[ 0.000000] Linux version 6.12.13-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Feb 10 00:32:31 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 833618723 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.998 MHz processor [ 0.000874] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000899] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000901] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000940] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002798] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.010041] ACPI: Early table checksum verification disabled [ 0.010044] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.010050] ACPI: RSDT 0x000000007FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010055] ACPI: FACP 0x000000007FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010061] ACPI: DSDT 0x000000007FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010063] ACPI: FACS 0x000000007FFE0000 000040 [ 0.010064] ACPI: APIC 0x000000007FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010066] ACPI: HPET 0x000000007FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010067] ACPI: MCFG 0x000000007FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010069] ACPI: WAET 0x000000007FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010070] ACPI: Reserving FACP table memory at [mem 0x7ffe2217-0x7ffe230a] [ 0.010071] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2216] [ 0.010071] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.010072] ACPI: Reserving APIC table memory at [mem 0x7ffe230b-0x7ffe239a] [ 0.010072] ACPI: Reserving HPET table memory at [mem 0x7ffe239b-0x7ffe23d2] [ 0.010073] ACPI: Reserving MCFG table memory at [mem 0x7ffe23d3-0x7ffe240e] [ 0.010073] ACPI: Reserving WAET table memory at [mem 0x7ffe240f-0x7ffe2436] [ 0.010149] Zone ranges: [ 0.010149] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010150] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010151] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.010152] Movable zone start for each node [ 0.010153] Early memory node ranges [ 0.010153] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010154] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.010155] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.010156] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.014546] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014850] On node 0, zone DMA: 97 pages in unavailable ranges [ 1.148212] On node 0, zone Normal: 40 pages in unavailable ranges [ 1.148511] On node 0, zone Normal: 5120 pages in unavailable ranges [ 1.148846] ACPI: PM-Timer IO Port: 0x608 [ 1.148858] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 1.148883] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 1.148885] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.148887] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 1.148888] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.148889] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 1.148890] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 1.148892] ACPI: Using ACPI (MADT) for SMP configuration information [ 1.148893] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 1.148897] TSC deadline timer available [ 1.148901] CPU topo: Max. logical packages: 1 [ 1.148902] CPU topo: Max. logical dies: 1 [ 1.148902] CPU topo: Max. dies per package: 1 [ 1.148905] CPU topo: Max. threads per core: 1 [ 1.148906] CPU topo: Num. cores per package: 4 [ 1.148906] CPU topo: Num. threads per package: 4 [ 1.148907] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 1.148922] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 1.148938] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 1.148940] Booting paravirtualized kernel on KVM [ 1.148942] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.149211] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 1.156156] percpu: Embedded 58 pages/cpu s199640 r8192 d29736 u524288 [ 1.156184] Kernel command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 1.156247] random: crng init done [ 1.186106] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.222563] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.222629] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 1.230160] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 1.230163] software IO TLB: area num 4. [ 1.230164] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 1.240251] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.240354] ftrace: allocating 53692 entries in 210 pages [ 1.251029] ftrace: allocated 210 pages with 4 groups [ 1.251337] Dynamic Preempt: full [ 1.254506] rcu: Preemptible hierarchical RCU implementation. [ 1.254507] rcu: RCU event tracing is enabled. [ 1.254508] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 1.254509] All grace periods are expedited (rcu_expedited). [ 1.254510] Trampoline variant of Tasks RCU enabled. [ 1.254510] Rude variant of Tasks RCU enabled. [ 1.254511] Tracing variant of Tasks RCU enabled. [ 1.254511] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.254512] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 1.254517] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.254519] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.254520] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.263630] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 1.263864] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 1.263943] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 1.268003] Console: colour VGA+ 80x25 [ 1.268039] printk: legacy console [ttyS0] enabled [ 1.384513] ACPI: Core revision 20240827 [ 1.385645] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.387096] APIC: Switch to symmetric I/O mode setup [ 1.387976] x2apic enabled [ 1.388664] APIC: Switched APIC routing to: physical x2apic [ 1.390464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.391415] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.393047] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 1.394187] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.395048] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.396050] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.397049] Spectre V2 : Mitigation: Retpolines [ 1.398047] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.399047] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.400048] Speculative Store Bypass: Vulnerable [ 1.401059] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.402047] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.403047] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.404048] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.405048] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.425569] Freeing SMP alternatives memory: 56K [ 1.426051] pid_max: default: 32768 minimum: 301 [ 1.427060] LSM: initializing lsm=capability,landlock [ 1.427866] landlock: Up and running. [ 1.428246] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.430078] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.431604] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.436194] Performance Events: AMD PMU driver. [ 1.437054] ... version: 0 [ 1.437686] ... bit width: 48 [ 1.438049] ... generic registers: 4 [ 1.438682] ... value mask: 0000ffffffffffff [ 1.439050] ... max period: 00007fffffffffff [ 1.439861] ... fixed-purpose events: 0 [ 1.440049] ... event mask: 000000000000000f [ 1.441081] signal: max sigframe size: 1776 [ 1.441795] rcu: Hierarchical SRCU implementation. [ 1.442050] rcu: Max phase no-delay instances is 400. [ 1.442973] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.443279] smp: Bringing up secondary CPUs ... [ 1.444210] smpboot: x86: Booting SMP configuration: [ 1.445004] .... node #0, CPUs: #1 #2 #3 [ 1.483129] smp: Brought up 1 node, 4 CPUs [ 1.484722] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 1.485401] Memory: 5081816K/5221848K available (20480K kernel code, 2433K rwdata, 5788K rodata, 3488K init, 2076K bss, 134056K reserved, 0K cma-reserved) [ 1.487050] devtmpfs: initialized [ 1.488154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.489053] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.491134] pinctrl core: initialized pinctrl subsystem [ 1.494801] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.495184] thermal_sys: Registered thermal governor 'step_wise' [ 1.495186] thermal_sys: Registered thermal governor 'user_space' [ 1.496060] cpuidle: using governor menu [ 1.497469] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.498052] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.499057] PCI: Using configuration type 1 for base access [ 1.499994] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.524050] raid6: sse2x4 gen() 26200 MB/s [ 1.541057] raid6: sse2x2 gen() 26772 MB/s [ 1.558049] raid6: sse2x1 gen() 7042 MB/s [ 1.558748] raid6: using algorithm sse2x2 gen() 26772 MB/s [ 1.576049] raid6: .... xor() 18869 MB/s, rmw enabled [ 1.576873] raid6: using ssse3x2 recovery algorithm [ 1.577414] ACPI: Added _OSI(Module Device) [ 1.578050] ACPI: Added _OSI(Processor Device) [ 1.578788] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.579049] ACPI: Added _OSI(Processor Aggregator Device) [ 1.580480] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.582124] ACPI: Interpreter enabled [ 1.582712] ACPI: PM: (supports S0 S3 S5) [ 1.583051] ACPI: Using IOAPIC for interrupt routing [ 1.583855] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.584051] PCI: Using E820 reservations for host bridge windows [ 1.585035] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.586628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.587054] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.588073] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.589075] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.590381] PCI host bridge to bus 0000:00 [ 1.591024] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.591050] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.592049] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.593050] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.594049] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.595049] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.596049] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.596957] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.597782] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.599050] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.601035] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.604051] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.606050] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.608101] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.610050] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.611440] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.616464] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.618441] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.621101] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.625096] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.627518] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.630624] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.631237] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.633704] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.635057] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.636551] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.641605] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.644725] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.646166] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.647655] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.649515] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.651698] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.654391] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.655683] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.656380] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.658939] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.659410] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.660247] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.663700] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.664633] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.665850] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.669147] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.670828] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.671100] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.672095] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.673078] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.674093] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.675080] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.676066] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.677055] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.678071] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.679015] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.679069] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.680052] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.681016] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.681053] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.681995] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.682054] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.683515] iommu: Default domain type: Translated [ 1.684051] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.685402] SCSI subsystem initialized [ 1.686116] ACPI: bus type USB registered [ 1.687080] usbcore: registered new interface driver usbfs [ 1.687949] usbcore: registered new interface driver hub [ 1.688056] usbcore: registered new device driver usb [ 1.688898] pps_core: LinuxPPS API ver. 1 registered [ 1.689050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.690051] PTP clock support registered [ 1.691530] Bluetooth: Core ver 2.22 [ 1.692066] NET: Registered PF_BLUETOOTH protocol family [ 1.692899] Bluetooth: HCI device and connection manager initialized [ 1.693055] Bluetooth: HCI socket layer initialized [ 1.693817] Bluetooth: L2CAP socket layer initialized [ 1.694058] Bluetooth: SCO socket layer initialized [ 1.695282] PCI: Using ACPI for IRQ routing [ 1.741565] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.742045] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.742046] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.742052] vgaarb: loaded [ 1.742657] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.743049] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.747377] clocksource: Switched to clocksource kvm-clock [ 1.822959] pnp: PnP ACPI init [ 1.823673] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.827761] pnp: PnP ACPI: found 5 devices [ 1.838352] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.839828] NET: Registered PF_INET protocol family [ 1.844025] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.846330] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.847796] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.849055] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.857072] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.867207] TCP: Hash tables configured (established 65536 bind 65536) [ 1.868405] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.869619] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.915047] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.916504] RPC: Registered named UNIX socket transport module. [ 1.917484] RPC: Registered udp transport module. [ 1.918265] RPC: Registered tcp transport module. [ 1.919942] RPC: Registered tcp-with-tls transport module. [ 1.920817] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.921870] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.922879] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.923861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.924980] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.926087] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.927197] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.929029] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.930305] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.931709] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.932912] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.934234] PCI: CLS 0 bytes, default 64 [ 1.934911] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.936001] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.937279] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.940764] Initialise system trusted keyrings [ 1.941752] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.943579] NFS: Registering the id_resolver key type [ 1.944412] Key type id_resolver registered [ 1.945081] Key type id_legacy registered [ 1.947159] Key type cifs.idmap registered [ 1.955045] xor: automatically using best checksumming function avx [ 1.956196] Key type asymmetric registered [ 1.956841] Asymmetric key parser 'x509' registered [ 1.958201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.959403] io scheduler mq-deadline registered [ 1.960137] io scheduler kyber registered [ 1.960786] io scheduler bfq registered [ 1.961965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.964295] ACPI: button: Power Button [PWRF] [ 1.967905] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.972276] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.976853] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.988309] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.992553] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.995470] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.999316] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.005993] Linux agpgart interface v0.103 [ 2.007773] ACPI: bus type drm_connector registered [ 2.009427] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 2.012393] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 2.018613] Console: switching to colour dummy device 80x25 [ 2.021721] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.021725] [drm] features: -context_init [ 2.026542] [drm] number of scanouts: 1 [ 2.027921] [drm] number of cap sets: 0 [ 2.031978] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.051972] fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.090567] Console: switching to colour frame buffer device 160x50 [ 2.135636] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.145507] brd: module loaded [ 2.207335] loop: module loaded [ 2.208086] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.210588] virtio_blk virtio3: [vda] 1016160 512-byte logical blocks (520 MB/496 MiB) [ 2.215296] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.216576] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.217579] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.220551] scsi host0: ahci [ 2.221384] scsi host1: ahci [ 2.222349] scsi host2: ahci [ 2.223234] scsi host3: ahci [ 2.226191] scsi host4: ahci [ 2.227486] scsi host5: ahci [ 2.228050] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.229397] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.230737] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.232127] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.233665] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.235105] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.238697] e100: Intel(R) PRO/100 Network Driver [ 2.239784] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.240685] e1000: Intel(R) PRO/1000 Network Driver [ 2.241451] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.242387] e1000e: Intel(R) PRO/1000 Network Driver [ 2.243204] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.244169] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.245036] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.247242] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.248982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.250268] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.254361] hub 1-0:1.0: USB hub found [ 2.270162] hub 1-0:1.0: 2 ports detected [ 2.271565] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.273225] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.276683] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.284235] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.286967] hub 2-0:1.0: USB hub found [ 2.288522] hub 2-0:1.0: 6 ports detected [ 2.311357] hub 1-0:1.0: USB hub found [ 2.313017] hub 1-0:1.0: 2 ports detected [ 2.314790] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.316208] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.317784] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.319292] hub 3-0:1.0: USB hub found [ 2.320194] hub 3-0:1.0: 2 ports detected [ 2.321974] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.323010] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.324463] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.325741] hub 4-0:1.0: USB hub found [ 2.326454] hub 4-0:1.0: 2 ports detected [ 2.327521] usbcore: registered new interface driver usb-storage [ 2.328810] usbcore: registered new interface driver usbserial_generic [ 2.330291] usbserial: USB Serial support registered for generic [ 2.331636] usbcore: registered new interface driver ftdi_sio [ 2.332844] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.334297] usbcore: registered new interface driver pl2303 [ 2.335809] usbserial: USB Serial support registered for pl2303 [ 2.337867] i8042: PNP: No PS/2 controller found. [ 2.338968] mousedev: PS/2 mouse device common for all mice [ 2.340232] rtc_cmos 00:03: RTC can wake from S4 [ 2.341739] rtc_cmos 00:03: registered as rtc0 [ 2.342835] rtc_cmos 00:03: setting system clock to 2025-03-20T08:43:38 UTC (1742460218) [ 2.344530] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.346943] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.347047] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.349829] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.351459] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.356102] sdhci: Secure Digital Host Controller Interface driver [ 2.357294] sdhci: Copyright(c) Pierre Ossman [ 2.358139] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.359276] usbcore: registered new interface driver usbhid [ 2.361309] usbhid: USB HID core driver [ 2.361984] u32 classifier [ 2.362410] input device check on [ 2.363004] Actions configured [ 2.363726] NET: Registered PF_INET6 protocol family [ 2.365375] Segment Routing with IPv6 [ 2.366055] In-situ OAM (IOAM) with IPv6 [ 2.366695] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.367851] NET: Registered PF_PACKET protocol family [ 2.368727] Bridge firewalling registered [ 2.369492] l2tp_core: L2TP core driver, V2.0 [ 2.370322] Key type dns_resolver registered [ 2.371092] NET: Registered PF_VSOCK protocol family [ 2.372915] IPI shorthand broadcast: enabled [ 2.374826] sched_clock: Marking stable (2249002026, 125176047)->(2476317749, -102139676) [ 2.376340] registered taskstats version 1 [ 2.377071] Loading compiled-in X.509 certificates [ 2.379803] Key type .fscrypt registered [ 2.380473] Key type fscrypt-provisioning registered [ 2.385109] Btrfs loaded, zoned=no, fsverity=no [ 2.388119] Key type encrypted registered [ 2.388870] printk: legacy console [netcon0] enabled [ 2.389717] netconsole: network logging started [ 2.524218] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.546501] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.549656] ata1: SATA link down (SStatus 0 SControl 300) [ 2.552130] ata6: SATA link down (SStatus 0 SControl 300) [ 2.554673] ata5: SATA link down (SStatus 0 SControl 300) [ 2.557088] ata4: SATA link down (SStatus 0 SControl 300) [ 2.559382] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.561460] ata3.00: applying bridge limits [ 2.563290] ata2: SATA link down (SStatus 0 SControl 300) [ 2.565255] ata3.00: configured for UDMA/100 [ 2.567630] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.598615] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.601449] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.653213] IP-Config: Complete: [ 2.655095] device=eth0, hwaddr=52:54:00:12:34:0e, ipaddr=192.168.7.14, mask=255.255.255.0, gw=192.168.7.13 [ 2.659934] host=192.168.7.14, domain=, nis-domain=(none) [ 2.662402] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.662405] nameserver0=8.8.8.8 [ 2.667364] clk: Disabling unused clocks [ 2.682825] md: Waiting for all devices to be available before autodetect [ 2.685263] md: If you don't use raid, use raid=noautodetect [ 2.687160] md: Autodetecting RAID arrays. [ 2.688604] md: autorun ... [ 2.689637] md: ... autorun DONE. [ 2.694247] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.700077] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.706262] EXT4-fs (vda): mounted filesystem 40fedf72-df0f-4a26-825b-86c01346ba98 r/w with ordered data mode. Quota mode: disabled. [ 2.710342] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.712433] devtmpfs: mounted [ 2.718132] Freeing unused kernel image (initmem) memory: 3488K [ 2.720047] Write protecting the kernel read-only data: 26624k [ 2.722684] Freeing unused kernel image (rodata/data gap) memory: 356K [ 2.724806] Run /sbin/init as init process INIT: version 3.14 booting [ 2.819221] usb 2-2: new high-speed USB device number 3 using ehci-pci Starting udev [ 2.883449] udevd[137]: starting version 3.2.14 [ 2.890797] udevd[138]: starting eudev-3.2.14 [ 3.101437] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 3.155517] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 3.221331] EXT4-fs (vda): re-mounted 40fedf72-df0f-4a26-825b-86c01346ba98 r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0 qemux86-64 login: