.587987] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   14.647480] amba 10120000.display: deferred probe pending: (reason unknown)
[   19.591210] EXT4-fs (vda): re-mounted 14cd0eb1-2ca1-48b8-adea-b58c88162db3 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.10.14-yocto-standard #1 PREEMPT Mon Oct 14 13:27:18 UTC 2024 armv5tejl
Kernel command line: root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 23 18:00:21 2025
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1.2 qemuarmv5 /dev/ttyAMA0

qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-kTqdiyIByd,guid=edf5243c954a8db346a6a15f58bd4900
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[557]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=537 comm="connman-applet")
dbus-daemon[557]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)

(matchbox-desktop:574): Gtk-[1;33mWARNING[0m **: [34m18:02:41.518[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:574): [1;33mWARNING[0m **: [34m18:02:41.565[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
