[ 0.000000] Linux version 6.12.13-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Feb 10 00:32:31 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1162226236 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.996 MHz processor [ 0.000878] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000904] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000907] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000946] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003172] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.006097] ACPI: Early table checksum verification disabled [ 0.006101] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.006107] ACPI: RSDT 0x000000007FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006112] ACPI: FACP 0x000000007FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006117] ACPI: DSDT 0x000000007FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006120] ACPI: FACS 0x000000007FFE0000 000040 [ 0.006121] ACPI: APIC 0x000000007FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006123] ACPI: HPET 0x000000007FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006124] ACPI: MCFG 0x000000007FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006126] ACPI: WAET 0x000000007FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006127] ACPI: Reserving FACP table memory at [mem 0x7ffe2217-0x7ffe230a] [ 0.006128] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2216] [ 0.006129] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.006129] ACPI: Reserving APIC table memory at [mem 0x7ffe230b-0x7ffe239a] [ 0.006130] ACPI: Reserving HPET table memory at [mem 0x7ffe239b-0x7ffe23d2] [ 0.006130] ACPI: Reserving MCFG table memory at [mem 0x7ffe23d3-0x7ffe240e] [ 0.006131] ACPI: Reserving WAET table memory at [mem 0x7ffe240f-0x7ffe2436] [ 0.006191] Zone ranges: [ 0.006191] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006193] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006194] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.006195] Movable zone start for each node [ 0.006195] Early memory node ranges [ 0.006196] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.006197] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.006198] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.006199] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.008938] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009172] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.952416] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.953898] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.954238] ACPI: PM-Timer IO Port: 0x608 [ 0.954250] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.954279] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.954281] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.954283] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.954284] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.954285] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.954286] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.954288] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.954289] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.954294] TSC deadline timer available [ 0.954300] CPU topo: Max. logical packages: 1 [ 0.954300] CPU topo: Max. logical dies: 1 [ 0.954301] CPU topo: Max. dies per package: 1 [ 0.954304] CPU topo: Max. threads per core: 1 [ 0.954305] CPU topo: Num. cores per package: 4 [ 0.954305] CPU topo: Num. threads per package: 4 [ 0.954305] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.954323] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.954344] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.954346] Booting paravirtualized kernel on KVM [ 0.954348] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.954359] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.960200] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288 [ 0.960228] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.960298] random: crng init done [ 0.984434] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.248550] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.248617] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 1.255442] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 1.255448] software IO TLB: area num 4. [ 1.255449] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 1.265679] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.265783] ftrace: allocating 53692 entries in 210 pages [ 1.277840] ftrace: allocated 210 pages with 4 groups [ 1.278184] Dynamic Preempt: full [ 1.284585] rcu: Preemptible hierarchical RCU implementation. [ 1.284586] rcu: RCU event tracing is enabled. [ 1.284586] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 1.284588] All grace periods are expedited (rcu_expedited). [ 1.284589] Trampoline variant of Tasks RCU enabled. [ 1.284589] Rude variant of Tasks RCU enabled. [ 1.284590] Tracing variant of Tasks RCU enabled. [ 1.284590] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.284591] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 1.284598] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.284600] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.284601] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.295580] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 1.295825] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 1.295916] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 1.300111] Console: colour VGA+ 80x25 [ 1.300151] printk: legacy console [ttyS0] enabled [ 1.422420] ACPI: Core revision 20240827 [ 1.423564] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.425061] APIC: Switch to symmetric I/O mode setup [ 1.425953] x2apic enabled [ 1.426633] APIC: Switched APIC routing to: physical x2apic [ 1.428394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.429328] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns [ 1.430917] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996) [ 1.432027] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.432918] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.433919] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.434916] Spectre V2 : Mitigation: Retpolines [ 1.434918] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.435917] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.436916] Speculative Store Bypass: Vulnerable [ 1.437926] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.438916] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.439917] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.440918] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.441917] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.461958] Freeing SMP alternatives memory: 56K [ 1.462688] pid_max: default: 32768 minimum: 301 [ 1.462934] LSM: initializing lsm=capability,landlock [ 1.463944] landlock: Up and running. [ 1.465048] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.466028] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.468111] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.469317] Performance Events: AMD PMU driver. [ 1.469922] ... version: 0 [ 1.470556] ... bit width: 48 [ 1.470919] ... generic registers: 4 [ 1.471526] ... value mask: 0000ffffffffffff [ 1.471919] ... max period: 00007fffffffffff [ 1.472758] ... fixed-purpose events: 0 [ 1.472919] ... event mask: 000000000000000f [ 1.473878] signal: max sigframe size: 1776 [ 1.473986] rcu: Hierarchical SRCU implementation. [ 1.474741] rcu: Max phase no-delay instances is 400. [ 1.474994] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.476171] smp: Bringing up secondary CPUs ... [ 1.477022] smpboot: x86: Booting SMP configuration: [ 1.477862] .... node #0, CPUs: #1 #2 #3 [ 1.517919] smp: Brought up 1 node, 4 CPUs [ 1.518921] smpboot: Total of 4 processors activated (21999.96 BogoMIPS) [ 1.520277] Memory: 5082068K/5221848K available (20480K kernel code, 2433K rwdata, 5788K rodata, 3488K init, 2076K bss, 134056K reserved, 0K cma-reserved) [ 1.521925] devtmpfs: initialized [ 1.522674] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.522922] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.524091] pinctrl core: initialized pinctrl subsystem [ 1.528040] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.529093] thermal_sys: Registered thermal governor 'step_wise' [ 1.529095] thermal_sys: Registered thermal governor 'user_space' [ 1.529940] cpuidle: using governor menu [ 1.532001] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.532922] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.533929] PCI: Using configuration type 1 for base access [ 1.534940] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.561126] raid6: sse2x4 gen() 9868 MB/s [ 1.579057] raid6: sse2x2 gen() 11334 MB/s [ 1.597177] raid6: sse2x1 gen() 5611 MB/s [ 1.598924] raid6: using algorithm sse2x2 gen() 11334 MB/s [ 1.617843] raid6: .... xor() 7223 MB/s, rmw enabled [ 1.619936] raid6: using ssse3x2 recovery algorithm [ 1.622240] ACPI: Added _OSI(Module Device) [ 1.623925] ACPI: Added _OSI(Processor Device) [ 1.624924] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.626923] ACPI: Added _OSI(Processor Aggregator Device) [ 1.630412] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.636070] ACPI: Interpreter enabled [ 1.640944] ACPI: PM: (supports S0 S3 S5) [ 1.641924] ACPI: Using IOAPIC for interrupt routing [ 1.643957] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.647925] PCI: Using E820 reservations for host bridge windows [ 1.650027] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.655086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.657931] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.660980] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.663989] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.666451] PCI host bridge to bus 0000:00 [ 1.667930] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.672929] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.675935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.678929] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.681926] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.684925] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.688926] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.691016] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.695262] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.708926] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.717930] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.727924] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.733628] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.743213] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.746924] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.753573] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.764926] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.774097] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.787046] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.798044] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.806009] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.814956] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.817330] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.822578] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.827898] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.833824] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.842925] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.848047] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.854303] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.856972] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.863924] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.867582] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.873715] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.877454] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.880454] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.887230] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.890606] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.893299] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.901349] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.904926] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.907659] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.910138] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.912014] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.912981] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.914969] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.915965] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.916964] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.918982] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.921980] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.924007] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.926994] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.927933] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.929940] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.931934] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.933941] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.935941] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.937947] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.939932] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.942978] iommu: Default domain type: Translated [ 1.944927] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.947892] SCSI subsystem initialized [ 1.950059] ACPI: bus type USB registered [ 1.954701] usbcore: registered new interface driver usbfs [ 1.956970] usbcore: registered new interface driver hub [ 1.958956] usbcore: registered new device driver usb [ 1.961004] pps_core: LinuxPPS API ver. 1 registered [ 1.962927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.966931] PTP clock support registered [ 1.970186] Bluetooth: Core ver 2.22 [ 1.971969] NET: Registered PF_BLUETOOTH protocol family [ 1.973924] Bluetooth: HCI device and connection manager initialized [ 1.976934] Bluetooth: HCI socket layer initialized [ 1.978403] Bluetooth: L2CAP socket layer initialized [ 1.980941] Bluetooth: SCO socket layer initialized [ 2.060099] PCI: Using ACPI for IRQ routing [ 2.196119] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 2.196916] pci 0000:00:03.0: vgaarb: bridge control possible [ 2.196916] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.202928] vgaarb: loaded [ 2.205251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.206922] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 2.214112] clocksource: Switched to clocksource kvm-clock [ 2.230902] pnp: PnP ACPI init [ 2.232240] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 2.235622] pnp: PnP ACPI: found 5 devices [ 2.248948] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.252005] NET: Registered PF_INET protocol family [ 2.256722] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.262999] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.267329] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.270005] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.278299] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 2.289016] TCP: Hash tables configured (established 65536 bind 65536) [ 2.291567] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.295323] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.298250] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.301397] RPC: Registered named UNIX socket transport module. [ 2.303520] RPC: Registered udp transport module. [ 2.305148] RPC: Registered tcp transport module. [ 2.306746] RPC: Registered tcp-with-tls transport module. [ 2.308585] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.310908] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.313126] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.315559] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.318082] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 2.320661] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 2.323231] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 2.327267] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 2.330179] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 2.333059] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 2.336447] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 2.339815] PCI: CLS 0 bytes, default 64 [ 2.341676] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.344471] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 2.347537] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns [ 2.361164] Initialise system trusted keyrings [ 2.363014] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.365815] NFS: Registering the id_resolver key type [ 2.368061] Key type id_resolver registered [ 2.369744] Key type id_legacy registered [ 2.372865] Key type cifs.idmap registered [ 2.391181] xor: automatically using best checksumming function avx [ 2.392827] Key type asymmetric registered [ 2.393707] Asymmetric key parser 'x509' registered [ 2.394823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.396328] io scheduler mq-deadline registered [ 2.397285] io scheduler kyber registered [ 2.398152] io scheduler bfq registered [ 2.399390] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.402287] ACPI: button: Power Button [PWRF] [ 2.406965] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 2.411383] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 2.415738] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 2.430054] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 2.434852] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.437452] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.440762] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.450038] Linux agpgart interface v0.103 [ 2.451573] ACPI: bus type drm_connector registered [ 2.454752] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 2.455896] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 2.460262] Console: switching to colour dummy device 80x25 [ 2.462932] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.462934] [drm] features: -context_init [ 2.468279] [drm] number of scanouts: 1 [ 2.469914] [drm] number of cap sets: 0 [ 2.472040] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.524123] fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.557612] Console: switching to colour frame buffer device 160x50 [ 2.588714] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.604841] brd: module loaded [ 2.619252] loop: module loaded [ 2.621150] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.628149] virtio_blk virtio3: [vda] 1015848 512-byte logical blocks (520 MB/496 MiB) [ 2.634842] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.636430] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.637665] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.719609] scsi host0: ahci [ 2.720468] scsi host1: ahci [ 2.721303] scsi host2: ahci [ 2.722103] scsi host3: ahci [ 2.723002] scsi host4: ahci [ 2.723989] scsi host5: ahci [ 2.724792] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.726600] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.728378] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.730125] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.731863] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.733645] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.744513] e100: Intel(R) PRO/100 Network Driver [ 2.745416] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.748978] e1000: Intel(R) PRO/1000 Network Driver [ 2.749769] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.750733] e1000e: Intel(R) PRO/1000 Network Driver [ 2.751544] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.752559] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.753441] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.755450] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.756802] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.764542] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.771126] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.772385] hub 1-0:1.0: USB hub found [ 2.773002] hub 1-0:1.0: 6 ports detected [ 2.773836] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.774673] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.775967] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.777713] hub 2-0:1.0: USB hub found [ 2.778354] hub 2-0:1.0: 2 ports detected [ 2.779502] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.780424] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.781930] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.784834] hub 3-0:1.0: USB hub found [ 2.785467] hub 3-0:1.0: 2 ports detected [ 2.786769] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.787646] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.789305] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.790444] hub 4-0:1.0: USB hub found [ 2.791113] hub 4-0:1.0: 2 ports detected [ 2.792287] usbcore: registered new interface driver usb-storage [ 2.793342] usbcore: registered new interface driver usbserial_generic [ 2.794510] usbserial: USB Serial support registered for generic [ 2.795671] usbcore: registered new interface driver ftdi_sio [ 2.796824] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.798028] usbcore: registered new interface driver pl2303 [ 2.798947] usbserial: USB Serial support registered for pl2303 [ 2.799940] i8042: PNP: No PS/2 controller found. [ 2.801058] mousedev: PS/2 mouse device common for all mice [ 2.802556] rtc_cmos 00:03: RTC can wake from S4 [ 2.804117] rtc_cmos 00:03: registered as rtc0 [ 2.804911] rtc_cmos 00:03: setting system clock to 2025-03-11T14:28:16 UTC (1741703296) [ 2.806637] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.808351] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.808434] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.809492] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.811172] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.815846] sdhci: Secure Digital Host Controller Interface driver [ 2.816829] sdhci: Copyright(c) Pierre Ossman [ 2.817514] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.950735] usbcore: registered new interface driver usbhid [ 2.957380] usbhid: USB HID core driver [ 2.958118] u32 classifier [ 2.958559] input device check on [ 2.959209] Actions configured [ 2.959959] NET: Registered PF_INET6 protocol family [ 2.961447] Segment Routing with IPv6 [ 2.962076] In-situ OAM (IOAM) with IPv6 [ 2.962696] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.963795] NET: Registered PF_PACKET protocol family [ 2.964693] Bridge firewalling registered [ 2.965370] l2tp_core: L2TP core driver, V2.0 [ 2.966337] Key type dns_resolver registered [ 2.967117] NET: Registered PF_VSOCK protocol family [ 2.968927] IPI shorthand broadcast: enabled [ 2.970802] sched_clock: Marking stable (2838003979, 132085987)->(3066428415, -96338449) [ 2.972442] registered taskstats version 1 [ 2.973188] Loading compiled-in X.509 certificates [ 2.975532] Key type .fscrypt registered [ 2.976174] Key type fscrypt-provisioning registered [ 2.977748] Btrfs loaded, zoned=no, fsverity=no [ 2.982080] Key type encrypted registered [ 2.983052] printk: legacy console [netcon0] enabled [ 2.983919] netconsole: network logging started [ 3.011158] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.048381] ata6: SATA link down (SStatus 0 SControl 300) [ 3.050855] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.053462] ata1: SATA link down (SStatus 0 SControl 300) [ 3.055801] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.057935] ata3.00: applying bridge limits [ 3.059717] ata4: SATA link down (SStatus 0 SControl 300) [ 3.062294] ata5: SATA link down (SStatus 0 SControl 300) [ 3.064596] ata3.00: configured for UDMA/100 [ 3.065679] ata2: SATA link down (SStatus 0 SControl 300) [ 3.068566] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.098635] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.101507] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.126169] IP-Config: Complete: [ 3.128166] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 3.132538] host=192.168.7.16, domain=, nis-domain=(none) [ 3.134964] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.134968] nameserver0=8.8.8.8 [ 3.140345] clk: Disabling unused clocks [ 3.143508] md: Waiting for all devices to be available before autodetect [ 3.146552] md: If you don't use raid, use raid=noautodetect [ 3.152487] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 3.156718] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 3.160457] md: Autodetecting RAID arrays. [ 3.162435] md: autorun ... [ 3.163680] md: ... autorun DONE. [ 3.175131] EXT4-fs (vda): mounted filesystem 38409436-59f8-4aa7-9b81-a050edd7fc0d r/w with ordered data mode. Quota mode: disabled. [ 3.179372] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.181815] devtmpfs: mounted [ 3.187468] Freeing unused kernel image (initmem) memory: 3488K [ 3.189476] Write protecting the kernel read-only data: 26624k [ 3.192181] Freeing unused kernel image (rodata/data gap) memory: 356K [ 3.194553] Run /sbin/init as init process INIT: version 3.13 booting [ 3.281131] usb 1-2: new high-speed USB device number 3 using ehci-pci Starting udev [ 3.335683] udevd[137]: starting version 3.2.14 [ 3.344445] udevd[138]: starting eudev-3.2.14 [ 3.496244] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 3.549471] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 3.615073] EXT4-fs (vda): re-mounted 38409436-59f8-4aa7-9b81-a050edd7fc0d r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0 qemux86-64 login: