[    0.000000] Linux version 5.15.178-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720352K/786428K available (12725K kernel code, 1901K rwdata, 2880K rodata, 456K init, 348K bss, 66076K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467678045 ns
[    0.000065] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12885031932ns
[    0.004844] Console: colour dummy device 80x25
[    0.005189] printk: console [tty0] enabled
[    0.005611] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.15.178-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720352K/786428K available (12725K kernel code, 1901K rwdata, 2880K rodata, 456K init, 348K bss, 66076K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467678045 ns
[    0.000065] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12885031932ns
[    0.004844] Console: colour dummy device 80x25
[    0.005189] printk: console [tty0] enabled
[    0.005611] printk: bootconsole [uart8250] disabled
[    0.006735] Calibrating delay loop... 2531.32 BogoMIPS (lpj=12656640)
[    0.111139] pid_max: default: 32768 minimum: 301
[    0.111649] LSM: Security Framework initializing
[    0.112310] landlock: Up and running.
[    0.113628] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.113703] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.133827] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.134414] rcu: Hierarchical SRCU implementation.
[    0.137715] smp: Bringing up secondary CPUs ...
[    0.137794] smp: Brought up 1 node, 1 CPU
[    0.144581] devtmpfs: initialized
[    0.148857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.148984] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.154424] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.363307] raid6: int64x8  gen()   939 MB/s
[    0.533112] raid6: int64x8  xor()   745 MB/s
[    0.704116] raid6: int64x4  gen()  1727 MB/s
[    0.874643] raid6: int64x4  xor()  1097 MB/s
[    1.045507] raid6: int64x2  gen()   979 MB/s
[    1.216852] raid6: int64x2  xor()  1282 MB/s
[    1.387071] raid6: int64x1  gen()  1749 MB/s
[    1.557808] raid6: int64x1  xor()  1111 MB/s
[    1.557893] raid6: using algorithm int64x1 gen() 1749 MB/s
[    1.557924] raid6: .... xor() 1111 MB/s, rmw enabled
[    1.557993] raid6: using intx1 recovery algorithm
[    1.561684] vgaarb: loaded
[    1.562474] SCSI subsystem initialized
[    1.562810] usbcore: registered new interface driver usbfs
[    1.562987] usbcore: registered new interface driver hub
[    1.563106] usbcore: registered new device driver usb
[    1.563316] pps_core: LinuxPPS API ver. 1 registered
[    1.563342] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.563415] PTP clock support registered
[    1.570409] PCI host bridge to bus 0000:00
[    1.570613] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.570943] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.571043] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.572059] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.572492] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.572539] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.572573] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.572605] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.572645] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.573959] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.574306] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.574452] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.574525] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.574558] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.574602] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.574634] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.574826] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.574877] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.575170] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.575442] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.575515] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.575777] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.575814] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.575878] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.575912] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.576130] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.576310] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.576348] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.576421] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.576484] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.576645] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.576680] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.576715] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.576870] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.576904] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.576940] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.577290] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.578187] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.578366] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.578431] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.578527] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.578596] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.578635] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.578682] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.578730] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.578765] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.578789] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.578816] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.578841] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.580182] clocksource: Switched to clocksource MIPS
[    1.645370] NET: Registered PF_INET protocol family
[    1.646084] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.650506] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    1.650670] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.650727] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.651043] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.651204] TCP: Hash tables configured (established 8192 bind 8192)
[    1.651963] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.652133] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.653097] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.661410] RPC: Registered named UNIX socket transport module.
[    1.661471] RPC: Registered udp transport module.
[    1.661495] RPC: Registered tcp transport module.
[    1.661515] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.662169] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.662667] PCI: CLS 0 bytes, default 32
[    1.883590] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    1.892656] NFS: Registering the id_resolver key type
[    1.893425] Key type id_resolver registered
[    1.893466] Key type id_legacy registered
[    1.894682] Key type cifs.idmap registered
[    1.912625] xor: measuring software checksum speed
[    1.913685]    8regs           :  3378 MB/sec
[    1.914686]    8regs_prefetch  :  3388 MB/sec
[    1.915841]    32regs          :  2902 MB/sec
[    1.916947]    32regs_prefetch :  3034 MB/sec
[    1.916985] xor: using function: 8regs_prefetch (3388 MB/sec)
[    1.917199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.917307] io scheduler mq-deadline registered
[    1.917372] io scheduler kyber registered
[    1.920205] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.921842] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.922392] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.923474] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.926725] printk: console [ttyS0] disabled
[    1.949151] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.949215] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.972061] printk: console [ttyS0] enabled
[    1.993874] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.994167] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.994429] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.999386] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.000462] [drm] Found bochs VGA, ID 0xb0c5.
[    2.000680] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.002835] [drm] Found EDID data blob.
[    2.005639] random: crng init done
[    2.006466] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.032983] Console: switching to colour frame buffer device 128x48
[    2.037913] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.064500] brd: module loaded
[    2.067783] virtio_blk virtio2: [vda] 4726190 512-byte logical blocks (2.42 GB/2.25 GiB)
[    2.079293] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.079747] ehci-pci: EHCI PCI platform driver
[    2.080227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.080643] ohci-pci: OHCI PCI platform driver
[    2.083016] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.083764] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.086143] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.087893] usbcore: registered new interface driver usbhid
[    2.088164] usbhid: USB HID core driver
[    2.088721] u32 classifier
[    2.088876]     input device check on
[    2.089086]     Actions configured
[    2.090527] NET: Registered PF_INET6 protocol family
[    2.097010] Segment Routing with IPv6
[    2.097388] In-situ OAM (IOAM) with IPv6
[    2.098098] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.100081] NET: Registered PF_PACKET protocol family
[    2.100859] Bridge firewalling registered
[    2.101722] Key type dns_resolver registered
[    2.102279] NET: Registered PF_VSOCK protocol family
[    2.107282] Key type .fscrypt registered
[    2.109270] Key type fscrypt-provisioning registered
[    2.114710] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.128193] Key type encrypted registered
[    2.132834] printk: console [netcon0] enabled
[    2.135839] netconsole: network logging started
[    2.191517] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.240318] IP-Config: Complete:
[    2.245169]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    2.248955]      host=192.168.7.6, domain=, nis-domain=(none)
[    2.253906]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.253952]      nameserver0=8.8.8.8
[    2.262306] clk: Disabling unused clocks
[    2.830946] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.833898] md: Waiting for all devices to be available before autodetect
[    2.835967] md: If you don't use raid, use raid=noautodetect
[    2.838019] md: Autodetecting RAID arrays.
[    2.841083] md: autorun ...
[    2.843974] md: ... autorun DONE.
[    2.868450] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    2.871993] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.876546] devtmpfs: mounted
[    2.905054] Freeing unused kernel image (initmem) memory: 456K
[    2.908129] This architecture does not have kernel memory protection.
[    2.915341] Run /sbin/init as init process
[    2.928828] process '/sbin/init.sysvinit' started with executable stack
[    3.130667] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.283527] udevd[118]: starting version 3.2.10
[    4.336543] udevd[119]: starting eudev-3.2.10
[   10.762448] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
ALSA: Restoring mixer settings...
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.15.178-yocto-standard #1 SMP PREEMPT Mon Feb 10 00:15:49 UTC 2025 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 14:53:23 2025
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-u2JjZ5PD5H,guid=cb7fbecd1a2c1b48a62ee70567ae0766
[A[122G[ ok ]
Starting Telephony daemon
Using calibration data stored in /etc/pointercal.xinput
No makedumpfile found.
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.0.25 qemumips64 ttyS0

qemumips64 login: [  994.789602] hellomod: loading out-of-tree module taints kernel.
[  994.796702] Hello world!
[  997.240684] Cleaning up hellomod.
