52 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.029744] Console: colour dummy device 80x30
[    0.053672] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.053952] CPU: Testing write buffer coherency: ok
[    0.055863] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.056090] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.056225] pid_max: default: 32768 minimum: 301
[    0.058194] LSM: initializing lsm=capability,landlock
[    0.058957] landlock: Up and running.
[    0.062852] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.062921] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.111845] /cpus/cpu@0 missing clock-frequency property
[    0.112305] /cpus/cpu@1 missing clock-frequency property
[    0.112365] /cpus/cpu@2 missing clock-frequency property
[    0.112422] /cpus/cpu@3 missing clock-frequency property
[    0.112612] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.164244] Setting up static identity map for 0x40200000 - 0x40200060
[    0.166085] rcu: Hierarchical SRCU implementation.
[    0.166140] rcu: 	Max phase no-delay instances is 1000.
[    0.183413] smp: Bringing up secondary CPUs ...
[    0.221786] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.221919] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.263280] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.263390] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.284451] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.284555] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.285585] smp: Brought up 1 node, 4 CPUs
[    0.285725] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.285813] CPU: All CPU(s) started in SVC mode.
[    0.322261] Memory: 751236K/786432K available (12288K kernel code, 1505K rwdata, 2952K rodata, 2048K init, 393K bss, 31604K reserved, 0K cma-reserved, 0K highmem)
[    0.435044] devtmpfs: initialized
[    0.449446] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.470912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.472886] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.510303] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.514711] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.522208] cpuidle: using governor ladder
[    0.524948] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.525056] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.530658] Serial: AMBA PL011 UART driver
[    0.696961] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.699355] printk: legacy console [ttyAMA0] enabled
[    0.751017] 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.757413] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.782498] cryptd: max_cpu_qlen set to 1000
[    0.961948] raid6: neonx8   gen()   478 MB/s
[    1.134790] raid6: neonx4   gen()  1202 MB/s
[    1.309235] raid6: neonx2   gen()  1081 MB/s
[    1.482914] raid6: neonx1   gen()   625 MB/s
[    1.657358] raid6: int32x8  gen()   119 MB/s
[    1.834121] raid6: int32x4  gen()   111 MB/s
[    2.007713] raid6: int32x2  gen()   306 MB/s
[    2.181449] raid6: int32x1  gen()   223 MB/s
[    2.182126] raid6: using algorithm neonx4 gen() 1202 MB/s
[    2.371203] raid6: .... xor() 922 MB/s, rmw enabled
[    2.371765] raid6: using neon recovery algorithm
[    2.376928] SCSI subsystem initialized
[    2.377744] usbcore: registered new interface driver usbfs
[    2.378271] usbcore: registered new interface driver hub
[    2.378685] usbcore: registered new device driver usb
[    2.379131] pps_core: LinuxPPS API ver. 1 registered
[    2.379271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.379554] PTP clock support registered
[    2.392776] vgaarb: loaded
[    2.398085] clocksource: Switched to clocksource arch_sys_counter
[    2.463865] NET: Registered PF_INET protocol family
[    2.466067] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.477949] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.478853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.479608] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    2.480654] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.481570] TCP: Hash tables configured (established 8192 bind 8192)
[    2.483353] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.484230] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.486541] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.492282] RPC: Registered named UNIX socket transport module.
[    2.492621] RPC: Registered udp transport module.
[    2.492848] RPC: Registered tcp transport module.
[    2.493059] RPC: Registered tcp-with-tls transport module.
[    2.493288] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.493698] PCI: CLS 0 bytes, default 64
[    2.503103] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.507636] NFS: Registering the id_resolver key type
[    2.508877] Key type id_resolver registered
[    2.509028] Key type id_legacy registered
[    2.515278] Key type cifs.idmap registered
[    2.675152] xor: measuring software checksum speed
[    2.678139]    arm4regs        :  1328 MB/sec
[    2.680367]    8regs           :  1759 MB/sec
[    2.682702]    32regs          :  1607 MB/sec
[    2.685197]    neon            :  1490 MB/sec
[    2.685503] xor: using function: 8regs (1759 MB/sec)
[    2.685865] async_tx: api initialized (async)
[    2.686629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.687495] io scheduler mq-deadline registered
[    2.687976] io scheduler kyber registered
[    2.691871] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.692971] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.695748] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.697042] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.699888] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.700692] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.701186] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.701488] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.703100] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[    2.706846] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.707624] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]
[    2.711221] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.711432] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.712350] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[    2.712620] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.713006] pci 0000:00:02.0: enabling Extended Tags
[    2.713572] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.713813] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.713987] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.715800] PCI: bus0: Fast back to back transfers disabled
[    2.717684] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned
[    2.718135] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned
[    2.718394] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned
[    2.718625] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned
[    2.718803] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned
[    2.718978] pci 0000:00:01.0: BAR 0 [io  0x1000-0x101f]: assigned
[    2.719332] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.719483] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]
[    2.720515] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.727610] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.730858] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.898477] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.899988] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.900028] [drm] features: -context_init
[    2.901710] printk: legacy console [hvc0] enabled
[    2.903092] [drm] number of scanouts: 1
[    2.923072] [drm] number of cap sets: 0
[    2.939074] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    3.117631] Console: switching to colour frame buffer device 160x50
[    3.169278] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    3.381970] brd: module loaded
[    3.383636] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    3.392139] virtio_blk virtio1: [vda] 4899372 512-byte logical blocks (2.51 GB/2.34 GiB)
[    3.444808] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.446300] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    3.453117] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    3.460507] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.462016] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.463413] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    3.650570] hub 1-0:1.0: USB hub found
[    3.659655] hub 1-0:1.0: 4 ports detected
[    3.667163] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.703234] hub 2-0:1.0: USB hub found
[    3.709619] hub 2-0:1.0: 4 ports detected
[    3.727221] rtc-pl031 9010000.pl031: registered as rtc0
[    3.730621] rtc-pl031 9010000.pl031: setting system clock to 2025-01-30T02:33:40 UTC (1738204420)
[    3.738407] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    3.745356] usbcore: registered new interface driver usbhid
[    3.753671] usbhid: USB HID core driver
[    3.756363] u32 classifier
[    3.757084]     input device check on
[    3.758472]     Actions configured
[    3.762950] NET: Registered PF_INET6 protocol family
[    3.786299] Segment Routing with IPv6
[    3.788879] In-situ OAM (IOAM) with IPv6
[    3.791054] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.796899] NET: Registered PF_PACKET protocol family
[    3.803065] Bridge firewalling registered
[    3.805424] l2tp_core: L2TP core driver, V2.0
[    3.806593] Key type dns_resolver registered
[    3.816999] NET: Registered PF_VSOCK protocol family
[    3.820629] Registering SWP/SWPB emulation handler
[    3.876684] registered taskstats version 1
[    3.951593] Key type .fscrypt registered
[    3.952480] Key type fscrypt-provisioning registered
[    3.968954] Btrfs loaded, zoned=no, fsverity=no
[    3.969152] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.400358] hrtimer: interrupt took 47244816 ns
[    4.425214] Key type encrypted registered
[    4.429898] printk: legacy console [netcon0] enabled
[    4.440760] netconsole: network logging started
[    4.539537] IP-Config: Complete:
[    4.551073]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    4.552893]      host=192.168.7.10, domain=, nis-domain=(none)
[    4.560731]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.567547]      nameserver0=8.8.8.8
[    4.571416] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    4.594217] 
[    4.602425] clk: Disabling unused clocks
[    4.629270] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    4.642447] md: Waiting for all devices to be available before autodetect
[    4.649493] md: If you don't use raid, use raid=noautodetect
[    4.650620] md: Autodetecting RAID arrays.
[    4.651856] md: autorun ...
[    4.652418] md: ... autorun DONE.
[    4.767606] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    4.891229] EXT4-fs (vda): mounted filesystem bee6ebd4-655d-49cc-b7e5-c5bf9cb4c274 r/w with ordered data mode. Quota mode: disabled.
[    4.894801] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.899661] devtmpfs: mounted
[    5.024563] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    5.090660] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
[    5.138772] Freeing unused kernel image (initmem) memory: 2048K
[    5.265637] Run /sbin/init as init process
INIT: version 3.13 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    8.406550] udevd[141]: starting version 3.2.14
[    8.832242] udevd[141]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    8.835223] udevd[141]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    9.704857] udevd[142]: starting eudev-3.2.14
[   10.312657] udevd[142]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[   10.315388] udevd[142]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[   15.600301] EXT4-fs (vda): re-mounted bee6ebd4-655d-49cc-b7e5-c5bf9cb4c274 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.12.9-yocto-standard #1 SMP PREEMPT Fri Jan 10 17:45:46 UTC 2025 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 30 02:34:01 2025
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK
D-BUS per-session daemon address is: unix:path=/tmp/dbus-OJcjWQsTWx,guid=6c6c75b58a4c13e2f68fdcd0679ae51f
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 5.1 qemuarm hvc0

qemuarm login: Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[635]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=617 comm="connman-applet")
dbus-daemon[635]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
[ 1644.013520] hellomod: loading out-of-tree module taints kernel.
[ 1644.043800] Hello world!
[ 1652.058940] Cleaning up hellomod.
