[    0.000000] Linux version 6.12.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Mon Apr 14 02:03:29 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 479214803 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000883] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000909] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000911] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002777] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002923] ACPI: Early table checksum verification disabled
[    0.002925] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002931] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002935] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002940] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002941] ACPI: FACS 0x000000001FFE0000 000040
[    0.002943] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002944] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002946] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002947] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002948] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002949] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002950] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002950] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002951] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002951] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002952] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.003005] Zone ranges:
[    0.003006]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003007]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003008]   Normal   empty
[    0.003008] Movable zone start for each node
[    0.003009] Early memory node ranges
[    0.003009]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003010]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003011] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.004633] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004654] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009018] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.009354] ACPI: PM-Timer IO Port: 0x608
[    0.009361] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.009383] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.009385] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.009386] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.009387] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.009388] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.009388] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.009390] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.009391] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.009393] TSC deadline timer available
[    0.009397] CPU topo: Max. logical packages:   1
[    0.009398] CPU topo: Max. logical dies:       1
[    0.009398] CPU topo: Max. dies per package:   1
[    0.009401] CPU topo: Max. threads per core:   1
[    0.009402] CPU topo: Num. cores per package:     4
[    0.009402] CPU topo: Num. threads per package:   4
[    0.009402] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.009412] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.009424] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.009425] Booting paravirtualized kernel on KVM
[    0.009426] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.009430] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.011245] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.011269] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.011317] random: crng init done
[    0.011681] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.011872] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.011915] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.015185] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.016483] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.016497] ftrace: allocating 54042 entries in 212 pages
[    0.025476] ftrace: allocated 212 pages with 4 groups
[    0.025501] Dynamic Preempt: full
[    0.027533] rcu: Preemptible hierarchical RCU implementation.
[    0.027533] rcu: 	RCU event tracing is enabled.
[    0.027534] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.027535] 	All grace periods are expedited (rcu_expedited).
[    0.027536] 	Trampoline variant of Tasks RCU enabled.
[    0.027536] 	Rude variant of Tasks RCU enabled.
[    0.027536] 	Tracing variant of Tasks RCU enabled.
[    0.027537] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.027537] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.027542] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.027543] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.027544] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.033226] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.033408] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.033468] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.037565] Console: colour VGA+ 80x25
[    0.037600] printk: legacy console [ttyS0] enabled
[    0.140333] ACPI: Core revision 20240827
[    0.141035] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.142447] APIC: Switch to symmetric I/O mode setup
[    0.143328] x2apic enabled
[    0.143980] APIC: Switched APIC routing to: physical x2apic
[    0.145700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.146619] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.148655] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.149761] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.150656] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.151657] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.152657] Spectre V2 : Mitigation: Retpolines
[    0.153655] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.154655] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.155656] Speculative Store Bypass: Vulnerable
[    0.156666] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.157656] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.158656] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.159656] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.160655] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.179413] Freeing SMP alternatives memory: 56K
[    0.179658] pid_max: default: 32768 minimum: 301
[    0.180666] LSM: initializing lsm=capability,landlock
[    0.181663] landlock: Up and running.
[    0.182245] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.182656] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.184703] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.185761] Performance Events: AMD PMU driver.
[    0.186477] ... version:                0
[    0.186658] ... bit width:              48
[    0.187293] ... generic registers:      4
[    0.187657] ... value mask:             0000ffffffffffff
[    0.188475] ... max period:             00007fffffffffff
[    0.188657] ... fixed-purpose events:   0
[    0.189269] ... event mask:             000000000000000f
[    0.189738] signal: max sigframe size: 1776
[    0.190410] rcu: Hierarchical SRCU implementation.
[    0.190658] rcu: 	Max phase no-delay instances is 400.
[    0.191465] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.191778] smp: Bringing up secondary CPUs ...
[    0.192523] smpboot: x86: Booting SMP configuration:
[    0.192660] .... node  #0, CPUs:      #1 #2 #3
[    0.226688] smp: Brought up 1 node, 4 CPUs
[    0.227658] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.228860] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5852K rodata, 3524K init, 2028K bss, 47760K reserved, 0K cma-reserved)
[    0.241689] devtmpfs: initialized
[    0.242319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.242661] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.243679] pinctrl core: initialized pinctrl subsystem
[    0.244821] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.245768] thermal_sys: Registered thermal governor 'step_wise'
[    0.245769] thermal_sys: Registered thermal governor 'user_space'
[    0.246668] cpuidle: using governor menu
[    0.247782] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.248660] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.249667] PCI: Using configuration type 1 for base access
[    0.250575] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.267658] raid6: sse2x4   gen() 26882 MB/s
[    0.284658] raid6: sse2x2   gen() 25855 MB/s
[    0.301658] raid6: sse2x1   gen()  7842 MB/s
[    0.302470] raid6: using algorithm sse2x4 gen() 26882 MB/s
[    0.319658] raid6: .... xor() 3226 MB/s, rmw enabled
[    0.320424] raid6: using ssse3x2 recovery algorithm
[    0.320711] ACPI: Added _OSI(Module Device)
[    0.321359] ACPI: Added _OSI(Processor Device)
[    0.321658] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.322369] ACPI: Added _OSI(Processor Aggregator Device)
[    0.323049] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.324239] ACPI: Interpreter enabled
[    0.324666] ACPI: PM: (supports S0 S3 S5)
[    0.325287] ACPI: Using IOAPIC for interrupt routing
[    0.325671] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.326657] PCI: Using E820 reservations for host bridge windows
[    0.327700] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.329377] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.329661] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.330679] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.331649] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.331692] PCI host bridge to bus 0000:00
[    0.332331] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.332658] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.333658] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.334657] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.335657] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.336657] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.337658] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.338534] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.339072] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.340658] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.342308] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.346416] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.347540] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.348137] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.349658] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.351209] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.354659] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.356949] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.358660] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.363108] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.364660] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.366660] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.367660] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.369147] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.371431] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.372658] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.376658] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.380217] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.382062] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.383362] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.384919] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.386471] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.388565] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.389343] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.390005] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.392777] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.394012] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.394823] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.397906] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.399161] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.400434] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.403658] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.405141] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.405703] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.406682] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.407636] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.407698] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.408662] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.409607] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.409701] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.410626] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.410662] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.411570] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.411661] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.412585] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.412661] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.413579] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.413661] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.414772] iommu: Default domain type: Translated
[    0.415517] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.415703] SCSI subsystem initialized
[    0.416285] ACPI: bus type USB registered
[    0.416666] usbcore: registered new interface driver usbfs
[    0.417501] usbcore: registered new interface driver hub
[    0.417660] usbcore: registered new device driver usb
[    0.418433] pps_core: LinuxPPS API ver. 1 registered
[    0.418657] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.419659] PTP clock support registered
[    0.420267] Bluetooth: Core ver 2.22
[    0.420666] NET: Registered PF_BLUETOOTH protocol family
[    0.421477] Bluetooth: HCI device and connection manager initialized
[    0.421659] Bluetooth: HCI socket layer initialized
[    0.422395] Bluetooth: L2CAP socket layer initialized
[    0.422661] Bluetooth: SCO socket layer initialized
[    0.429685] PCI: Using ACPI for IRQ routing
[    0.474747] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.475612] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.475655] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.475660] vgaarb: loaded
[    0.476110] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.476658] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.481698] clocksource: Switched to clocksource kvm-clock
[    0.483038] pnp: PnP ACPI init
[    0.483627] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.484860] pnp: PnP ACPI: found 5 devices
[    0.491813] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.493621] NET: Registered PF_INET protocol family
[    0.494461] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.495757] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.497076] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.498276] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.499482] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.500686] TCP: Hash tables configured (established 4096 bind 4096)
[    0.501734] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.502748] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.503835] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.504908] RPC: Registered named UNIX socket transport module.
[    0.505829] RPC: Registered udp transport module.
[    0.506556] RPC: Registered tcp transport module.
[    0.507285] RPC: Registered tcp-with-tls transport module.
[    0.508117] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.509109] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.510059] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.511013] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.512064] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.513115] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.514166] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.515397] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.516627] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.517759] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.518905] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.520120] PCI: CLS 0 bytes, default 64
[    0.520804] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.524294] Initialise system trusted keyrings
[    0.525058] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.526250] NFS: Registering the id_resolver key type
[    0.527042] Key type id_resolver registered
[    0.527709] Key type id_legacy registered
[    0.528858] Key type cifs.idmap registered
[    0.536552] xor: automatically using best checksumming function   avx       
[    0.537654] Key type asymmetric registered
[    0.538293] Asymmetric key parser 'x509' registered
[    0.539047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.540191] io scheduler mq-deadline registered
[    0.540897] io scheduler kyber registered
[    0.541534] io scheduler bfq registered
[    0.542339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.544308] ACPI: button: Power Button [PWRF]
[    0.553020] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.554727] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.556386] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.559969] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.562471] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.563625] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.565065] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.567534] Linux agpgart interface v0.103
[    0.568257] ACPI: bus type drm_connector registered
[    0.569104] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.569987] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.572852] Console: switching to colour dummy device 80x25
[    0.573890] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.573891] [drm] features: -context_init
[    0.575969] [drm] number of scanouts: 1
[    0.576596] [drm] number of cap sets: 0
[    0.577447] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.584224] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.596338] Console: switching to colour frame buffer device 160x50
[    0.604251] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.608506] brd: module loaded
[    0.614214] loop: module loaded
[    0.615155] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.616959] virtio_blk virtio3: [vda] 1271934 512-byte logical blocks (651 MB/621 MiB)
[    0.620107] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.622263] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.623409] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.625150] scsi host0: ahci
[    0.625916] scsi host1: ahci
[    0.626577] scsi host2: ahci
[    0.627256] scsi host3: ahci
[    0.627857] scsi host4: ahci
[    0.628454] scsi host5: ahci
[    0.628932] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.630344] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.631605] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.632864] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.634116] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.635384] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.637768] e100: Intel(R) PRO/100 Network Driver
[    0.638553] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.639395] e1000: Intel(R) PRO/1000 Network Driver
[    0.640135] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.641016] e1000e: Intel(R) PRO/1000 Network Driver
[    0.641781] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.642701] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.643531] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.644796] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.645842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.647055] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.648216] hub 1-0:1.0: USB hub found
[    0.648805] hub 1-0:1.0: 2 ports detected
[    0.649627] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.650750] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.652154] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.659262] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.660371] hub 2-0:1.0: USB hub found
[    0.660997] hub 2-0:1.0: 6 ports detected
[    0.682317] hub 1-0:1.0: USB hub found
[    0.682961] hub 1-0:1.0: 2 ports detected
[    0.683732] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.684656] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.685908] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.687002] hub 3-0:1.0: USB hub found
[    0.687610] hub 3-0:1.0: 2 ports detected
[    0.688836] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.689673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.690887] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.691945] hub 4-0:1.0: USB hub found
[    0.692545] hub 4-0:1.0: 2 ports detected
[    0.693245] usbcore: registered new interface driver usb-storage
[    0.694175] usbcore: registered new interface driver usbserial_generic
[    0.695175] usbserial: USB Serial support registered for generic
[    0.696097] usbcore: registered new interface driver ftdi_sio
[    0.697047] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.698301] usbcore: registered new interface driver pl2303
[    0.699154] usbserial: USB Serial support registered for pl2303
[    0.700084] i8042: PNP: No PS/2 controller found.
[    0.700863] mousedev: PS/2 mouse device common for all mice
[    0.701814] rtc_cmos 00:03: RTC can wake from S4
[    0.702901] rtc_cmos 00:03: registered as rtc0
[    0.703653] rtc_cmos 00:03: setting system clock to 2025-05-04T11:25:02 UTC (1746357902)
[    0.704955] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.706327] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.706595] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.707455] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.708887] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.711199] sdhci: Secure Digital Host Controller Interface driver
[    0.712141] sdhci: Copyright(c) Pierre Ossman
[    0.712850] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.713781] usbcore: registered new interface driver usbhid
[    0.714644] usbhid: USB HID core driver
[    0.715259] u32 classifier
[    0.715673]     input device check on
[    0.716235]     Actions configured
[    0.716807] NET: Registered PF_INET6 protocol family
[    0.717853] Segment Routing with IPv6
[    0.718474] In-situ OAM (IOAM) with IPv6
[    0.719090] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.720084] NET: Registered PF_PACKET protocol family
[    0.720882] Bridge firewalling registered
[    0.721521] l2tp_core: L2TP core driver, V2.0
[    0.722198] Key type dns_resolver registered
[    0.722900] NET: Registered PF_VSOCK protocol family
[    0.724018] IPI shorthand broadcast: enabled
[    0.725735] sched_clock: Marking stable (614001040, 111240992)->(799503401, -74261369)
[    0.727055] registered taskstats version 1
[    0.727734] Loading compiled-in X.509 certificates
[    0.729318] Key type .fscrypt registered
[    0.729925] Key type fscrypt-provisioning registered
[    0.730840] Btrfs loaded, zoned=no, fsverity=no
[    0.732107] Key type encrypted registered
[    0.732833] printk: legacy console [netcon0] enabled
[    0.733613] netconsole: network logging started
[    0.896280] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.942129] ata2: SATA link down (SStatus 0 SControl 300)
[    0.943133] ata6: SATA link down (SStatus 0 SControl 300)
[    0.944198] ata5: SATA link down (SStatus 0 SControl 300)
[    0.945220] ata4: SATA link down (SStatus 0 SControl 300)
[    0.946204] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.947292] ata1: SATA link down (SStatus 0 SControl 300)
[    0.948224] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.949092] ata3.00: applying bridge limits
[    0.949824] ata3.00: configured for UDMA/100
[    0.950748] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.978406] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.979477] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.001249] IP-Config: Complete:
[    1.002465]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.004026]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.004947]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.004948]      nameserver0=8.8.8.8
[    1.006733] clk: Disabling unused clocks
[    1.007625] md: Waiting for all devices to be available before autodetect
[    1.008493] md: If you don't use raid, use raid=noautodetect
[    1.009201] md: Autodetecting RAID arrays.
[    1.009723] md: autorun ...
[    1.010249] md: ... autorun DONE.
[    1.012684] EXT4-fs (vda): mounted filesystem b14154b0-1c35-45e6-baa4-1aa06bf71d0c r/w with ordered data mode. Quota mode: disabled.
[    1.014176] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.014973] devtmpfs: mounted
[    1.015944] Freeing unused kernel image (initmem) memory: 3524K
[    1.016704] Write protecting the kernel read-only data: 26624k
[    1.017605] Freeing unused kernel image (rodata/data gap) memory: 292K
[    1.018548] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.027110] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.028680] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.071089] udevd[150]: starting version 3.2.14
[    1.074874] udevd[151]: starting eudev-3.2.14
[    1.141273] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.273564] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.325605] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.385545] EXT4-fs (vda): re-mounted b14154b0-1c35-45e6-baa4-1aa06bf71d0c r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.133 [1;34m [seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.133 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.137 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCP4QoVtJo7g1/0hnmzmB25fnzkrFENFr9iGWZSDLJixthKML3tMaPSvZ9c2pbR2Eo5qBmOOI2csOT02ImKmlrwPC0XOPUtNyV9Nsr7+MuFYGWW/+lzID9B8gUEp7LgbQUljEsaJDCLLvijnPkoTKK+mLTkCUQC5pdHZnEu4eOoBEOSc+rKjz4UwJsAFzPNG76WED7qdx7rPHHYSlDpqzPgYTgmXg5oiLq7wJfE2zY04BS0gkWSo1aeS2ff+lGC3G38hdt9YXtMKsuu1YgBgfa/jnz5VmfL3mz7VHZ1xpzsye/NnZ0/UkRWePpswYd6JMQpFSVXSRlnF8YM5ee4ftkb root@qemux86-64
Fingerprint: SHA256:TftnDRSKxyOHIM3SGs66z8pv+YnNPZeDxQSJ4Cm3qIA
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.899280] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.900019] Bluetooth: BNEP filters: protocol multicast
[    1.900022] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
00:01:06.760 [1;34m [seatd/server.c:145] New client connected (pid: 5910, uid: 0, gid: 0)[0m
00:01:06.761 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:06.761 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
