[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s40724 r8192 d20716 u69632
[    0.000000] Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 497544K/524288K available (10240K kernel code, 1430K rwdata, 2772K rodata, 2048K init, 366K bss, 26744K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 42100 entries in 124 pages
[    0.000000] ftrace: allocated 124 pages with 5 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000109] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
[    0.000216] Switching to timer-based delay loop, resolution 16ns
[    0.013724] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.018813] Console: colour dummy device 80x30
[    0.019713] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.019861] CPU: Testing write buffer coherency: ok
[    0.021035] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.021162] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.021225] pid_max: default: 32768 minimum: 301
[    0.022172] LSM: initializing lsm=capability,landlock,integrity
[    0.022541] landlock: Up and running.
[    0.024352] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.024387] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.042264] /cpus/cpu@0 missing clock-frequency property
[    0.042500] /cpus/cpu@1 missing clock-frequency property
[    0.042537] /cpus/cpu@2 missing clock-frequency property
[    0.042566] /cpus/cpu@3 missing clock-frequency property
[    0.042677] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.052139] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.052447] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.052689] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.053428] Setting up static identity map for 0x40200000 - 0x40200060
[    0.055692] rcu: Hierarchical SRCU implementation.
[    0.055721] rcu: 	Max phase no-delay instances is 1000.
[    0.059853] smp: Bringing up secondary CPUs ...
[    0.062859] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.062936] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.066778] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.066839] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.069394] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.069430] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.070039] smp: Brought up 1 node, 4 CPUs
[    0.070102] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.070152] CPU: All CPU(s) started in SVC mode.
[    0.081423] devtmpfs: initialized
[    0.089537] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.102132] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.102846] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.118061] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.121386] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.127510] cpuidle: using governor ladder
[    0.130551] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.130613] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.131928] Serial: AMBA PL011 UART driver
[    0.155775] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.156854] printk: console [ttyAMA0] enabled
[    0.180708] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.185230] cryptd: max_cpu_qlen set to 1000
[    0.354335] raid6: neonx8   gen()   626 MB/s
[    0.525017] raid6: neonx4   gen()  2524 MB/s
[    0.695695] raid6: neonx2   gen()  2121 MB/s
[    0.866356] raid6: neonx1   gen()  1164 MB/s
[    1.037160] raid6: int32x8  gen()   244 MB/s
[    1.208535] raid6: int32x4  gen()   250 MB/s
[    1.379673] raid6: int32x2  gen()   509 MB/s
[    1.549831] raid6: int32x1  gen()   834 MB/s
[    1.550260] raid6: using algorithm neonx4 gen() 2524 MB/s
[    1.720838] raid6: .... xor() 1219 MB/s, rmw enabled
[    1.721382] raid6: using neon recovery algorithm
[    1.724632] SCSI subsystem initialized
[    1.725468] usbcore: registered new interface driver usbfs
[    1.726082] usbcore: registered new interface driver hub
[    1.726500] usbcore: registered new device driver usb
[    1.726989] pps_core: LinuxPPS API ver. 1 registered
[    1.727126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.727396] PTP clock support registered
[    1.737918] vgaarb: loaded
[    1.741775] clocksource: Switched to clocksource arch_sys_counter
[    1.779594] NET: Registered PF_INET protocol family
[    1.780934] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.786798] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.787388] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.787897] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    1.788488] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.789044] TCP: Hash tables configured (established 4096 bind 4096)
[    1.790138] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.790455] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.791933] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.794736] RPC: Registered named UNIX socket transport module.
[    1.794918] RPC: Registered udp transport module.
[    1.795033] RPC: Registered tcp transport module.
[    1.795146] RPC: Registered tcp-with-tls transport module.
[    1.795281] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.795523] PCI: CLS 0 bytes, default 64
[    1.801824] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.805468] NFS: Registering the id_resolver key type
[    1.808338] Key type id_resolver registered
[    1.808641] Key type id_legacy registered
[    1.812264] Key type cifs.idmap registered
[    1.948258] xor: measuring software checksum speed
[    1.950890]    arm4regs        :  1504 MB/sec
[    1.953070]    8regs           :  1739 MB/sec
[    1.955238]    32regs          :  1747 MB/sec
[    1.957614]    neon            :  1562 MB/sec
[    1.957906] xor: using function: 32regs (1747 MB/sec)
[    1.958238] async_tx: api initialized (async)
[    1.958884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.959433] io scheduler mq-deadline registered
[    1.959843] io scheduler kyber registered
[    1.962793] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    1.963768] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    1.964686] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    1.965793] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    1.967472] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    1.967989] pci_bus 0000:00: root bus resource [bus 00-0f]
[    1.968167] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.968327] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    1.969460] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    1.972447] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    1.972820] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    1.972998] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    1.973182] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.973898] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    1.974077] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    1.974886] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    1.975066] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    1.975230] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.976620] PCI: bus0: Fast back to back transfers disabled
[    1.977816] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    1.978173] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    1.978403] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    1.978613] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    1.978776] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    1.978941] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    1.979900] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    1.986455] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    1.988629] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.028196] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.028235] printk: console [hvc0] enabled
[    2.029211] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.049648] [drm] features: -context_init
[    2.051607] [drm] number of scanouts: 1
[    2.052041] [drm] number of cap sets: 0
[    2.062387] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    2.121708] Console: switching to colour frame buffer device 160x50
[    2.126450] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.159330] brd: module loaded
[    2.160199] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.164826] virtio_blk virtio1: [vda] 883400 512-byte logical blocks (452 MB/431 MiB)
[    2.180181] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.181081] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.184762] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.188074] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.188617] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.189366] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.195902] hub 1-0:1.0: USB hub found
[    2.196799] hub 1-0:1.0: 4 ports detected
[    2.199958] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.202196] hub 2-0:1.0: USB hub found
[    2.202719] hub 2-0:1.0: 4 ports detected
[    2.207965] rtc-pl031 9010000.pl031: registered as rtc0
[    2.209133] rtc-pl031 9010000.pl031: setting system clock to 2025-03-25T16:15:25 UTC (1742919325)
[    2.212397] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.215278] usbcore: registered new interface driver usbhid
[    2.215856] usbhid: USB HID core driver
[    2.216637] u32 classifier
[    2.216925]     input device check on
[    2.217243]     Actions configured
[    2.219137] NET: Registered PF_INET6 protocol family
[    2.225279] Segment Routing with IPv6
[    2.225839] In-situ OAM (IOAM) with IPv6
[    2.226701] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.229343] NET: Registered PF_PACKET protocol family
[    2.230333] Bridge firewalling registered
[    2.232389] Key type dns_resolver registered
[    2.233240] NET: Registered PF_VSOCK protocol family
[    2.234451] Registering SWP/SWPB emulation handler
[    2.249836] registered taskstats version 1
[    2.266206] Key type .fscrypt registered
[    2.266647] Key type fscrypt-provisioning registered
[    2.271760] Btrfs loaded, zoned=no, fsverity=no
[    2.288141] Key type encrypted registered
[    2.290064] printk: console [netcon0] enabled
[    2.290508] netconsole: network logging started
[    2.341839] IP-Config: Complete:
[    2.342334]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.343328]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.343893]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.343928]      nameserver0=8.8.8.8
[    2.347088] clk: Disabling unused clocks
[    2.351050] md: Waiting for all devices to be available before autodetect
[    2.351747] md: If you don't use raid, use raid=noautodetect
[    2.352420] md: Autodetecting RAID arrays.
[    2.352844] md: autorun ...
[    2.353151] md: ... autorun DONE.
[    2.396952] EXT4-fs (vda): mounted filesystem 469ba8a4-98bd-423d-aab4-f239d64d0625 r/w with ordered data mode. Quota mode: disabled.
[    2.399296] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.402100] devtmpfs: mounted
[    2.531773] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.556442] Freeing unused kernel image (initmem) memory: 2048K
[    2.660145] Run /sbin/init as init process
[    2.772342] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1INIT: -1:1.0/0003:0627:0001.0001/input/input0
version 3.04 booting
[    2.775000] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    2.931534] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.138399] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    3.211765] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    3.950865] udevd[131]: starting version 3.2.14
[    4.014244] udevd[132]: starting eudev-3.2.14
[    5.712609] EXT4-fs (vda): re-mounted 469ba8a4-98bd-423d-aab4-f239d64d0625 r/w. Quota mode: disabled.
[    6.032670] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.
Starting rpcbind daemon...
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.6.75-yocto-standard #1 SMP PREEMPT Fri Feb  7 21:37:44 UTC 2025 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 25 16:15:32 2025
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.0.8 qemuarm /dev/hvc0

qemuarm login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86CameraAccessEnable
> Warning:          Could not resolve keysym XF86CameraAccessDisable
> Warning:          Could not resolve keysym XF86CameraAccessToggle
> Warning:          Could not resolve keysym XF86NextElement
> Warning:          Could not resolve keysym XF86PreviousElement
> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
> Warning:          Could not resolve keysym XF86MarkWaypoint
> Warning:          Could not resolve keysym XF86Sos
> Warning:          Could not resolve keysym XF86NavChart
> Warning:          Could not resolve keysym XF86FishingChart
> Warning:          Could not resolve keysym XF86SingleRangeRadar
> Warning:          Could not resolve keysym XF86DualRangeRadar
> Warning:          Could not resolve keysym XF86RadarOverlay
> Warning:          Could not resolve keysym XF86TraditionalSonar
> Warning:          Could not resolve keysym XF86ClearvuSonar
> Warning:          Could not resolve keysym XF86SidevuSonar
> Warning:          Could not resolve keysym XF86NavInfo
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-lddfvR7FDC,guid=af3dd13abe2cdfcf3e81000067e2d6ac
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[567]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=548 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[567]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:583): Gtk-[1;33mWARNING[0m **: [34m16:15:43.722[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:583): [1;33mWARNING[0m **: [34m16:15:43.728[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
