[ 0.000000] Linux version 6.12.22-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Wed Apr 9 16:35:17 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 526909551 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2750.000 MHz processor [ 0.001359] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001408] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001412] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001482] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003991] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004425] ACPI: Early table checksum verification disabled [ 0.004429] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.004439] ACPI: RSDT 0x000000007FFE2449 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004446] ACPI: FACP 0x000000007FFE2229 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004451] ACPI: DSDT 0x000000007FFE0040 0021E9 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004455] ACPI: FACS 0x000000007FFE0000 000040 [ 0.004457] ACPI: APIC 0x000000007FFE231D 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004460] ACPI: HPET 0x000000007FFE23AD 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004462] ACPI: MCFG 0x000000007FFE23E5 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004465] ACPI: WAET 0x000000007FFE2421 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004467] ACPI: Reserving FACP table memory at [mem 0x7ffe2229-0x7ffe231c] [ 0.004469] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2228] [ 0.004470] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.004471] ACPI: Reserving APIC table memory at [mem 0x7ffe231d-0x7ffe23ac] [ 0.004472] ACPI: Reserving HPET table memory at [mem 0x7ffe23ad-0x7ffe23e4] [ 0.004472] ACPI: Reserving MCFG table memory at [mem 0x7ffe23e5-0x7ffe2420] [ 0.004473] ACPI: Reserving WAET table memory at [mem 0x7ffe2421-0x7ffe2448] [ 0.004541] Zone ranges: [ 0.004542] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004544] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004546] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004547] Movable zone start for each node [ 0.004548] Early memory node ranges [ 0.004548] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004550] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.004551] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004552] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.004818] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004856] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.025946] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.026016] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.026606] ACPI: PM-Timer IO Port: 0x608 [ 0.026622] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.026661] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.026664] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.026666] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.026667] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.026668] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.026669] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.026672] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.026673] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.026679] TSC deadline timer available [ 0.026684] CPU topo: Max. logical packages: 1 [ 0.026684] CPU topo: Max. logical dies: 1 [ 0.026685] CPU topo: Max. dies per package: 1 [ 0.026689] CPU topo: Max. threads per core: 1 [ 0.026690] CPU topo: Num. cores per package: 4 [ 0.026690] CPU topo: Num. threads per package: 4 [ 0.026691] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.026710] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.026730] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.026732] Booting paravirtualized kernel on KVM [ 0.026734] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.026741] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.026983] percpu: Embedded 58 pages/cpu s199704 r8192 d29672 u524288 [ 0.027014] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.027093] random: crng init done [ 0.027964] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.028378] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.028423] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.028715] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.028718] software IO TLB: area num 4. [ 0.028719] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.035045] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.035074] ftrace: allocating 53718 entries in 210 pages [ 0.048497] ftrace: allocated 210 pages with 4 groups [ 0.048564] Dynamic Preempt: full [ 0.048852] rcu: Preemptible hierarchical RCU implementation. [ 0.048854] rcu: RCU event tracing is enabled. [ 0.048854] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.048856] All grace periods are expedited (rcu_expedited). [ 0.048857] Trampoline variant of Tasks RCU enabled. [ 0.048857] Rude variant of Tasks RCU enabled. [ 0.048858] Tracing variant of Tasks RCU enabled. [ 0.048858] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.048859] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.048867] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.048869] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.048871] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.057274] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.059727] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.059814] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.066595] Console: colour VGA+ 80x25 [ 0.066652] printk: legacy console [ttyS0] enabled [ 0.381530] ACPI: Core revision 20240827 [ 0.382618] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.389793] APIC: Switch to symmetric I/O mode setup [ 0.393262] x2apic enabled [ 0.395410] APIC: Switched APIC routing to: physical x2apic [ 0.400551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.402823] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.411857] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.413990] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.414860] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.415868] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.416869] Spectre V2 : Mitigation: Retpolines [ 0.417865] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.418863] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.419861] Speculative Store Bypass: Vulnerable [ 0.420878] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.421860] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.422859] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.423860] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.424859] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.450692] Freeing SMP alternatives memory: 56K [ 0.450865] pid_max: default: 32768 minimum: 301 [ 0.451886] LSM: initializing lsm=capability,landlock [ 0.452911] landlock: Up and running. [ 0.453895] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.454868] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.456193] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.457144] Performance Events: AMD PMU driver. [ 0.457866] ... version: 0 [ 0.458862] ... bit width: 48 [ 0.459862] ... generic registers: 4 [ 0.460863] ... value mask: 0000ffffffffffff [ 0.461862] ... max period: 00007fffffffffff [ 0.462862] ... fixed-purpose events: 0 [ 0.463863] ... event mask: 000000000000000f [ 0.464979] signal: max sigframe size: 1776 [ 0.465931] rcu: Hierarchical SRCU implementation. [ 0.466862] rcu: Max phase no-delay instances is 400. [ 0.467921] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.469060] smp: Bringing up secondary CPUs ... [ 0.469965] smpboot: x86: Booting SMP configuration: [ 0.470873] .... node #0, CPUs: #1 #2 #3 [ 0.505881] smp: Brought up 1 node, 4 CPUs [ 0.507864] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 0.510519] Memory: 5081592K/5221848K available (20480K kernel code, 2434K rwdata, 5796K rodata, 3492K init, 2072K bss, 134056K reserved, 0K cma-reserved) [ 0.511991] devtmpfs: initialized [ 0.513933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.514868] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.516068] pinctrl core: initialized pinctrl subsystem [ 0.517303] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.518024] thermal_sys: Registered thermal governor 'step_wise' [ 0.518027] thermal_sys: Registered thermal governor 'user_space' [ 0.518890] cpuidle: using governor menu [ 0.521110] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.521867] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.522876] PCI: Using configuration type 1 for base access [ 0.523956] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.546862] raid6: sse2x4 gen() 12587 MB/s [ 0.564861] raid6: sse2x2 gen() 12987 MB/s [ 0.582863] raid6: sse2x1 gen() 6398 MB/s [ 0.583863] raid6: using algorithm sse2x2 gen() 12987 MB/s [ 0.601863] raid6: .... xor() 7108 MB/s, rmw enabled [ 0.602864] raid6: using ssse3x2 recovery algorithm [ 0.603962] ACPI: Added _OSI(Module Device) [ 0.604864] ACPI: Added _OSI(Processor Device) [ 0.605865] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.606864] ACPI: Added _OSI(Processor Aggregator Device) [ 0.608569] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.610006] ACPI: Interpreter enabled [ 0.610878] ACPI: PM: (supports S0 S3 S5) [ 0.611865] ACPI: Using IOAPIC for interrupt routing [ 0.612915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.613865] PCI: Using E820 reservations for host bridge windows [ 0.614967] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.617684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.617872] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.618930] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.619931] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.620959] PCI host bridge to bus 0000:00 [ 0.621869] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.622865] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.623866] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.624897] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.625866] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.626865] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.627866] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.629046] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.631966] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.634863] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.636863] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.642864] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.645839] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.646704] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.647862] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.649862] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.655587] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.657671] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.659869] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.663868] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.666692] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.669548] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.669925] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.671634] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.673716] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.674862] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.679867] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.682723] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.686380] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.690336] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.692861] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.694968] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.697862] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.700085] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.701425] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.704550] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.705450] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.706205] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.711683] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.712695] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.714809] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.717084] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.719327] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.719962] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.720962] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.721960] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.722969] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.723960] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.724994] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.725986] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.726914] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.727879] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.728876] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.729874] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.730874] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.731873] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.732873] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.733882] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.735243] iommu: Default domain type: Translated [ 0.735863] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.736968] SCSI subsystem initialized [ 0.737898] ACPI: bus type USB registered [ 0.738888] usbcore: registered new interface driver usbfs [ 0.739879] usbcore: registered new interface driver hub [ 0.740884] usbcore: registered new device driver usb [ 0.741896] pps_core: LinuxPPS API ver. 1 registered [ 0.742863] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.743879] PTP clock support registered [ 0.745082] Bluetooth: Core ver 2.22 [ 0.745879] NET: Registered PF_BLUETOOTH protocol family [ 0.746862] Bluetooth: HCI device and connection manager initialized [ 0.747865] Bluetooth: HCI socket layer initialized [ 0.748864] Bluetooth: L2CAP socket layer initialized [ 0.749871] Bluetooth: SCO socket layer initialized [ 0.750923] PCI: Using ACPI for IRQ routing [ 0.824034] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.824855] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.824855] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.824874] vgaarb: loaded [ 0.825584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.825863] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.831323] clocksource: Switched to clocksource kvm-clock [ 0.833402] pnp: PnP ACPI init [ 0.834505] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.836721] pnp: PnP ACPI: found 5 devices [ 0.847237] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.852947] NET: Registered PF_INET protocol family [ 0.854286] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.857629] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.863230] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.865031] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.867137] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.869221] TCP: Hash tables configured (established 65536 bind 65536) [ 0.871783] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.873455] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875285] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.885405] RPC: Registered named UNIX socket transport module. [ 0.890334] RPC: Registered udp transport module. [ 0.894827] RPC: Registered tcp transport module. [ 0.898487] RPC: Registered tcp-with-tls transport module. [ 0.902804] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.905506] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.907834] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.909383] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.911269] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.914647] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.916409] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.918550] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.920780] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.922821] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.928722] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.935329] PCI: CLS 0 bytes, default 64 [ 0.936442] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.938033] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.940006] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.948354] Initialise system trusted keyrings [ 0.949596] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.952058] NFS: Registering the id_resolver key type [ 0.953282] Key type id_resolver registered [ 0.954325] Key type id_legacy registered [ 0.959384] Key type cifs.idmap registered [ 0.972711] xor: automatically using best checksumming function avx [ 0.979028] Key type asymmetric registered [ 0.979967] Asymmetric key parser 'x509' registered [ 0.981175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.982975] io scheduler mq-deadline registered [ 0.984052] io scheduler kyber registered [ 0.985015] io scheduler bfq registered [ 0.986441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.998267] ACPI: button: Power Button [PWRF] [ 1.000183] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.002663] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.006104] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.015394] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.017886] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.019592] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.022007] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.049788] Linux agpgart interface v0.103 [ 1.050990] ACPI: bus type drm_connector registered [ 1.052358] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.053743] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.058002] Console: switching to colour dummy device 80x25 [ 1.063223] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.063225] [drm] features: -context_init [ 1.066588] [drm] number of scanouts: 1 [ 1.070672] [drm] number of cap sets: 0 [ 1.072061] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.082190] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.151461] Console: switching to colour frame buffer device 160x50 [ 1.159804] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.164509] brd: module loaded [ 1.176012] loop: module loaded [ 1.177038] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.183656] virtio_blk virtio3: [vda] 1018064 512-byte logical blocks (521 MB/497 MiB) [ 1.193797] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.195895] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.202689] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.206606] scsi host0: ahci [ 1.208785] scsi host1: ahci [ 1.209932] scsi host2: ahci [ 1.211142] scsi host3: ahci [ 1.212588] scsi host4: ahci [ 1.213733] scsi host5: ahci [ 1.214594] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.217423] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.220789] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.228811] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.231090] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.234315] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.248490] e100: Intel(R) PRO/100 Network Driver [ 1.250287] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.254943] e1000: Intel(R) PRO/1000 Network Driver [ 1.256868] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.259145] e1000e: Intel(R) PRO/1000 Network Driver [ 1.264902] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.266707] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.269533] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.273166] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.276760] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.292731] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.304250] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.306053] hub 1-0:1.0: USB hub found [ 1.307056] hub 1-0:1.0: 6 ports detected [ 1.308337] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.309913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.312697] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.315941] hub 2-0:1.0: USB hub found [ 1.317765] hub 2-0:1.0: 2 ports detected [ 1.322269] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.326144] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.329385] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.333809] hub 3-0:1.0: USB hub found [ 1.335261] hub 3-0:1.0: 2 ports detected [ 1.343823] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.346858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.352379] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.356893] hub 4-0:1.0: USB hub found [ 1.358024] hub 4-0:1.0: 2 ports detected [ 1.359537] usbcore: registered new interface driver usb-storage [ 1.362031] usbcore: registered new interface driver usbserial_generic [ 1.367046] usbserial: USB Serial support registered for generic [ 1.370843] usbcore: registered new interface driver ftdi_sio [ 1.373465] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.375915] usbcore: registered new interface driver pl2303 [ 1.380897] usbserial: USB Serial support registered for pl2303 [ 1.384450] i8042: PNP: No PS/2 controller found. [ 1.388501] mousedev: PS/2 mouse device common for all mice [ 1.390949] rtc_cmos 00:03: RTC can wake from S4 [ 1.394833] rtc_cmos 00:03: registered as rtc0 [ 1.399377] rtc_cmos 00:03: setting system clock to 2025-04-19T01:12:38 UTC (1745025158) [ 1.402480] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.408436] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.408590] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.409973] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.416041] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.419040] sdhci: Secure Digital Host Controller Interface driver [ 1.422739] sdhci: Copyright(c) Pierre Ossman [ 1.424170] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.425892] usbcore: registered new interface driver usbhid [ 1.427417] usbhid: USB HID core driver [ 1.428462] u32 classifier [ 1.429214] input device check on [ 1.430173] Actions configured [ 1.431803] NET: Registered PF_INET6 protocol family [ 1.444063] Segment Routing with IPv6 [ 1.446143] In-situ OAM (IOAM) with IPv6 [ 1.449131] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.455775] NET: Registered PF_PACKET protocol family [ 1.459987] Bridge firewalling registered [ 1.463210] l2tp_core: L2TP core driver, V2.0 [ 1.466953] Key type dns_resolver registered [ 1.470035] NET: Registered PF_VSOCK protocol family [ 1.474844] IPI shorthand broadcast: enabled [ 1.484240] sched_clock: Marking stable (1138008310, 346119280)->(2007332779, -523205189) [ 1.486390] registered taskstats version 1 [ 1.487474] Loading compiled-in X.509 certificates [ 1.489879] Key type .fscrypt registered [ 1.495673] Key type fscrypt-provisioning registered [ 1.497553] Btrfs loaded, zoned=no, fsverity=no [ 1.500250] Key type encrypted registered [ 1.501714] printk: legacy console [netcon0] enabled [ 1.504050] netconsole: network logging started [ 1.554418] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.560137] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.571387] ata4: SATA link down (SStatus 0 SControl 300) [ 1.583769] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.585342] ata3.00: applying bridge limits [ 1.587218] ata5: SATA link down (SStatus 0 SControl 300) [ 1.588941] ata3.00: configured for UDMA/100 [ 1.613110] ata2: SATA link down (SStatus 0 SControl 300) [ 1.623191] ata1: SATA link down (SStatus 0 SControl 300) [ 1.646309] ata6: SATA link down (SStatus 0 SControl 300) [ 1.653476] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.680426] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.682405] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.702162] IP-Config: Complete: [ 1.703159] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 1.706343] host=192.168.7.16, domain=, nis-domain=(none) [ 1.707953] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.707956] nameserver0=8.8.8.8 [ 1.714567] clk: Disabling unused clocks [ 1.718201] md: Waiting for all devices to be available before autodetect [ 1.721168] md: If you don't use raid, use raid=noautodetect [ 1.724262] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.726563] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.730023] md: Autodetecting RAID arrays. [ 1.730986] md: autorun ... [ 1.731557] md: ... autorun DONE. [ 1.740554] EXT4-fs (vda): mounted filesystem 1041c54f-3611-405b-9ee8-66d751fb268d r/w with ordered data mode. Quota mode: disabled. [ 1.743207] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.744773] devtmpfs: mounted [ 1.746421] Freeing unused kernel image (initmem) memory: 3492K [ 1.750188] Write protecting the kernel read-only data: 26624k [ 1.756151] Freeing unused kernel image (rodata/data gap) memory: 348K [ 1.758309] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.860043] udevd[140]: starting version 3.2.14 [ 1.865744] udevd[141]: starting eudev-3.2.14 [ 1.885150] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.017184] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.070508] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.131950] EXT4-fs (vda): re-mounted 1041c54f-3611-405b-9ee8-66d751fb268d r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0 qemux86-64 login: