[ 0.000000] Linux version 6.12.22-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Wed Apr 9 16:35:17 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 817801566 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.998 MHz processor [ 0.000899] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000931] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000933] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000980] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002839] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.013673] ACPI: Early table checksum verification disabled [ 0.013679] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.013689] ACPI: RSDT 0x000000007FFE2449 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013694] ACPI: FACP 0x000000007FFE2229 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013701] ACPI: DSDT 0x000000007FFE0040 0021E9 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013703] ACPI: FACS 0x000000007FFE0000 000040 [ 0.013705] ACPI: APIC 0x000000007FFE231D 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013706] ACPI: HPET 0x000000007FFE23AD 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013708] ACPI: MCFG 0x000000007FFE23E5 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013709] ACPI: WAET 0x000000007FFE2421 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.013711] ACPI: Reserving FACP table memory at [mem 0x7ffe2229-0x7ffe231c] [ 0.013712] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2228] [ 0.013712] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.013713] ACPI: Reserving APIC table memory at [mem 0x7ffe231d-0x7ffe23ac] [ 0.013713] ACPI: Reserving HPET table memory at [mem 0x7ffe23ad-0x7ffe23e4] [ 0.013714] ACPI: Reserving MCFG table memory at [mem 0x7ffe23e5-0x7ffe2420] [ 0.013714] ACPI: Reserving WAET table memory at [mem 0x7ffe2421-0x7ffe2448] [ 0.013773] Zone ranges: [ 0.013774] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013776] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013777] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.013778] Movable zone start for each node [ 0.013778] Early memory node ranges [ 0.013779] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.013780] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.013780] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.013782] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.024940] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.025306] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.376752] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.376805] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.377182] ACPI: PM-Timer IO Port: 0x608 [ 0.377195] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.377226] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.377228] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.377230] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.377231] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.377232] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.377233] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.377235] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.377236] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.377240] TSC deadline timer available [ 0.377244] CPU topo: Max. logical packages: 1 [ 0.377245] CPU topo: Max. logical dies: 1 [ 0.377245] CPU topo: Max. dies per package: 1 [ 0.377249] CPU topo: Max. threads per core: 1 [ 0.377249] CPU topo: Num. cores per package: 4 [ 0.377250] CPU topo: Num. threads per package: 4 [ 0.377250] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.377265] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.377281] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.377282] Booting paravirtualized kernel on KVM [ 0.377284] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.377289] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.390488] percpu: Embedded 58 pages/cpu s199704 r8192 d29672 u524288 [ 0.390518] Kernel command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.390580] random: crng init done [ 0.412147] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.431818] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.431865] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.449886] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.449893] software IO TLB: area num 4. [ 0.449894] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.642670] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.642796] ftrace: allocating 53718 entries in 210 pages [ 0.653795] ftrace: allocated 210 pages with 4 groups [ 0.654462] Dynamic Preempt: full [ 0.666259] rcu: Preemptible hierarchical RCU implementation. [ 0.666261] rcu: RCU event tracing is enabled. [ 0.666261] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.666264] All grace periods are expedited (rcu_expedited). [ 0.666264] Trampoline variant of Tasks RCU enabled. [ 0.666265] Rude variant of Tasks RCU enabled. [ 0.666265] Tracing variant of Tasks RCU enabled. [ 0.666266] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.666266] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.666280] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.666282] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.666283] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.676454] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.676663] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.676737] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.681660] Console: colour VGA+ 80x25 [ 0.681697] printk: legacy console [ttyS0] enabled [ 0.810584] ACPI: Core revision 20240827 [ 0.811353] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.812953] APIC: Switch to symmetric I/O mode setup [ 0.814848] x2apic enabled [ 0.815606] APIC: Switched APIC routing to: physical x2apic [ 0.817687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.818771] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.820553] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.822689] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.823555] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.824558] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.825556] Spectre V2 : Mitigation: Retpolines [ 0.826554] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.827554] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.828554] Speculative Store Bypass: Vulnerable [ 0.829569] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.830555] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.831554] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.832555] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.833554] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.853116] Freeing SMP alternatives memory: 56K [ 0.853557] pid_max: default: 32768 minimum: 301 [ 0.854573] LSM: initializing lsm=capability,landlock [ 0.855580] landlock: Up and running. [ 0.856228] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.856558] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.857769] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.858675] Performance Events: AMD PMU driver. [ 0.859483] ... version: 0 [ 0.859556] ... bit width: 48 [ 0.860238] ... generic registers: 4 [ 0.860556] ... value mask: 0000ffffffffffff [ 0.861470] ... max period: 00007fffffffffff [ 0.861557] ... fixed-purpose events: 0 [ 0.862251] ... event mask: 000000000000000f [ 0.862673] signal: max sigframe size: 1776 [ 0.863429] rcu: Hierarchical SRCU implementation. [ 0.863558] rcu: Max phase no-delay instances is 400. [ 0.864518] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.864720] smp: Bringing up secondary CPUs ... [ 0.865680] smpboot: x86: Booting SMP configuration: [ 0.866562] .... node #0, CPUs: #1 #2 #3 [ 0.903578] smp: Brought up 1 node, 4 CPUs [ 0.905295] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.906040] Memory: 5081592K/5221848K available (20480K kernel code, 2434K rwdata, 5796K rodata, 3492K init, 2072K bss, 134056K reserved, 0K cma-reserved) [ 0.906754] devtmpfs: initialized [ 0.907697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.908560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.910642] pinctrl core: initialized pinctrl subsystem [ 0.913839] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.914681] thermal_sys: Registered thermal governor 'step_wise' [ 0.914683] thermal_sys: Registered thermal governor 'user_space' [ 0.915567] cpuidle: using governor menu [ 0.917629] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.918558] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.919565] PCI: Using configuration type 1 for base access [ 0.920871] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.001224] raid6: sse2x4 gen() 23847 MB/s [ 1.018656] raid6: sse2x2 gen() 25344 MB/s [ 1.035861] raid6: sse2x1 gen() 6905 MB/s [ 1.038557] raid6: using algorithm sse2x2 gen() 25344 MB/s [ 1.056111] raid6: .... xor() 19059 MB/s, rmw enabled [ 1.056556] raid6: using ssse3x2 recovery algorithm [ 1.057556] ACPI: Added _OSI(Module Device) [ 1.058292] ACPI: Added _OSI(Processor Device) [ 1.059557] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.060414] ACPI: Added _OSI(Processor Aggregator Device) [ 1.062371] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.064653] ACPI: Interpreter enabled [ 1.065569] ACPI: PM: (supports S0 S3 S5) [ 1.066276] ACPI: Using IOAPIC for interrupt routing [ 1.066644] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.067564] PCI: Using E820 reservations for host bridge windows [ 1.068752] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.072624] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.073569] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.074622] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.075635] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.076746] PCI host bridge to bus 0000:00 [ 1.077567] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.078565] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.079566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.080564] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.081568] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.082564] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.083566] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.084671] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.086984] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.089562] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.092563] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.099559] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.101558] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.103762] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.105558] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.107560] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.112561] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.118679] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.121612] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.125249] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.127067] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.130092] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.130745] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.132545] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.136276] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.137558] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.142558] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.145208] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.147049] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.148543] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.151024] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.152250] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.154557] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.156410] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.156904] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.159732] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.160936] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.161769] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.165563] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.166848] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.168879] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.171557] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.174278] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.174609] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.175610] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.176602] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.177607] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.178601] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.179605] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.180604] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.181593] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.182580] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.183595] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.184570] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.185567] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.186601] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.187561] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.188564] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.190162] iommu: Default domain type: Translated [ 1.190557] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.192031] SCSI subsystem initialized [ 1.193133] ACPI: bus type USB registered [ 1.193616] usbcore: registered new interface driver usbfs [ 1.194836] usbcore: registered new interface driver hub [ 1.195561] usbcore: registered new device driver usb [ 1.196463] pps_core: LinuxPPS API ver. 1 registered [ 1.196556] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.197562] PTP clock support registered [ 1.199020] Bluetooth: Core ver 2.22 [ 1.199573] NET: Registered PF_BLUETOOTH protocol family [ 1.200496] Bluetooth: HCI device and connection manager initialized [ 1.200565] Bluetooth: HCI socket layer initialized [ 1.201404] Bluetooth: L2CAP socket layer initialized [ 1.201562] Bluetooth: SCO socket layer initialized [ 1.202575] PCI: Using ACPI for IRQ routing [ 1.253270] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.253553] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.253553] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.253560] vgaarb: loaded [ 1.254233] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.254557] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.258680] clocksource: Switched to clocksource kvm-clock [ 1.282001] pnp: PnP ACPI init [ 1.282723] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.284163] pnp: PnP ACPI: found 5 devices [ 1.293397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.295375] NET: Registered PF_INET protocol family [ 1.330164] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.332976] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.334893] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.336207] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.338175] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.343721] TCP: Hash tables configured (established 65536 bind 65536) [ 1.345076] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.348472] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.350498] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.353117] RPC: Registered named UNIX socket transport module. [ 1.354389] RPC: Registered udp transport module. [ 1.355392] RPC: Registered tcp transport module. [ 1.356400] RPC: Registered tcp-with-tls transport module. [ 1.357568] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.358996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.360302] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.361669] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.363141] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.364597] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.366050] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.368271] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.370064] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.371747] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.373541] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.376080] PCI: CLS 0 bytes, default 64 [ 1.377024] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.380837] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.382595] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.411537] Initialise system trusted keyrings [ 1.415257] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.416785] NFS: Registering the id_resolver key type [ 1.417717] Key type id_resolver registered [ 1.418421] Key type id_legacy registered [ 1.421357] Key type cifs.idmap registered [ 1.429557] xor: automatically using best checksumming function avx [ 1.430892] Key type asymmetric registered [ 1.431757] Asymmetric key parser 'x509' registered [ 1.432983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.434539] io scheduler mq-deadline registered [ 1.435490] io scheduler kyber registered [ 1.436346] io scheduler bfq registered [ 1.437678] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.439995] ACPI: button: Power Button [PWRF] [ 1.442916] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.446697] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.449019] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.460115] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.464752] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.468200] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.472589] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.480993] Linux agpgart interface v0.103 [ 1.481903] ACPI: bus type drm_connector registered [ 1.482860] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.483813] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.487035] Console: switching to colour dummy device 80x25 [ 1.488182] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.488183] [drm] features: -context_init [ 1.490464] [drm] number of scanouts: 1 [ 1.491147] [drm] number of cap sets: 0 [ 1.492165] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.509083] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.537702] Console: switching to colour frame buffer device 160x50 [ 1.563949] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.621719] brd: module loaded [ 1.629989] loop: module loaded [ 1.631677] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.638609] virtio_blk virtio3: [vda] 1018072 512-byte logical blocks (521 MB/497 MiB) [ 1.646726] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.650244] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.652999] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.661909] scsi host0: ahci [ 1.663719] scsi host1: ahci [ 1.665461] scsi host2: ahci [ 1.667842] scsi host3: ahci [ 1.669216] scsi host4: ahci [ 1.670589] scsi host5: ahci [ 1.671818] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.674675] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.677507] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.680349] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.683203] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.686056] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.691813] e100: Intel(R) PRO/100 Network Driver [ 1.692772] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.694208] e1000: Intel(R) PRO/1000 Network Driver [ 1.695089] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.696111] e1000e: Intel(R) PRO/1000 Network Driver [ 1.696992] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.698063] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.699006] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.700821] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.702165] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.703622] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.712911] hub 1-0:1.0: USB hub found [ 1.718150] hub 1-0:1.0: 2 ports detected [ 1.719240] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.721955] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.726080] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.733977] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.736987] hub 2-0:1.0: USB hub found [ 1.739009] hub 2-0:1.0: 6 ports detected [ 1.763249] hub 1-0:1.0: USB hub found [ 1.765268] hub 1-0:1.0: 2 ports detected [ 1.767451] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.769901] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.773450] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.776993] hub 3-0:1.0: USB hub found [ 1.778704] hub 3-0:1.0: 2 ports detected [ 1.781834] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.784195] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.788237] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.792226] hub 4-0:1.0: USB hub found [ 1.793906] hub 4-0:1.0: 2 ports detected [ 1.796047] usbcore: registered new interface driver usb-storage [ 1.799570] usbcore: registered new interface driver usbserial_generic [ 1.802709] usbserial: USB Serial support registered for generic [ 1.807256] usbcore: registered new interface driver ftdi_sio [ 1.809808] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.813130] usbcore: registered new interface driver pl2303 [ 1.815491] usbserial: USB Serial support registered for pl2303 [ 1.818168] i8042: PNP: No PS/2 controller found. [ 1.820673] mousedev: PS/2 mouse device common for all mice [ 1.823539] rtc_cmos 00:03: RTC can wake from S4 [ 1.827326] rtc_cmos 00:03: registered as rtc0 [ 1.829305] rtc_cmos 00:03: setting system clock to 2025-04-10T22:19:54 UTC (1744323594) [ 1.832571] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.836013] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.836522] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.839287] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.842729] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.849067] sdhci: Secure Digital Host Controller Interface driver [ 1.851237] sdhci: Copyright(c) Pierre Ossman [ 1.852828] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.854990] usbcore: registered new interface driver usbhid [ 1.856954] usbhid: USB HID core driver [ 1.858372] u32 classifier [ 1.859379] input device check on [ 1.860063] Actions configured [ 1.860907] NET: Registered PF_INET6 protocol family [ 1.862462] Segment Routing with IPv6 [ 1.863248] In-situ OAM (IOAM) with IPv6 [ 1.863993] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.865294] NET: Registered PF_PACKET protocol family [ 1.866429] Bridge firewalling registered [ 1.867713] l2tp_core: L2TP core driver, V2.0 [ 1.868481] Key type dns_resolver registered [ 1.869395] NET: Registered PF_VSOCK protocol family [ 1.871688] IPI shorthand broadcast: enabled [ 1.874655] sched_clock: Marking stable (1735005080, 138882943)->(2049220605, -175332582) [ 1.876314] registered taskstats version 1 [ 1.877589] Loading compiled-in X.509 certificates [ 1.879970] Key type .fscrypt registered [ 1.880656] Key type fscrypt-provisioning registered [ 1.946360] Btrfs loaded, zoned=no, fsverity=no [ 1.950996] Key type encrypted registered [ 1.952998] printk: legacy console [netcon0] enabled [ 1.955199] netconsole: network logging started [ 1.994962] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.038506] ata5: SATA link down (SStatus 0 SControl 300) [ 2.046407] ata4: SATA link down (SStatus 0 SControl 300) [ 2.049134] ata2: SATA link down (SStatus 0 SControl 300) [ 2.050560] ata1: SATA link down (SStatus 0 SControl 300) [ 2.053220] ata6: SATA link down (SStatus 0 SControl 300) [ 2.057656] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.060722] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.063233] ata3.00: applying bridge limits [ 2.065272] ata3.00: configured for UDMA/100 [ 2.068061] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.095318] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.098344] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.122949] IP-Config: Complete: [ 2.124480] device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19 [ 2.129562] host=192.168.7.20, domain=, nis-domain=(none) [ 2.129988] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.132201] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.132205] nameserver0=8.8.8.8 [ 2.137368] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.138846] [ 2.139050] clk: Disabling unused clocks [ 2.150512] md: Waiting for all devices to be available before autodetect [ 2.151688] md: If you don't use raid, use raid=noautodetect [ 2.152674] md: Autodetecting RAID arrays. [ 2.153487] md: autorun ... [ 2.154091] md: ... autorun DONE. [ 2.161622] EXT4-fs (vda): mounted filesystem 138023c9-84e6-47a0-a6ad-25729ed08de4 r/w with ordered data mode. Quota mode: disabled. [ 2.163504] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.164586] devtmpfs: mounted [ 2.167688] Freeing unused kernel image (initmem) memory: 3492K [ 2.168600] Write protecting the kernel read-only data: 26624k [ 2.169921] Freeing unused kernel image (rodata/data gap) memory: 348K [ 2.170927] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 2.252956] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.309757] udevd[140]: starting version 3.2.14 [ 2.319278] udevd[141]: starting eudev-3.2.14 [ 2.385494] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.441313] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.503032] EXT4-fs (vda): re-mounted 138023c9-84e6-47a0-a6ad-25729ed08de4 r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0 qemux86-64 login: