PU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: linux,dummy-virt
[    0.000000] random: crng init done
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s40724 r8192 d20716 u69632
[    0.000000] Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 497544K/524288K available (10240K kernel code, 1430K rwdata, 2772K rodata, 2048K init, 366K bss, 26744K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 42100 entries in 124 pages
[    0.000000] ftrace: allocated 124 pages with 5 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000119] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
[    0.000246] Switching to timer-based delay loop, resolution 16ns
[    0.015776] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.021603] Console: colour dummy device 80x30
[    0.022582] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.022747] CPU: Testing write buffer coherency: ok
[    0.026667] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.026810] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.026886] pid_max: default: 32768 minimum: 301
[    0.027944] LSM: initializing lsm=capability,landlock,integrity
[    0.028327] landlock: Up and running.
[    0.030552] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.030593] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.062686] /cpus/cpu@0 missing clock-frequency property
[    0.062975] /cpus/cpu@1 missing clock-frequency property
[    0.063007] /cpus/cpu@2 missing clock-frequency property
[    0.063037] /cpus/cpu@3 missing clock-frequency property
[    0.063145] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.072267] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.072830] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.073029] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.073746] Setting up static identity map for 0x40200000 - 0x40200060
[    0.074553] rcu: Hierarchical SRCU implementation.
[    0.074586] rcu: 	Max phase no-delay instances is 1000.
[    0.078530] smp: Bringing up secondary CPUs ...
[    0.092302] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.092394] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.097589] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.097694] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.099869] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.099916] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.100422] smp: Brought up 1 node, 4 CPUs
[    0.100505] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.100561] CPU: All CPU(s) started in SVC mode.
[    0.311064] devtmpfs: initialized
[    0.324826] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.348295] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.357739] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.373552] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.377074] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.384124] cpuidle: using governor ladder
[    0.386548] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.386621] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.390550] Serial: AMBA PL011 UART driver
[    0.416818] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.417914] printk: console [ttyAMA0] enabled
[    0.452674] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.481824] cryptd: max_cpu_qlen set to 1000
[    0.651180] raid6: neonx8   gen()   504 MB/s
[    0.822790] raid6: neonx4   gen()  2452 MB/s
[    0.993869] raid6: neonx2   gen()  2079 MB/s
[    1.165474] raid6: neonx1   gen()  1150 MB/s
[    1.337582] raid6: int32x8  gen()   238 MB/s
[    1.508618] raid6: int32x4  gen()   246 MB/s
[    1.679489] raid6: int32x2  gen()   754 MB/s
[    1.850443] raid6: int32x1  gen()   789 MB/s
[    1.850878] raid6: using algorithm neonx4 gen() 2452 MB/s
[    2.022745] raid6: .... xor() 1090 MB/s, rmw enabled
[    2.023254] raid6: using neon recovery algorithm
[    2.026346] SCSI subsystem initialized
[    2.027282] usbcore: registered new interface driver usbfs
[    2.027792] usbcore: registered new interface driver hub
[    2.028253] usbcore: registered new device driver usb
[    2.028748] pps_core: LinuxPPS API ver. 1 registered
[    2.028882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.029157] PTP clock support registered
[    2.043090] vgaarb: loaded
[    2.047209] clocksource: Switched to clocksource arch_sys_counter
[    2.078637] NET: Registered PF_INET protocol family
[    2.080315] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.086877] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.087508] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.088033] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    2.088620] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.089174] TCP: Hash tables configured (established 4096 bind 4096)
[    2.090328] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.090657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.092088] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.094941] RPC: Registered named UNIX socket transport module.
[    2.095136] RPC: Registered udp transport module.
[    2.095246] RPC: Registered tcp transport module.
[    2.095351] RPC: Registered tcp-with-tls transport module.
[    2.095482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.107174] PCI: CLS 0 bytes, default 64
[    2.112871] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    2.117637] NFS: Registering the id_resolver key type
[    2.118916] Key type id_resolver registered
[    2.119211] Key type id_legacy registered
[    2.132932] Key type cifs.idmap registered
[    2.275116] xor: measuring software checksum speed
[    2.278198]    arm4regs        :  1351 MB/sec
[    2.280469]    8regs           :  1689 MB/sec
[    2.282695]    32regs          :  1712 MB/sec
[    2.285193]    neon            :  1495 MB/sec
[    2.285513] xor: using function: 32regs (1712 MB/sec)
[    2.286889] async_tx: api initialized (async)
[    2.288066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.288716] io scheduler mq-deadline registered
[    2.289079] io scheduler kyber registered
[    2.292025] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.293163] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.294115] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.295361] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.298105] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.298637] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.298807] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.298960] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.300214] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    2.310509] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    2.310893] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    2.311064] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.311241] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.311953] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    2.312140] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    2.312975] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    2.313156] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.313325] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.314647] PCI: bus0: Fast back to back transfers disabled
[    2.316116] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    2.317020] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    2.317578] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    2.318137] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    2.318562] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    2.318977] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    2.320641] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.327530] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.330438] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.412346] printk: console [hvc0] enabled
[    2.413069] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.443876] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.443926] [drm] features: -context_init
[    2.446232] [drm] number of scanouts: 1
[    2.446779] [drm] number of cap sets: 0
[    2.456220] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    2.654529] Console: switching to colour frame buffer device 160x50
[    2.659945] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.694943] brd: module loaded
[    2.695981] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.701317] virtio_blk virtio1: [vda] 883370 512-byte logical blocks (452 MB/431 MiB)
[    2.719417] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.720331] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.723748] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.728113] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.729022] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.729782] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.736472] hub 1-0:1.0: USB hub found
[    2.737666] hub 1-0:1.0: 4 ports detected
[    2.743149] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.756092] hub 2-0:1.0: USB hub found
[    2.757029] hub 2-0:1.0: 4 ports detected
[    2.764587] rtc-pl031 9010000.pl031: registered as rtc0
[    2.765833] rtc-pl031 9010000.pl031: setting system clock to 2025-02-27T21:33:05 UTC (1740691985)
[    2.769538] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.772823] usbcore: registered new interface driver usbhid
[    2.773409] usbhid: USB HID core driver
[    2.774232] u32 classifier
[    2.774531]     input device check on
[    2.774932]     Actions configured
[    2.777922] NET: Registered PF_INET6 protocol family
[    2.785503] Segment Routing with IPv6
[    2.786209] In-situ OAM (IOAM) with IPv6
[    2.787498] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.790562] NET: Registered PF_PACKET protocol family
[    2.791651] Bridge firewalling registered
[    2.792834] Key type dns_resolver registered
[    2.793953] NET: Registered PF_VSOCK protocol family
[    2.795406] Registering SWP/SWPB emulation handler
[    2.813383] registered taskstats version 1
[    2.834116] Key type .fscrypt registered
[    2.834598] Key type fscrypt-provisioning registered
[    2.850241] Btrfs loaded, zoned=no, fsverity=no
[    2.888489] Key type encrypted registered
[    2.890753] printk: console [netcon0] enabled
[    2.891243] netconsole: network logging started
[    2.962964] IP-Config: Complete:
[    2.963367]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.964348]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.964843]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.964879]      nameserver0=8.8.8.8
[    2.968163] clk: Disabling unused clocks
[    2.971950] md: Waiting for all devices to be available before autodetect
[    2.972563] md: If you don't use raid, use raid=noautodetect
[    2.973144] md: Autodetecting RAID arrays.
[    2.973586] md: autorun ...
[    2.973913] md: ... autorun DONE.
[    3.032328] EXT4-fs (vda): mounted filesystem 6ef9dfb1-d8b3-480e-9b62-92da8bc7b6d2 r/w with ordered data mode. Quota mode: disabled.
[    3.034698] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.040942] devtmpfs: mounted
[    3.102016] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.197353] Freeing unused kernel image (initmem) memory: 2048K
[    3.271501] Run /sbin/init as init process
[    3.323544] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.327007] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
INIT: version 3.04 booting
[    3.483441] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.712360] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.787695] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    5.197171] udevd[131]: starting version 3.2.14
[    5.425334] udevd[132]: starting eudev-3.2.14
[    9.408398] EXT4-fs (vda): re-mounted 6ef9dfb1-d8b3-480e-9b62-92da8bc7b6d2 r/w. Quota mode: disabled.
[   10.056293] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: dropbear.

X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.6.75-yocto-standard #1 SMP PREEMPT Fri Feb  7 21:37:44 UTC 2025 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 27 21:33:24 2025
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86CameraAccessEnable
> Warning:          Could not resolve keysym XF86CameraAccessDisable
> Warning:          Could not resolve keysym XF86CameraAccessToggle
> Warning:          Could not resolve keysym XF86NextElement
> Warning:          Could not resolve keysym XF86PreviousElement
> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
> Warning:          Could not resolve keysym XF86MarkWaypoint
> Warning:          Could not resolve keysym XF86Sos
> Warning:          Could not resolve keysym XF86NavChart
> Warning:          Could not resolve keysym XF86FishingChart
> Warning:          Could not resolve keysym XF86SingleRangeRadar
> Warning:          Could not resolve keysym XF86DualRangeRadar
> Warning:          Could not resolve keysym XF86RadarOverlay
> Warning:          Could not resolve keysym XF86TraditionalSonar
> Warning:          Could not resolve keysym XF86ClearvuSonar
> Warning:          Could not resolve keysym XF86SidevuSonar
> Warning:          Could not resolve keysym XF86NavInfo
Errors from xkbcomp are not fatal to the X server
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.0.7 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-q1YDI5ts6w,guid=5d144563b9c326a44bfc100267c0da27
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[562]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=543 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[562]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:578): Gtk-[1;33mWARNING[0m **: [34m21:33:32.641[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:578): [1;33mWARNING[0m **: [34m21:33:32.650[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
