[    0.000000] Linux version 5.15.178-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x000000009fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 120831
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 463072K/524284K available (12725K kernel code, 1901K rwdata, 2880K rodata, 456K init, 348K bss, 61212K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467561969 ns
[    0.000068] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884900861ns
[    0.005111] Console: colour dummy device 80x25
[    0.005532] printk: console [tty0] enabled
[    0.006037] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.15.178-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x000000009fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 120831
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 463072K/524284K available (12725K kernel code, 1901K rwdata, 2880K rodata, 456K init, 348K bss, 61212K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467561969 ns
[    0.000068] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884900861ns
[    0.005111] Console: colour dummy device 80x25
[    0.005532] printk: console [tty0] enabled
[    0.006037] printk: bootconsole [uart8250] disabled
[    0.007275] Calibrating delay loop... 2531.32 BogoMIPS (lpj=12656640)
[    0.111257] pid_max: default: 32768 minimum: 301
[    0.111765] LSM: Security Framework initializing
[    0.112437] landlock: Up and running.
[    0.113746] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.113820] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.134431] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.135038] rcu: Hierarchical SRCU implementation.
[    0.138419] smp: Bringing up secondary CPUs ...
[    0.138496] smp: Brought up 1 node, 1 CPU
[    0.145420] devtmpfs: initialized
[    0.149722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.149858] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.155454] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.363933] raid6: int64x8  gen()   939 MB/s
[    0.534337] raid6: int64x8  xor()   739 MB/s
[    0.705143] raid6: int64x4  gen()  1710 MB/s
[    0.877149] raid6: int64x4  xor()  1100 MB/s
[    1.048165] raid6: int64x2  gen()   973 MB/s
[    1.221022] raid6: int64x2  xor()  1342 MB/s
[    1.393225] raid6: int64x1  gen()  1773 MB/s
[    1.564207] raid6: int64x1  xor()  1127 MB/s
[    1.564300] raid6: using algorithm int64x1 gen() 1773 MB/s
[    1.564334] raid6: .... xor() 1127 MB/s, rmw enabled
[    1.564409] raid6: using intx1 recovery algorithm
[    1.568183] vgaarb: loaded
[    1.568982] SCSI subsystem initialized
[    1.569309] usbcore: registered new interface driver usbfs
[    1.569489] usbcore: registered new interface driver hub
[    1.569608] usbcore: registered new device driver usb
[    1.569808] pps_core: LinuxPPS API ver. 1 registered
[    1.569836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.569918] PTP clock support registered
[    1.577062] PCI host bridge to bus 0000:00
[    1.577265] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.577603] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.577706] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.578685] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.579128] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.579171] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.579206] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.579241] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.579282] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.580624] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.580989] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.581138] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.581207] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.581241] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.581292] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.581325] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.581520] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.581571] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.581866] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.586102] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.586183] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.586460] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.586499] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.586564] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.586597] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.586819] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.587006] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.587049] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.587128] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.587200] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.587360] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.587395] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.587430] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.587580] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.587612] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.587646] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.588006] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.588854] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.589035] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.589101] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.589195] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.589268] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.589308] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.589355] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.589401] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.589435] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.589458] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.589485] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.589509] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.590897] clocksource: Switched to clocksource MIPS
[    1.655999] NET: Registered PF_INET protocol family
[    1.656706] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.660609] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.660751] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.660816] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.661102] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.661223] TCP: Hash tables configured (established 4096 bind 4096)
[    1.661988] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.662156] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.663135] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.671992] RPC: Registered named UNIX socket transport module.
[    1.672057] RPC: Registered udp transport module.
[    1.672079] RPC: Registered tcp transport module.
[    1.672100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.672751] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.673273] PCI: CLS 0 bytes, default 32
[    1.893818] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    1.902897] NFS: Registering the id_resolver key type
[    1.903716] Key type id_resolver registered
[    1.903764] Key type id_legacy registered
[    1.905003] Key type cifs.idmap registered
[    1.922740] xor: measuring software checksum speed
[    1.923811]    8regs           :  3385 MB/sec
[    1.924810]    8regs_prefetch  :  3396 MB/sec
[    1.925978]    32regs          :  2872 MB/sec
[    1.927082]    32regs_prefetch :  3040 MB/sec
[    1.927121] xor: using function: 8regs_prefetch (3396 MB/sec)
[    1.927343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.927451] io scheduler mq-deadline registered
[    1.927512] io scheduler kyber registered
[    1.930293] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.932109] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.932696] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.933858] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.937150] printk: console [ttyS0] disabled
[    1.959497] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.959565] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.989714] printk: console [ttyS0] enabled
[    2.011900] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.012180] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.012473] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.017509] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.018242] [drm] Found bochs VGA, ID 0xb0c5.
[    2.018453] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.020609] [drm] Found EDID data blob.
[    2.021282] random: crng init done
[    2.024556] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.051155] Console: switching to colour frame buffer device 128x48
[    2.066773] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.082546] brd: module loaded
[    2.085910] virtio_blk virtio2: [vda] 1051008 512-byte logical blocks (538 MB/513 MiB)
[    2.100779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.101272] ehci-pci: EHCI PCI platform driver
[    2.101705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.102138] ohci-pci: OHCI PCI platform driver
[    2.104551] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.105308] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.107752] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.109528] usbcore: registered new interface driver usbhid
[    2.109799] usbhid: USB HID core driver
[    2.110358] u32 classifier
[    2.110518]     input device check on
[    2.111047]     Actions configured
[    2.112280] NET: Registered PF_INET6 protocol family
[    2.116942] Segment Routing with IPv6
[    2.117327] In-situ OAM (IOAM) with IPv6
[    2.118051] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.119981] NET: Registered PF_PACKET protocol family
[    2.120849] Bridge firewalling registered
[    2.121714] Key type dns_resolver registered
[    2.122285] NET: Registered PF_VSOCK protocol family
[    2.130712] Key type .fscrypt registered
[    2.132714] Key type fscrypt-provisioning registered
[    2.140098] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.154083] Key type encrypted registered
[    2.157896] printk: console [netcon0] enabled
[    2.167615] netconsole: network logging started
[    2.212273] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.260994] IP-Config: Complete:
[    2.266594]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    2.268935]      host=192.168.7.10, domain=, nis-domain=(none)
[    2.272116]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.272162]      nameserver0=8.8.8.8
[    2.279254] clk: Disabling unused clocks
[    2.862889] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.870042] md: Waiting for all devices to be available before autodetect
[    2.878407] md: If you don't use raid, use raid=noautodetect
[    2.886377] md: Autodetecting RAID arrays.
[    2.894140] md: autorun ...
[    2.909075] md: ... autorun DONE.
[    2.954771] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    2.960455] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.971709] devtmpfs: mounted
[    2.996454] Freeing unused kernel image (initmem) memory: 456K
[    3.000746] This architecture does not have kernel memory protection.
[    3.002938] Run /sbin/init as init process
[    3.018735] process '/sbin/init.sysvinit' started with executable stack
[    3.140947] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.291800] udevd[118]: starting version 3.2.10
[    4.343845] udevd[119]: starting eudev-3.2.10
[    9.780809] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.15.178-yocto-standard #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 12 02:57:05 2025
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-GCIxAm7m9B,guid=20e706ac93efe05a3d9eb28367ac0e03

Poky (Yocto Project Reference Distro) 4.0.24 qemumips64 /dev/ttyS0

qemumips64 login: 