[ 0.220607] Serial: AMBA PL011 UART driver [ 0.252658] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.253734] printk: console [ttyAMA0] enabled [ 0.287978] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.294341] cryptd: max_cpu_qlen set to 1000 [ 0.467987] raid6: neonx8 gen() 513 MB/s [ 0.640518] raid6: neonx4 gen() 2016 MB/s [ 0.813273] raid6: neonx2 gen() 1819 MB/s [ 0.985918] raid6: neonx1 gen() 1060 MB/s [ 1.159017] raid6: int32x8 gen() 182 MB/s [ 1.333561] raid6: int32x4 gen() 186 MB/s [ 1.506045] raid6: int32x2 gen() 551 MB/s [ 1.681323] raid6: int32x1 gen() 445 MB/s [ 1.682025] raid6: using algorithm neonx4 gen() 2016 MB/s [ 1.855549] raid6: .... xor() 705 MB/s, rmw enabled [ 1.856326] raid6: using neon recovery algorithm [ 1.861975] SCSI subsystem initialized [ 1.863360] usbcore: registered new interface driver usbfs [ 1.864217] usbcore: registered new interface driver hub [ 1.864833] usbcore: registered new device driver usb [ 1.866026] pps_core: LinuxPPS API ver. 1 registered [ 1.866251] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.866711] PTP clock support registered [ 1.882514] vgaarb: loaded [ 1.894596] clocksource: Switched to clocksource arch_sys_counter [ 1.949924] NET: Registered PF_INET protocol family [ 1.951616] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.965298] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.966221] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.967056] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.967961] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.968678] TCP: Hash tables configured (established 8192 bind 8192) [ 1.970252] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.970852] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.972618] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.977007] RPC: Registered named UNIX socket transport module. [ 1.977208] RPC: Registered udp transport module. [ 1.977319] RPC: Registered tcp transport module. [ 1.977458] RPC: Registered tcp-with-tls transport module. [ 1.977621] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.977905] PCI: CLS 0 bytes, default 64 [ 1.984788] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.989002] NFS: Registering the id_resolver key type [ 1.990305] Key type id_resolver registered [ 1.990476] Key type id_legacy registered [ 1.997601] Key type cifs.idmap registered [ 2.176450] xor: measuring software checksum speed [ 2.180291] arm4regs : 1025 MB/sec [ 2.183482] 8regs : 1186 MB/sec [ 2.186577] 32regs : 1322 MB/sec [ 2.189620] neon : 1227 MB/sec [ 2.190016] xor: using function: 32regs (1322 MB/sec) [ 2.190442] async_tx: api initialized (async) [ 2.191298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.191945] io scheduler mq-deadline registered [ 2.192350] io scheduler kyber registered [ 2.196593] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.197734] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.198781] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.200242] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.202717] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.203408] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.203670] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.204428] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.206098] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 2.209150] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 2.209670] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 2.209879] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.210168] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.211383] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 2.211673] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.212999] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 2.213275] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.213513] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.216077] PCI: bus0: Fast back to back transfers disabled [ 2.218344] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 2.219280] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 2.219868] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 2.220478] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 2.221002] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 2.221581] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 2.223165] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.236330] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.239365] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.326405] printk: console [hvc0] enabled [ 2.328214] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.347524] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.347562] [drm] features: -context_init [ 2.350127] [drm] number of scanouts: 1 [ 2.350808] [drm] number of cap sets: 0 [ 2.363615] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 2.458425] Console: switching to colour frame buffer device 160x50 [ 2.473395] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.523688] brd: module loaded [ 2.525708] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.531585] virtio_blk virtio1: [vda] 4828568 512-byte logical blocks (2.47 GB/2.30 GiB) [ 2.560648] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.562068] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.567842] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.573070] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.577430] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.578438] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.587384] hub 1-0:1.0: USB hub found [ 2.588628] hub 1-0:1.0: 4 ports detected [ 2.593377] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.596822] hub 2-0:1.0: USB hub found [ 2.597636] hub 2-0:1.0: 4 ports detected [ 2.606136] rtc-pl031 9010000.pl031: registered as rtc0 [ 2.607912] rtc-pl031 9010000.pl031: setting system clock to 2025-04-16T15:03:00 UTC (1744815780) [ 2.613366] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.622698] usbcore: registered new interface driver usbhid [ 2.624049] usbhid: USB HID core driver [ 2.626139] u32 classifier [ 2.626582] input device check on [ 2.627065] Actions configured [ 2.629664] NET: Registered PF_INET6 protocol family [ 2.639758] Segment Routing with IPv6 [ 2.640560] In-situ OAM (IOAM) with IPv6 [ 2.641704] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.645477] NET: Registered PF_PACKET protocol family [ 2.646855] Bridge firewalling registered [ 2.648215] Key type dns_resolver registered [ 2.649811] NET: Registered PF_VSOCK protocol family [ 2.652035] Registering SWP/SWPB emulation handler [ 2.676800] registered taskstats version 1 [ 2.705119] Key type .fscrypt registered [ 2.705943] Key type fscrypt-provisioning registered [ 2.714538] Btrfs loaded, zoned=no, fsverity=no [ 2.743777] Key type encrypted registered [ 2.747509] printk: console [netcon0] enabled [ 2.748537] netconsole: network logging started [ 2.794677] IP-Config: Complete: [ 2.795655] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 2.797552] host=192.168.7.2, domain=, nis-domain=(none) [ 2.798376] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.798422] nameserver0=8.8.8.8 [ 2.803232] clk: Disabling unused clocks [ 2.808690] md: Waiting for all devices to be available before autodetect [ 2.813194] md: If you don't use raid, use raid=noautodetect [ 2.814877] md: Autodetecting RAID arrays. [ 2.815661] md: autorun ... [ 2.816171] md: ... autorun DONE. [ 2.875479] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.945520] EXT4-fs (vda): mounted filesystem 7ec550dd-6355-441a-ab5d-2816089386c1 r/w with ordered data mode. Quota mode: disabled. [ 2.949533] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.954706] devtmpfs: mounted [ 3.157531] Freeing unused kernel image (initmem) memory: 2048K [ 3.339257] Run /sbin/init as init process [ 3.347182] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.351535] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.504061] usb 1-2: new high-speed USB device number 3 using xhci_hcd INIT: version 3.04 booting [ 3.734619] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.815481] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 5.567521] udevd[132]: starting version 3.2.14 [ 5.675674] udevd[133]: starting eudev-3.2.14 [ 8.656073] EXT4-fs (vda): re-mounted 7ec550dd-6355-441a-ab5d-2816089386c1 r/w. Quota mode: disabled. [ 9.192359] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... Error: ipv4: Address already assigned. Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.84-yocto-standard #1 SMP PREEMPT Tue Mar 25 18:25:48 UTC 2025 armv7l Kernel command line: root=/dev/vda rw mem=768M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 16 15:03:19 2025 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Starting Telephony daemon Starting crond: OK Starting tcf-agent: OK The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server Poky (Yocto Project Reference Distro) 5.0.9 qemuarm hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-wrWklaRSFj,guid=3f035daf18926e71f8c7bf2367ffc6bd Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[619]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=601 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[619]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:638): Gtk-WARNING **: 15:03:50.300: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:638): WARNING **: 15:03:50.314: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format [ 108.085817] hrtimer: interrupt took 36054032 ns [ 1206.887436] hellomod: loading out-of-tree module taints kernel. [ 1206.946406] Hello world! [ 1214.540213] Cleaning up hellomod.