[ 0.000000] Linux version 6.12.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Apr 14 02:03:29 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 757417102 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.002 MHz processor [ 0.000914] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000946] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000948] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000997] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002880] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004525] ACPI: Early table checksum verification disabled [ 0.004527] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.004533] ACPI: RSDT 0x000000007FFE2449 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004538] ACPI: FACP 0x000000007FFE2229 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004543] ACPI: DSDT 0x000000007FFE0040 0021E9 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004544] ACPI: FACS 0x000000007FFE0000 000040 [ 0.004546] ACPI: APIC 0x000000007FFE231D 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004547] ACPI: HPET 0x000000007FFE23AD 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004549] ACPI: MCFG 0x000000007FFE23E5 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004550] ACPI: WAET 0x000000007FFE2421 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004551] ACPI: Reserving FACP table memory at [mem 0x7ffe2229-0x7ffe231c] [ 0.004552] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2228] [ 0.004553] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.004553] ACPI: Reserving APIC table memory at [mem 0x7ffe231d-0x7ffe23ac] [ 0.004554] ACPI: Reserving HPET table memory at [mem 0x7ffe23ad-0x7ffe23e4] [ 0.004554] ACPI: Reserving MCFG table memory at [mem 0x7ffe23e5-0x7ffe2420] [ 0.004555] ACPI: Reserving WAET table memory at [mem 0x7ffe2421-0x7ffe2448] [ 0.004591] Zone ranges: [ 0.004591] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004592] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004593] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004594] Movable zone start for each node [ 0.004595] Early memory node ranges [ 0.004595] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004596] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.004597] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004598] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.005714] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005734] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.252066] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.252117] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.252493] ACPI: PM-Timer IO Port: 0x608 [ 0.252506] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.252534] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.252537] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.252538] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.252539] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.252540] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.252541] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.252543] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.252544] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.252548] TSC deadline timer available [ 0.252552] CPU topo: Max. logical packages: 1 [ 0.252552] CPU topo: Max. logical dies: 1 [ 0.252553] CPU topo: Max. dies per package: 1 [ 0.252556] CPU topo: Max. threads per core: 1 [ 0.252556] CPU topo: Num. cores per package: 4 [ 0.252557] CPU topo: Num. threads per package: 4 [ 0.252557] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.252572] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.252587] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.252588] Booting paravirtualized kernel on KVM [ 0.252590] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.252595] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.254816] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.254840] Kernel command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.254893] random: crng init done [ 0.330813] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.336801] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.336835] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.338701] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.338705] software IO TLB: area num 4. [ 0.338706] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.343946] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.343966] ftrace: allocating 54042 entries in 212 pages [ 0.354249] ftrace: allocated 212 pages with 4 groups [ 0.354286] Dynamic Preempt: full [ 0.397142] rcu: Preemptible hierarchical RCU implementation. [ 0.397144] rcu: RCU event tracing is enabled. [ 0.397145] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.397148] All grace periods are expedited (rcu_expedited). [ 0.397148] Trampoline variant of Tasks RCU enabled. [ 0.397149] Rude variant of Tasks RCU enabled. [ 0.397149] Tracing variant of Tasks RCU enabled. [ 0.397149] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.397150] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.397157] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.397158] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.397159] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.421892] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.422126] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.422201] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.426506] Console: colour VGA+ 80x25 [ 0.426543] printk: legacy console [ttyS0] enabled [ 0.548063] ACPI: Core revision 20240827 [ 0.548823] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.550342] APIC: Switch to symmetric I/O mode setup [ 0.551283] x2apic enabled [ 0.551984] APIC: Switched APIC routing to: physical x2apic [ 0.553793] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.554799] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3c1846cb, max_idle_ns: 440795218216 ns [ 0.556514] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750002) [ 0.557650] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.558514] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.559516] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.560515] Spectre V2 : Mitigation: Retpolines [ 0.561514] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.562514] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.563514] Speculative Store Bypass: Vulnerable [ 0.564269] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.564515] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.565514] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.566514] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.567514] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.588295] Freeing SMP alternatives memory: 56K [ 0.588518] pid_max: default: 32768 minimum: 301 [ 0.589531] LSM: initializing lsm=capability,landlock [ 0.590545] landlock: Up and running. [ 0.591267] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.591637] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.593034] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.593938] Performance Events: AMD PMU driver. [ 0.594519] ... version: 0 [ 0.595180] ... bit width: 48 [ 0.595517] ... generic registers: 4 [ 0.596165] ... value mask: 0000ffffffffffff [ 0.596517] ... max period: 00007fffffffffff [ 0.597390] ... fixed-purpose events: 0 [ 0.597516] ... event mask: 000000000000000f [ 0.598483] signal: max sigframe size: 1776 [ 0.598561] rcu: Hierarchical SRCU implementation. [ 0.599355] rcu: Max phase no-delay instances is 400. [ 0.599591] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.600775] smp: Bringing up secondary CPUs ... [ 0.603559] smpboot: x86: Booting SMP configuration: [ 0.604379] .... node #0, CPUs: #1 #2 #3 [ 0.643538] smp: Brought up 1 node, 4 CPUs [ 0.644518] smpboot: Total of 4 processors activated (22000.01 BogoMIPS) [ 0.645757] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5852K rodata, 3524K init, 2028K bss, 134056K reserved, 0K cma-reserved) [ 0.646624] devtmpfs: initialized [ 0.647553] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.648518] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.649617] pinctrl core: initialized pinctrl subsystem [ 0.652401] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.652646] thermal_sys: Registered thermal governor 'step_wise' [ 0.652648] thermal_sys: Registered thermal governor 'user_space' [ 0.653531] cpuidle: using governor menu [ 0.655315] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.655518] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.656525] PCI: Using configuration type 1 for base access [ 0.657552] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.677427] raid6: sse2x4 gen() 13160 MB/s [ 0.693563] raid6: sse2x2 gen() 13604 MB/s [ 0.710638] raid6: sse2x1 gen() 8847 MB/s [ 0.711386] raid6: using algorithm sse2x2 gen() 13604 MB/s [ 0.728924] raid6: .... xor() 19261 MB/s, rmw enabled [ 0.731518] raid6: using ssse3x2 recovery algorithm [ 0.732634] ACPI: Added _OSI(Module Device) [ 0.733519] ACPI: Added _OSI(Processor Device) [ 0.734446] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.735518] ACPI: Added _OSI(Processor Aggregator Device) [ 0.737204] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.740602] ACPI: Interpreter enabled [ 0.741281] ACPI: PM: (supports S0 S3 S5) [ 0.741518] ACPI: Using IOAPIC for interrupt routing [ 0.742428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.742517] PCI: Using E820 reservations for host bridge windows [ 0.743559] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.745380] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.745521] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.746542] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.747542] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.748559] PCI host bridge to bus 0000:00 [ 0.749346] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.749518] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.750516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.751516] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.752516] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.753516] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.754516] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.755495] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.756012] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.757517] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.759219] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.762517] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.765517] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.767090] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.768518] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.770017] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.774520] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.777011] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.779040] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.781521] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.783520] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.785964] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.786566] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.788256] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.790153] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.791517] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.796174] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.799127] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.801091] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.802264] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.803967] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.806349] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.807970] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.809238] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.809850] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.812339] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.812901] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.814629] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.818002] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.819517] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.821343] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.823298] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.824443] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.824563] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.825564] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.826566] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.827572] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.828559] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.829560] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.830565] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.831541] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.832527] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.833522] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.834524] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.835526] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.836524] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.837520] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.838524] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.839771] iommu: Default domain type: Translated [ 0.840517] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.841579] SCSI subsystem initialized [ 0.842234] ACPI: bus type USB registered [ 0.842528] usbcore: registered new interface driver usbfs [ 0.843439] usbcore: registered new interface driver hub [ 0.843519] usbcore: registered new device driver usb [ 0.844358] pps_core: LinuxPPS API ver. 1 registered [ 0.844516] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.845518] PTP clock support registered [ 0.846169] Bluetooth: Core ver 2.22 [ 0.846521] NET: Registered PF_BLUETOOTH protocol family [ 0.847422] Bluetooth: HCI device and connection manager initialized [ 0.847518] Bluetooth: HCI socket layer initialized [ 0.848329] Bluetooth: L2CAP socket layer initialized [ 0.848517] Bluetooth: SCO socket layer initialized [ 0.849360] PCI: Using ACPI for IRQ routing [ 0.897948] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.898513] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.898513] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.898519] vgaarb: loaded [ 0.899037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.899517] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.904602] clocksource: Switched to clocksource kvm-clock [ 0.906785] pnp: PnP ACPI init [ 0.907428] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.908802] pnp: PnP ACPI: found 5 devices [ 0.918230] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.919756] NET: Registered PF_INET protocol family [ 0.921816] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.924194] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.925657] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.926946] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.928306] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.930462] TCP: Hash tables configured (established 65536 bind 65536) [ 0.932899] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.934044] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.935284] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.936569] RPC: Registered named UNIX socket transport module. [ 0.937559] RPC: Registered udp transport module. [ 0.938332] RPC: Registered tcp transport module. [ 0.939123] RPC: Registered tcp-with-tls transport module. [ 0.940047] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.941160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.942184] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.943223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.944363] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.945507] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.947102] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.948468] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.949761] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.950995] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.952222] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.953544] PCI: CLS 0 bytes, default 64 [ 0.954236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.955308] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.956635] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3c1846cb, max_idle_ns: 440795218216 ns [ 0.959109] Initialise system trusted keyrings [ 0.959952] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.961151] NFS: Registering the id_resolver key type [ 0.962015] Key type id_resolver registered [ 0.962722] Key type id_legacy registered [ 0.963709] Key type cifs.idmap registered [ 0.971494] xor: automatically using best checksumming function avx [ 0.972695] Key type asymmetric registered [ 0.973364] Asymmetric key parser 'x509' registered [ 0.974187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.975403] io scheduler mq-deadline registered [ 0.976570] io scheduler kyber registered [ 0.977228] io scheduler bfq registered [ 0.978167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.980518] ACPI: button: Power Button [PWRF] [ 0.983067] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.987519] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.992159] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.998705] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.002617] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.006069] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.009504] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.014377] Linux agpgart interface v0.103 [ 1.016307] ACPI: bus type drm_connector registered [ 1.018623] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.020960] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.028479] Console: switching to colour dummy device 80x25 [ 1.031332] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.031333] [drm] features: -context_init [ 1.033743] [drm] number of scanouts: 1 [ 1.034388] [drm] number of cap sets: 0 [ 1.035351] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.040389] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.053277] Console: switching to colour frame buffer device 160x50 [ 1.069140] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.077036] brd: module loaded [ 1.079198] loop: module loaded [ 1.080485] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.084066] virtio_blk virtio3: [vda] 1018440 512-byte logical blocks (521 MB/497 MiB) [ 1.094750] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.097944] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.100664] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.104320] scsi host0: ahci [ 1.105537] scsi host1: ahci [ 1.106698] scsi host2: ahci [ 1.107856] scsi host3: ahci [ 1.108995] scsi host4: ahci [ 1.110149] scsi host5: ahci [ 1.111188] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.113991] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.116889] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.119665] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.122397] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.125167] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.129178] e100: Intel(R) PRO/100 Network Driver [ 1.130029] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.130943] e1000: Intel(R) PRO/1000 Network Driver [ 1.131755] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.132702] e1000e: Intel(R) PRO/1000 Network Driver [ 1.133518] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.134502] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.135370] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.136946] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.138345] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.139650] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.141936] hub 1-0:1.0: USB hub found [ 1.142591] hub 1-0:1.0: 2 ports detected [ 1.143403] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.144608] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.145975] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.152398] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.153496] hub 2-0:1.0: USB hub found [ 1.154132] hub 2-0:1.0: 6 ports detected [ 1.175476] hub 1-0:1.0: USB hub found [ 1.176331] hub 1-0:1.0: 2 ports detected [ 1.177315] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.180350] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.183865] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.186710] hub 3-0:1.0: USB hub found [ 1.188162] hub 3-0:1.0: 2 ports detected [ 1.190786] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.192712] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.195586] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.198223] hub 4-0:1.0: USB hub found [ 1.199883] hub 4-0:1.0: 2 ports detected [ 1.201979] usbcore: registered new interface driver usb-storage [ 1.204733] usbcore: registered new interface driver usbserial_generic [ 1.207707] usbserial: USB Serial support registered for generic [ 1.210363] usbcore: registered new interface driver ftdi_sio [ 1.212956] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.216342] usbcore: registered new interface driver pl2303 [ 1.218838] usbserial: USB Serial support registered for pl2303 [ 1.221503] i8042: PNP: No PS/2 controller found. [ 1.223697] mousedev: PS/2 mouse device common for all mice [ 1.226403] rtc_cmos 00:03: RTC can wake from S4 [ 1.229412] rtc_cmos 00:03: registered as rtc0 [ 1.231162] rtc_cmos 00:03: setting system clock to 2025-04-28T16:51:50 UTC (1745859110) [ 1.234511] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.238173] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.238212] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.239271] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.242732] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.247461] sdhci: Secure Digital Host Controller Interface driver [ 1.250438] sdhci: Copyright(c) Pierre Ossman [ 1.252569] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.255454] usbcore: registered new interface driver usbhid [ 1.258029] usbhid: USB HID core driver [ 1.259771] u32 classifier [ 1.260766] input device check on [ 1.262348] Actions configured [ 1.264033] NET: Registered PF_INET6 protocol family [ 1.266298] Segment Routing with IPv6 [ 1.267425] In-situ OAM (IOAM) with IPv6 [ 1.268187] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.269483] NET: Registered PF_PACKET protocol family [ 1.270449] Bridge firewalling registered [ 1.271235] l2tp_core: L2TP core driver, V2.0 [ 1.272089] Key type dns_resolver registered [ 1.272972] NET: Registered PF_VSOCK protocol family [ 1.274227] IPI shorthand broadcast: enabled [ 1.276804] sched_clock: Marking stable (1146001193, 130380352)->(1448243987, -171862442) [ 1.278460] registered taskstats version 1 [ 1.279427] Loading compiled-in X.509 certificates [ 1.281573] Key type .fscrypt registered [ 1.282419] Key type fscrypt-provisioning registered [ 1.284464] Btrfs loaded, zoned=no, fsverity=no [ 1.285940] Key type encrypted registered [ 1.286908] printk: legacy console [netcon0] enabled [ 1.288004] netconsole: network logging started [ 1.392412] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.438032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.439593] ata4: SATA link down (SStatus 0 SControl 300) [ 1.440771] ata1: SATA link down (SStatus 0 SControl 300) [ 1.441791] ata2: SATA link down (SStatus 0 SControl 300) [ 1.443233] ata6: SATA link down (SStatus 0 SControl 300) [ 1.446540] ata5: SATA link down (SStatus 0 SControl 300) [ 1.447484] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.448744] ata3.00: applying bridge limits [ 1.449903] ata3.00: configured for UDMA/100 [ 1.451357] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.475667] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.476796] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.498409] IP-Config: Complete: [ 1.499866] device=eth0, hwaddr=52:54:00:12:34:0e, ipaddr=192.168.7.14, mask=255.255.255.0, gw=192.168.7.13 [ 1.504297] host=192.168.7.14, domain=, nis-domain=(none) [ 1.506753] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.506756] nameserver0=8.8.8.8 [ 1.511633] clk: Disabling unused clocks [ 1.513856] md: Waiting for all devices to be available before autodetect [ 1.516199] md: If you don't use raid, use raid=noautodetect [ 1.518163] md: Autodetecting RAID arrays. [ 1.519602] md: autorun ... [ 1.520635] md: ... autorun DONE. [ 1.528569] EXT4-fs (vda): mounted filesystem 1567a529-dcf5-4d19-b569-4eb59bd2ba6b r/w with ordered data mode. Quota mode: disabled. [ 1.533487] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.535040] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.536235] devtmpfs: mounted [ 1.538049] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.541311] Freeing unused kernel image (initmem) memory: 3524K [ 1.543411] Write protecting the kernel read-only data: 26624k [ 1.545762] Freeing unused kernel image (rodata/data gap) memory: 292K [ 1.548084] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.592047] udevd[140]: starting version 3.2.14 [ 1.598409] udevd[141]: starting eudev-3.2.14 [ 1.653394] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.788308] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.840720] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.902081] EXT4-fs (vda): re-mounted 1567a529-dcf5-4d19-b569-4eb59bd2ba6b r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0 qemux86-64 login: