[    0.000000] Linux version 6.12.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Apr 14 02:03:29 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 474673159 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000867] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000898] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000901] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002783] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002894] ACPI: Early table checksum verification disabled
[    0.002895] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002901] ACPI: RSDT 0x000000001FFE2449 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002905] ACPI: FACP 0x000000001FFE2229 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002909] ACPI: DSDT 0x000000001FFE0040 0021E9 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002911] ACPI: FACS 0x000000001FFE0000 000040
[    0.002912] ACPI: APIC 0x000000001FFE231D 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002914] ACPI: HPET 0x000000001FFE23AD 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002915] ACPI: MCFG 0x000000001FFE23E5 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002917] ACPI: WAET 0x000000001FFE2421 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002918] ACPI: Reserving FACP table memory at [mem 0x1ffe2229-0x1ffe231c]
[    0.002919] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2228]
[    0.002920] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002920] ACPI: Reserving APIC table memory at [mem 0x1ffe231d-0x1ffe23ac]
[    0.002921] ACPI: Reserving HPET table memory at [mem 0x1ffe23ad-0x1ffe23e4]
[    0.002921] ACPI: Reserving MCFG table memory at [mem 0x1ffe23e5-0x1ffe2420]
[    0.002922] ACPI: Reserving WAET table memory at [mem 0x1ffe2421-0x1ffe2448]
[    0.002951] Zone ranges:
[    0.002951]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002952]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002953]   Normal   empty
[    0.002954] Movable zone start for each node
[    0.002954] Early memory node ranges
[    0.002955]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002956]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002956] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003058] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003078] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004840] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.005185] ACPI: PM-Timer IO Port: 0x608
[    0.005192] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.005213] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.005215] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.005216] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.005217] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.005218] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.005219] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.005221] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.005222] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.005223] TSC deadline timer available
[    0.005227] CPU topo: Max. logical packages:   1
[    0.005227] CPU topo: Max. logical dies:       1
[    0.005228] CPU topo: Max. dies per package:   1
[    0.005231] CPU topo: Max. threads per core:   1
[    0.005232] CPU topo: Num. cores per package:     4
[    0.005232] CPU topo: Num. threads per package:   4
[    0.005232] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.005242] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.005254] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.005254] Booting paravirtualized kernel on KVM
[    0.005255] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.005259] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.005418] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.005439] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.005485] random: crng init done
[    0.005500] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.005510] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.005533] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005684] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.006084] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.006098] ftrace: allocating 54035 entries in 212 pages
[    0.015963] ftrace: allocated 212 pages with 4 groups
[    0.015992] Dynamic Preempt: full
[    0.016110] rcu: Preemptible hierarchical RCU implementation.
[    0.016110] rcu: 	RCU event tracing is enabled.
[    0.016111] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.016112] 	All grace periods are expedited (rcu_expedited).
[    0.016112] 	Trampoline variant of Tasks RCU enabled.
[    0.016113] 	Rude variant of Tasks RCU enabled.
[    0.016113] 	Tracing variant of Tasks RCU enabled.
[    0.016114] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.016114] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.016119] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016120] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016121] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.020799] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.020982] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.021049] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.025407] Console: colour VGA+ 80x25
[    0.025445] printk: legacy console [ttyS0] enabled
[    0.145268] ACPI: Core revision 20240827
[    0.146007] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147598] APIC: Switch to symmetric I/O mode setup
[    0.148595] x2apic enabled
[    0.149314] APIC: Switched APIC routing to: physical x2apic
[    0.151178] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.152273] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.154058] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.156072] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.156980] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157060] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158060] Spectre V2 : Mitigation: Retpolines
[    0.159058] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.160058] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161059] Speculative Store Bypass: Vulnerable
[    0.162071] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.163059] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.164058] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.165059] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.166058] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.185712] Freeing SMP alternatives memory: 56K
[    0.186061] pid_max: default: 32768 minimum: 301
[    0.187074] LSM: initializing lsm=capability,landlock
[    0.188085] landlock: Up and running.
[    0.189078] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.190060] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.191253] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.192172] Performance Events: AMD PMU driver.
[    0.192936] ... version:                0
[    0.193061] ... bit width:              48
[    0.193782] ... generic registers:      4
[    0.194061] ... value mask:             0000ffffffffffff
[    0.194977] ... max period:             00007fffffffffff
[    0.195061] ... fixed-purpose events:   0
[    0.195767] ... event mask:             000000000000000f
[    0.196127] signal: max sigframe size: 1776
[    0.196859] rcu: Hierarchical SRCU implementation.
[    0.197061] rcu: 	Max phase no-delay instances is 400.
[    0.197964] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.198163] smp: Bringing up secondary CPUs ...
[    0.199004] smpboot: x86: Booting SMP configuration:
[    0.199064] .... node  #0, CPUs:      #1 #2 #3
[    0.233090] smp: Brought up 1 node, 4 CPUs
[    0.234762] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.235302] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5848K rodata, 3516K init, 2036K bss, 47760K reserved, 0K cma-reserved)
[    0.236219] devtmpfs: initialized
[    0.237101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.238062] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.239101] pinctrl core: initialized pinctrl subsystem
[    0.240771] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.241144] thermal_sys: Registered thermal governor 'step_wise'
[    0.241145] thermal_sys: Registered thermal governor 'user_space'
[    0.242070] cpuidle: using governor menu
[    0.243873] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.244063] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.245067] PCI: Using configuration type 1 for base access
[    0.246080] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.264017] raid6: sse2x4   gen() 23960 MB/s
[    0.281977] raid6: sse2x2   gen() 25860 MB/s
[    0.298264] raid6: sse2x1   gen()  6805 MB/s
[    0.299040] raid6: using algorithm sse2x2 gen() 25860 MB/s
[    0.316365] raid6: .... xor() 18465 MB/s, rmw enabled
[    0.317061] raid6: using ssse3x2 recovery algorithm
[    0.317989] ACPI: Added _OSI(Module Device)
[    0.319062] ACPI: Added _OSI(Processor Device)
[    0.319841] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.321061] ACPI: Added _OSI(Processor Aggregator Device)
[    0.322412] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.325151] ACPI: Interpreter enabled
[    0.326071] ACPI: PM: (supports S0 S3 S5)
[    0.326858] ACPI: Using IOAPIC for interrupt routing
[    0.327088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.328061] PCI: Using E820 reservations for host bridge windows
[    0.329109] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.331029] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.331066] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.332087] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.333087] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.334106] PCI host bridge to bus 0000:00
[    0.334900] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.335061] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.336061] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.337061] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.338060] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.339061] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.340061] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.341105] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.342513] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.344749] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.346061] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.350062] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.353061] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.354605] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.356061] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.358051] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.360999] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.362525] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.364524] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.367067] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.369022] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.370527] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.371104] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.372592] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.374061] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.376061] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.381061] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.383662] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.385496] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.386768] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.388680] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.389758] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.391610] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.392860] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.393453] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.395942] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.396419] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.397235] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.402350] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.403539] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.404854] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.406446] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.408764] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.409108] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.410104] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.411102] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.412101] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.413100] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.414101] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.415102] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.416079] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.417067] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.418064] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.419064] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.420063] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.421064] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.422064] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.423063] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.424254] iommu: Default domain type: Translated
[    0.425061] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.426103] SCSI subsystem initialized
[    0.426856] ACPI: bus type USB registered
[    0.427070] usbcore: registered new interface driver usbfs
[    0.428064] usbcore: registered new interface driver hub
[    0.429063] usbcore: registered new device driver usb
[    0.430070] pps_core: LinuxPPS API ver. 1 registered
[    0.431023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.431063] PTP clock support registered
[    0.432066] Bluetooth: Core ver 2.22
[    0.432756] NET: Registered PF_BLUETOOTH protocol family
[    0.433061] Bluetooth: HCI device and connection manager initialized
[    0.434062] Bluetooth: HCI socket layer initialized
[    0.435004] Bluetooth: L2CAP socket layer initialized
[    0.435062] Bluetooth: SCO socket layer initialized
[    0.436070] PCI: Using ACPI for IRQ routing
[    0.484638] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.485058] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.485058] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.485064] vgaarb: loaded
[    0.485632] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.486062] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.490112] clocksource: Switched to clocksource kvm-clock
[    0.491237] pnp: PnP ACPI init
[    0.491944] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.493455] pnp: PnP ACPI: found 5 devices
[    0.501269] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.503601] NET: Registered PF_INET protocol family
[    0.504609] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.506173] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.507837] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.509318] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.510811] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.512305] TCP: Hash tables configured (established 4096 bind 4096)
[    0.513538] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.514821] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.516175] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.517524] RPC: Registered named UNIX socket transport module.
[    0.518708] RPC: Registered udp transport module.
[    0.519622] RPC: Registered tcp transport module.
[    0.520512] RPC: Registered tcp-with-tls transport module.
[    0.521571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.522845] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.524051] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.525282] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.526588] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.527935] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.529254] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.530781] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.532192] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.534207] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.535543] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.536974] PCI: CLS 0 bytes, default 64
[    0.537812] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.540611] Initialise system trusted keyrings
[    0.541550] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.542952] NFS: Registering the id_resolver key type
[    0.543943] Key type id_resolver registered
[    0.544763] Key type id_legacy registered
[    0.545860] Key type cifs.idmap registered
[    0.553725] xor: automatically using best checksumming function   avx       
[    0.555075] Key type asymmetric registered
[    0.555872] Asymmetric key parser 'x509' registered
[    0.556827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.558232] io scheduler mq-deadline registered
[    0.559104] io scheduler kyber registered
[    0.559890] io scheduler bfq registered
[    0.560919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.563163] ACPI: button: Power Button [PWRF]
[    0.565351] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.567926] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.570463] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.576210] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.578476] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.580137] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.582059] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.584931] Linux agpgart interface v0.103
[    0.585956] ACPI: bus type drm_connector registered
[    0.587191] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.588450] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.592380] Console: switching to colour dummy device 80x25
[    0.594366] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.594368] [drm] features: -context_init
[    0.597390] [drm] number of scanouts: 1
[    0.598291] [drm] number of cap sets: 0
[    0.599597] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.602110] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.614092] Console: switching to colour frame buffer device 160x50
[    0.627322] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.631492] brd: module loaded
[    0.633351] loop: module loaded
[    0.634229] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.636656] virtio_blk virtio3: [vda] 1252340 512-byte logical blocks (641 MB/611 MiB)
[    0.640545] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.642432] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.643902] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.645982] scsi host0: ahci
[    0.646829] scsi host1: ahci
[    0.647730] scsi host2: ahci
[    0.648588] scsi host3: ahci
[    0.649432] scsi host4: ahci
[    0.650315] scsi host5: ahci
[    0.651033] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.652927] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.654844] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.656657] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.658502] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.660350] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.663432] e100: Intel(R) PRO/100 Network Driver
[    0.664627] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.665865] e1000: Intel(R) PRO/1000 Network Driver
[    0.666884] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.668136] e1000e: Intel(R) PRO/1000 Network Driver
[    0.669262] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.670566] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.671795] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.674254] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.675293] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.676684] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.683091] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.684277] hub 1-0:1.0: USB hub found
[    0.684915] hub 1-0:1.0: 6 ports detected
[    0.685725] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.686992] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.688834] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.690377] hub 2-0:1.0: USB hub found
[    0.691309] hub 2-0:1.0: 2 ports detected
[    0.692937] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.694190] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.696155] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.697629] hub 3-0:1.0: USB hub found
[    0.698499] hub 3-0:1.0: 2 ports detected
[    0.700224] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.701468] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.703319] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.704901] hub 4-0:1.0: USB hub found
[    0.705965] hub 4-0:1.0: 2 ports detected
[    0.707084] usbcore: registered new interface driver usb-storage
[    0.708524] usbcore: registered new interface driver usbserial_generic
[    0.710147] usbserial: USB Serial support registered for generic
[    0.711579] usbcore: registered new interface driver ftdi_sio
[    0.714014] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.715687] usbcore: registered new interface driver pl2303
[    0.716967] usbserial: USB Serial support registered for pl2303
[    0.718360] i8042: PNP: No PS/2 controller found.
[    0.719571] mousedev: PS/2 mouse device common for all mice
[    0.721010] rtc_cmos 00:03: RTC can wake from S4
[    0.722624] rtc_cmos 00:03: registered as rtc0
[    0.723759] rtc_cmos 00:03: setting system clock to 2025-04-25T15:00:12 UTC (1745593212)
[    0.725696] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.727640] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.727657] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.728708] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.730804] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.733642] sdhci: Secure Digital Host Controller Interface driver
[    0.735051] sdhci: Copyright(c) Pierre Ossman
[    0.736107] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.737502] usbcore: registered new interface driver usbhid
[    0.738869] usbhid: USB HID core driver
[    0.739793] u32 classifier
[    0.740290]     input device check on
[    0.740904]     Actions configured
[    0.741524] NET: Registered PF_INET6 protocol family
[    0.742579] Segment Routing with IPv6
[    0.743215] In-situ OAM (IOAM) with IPv6
[    0.743903] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.744977] NET: Registered PF_PACKET protocol family
[    0.745828] Bridge firewalling registered
[    0.746504] l2tp_core: L2TP core driver, V2.0
[    0.747244] Key type dns_resolver registered
[    0.748003] NET: Registered PF_VSOCK protocol family
[    0.749121] IPI shorthand broadcast: enabled
[    0.750555] sched_clock: Marking stable (621001225, 129070126)->(830062423, -79991072)
[    0.751949] registered taskstats version 1
[    0.752664] Loading compiled-in X.509 certificates
[    0.754093] Key type .fscrypt registered
[    0.754752] Key type fscrypt-provisioning registered
[    0.755719] Btrfs loaded, zoned=no, fsverity=no
[    0.757109] Key type encrypted registered
[    0.757858] printk: legacy console [netcon0] enabled
[    0.758776] netconsole: network logging started
[    0.925085] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.970866] ata6: SATA link down (SStatus 0 SControl 300)
[    0.972014] ata5: SATA link down (SStatus 0 SControl 300)
[    0.973366] ata2: SATA link down (SStatus 0 SControl 300)
[    0.974431] ata1: SATA link down (SStatus 0 SControl 300)
[    0.975478] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.976637] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.977597] ata3.00: applying bridge limits
[    0.978427] ata4: SATA link down (SStatus 0 SControl 300)
[    0.979419] ata3.00: configured for UDMA/100
[    0.980403] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.996248] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.997403] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.015082] IP-Config: Complete:
[    1.016751]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.018415]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.019391]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.019392]      nameserver0=8.8.8.8
[    1.021310] clk: Disabling unused clocks
[    1.022248] md: Waiting for all devices to be available before autodetect
[    1.023224] md: If you don't use raid, use raid=noautodetect
[    1.024041] md: Autodetecting RAID arrays.
[    1.024609] md: autorun ...
[    1.025000] md: ... autorun DONE.
[    1.028799] EXT4-fs (vda): mounted filesystem dffd6aac-27f3-4e66-988e-8b2130a83327 r/w with ordered data mode. Quota mode: disabled.
[    1.030489] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.031450] devtmpfs: mounted
[    1.032426] Freeing unused kernel image (initmem) memory: 3516K
[    1.033270] Write protecting the kernel read-only data: 26624k
[    1.034202] Freeing unused kernel image (rodata/data gap) memory: 296K
[    1.035147] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.063037] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.064797] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.077284] udevd[149]: starting version 3.2.14
[    1.082108] udevd[150]: starting eudev-3.2.14
[    1.178197] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.309490] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.362482] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.423148] EXT4-fs (vda): re-mounted dffd6aac-27f3-4e66-988e-8b2130a83327 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.118 [1;34m [seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.118 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.118 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCbmRugvRg6qWbj3hJCLrt98jKM7ydVzGd7dC8XCxStVFivZTyXFatM0F/DRoeE2YN7p/yvJCi7AhKLhwtuiSSPERqSxW2mVvCtgez1ItlXgRd0tGFJYHEk2McMKK/LiPDUoHunFLRn+gi2yeaNd7VZeS+iqnOL4FmOCOlu8Ax6ASjxNPPMwVtc7Vaap1xUpGELwX5JfOQ7tX0BlbHva4ynPF4ptRrZ8bAQDi2VOaVLIebE4VRmqpkkodc3Xly7tvidBZEEi6JZDEqUFPoweoEIKOQbNE3LEOwJJjifY4LByAsD5CikLFrKg+vv/ZjJF6Mr1YwkH/e9BAlEWpUjzlxH root@qemux86-64
Fingerprint: SHA256:EyJuc7HeGbaRBay6enKdhJU6h2bWYsnATnMeaJGFs6E
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.791314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.792868] Bluetooth: BNEP filters: protocol multicast
 * Starting Avahi mDNS/DNS-SD Da[    1.794132] Bluetooth: BNEP socket layer initialized
emon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
00:01:02.705 [1;34m [seatd/server.c:145] New client connected (pid: 5910, uid: 0, gid: 0)[0m
00:01:02.706 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:02.706 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
