[    0.000000] Linux version 6.12.11-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Thu Jan 30 15:39:25 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 493972772 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000859] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000884] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000886] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002754] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002903] ACPI: Early table checksum verification disabled
[    0.002905] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002909] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002913] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002916] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002918] ACPI: FACS 0x000000001FFE0000 000040
[    0.002919] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002921] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002922] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002923] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002925] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002926] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002926] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002927] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002927] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002927] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002928] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002953] Zone ranges:
[    0.002954]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002955]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002956]   Normal   empty
[    0.002956] Movable zone start for each node
[    0.002957] Early memory node ranges
[    0.002957]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002958]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002959] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003059] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003079] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004003] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004316] ACPI: PM-Timer IO Port: 0x608
[    0.004323] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004342] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004344] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004345] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004346] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004347] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004347] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004349] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004350] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004352] TSC deadline timer available
[    0.004355] CPU topo: Max. logical packages:   1
[    0.004355] CPU topo: Max. logical dies:       1
[    0.004356] CPU topo: Max. dies per package:   1
[    0.004359] CPU topo: Max. threads per core:   1
[    0.004359] CPU topo: Num. cores per package:     4
[    0.004360] CPU topo: Num. threads per package:   4
[    0.004360] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004368] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004377] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004378] Booting paravirtualized kernel on KVM
[    0.004379] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004382] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004544] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288
[    0.004564] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004614] random: crng init done
[    0.004628] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004636] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004658] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004822] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005240] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005252] ftrace: allocating 53685 entries in 210 pages
[    0.013538] ftrace: allocated 210 pages with 4 groups
[    0.013559] Dynamic Preempt: full
[    0.013678] rcu: Preemptible hierarchical RCU implementation.
[    0.013679] rcu: 	RCU event tracing is enabled.
[    0.013679] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.013680] 	All grace periods are expedited (rcu_expedited).
[    0.013680] 	Trampoline variant of Tasks RCU enabled.
[    0.013681] 	Rude variant of Tasks RCU enabled.
[    0.013681] 	Tracing variant of Tasks RCU enabled.
[    0.013682] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.013682] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.013685] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013687] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013688] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018297] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018470] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018526] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024350] Console: colour VGA+ 80x25
[    0.024385] printk: legacy console [ttyS0] enabled
[    0.138143] ACPI: Core revision 20240827
[    0.138880] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.141356] APIC: Switch to symmetric I/O mode setup
[    0.142267] x2apic enabled
[    0.142963] APIC: Switched APIC routing to: physical x2apic
[    0.144710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.145652] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.147308] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.148413] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.149308] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.150310] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.151310] Spectre V2 : Mitigation: Retpolines
[    0.152308] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.153308] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.154309] Speculative Store Bypass: Vulnerable
[    0.155319] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.156308] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.157308] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.158309] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.159308] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.176590] Freeing SMP alternatives memory: 56K
[    0.177310] pid_max: default: 32768 minimum: 301
[    0.178063] LSM: initializing lsm=capability,landlock
[    0.178332] landlock: Up and running.
[    0.179325] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.180309] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.181470] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.182407] Performance Events: AMD PMU driver.
[    0.183146] ... version:                0
[    0.183311] ... bit width:              48
[    0.183946] ... generic registers:      4
[    0.184310] ... value mask:             0000ffffffffffff
[    0.185172] ... max period:             00007fffffffffff
[    0.185310] ... fixed-purpose events:   0
[    0.185932] ... event mask:             000000000000000f
[    0.186381] signal: max sigframe size: 1776
[    0.187106] rcu: Hierarchical SRCU implementation.
[    0.187311] rcu: 	Max phase no-delay instances is 400.
[    0.188125] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.188406] smp: Bringing up secondary CPUs ...
[    0.189202] smpboot: x86: Booting SMP configuration:
[    0.189313] .... node  #0, CPUs:      #1 #2 #3
[    0.225368] smp: Brought up 1 node, 4 CPUs
[    0.226312] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.227667] Memory: 471760K/523736K available (20480K kernel code, 2433K rwdata, 5788K rodata, 3488K init, 2076K bss, 47760K reserved, 0K cma-reserved)
[    0.228371] devtmpfs: initialized
[    0.229068] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.229313] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.230331] pinctrl core: initialized pinctrl subsystem
[    0.231447] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.232391] thermal_sys: Registered thermal governor 'step_wise'
[    0.232392] thermal_sys: Registered thermal governor 'user_space'
[    0.233320] cpuidle: using governor menu
[    0.235047] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.235312] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.236316] PCI: Using configuration type 1 for base access
[    0.237256] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.255310] raid6: sse2x4   gen() 24625 MB/s
[    0.272310] raid6: sse2x2   gen() 25798 MB/s
[    0.289311] raid6: sse2x1   gen()  6924 MB/s
[    0.290031] raid6: using algorithm sse2x2 gen() 25798 MB/s
[    0.307310] raid6: .... xor() 19116 MB/s, rmw enabled
[    0.308121] raid6: using ssse3x2 recovery algorithm
[    0.308364] ACPI: Added _OSI(Module Device)
[    0.309045] ACPI: Added _OSI(Processor Device)
[    0.309310] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.310049] ACPI: Added _OSI(Processor Aggregator Device)
[    0.310713] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.313455] ACPI: Interpreter enabled
[    0.315330] ACPI: PM: (supports S0 S3 S5)
[    0.316315] ACPI: Using IOAPIC for interrupt routing
[    0.318345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.322318] PCI: Using E820 reservations for host bridge windows
[    0.324413] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.329634] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.331320] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.336365] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.339379] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.341392] PCI host bridge to bus 0000:00
[    0.343317] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.346314] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.349314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.351314] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.355314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.360315] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.363317] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.366433] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.370315] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.378314] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.383314] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.397314] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.401106] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.404307] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.408314] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.412313] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.420311] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.423806] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.427315] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.431756] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.434314] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.437239] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.438352] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.441339] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.444311] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.445929] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.452311] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.457868] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.460893] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.463008] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.466311] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.468852] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.470913] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.473060] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.474635] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.480434] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.481672] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.483478] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.488557] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.489903] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.493149] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.495786] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.497100] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.498356] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.499343] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.500335] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.502369] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.503349] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.504342] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.505327] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.506289] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.507314] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.508265] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.509313] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.510281] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.511317] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.512267] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.512314] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.514496] iommu: Default domain type: Translated
[    0.515270] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.516359] SCSI subsystem initialized
[    0.517346] ACPI: bus type USB registered
[    0.518319] usbcore: registered new interface driver usbfs
[    0.519190] usbcore: registered new interface driver hub
[    0.519315] usbcore: registered new device driver usb
[    0.520126] pps_core: LinuxPPS API ver. 1 registered
[    0.521310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.522313] PTP clock support registered
[    0.523433] Bluetooth: Core ver 2.22
[    0.524315] NET: Registered PF_BLUETOOTH protocol family
[    0.525158] Bluetooth: HCI device and connection manager initialized
[    0.526311] Bluetooth: HCI socket layer initialized
[    0.527084] Bluetooth: L2CAP socket layer initialized
[    0.527312] Bluetooth: SCO socket layer initialized
[    0.528341] PCI: Using ACPI for IRQ routing
[    0.574479] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.575308] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.575308] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.579313] vgaarb: loaded
[    0.579804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.580310] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.586351] clocksource: Switched to clocksource kvm-clock
[    0.587318] pnp: PnP ACPI init
[    0.587882] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.589185] pnp: PnP ACPI: found 5 devices
[    0.597531] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.599004] NET: Registered PF_INET protocol family
[    0.599780] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.601069] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.602419] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.603738] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.604957] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.607057] TCP: Hash tables configured (established 4096 bind 4096)
[    0.610238] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.611280] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.612384] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.613513] RPC: Registered named UNIX socket transport module.
[    0.614463] RPC: Registered udp transport module.
[    0.615216] RPC: Registered tcp transport module.
[    0.615962] RPC: Registered tcp-with-tls transport module.
[    0.616803] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.617824] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.618808] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.619798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.620889] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.622012] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.623096] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.624428] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.625675] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.626878] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.628210] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.629480] PCI: CLS 0 bytes, default 64
[    0.630200] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.632761] Initialise system trusted keyrings
[    0.633588] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.634752] NFS: Registering the id_resolver key type
[    0.636500] Key type id_resolver registered
[    0.637180] Key type id_legacy registered
[    0.638456] Key type cifs.idmap registered
[    0.646087] xor: automatically using best checksumming function   avx       
[    0.647209] Key type asymmetric registered
[    0.647842] Asymmetric key parser 'x509' registered
[    0.648627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.649793] io scheduler mq-deadline registered
[    0.650532] io scheduler kyber registered
[    0.651193] io scheduler bfq registered
[    0.652027] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.656896] ACPI: button: Power Button [PWRF]
[    0.658182] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.659800] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.661402] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.668577] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.670350] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.671471] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.672871] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.675273] Linux agpgart interface v0.103
[    0.676032] ACPI: bus type drm_connector registered
[    0.676864] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.677722] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.680547] Console: switching to colour dummy device 80x25
[    0.681569] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.681570] [drm] features: -context_init
[    0.683664] [drm] number of scanouts: 1
[    0.684299] [drm] number of cap sets: 0
[    0.685205] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.687085] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.715658] Console: switching to colour frame buffer device 160x50
[    0.738563] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.744393] brd: module loaded
[    0.746855] loop: module loaded
[    0.748399] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.752747] virtio_blk virtio3: [vda] 828436 512-byte logical blocks (424 MB/405 MiB)
[    0.759350] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.762760] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.765442] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.769181] scsi host0: ahci
[    0.770752] scsi host1: ahci
[    0.772281] scsi host2: ahci
[    0.773795] scsi host3: ahci
[    0.775372] scsi host4: ahci
[    0.776920] scsi host5: ahci
[    0.778194] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.781587] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.784982] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.788364] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.791749] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.794706] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.799416] e100: Intel(R) PRO/100 Network Driver
[    0.801110] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.802924] e1000: Intel(R) PRO/1000 Network Driver
[    0.804522] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.806422] e1000e: Intel(R) PRO/1000 Network Driver
[    0.808086] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.810108] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.811953] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.814810] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.817575] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.820257] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.822413] hub 1-0:1.0: USB hub found
[    0.823643] hub 1-0:1.0: 2 ports detected
[    0.825393] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.828151] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.831730] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.839879] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.842629] hub 2-0:1.0: USB hub found
[    0.844331] hub 2-0:1.0: 6 ports detected
[    0.867083] hub 1-0:1.0: USB hub found
[    0.868794] hub 1-0:1.0: 2 ports detected
[    0.870579] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.872861] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.876265] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.878921] hub 3-0:1.0: USB hub found
[    0.880526] hub 3-0:1.0: 2 ports detected
[    0.883632] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.885822] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.889191] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.891872] hub 4-0:1.0: USB hub found
[    0.893439] hub 4-0:1.0: 2 ports detected
[    0.899120] usbcore: registered new interface driver usb-storage
[    0.901596] usbcore: registered new interface driver usbserial_generic
[    0.904251] usbserial: USB Serial support registered for generic
[    0.906657] usbcore: registered new interface driver ftdi_sio
[    0.908994] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.912137] usbcore: registered new interface driver pl2303
[    0.914622] usbserial: USB Serial support registered for pl2303
[    0.917273] i8042: PNP: No PS/2 controller found.
[    0.919433] mousedev: PS/2 mouse device common for all mice
[    0.922061] rtc_cmos 00:03: RTC can wake from S4
[    0.925056] rtc_cmos 00:03: registered as rtc0
[    0.927279] rtc_cmos 00:03: setting system clock to 2025-01-31T15:43:46 UTC (1738338226)
[    0.930903] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.934542] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.934969] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.938374] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.941102] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.943109] sdhci: Secure Digital Host Controller Interface driver
[    0.948107] sdhci: Copyright(c) Pierre Ossman
[    0.949397] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.951110] usbcore: registered new interface driver usbhid
[    0.952859] usbhid: USB HID core driver
[    0.954129] u32 classifier
[    0.955032]     input device check on
[    0.956253]     Actions configured
[    0.957466] NET: Registered PF_INET6 protocol family
[    0.959439] Segment Routing with IPv6
[    0.960665] In-situ OAM (IOAM) with IPv6
[    0.961959] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.963962] NET: Registered PF_PACKET protocol family
[    0.965585] Bridge firewalling registered
[    0.966885] l2tp_core: L2TP core driver, V2.0
[    0.967600] Key type dns_resolver registered
[    0.968376] NET: Registered PF_VSOCK protocol family
[    0.969630] IPI shorthand broadcast: enabled
[    0.971061] sched_clock: Marking stable (846003205, 124833223)->(989272881, -18436453)
[    0.972398] registered taskstats version 1
[    0.973091] Loading compiled-in X.509 certificates
[    0.974504] Key type .fscrypt registered
[    0.975213] Key type fscrypt-provisioning registered
[    0.976199] Btrfs loaded, zoned=no, fsverity=no
[    0.977829] Key type encrypted registered
[    0.978618] printk: legacy console [netcon0] enabled
[    0.979446] netconsole: network logging started
[    1.086875] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.113591] ata6: SATA link down (SStatus 0 SControl 300)
[    1.116095] ata1: SATA link down (SStatus 0 SControl 300)
[    1.118560] ata5: SATA link down (SStatus 0 SControl 300)
[    1.121114] ata4: SATA link down (SStatus 0 SControl 300)
[    1.123590] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.126567] ata2: SATA link down (SStatus 0 SControl 300)
[    1.128871] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.131342] ata3.00: applying bridge limits
[    1.133315] ata3.00: configured for UDMA/100
[    1.135701] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.166214] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.169083] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.191855] IP-Config: Complete:
[    1.193226]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.197140]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.199405]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.199408]      nameserver0=8.8.8.8
[    1.204134] clk: Disabling unused clocks
[    1.206251] md: Waiting for all devices to be available before autodetect
[    1.208478] md: If you don't use raid, use raid=noautodetect
[    1.210314] md: Autodetecting RAID arrays.
[    1.211644] md: autorun ...
[    1.212569] md: ... autorun DONE.
[    1.220553] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.223315] EXT4-fs (vda): mounted filesystem c1e98f3a-34c5-423f-ac44-04c525fdb543 r/w with ordered data mode. Quota mode: disabled.
[    1.225804] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.229679] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.235656] devtmpfs: mounted
[    1.238012] Freeing unused kernel image (initmem) memory: 3488K
[    1.240065] Write protecting the kernel read-only data: 26624k
[    1.242349] Freeing unused kernel image (rodata/data gap) memory: 356K
[    1.244593] Run /sbin/init as init process
INIT: version 3.13 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.321987] udevd[148]: starting version 3.2.14
[    1.328966] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.332643] udevd[148]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.340124] udevd[149]: starting eudev-3.2.14
[    1.345865] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.478739] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.534700] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.602562] EXT4-fs (vda): re-mounted c1e98f3a-34c5-423f-ac44-04c525fdb543 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.144 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.144 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.144 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCr0qeW6lMGrJKNj2DT13XwhJpfrG/Asez4uFSTc/XdIlDxAeQnnRQmEszRF0RFhVwfCiPJ0DEsPWc7tPVf1duo0X3yw9HPseN6w838NshXSMYRmNmRUwKXKEJd3n45gxUbG3fPeMxjZZVyFjHKCIMmPME9XQ65gnuI8E2aylDBgfvyfIQ38slPDR4Q/a/JGNIK4v66jnuRXwSxxhBCGmZJBQvgDv7yZw04ponuWNOoyLZENqonyhm3rvooAsV2JC0DbB/+FFhb3/YpgmYIi8pzBw6UtMtFuND0XU9E63ExvE5PwxzLlMqhsJiY2CpztCbFuqrR3d7/ph3NkN+JMfaP root@qemux86-64
Fingerprint: SHA256:vM6eveabW+IzyyRBM+1KgO8TDZu36W4bUiiYjT7TzSk
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.243800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.244724] Bluetooth: BNEP filters: protocol multicast
[    2.245579] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
[   71.709727] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
00:01:09.863 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5985, uid: 0, gid: 0)[0m
00:01:09.865 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:09.866 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
[   71.724702] udevd[149]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
