[ 0.000000] Linux version 6.12.13-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Feb 10 00:32:31 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 2668461165 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2750.000 MHz processor [ 0.000904] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000936] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000939] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000989] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002908] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.056878] ACPI: Early table checksum verification disabled [ 0.056884] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.056893] ACPI: RSDT 0x000000007FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056898] ACPI: FACP 0x000000007FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056904] ACPI: DSDT 0x000000007FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056906] ACPI: FACS 0x000000007FFE0000 000040 [ 0.056907] ACPI: APIC 0x000000007FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056909] ACPI: HPET 0x000000007FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056910] ACPI: MCFG 0x000000007FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056912] ACPI: WAET 0x000000007FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.056913] ACPI: Reserving FACP table memory at [mem 0x7ffe2217-0x7ffe230a] [ 0.056915] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2216] [ 0.056915] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.056916] ACPI: Reserving APIC table memory at [mem 0x7ffe230b-0x7ffe239a] [ 0.056916] ACPI: Reserving HPET table memory at [mem 0x7ffe239b-0x7ffe23d2] [ 0.056917] ACPI: Reserving MCFG table memory at [mem 0x7ffe23d3-0x7ffe240e] [ 0.056917] ACPI: Reserving WAET table memory at [mem 0x7ffe240f-0x7ffe2436] [ 0.056978] Zone ranges: [ 0.056979] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.056980] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.056981] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.056982] Movable zone start for each node [ 0.056983] Early memory node ranges [ 0.056983] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.056984] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.056985] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.056986] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.090438] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.090462] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.624440] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.624516] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.625000] ACPI: PM-Timer IO Port: 0x608 [ 0.625016] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.625050] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.625053] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.625055] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.625057] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.625058] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.625059] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.625062] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.625063] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.625069] TSC deadline timer available [ 0.625074] CPU topo: Max. logical packages: 1 [ 0.625075] CPU topo: Max. logical dies: 1 [ 0.625076] CPU topo: Max. dies per package: 1 [ 0.625080] CPU topo: Max. threads per core: 1 [ 0.625081] CPU topo: Num. cores per package: 4 [ 0.625082] CPU topo: Num. threads per package: 4 [ 0.625083] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.625100] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.625120] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.625122] Booting paravirtualized kernel on KVM [ 0.625124] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.625130] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.627205] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288 [ 0.627239] Kernel command line: root=/dev/vda rw ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.627317] random: crng init done [ 0.672551] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.674993] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.675036] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.709023] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.709030] software IO TLB: area num 4. [ 0.709032] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.718665] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.718691] ftrace: allocating 53692 entries in 210 pages [ 0.730097] ftrace: allocated 210 pages with 4 groups [ 0.730149] Dynamic Preempt: full [ 0.731998] rcu: Preemptible hierarchical RCU implementation. [ 0.731999] rcu: RCU event tracing is enabled. [ 0.732000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.732002] All grace periods are expedited (rcu_expedited). [ 0.732003] Trampoline variant of Tasks RCU enabled. [ 0.732004] Rude variant of Tasks RCU enabled. [ 0.732004] Tracing variant of Tasks RCU enabled. [ 0.732005] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.732006] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.732013] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.732015] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.732016] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.765812] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.766032] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.766116] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.771366] Console: colour VGA+ 80x25 [ 0.771411] printk: legacy console [ttyS0] enabled [ 0.905538] ACPI: Core revision 20240827 [ 0.906326] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.907912] APIC: Switch to symmetric I/O mode setup [ 0.909576] x2apic enabled [ 0.910320] APIC: Switched APIC routing to: physical x2apic [ 0.912231] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.913297] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.915084] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.916217] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.917084] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.918087] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.919085] Spectre V2 : Mitigation: Retpolines [ 0.920084] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.921084] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.922084] Speculative Store Bypass: Vulnerable [ 0.922835] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.923085] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.924085] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.925085] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.926084] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.947485] Freeing SMP alternatives memory: 56K [ 0.948089] pid_max: default: 32768 minimum: 301 [ 0.948820] LSM: initializing lsm=capability,landlock [ 0.949117] landlock: Up and running. [ 0.950110] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.951088] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.953198] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.954217] Performance Events: AMD PMU driver. [ 0.954963] ... version: 0 [ 0.955086] ... bit width: 48 [ 0.955718] ... generic registers: 4 [ 0.956086] ... value mask: 0000ffffffffffff [ 0.956934] ... max period: 00007fffffffffff [ 0.957087] ... fixed-purpose events: 0 [ 0.957706] ... event mask: 000000000000000f [ 0.958182] signal: max sigframe size: 1776 [ 0.958883] rcu: Hierarchical SRCU implementation. [ 0.959086] rcu: Max phase no-delay instances is 400. [ 0.960011] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.960213] smp: Bringing up secondary CPUs ... [ 0.961053] smpboot: x86: Booting SMP configuration: [ 0.961091] .... node #0, CPUs: #1 #2 #3 [ 0.999114] smp: Brought up 1 node, 4 CPUs [ 1.000894] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 1.001321] Memory: 5081816K/5221848K available (20480K kernel code, 2433K rwdata, 5788K rodata, 3488K init, 2076K bss, 134056K reserved, 0K cma-reserved) [ 1.002173] devtmpfs: initialized [ 1.003095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.004089] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.006143] pinctrl core: initialized pinctrl subsystem [ 1.007459] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.008222] thermal_sys: Registered thermal governor 'step_wise' [ 1.008224] thermal_sys: Registered thermal governor 'user_space' [ 1.009109] cpuidle: using governor menu [ 1.011130] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.012089] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.013098] PCI: Using configuration type 1 for base access [ 1.014138] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.033088] raid6: sse2x4 gen() 21013 MB/s [ 1.051088] raid6: sse2x2 gen() 20003 MB/s [ 1.068089] raid6: sse2x1 gen() 6013 MB/s [ 1.068872] raid6: using algorithm sse2x4 gen() 21013 MB/s [ 1.086087] raid6: .... xor() 2946 MB/s, rmw enabled [ 1.087089] raid6: using ssse3x2 recovery algorithm [ 1.088145] ACPI: Added _OSI(Module Device) [ 1.089073] ACPI: Added _OSI(Processor Device) [ 1.089087] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.089962] ACPI: Added _OSI(Processor Aggregator Device) [ 1.090625] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.092155] ACPI: Interpreter enabled [ 1.092777] ACPI: PM: (supports S0 S3 S5) [ 1.093087] ACPI: Using IOAPIC for interrupt routing [ 1.094019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.094087] PCI: Using E820 reservations for host bridge windows [ 1.095127] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.096900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.097090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.098109] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.099112] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.100129] PCI host bridge to bus 0000:00 [ 1.100814] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.101088] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.102086] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.103086] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.104087] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.105087] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.106087] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.107068] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.107558] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.110087] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.112087] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.116088] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.119087] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.120653] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.122087] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.123573] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.128072] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.129549] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.132658] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.136092] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.138089] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.141090] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.142137] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.143629] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.145087] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.146661] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.151089] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.153717] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.156037] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.157192] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.159505] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.160798] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.164407] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.166155] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.167542] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.170305] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.171563] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.172348] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.176088] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.177370] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.179114] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.181729] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.182854] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.183139] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.184135] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.185131] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.186134] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.187160] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.188137] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.189131] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.190121] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.191101] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.192094] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.193090] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.194090] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.195090] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.196094] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.197090] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.198384] iommu: Default domain type: Translated [ 1.199087] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.200139] SCSI subsystem initialized [ 1.200803] ACPI: bus type USB registered [ 1.201098] usbcore: registered new interface driver usbfs [ 1.202036] usbcore: registered new interface driver hub [ 1.202095] usbcore: registered new device driver usb [ 1.202992] pps_core: LinuxPPS API ver. 1 registered [ 1.203086] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.204089] PTP clock support registered [ 1.204760] Bluetooth: Core ver 2.22 [ 1.205095] NET: Registered PF_BLUETOOTH protocol family [ 1.205970] Bluetooth: HCI device and connection manager initialized [ 1.206088] Bluetooth: HCI socket layer initialized [ 1.206887] Bluetooth: L2CAP socket layer initialized [ 1.207091] Bluetooth: SCO socket layer initialized [ 1.207926] PCI: Using ACPI for IRQ routing [ 1.256209] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.257083] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.257083] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.257092] vgaarb: loaded [ 1.257722] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.258088] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.262150] clocksource: Switched to clocksource kvm-clock [ 1.265288] pnp: PnP ACPI init [ 1.266835] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.268597] pnp: PnP ACPI: found 5 devices [ 1.276084] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.278113] NET: Registered PF_INET protocol family [ 1.284240] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.286859] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.288771] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.290453] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.292239] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.294118] TCP: Hash tables configured (established 65536 bind 65536) [ 1.296859] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.298346] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.300104] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.301532] RPC: Registered named UNIX socket transport module. [ 1.302863] RPC: Registered udp transport module. [ 1.303896] RPC: Registered tcp transport module. [ 1.304938] RPC: Registered tcp-with-tls transport module. [ 1.306142] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.307561] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.308936] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.310286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.311802] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.313362] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.314944] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.316705] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.318243] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.319747] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.321318] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.322914] PCI: CLS 0 bytes, default 64 [ 1.323837] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.325274] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.328061] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.330899] Initialise system trusted keyrings [ 1.331957] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.333503] NFS: Registering the id_resolver key type [ 1.334612] Key type id_resolver registered [ 1.335529] Key type id_legacy registered [ 1.336696] Key type cifs.idmap registered [ 1.344674] xor: automatically using best checksumming function avx [ 1.346238] Key type asymmetric registered [ 1.347146] Asymmetric key parser 'x509' registered [ 1.348244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.349867] io scheduler mq-deadline registered [ 1.350867] io scheduler kyber registered [ 1.351780] io scheduler bfq registered [ 1.352880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.355112] ACPI: button: Power Button [PWRF] [ 1.356660] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.360259] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.362830] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.368805] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.370915] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.372233] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.373965] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.376626] Linux agpgart interface v0.103 [ 1.377597] ACPI: bus type drm_connector registered [ 1.378799] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.380041] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.383275] Console: switching to colour dummy device 80x25 [ 1.384649] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.384651] [drm] features: -context_init [ 1.388533] [drm] number of scanouts: 1 [ 1.389354] [drm] number of cap sets: 0 [ 1.391571] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.394260] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.413465] Console: switching to colour frame buffer device 160x50 [ 1.432923] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.438074] brd: module loaded [ 1.439368] loop: module loaded [ 1.440148] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.442428] virtio_blk virtio3: [vda] 1015856 512-byte logical blocks (520 MB/496 MiB) [ 1.446136] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.447782] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.449062] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.453556] scsi host0: ahci [ 1.454393] scsi host1: ahci [ 1.455190] scsi host2: ahci [ 1.455940] scsi host3: ahci [ 1.456695] scsi host4: ahci [ 1.457447] scsi host5: ahci [ 1.458101] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.459870] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.461612] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.463345] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.465062] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.466779] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.470054] e100: Intel(R) PRO/100 Network Driver [ 1.471014] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.472124] e1000: Intel(R) PRO/1000 Network Driver [ 1.473108] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.474291] e1000e: Intel(R) PRO/1000 Network Driver [ 1.475323] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.476544] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.477684] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.480386] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.481577] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.483608] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.490077] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.491454] hub 1-0:1.0: USB hub found [ 1.492162] hub 1-0:1.0: 6 ports detected [ 1.492991] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.493952] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.495389] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.496668] hub 2-0:1.0: USB hub found [ 1.497396] hub 2-0:1.0: 2 ports detected [ 1.498833] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.499804] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.501261] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.502398] hub 3-0:1.0: USB hub found [ 1.503005] hub 3-0:1.0: 2 ports detected [ 1.504456] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.505308] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.506618] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.507815] hub 4-0:1.0: USB hub found [ 1.508454] hub 4-0:1.0: 2 ports detected [ 1.509278] usbcore: registered new interface driver usb-storage [ 1.510462] usbcore: registered new interface driver usbserial_generic [ 1.511666] usbserial: USB Serial support registered for generic [ 1.512955] usbcore: registered new interface driver ftdi_sio [ 1.514024] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.515328] usbcore: registered new interface driver pl2303 [ 1.516275] usbserial: USB Serial support registered for pl2303 [ 1.517365] i8042: PNP: No PS/2 controller found. [ 1.518480] mousedev: PS/2 mouse device common for all mice [ 1.519674] rtc_cmos 00:03: RTC can wake from S4 [ 1.520983] rtc_cmos 00:03: registered as rtc0 [ 1.521862] rtc_cmos 00:03: setting system clock to 2025-02-26T14:56:41 UTC (1740581801) [ 1.523370] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.524985] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.524993] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.526552] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.527593] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.528846] sdhci: Secure Digital Host Controller Interface driver [ 1.531265] sdhci: Copyright(c) Pierre Ossman [ 1.532067] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.533377] usbcore: registered new interface driver usbhid [ 1.534493] usbhid: USB HID core driver [ 1.535320] u32 classifier [ 1.535930] input device check on [ 1.536684] Actions configured [ 1.537462] NET: Registered PF_INET6 protocol family [ 1.538738] Segment Routing with IPv6 [ 1.539498] In-situ OAM (IOAM) with IPv6 [ 1.540319] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.541637] NET: Registered PF_PACKET protocol family [ 1.542696] Bridge firewalling registered [ 1.543533] l2tp_core: L2TP core driver, V2.0 [ 1.544444] Key type dns_resolver registered [ 1.545417] NET: Registered PF_VSOCK protocol family [ 1.546744] IPI shorthand broadcast: enabled [ 1.566859] sched_clock: Marking stable (1422155139, 144043930)->(1735386969, -169187900) [ 1.568527] registered taskstats version 1 [ 1.569294] Loading compiled-in X.509 certificates [ 1.570821] Key type .fscrypt registered [ 1.571578] Key type fscrypt-provisioning registered [ 1.581084] Btrfs loaded, zoned=no, fsverity=no [ 1.582422] Key type encrypted registered [ 1.583226] printk: legacy console [netcon0] enabled [ 1.584087] netconsole: network logging started [ 1.726087] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.771900] ata1: SATA link down (SStatus 0 SControl 300) [ 1.779881] ata6: SATA link down (SStatus 0 SControl 300) [ 1.781195] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.782805] ata4: SATA link down (SStatus 0 SControl 300) [ 1.784186] ata5: SATA link down (SStatus 0 SControl 300) [ 1.785449] ata2: SATA link down (SStatus 0 SControl 300) [ 1.786677] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.787924] ata3.00: applying bridge limits [ 1.788995] ata3.00: configured for UDMA/100 [ 1.790280] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.820245] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.821467] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.843092] IP-Config: Complete: [ 1.843882] device=eth0, hwaddr=52:54:00:12:34:1c, ipaddr=192.168.7.28, mask=255.255.255.0, gw=192.168.7.27 [ 1.846168] host=192.168.7.28, domain=, nis-domain=(none) [ 1.847433] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.847436] nameserver0=8.8.8.8 [ 1.849999] clk: Disabling unused clocks [ 1.851273] md: Waiting for all devices to be available before autodetect [ 1.852497] md: If you don't use raid, use raid=noautodetect [ 1.853538] md: Autodetecting RAID arrays. [ 1.854310] md: autorun ... [ 1.854847] md: ... autorun DONE. [ 1.858473] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.861270] EXT4-fs (vda): mounted filesystem e34e30f4-4fb0-4e34-8351-eff480ccba39 r/w with ordered data mode. Quota mode: disabled. [ 1.861304] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.863224] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.866031] devtmpfs: mounted [ 1.867436] Freeing unused kernel image (initmem) memory: 3488K [ 1.868587] Write protecting the kernel read-only data: 26624k [ 1.869834] Freeing unused kernel image (rodata/data gap) memory: 356K [ 1.871065] Run /sbin/init as init process INIT: version 3.13 booting Starting udev [ 1.922912] udevd[137]: starting version 3.2.14 [ 1.926232] udevd[138]: starting eudev-3.2.14 [ 1.977070] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.108437] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.161470] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.220241] EXT4-fs (vda): re-mounted e34e30f4-4fb0-4e34-8351-eff480ccba39 r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0 qemux86-64 login: