[    0.000000] Linux version 6.12.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Mon Apr 14 02:03:29 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 353879603 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.996 MHz processor
[    0.000887] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000913] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000916] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002787] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002913] ACPI: Early table checksum verification disabled
[    0.002915] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002920] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002924] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002928] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002929] ACPI: FACS 0x000000001FFE0000 000040
[    0.002931] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002932] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002934] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002935] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002936] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002937] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002938] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002938] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002939] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002939] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002940] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.002965] Zone ranges:
[    0.002965]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002966]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002967]   Normal   empty
[    0.002968] Movable zone start for each node
[    0.002968] Early memory node ranges
[    0.002968]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002969]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002970] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003049] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003070] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003894] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004211] ACPI: PM-Timer IO Port: 0x608
[    0.004218] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004238] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004240] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004241] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004242] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004242] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004243] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004245] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004246] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004247] TSC deadline timer available
[    0.004250] CPU topo: Max. logical packages:   1
[    0.004251] CPU topo: Max. logical dies:       1
[    0.004251] CPU topo: Max. dies per package:   1
[    0.004254] CPU topo: Max. threads per core:   1
[    0.004255] CPU topo: Num. cores per package:     4
[    0.004255] CPU topo: Num. threads per package:   4
[    0.004255] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004264] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004274] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004274] Booting paravirtualized kernel on KVM
[    0.004275] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004278] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004418] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004437] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004481] random: crng init done
[    0.004496] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004505] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004529] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004663] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005050] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005063] ftrace: allocating 54042 entries in 212 pages
[    0.013696] ftrace: allocated 212 pages with 4 groups
[    0.013719] Dynamic Preempt: full
[    0.013817] rcu: Preemptible hierarchical RCU implementation.
[    0.013817] rcu: 	RCU event tracing is enabled.
[    0.013818] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.013819] 	All grace periods are expedited (rcu_expedited).
[    0.013819] 	Trampoline variant of Tasks RCU enabled.
[    0.013819] 	Rude variant of Tasks RCU enabled.
[    0.013820] 	Tracing variant of Tasks RCU enabled.
[    0.013820] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.013821] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.013824] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013825] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013826] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018409] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018584] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018638] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.022876] Console: colour VGA+ 80x25
[    0.022909] printk: legacy console [ttyS0] enabled
[    0.153859] ACPI: Core revision 20240827
[    0.154574] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.156209] APIC: Switch to symmetric I/O mode setup
[    0.157108] x2apic enabled
[    0.157804] APIC: Switched APIC routing to: physical x2apic
[    0.159625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.160655] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.162357] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996)
[    0.164476] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.165332] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.165360] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.166357] Spectre V2 : Mitigation: Retpolines
[    0.167357] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.168357] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.168358] Speculative Store Bypass: Vulnerable
[    0.169073] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.170358] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.171357] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.172358] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.173358] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.174357] Freeing SMP alternatives memory: 56K
[    0.175360] pid_max: default: 32768 minimum: 301
[    0.176364] LSM: initializing lsm=capability,landlock
[    0.177381] landlock: Up and running.
[    0.178366] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.179357] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.180531] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.181469] Performance Events: AMD PMU driver.
[    0.182259] ... version:                0
[    0.182360] ... bit width:              48
[    0.183052] ... generic registers:      4
[    0.183360] ... value mask:             0000ffffffffffff
[    0.184243] ... max period:             00007fffffffffff
[    0.184360] ... fixed-purpose events:   0
[    0.185080] ... event mask:             000000000000000f
[    0.185428] signal: max sigframe size: 1776
[    0.186157] rcu: Hierarchical SRCU implementation.
[    0.186362] rcu: 	Max phase no-delay instances is 400.
[    0.187240] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.187483] smp: Bringing up secondary CPUs ...
[    0.188275] smpboot: x86: Booting SMP configuration:
[    0.188363] .... node  #0, CPUs:      #1 #2 #3
[    0.223408] smp: Brought up 1 node, 4 CPUs
[    0.225060] smpboot: Total of 4 processors activated (21999.96 BogoMIPS)
[    0.225781] Memory: 471744K/523736K available (20480K kernel code, 2446K rwdata, 5852K rodata, 3524K init, 2028K bss, 47764K reserved, 0K cma-reserved)
[    0.226534] devtmpfs: initialized
[    0.227399] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.228361] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.229397] pinctrl core: initialized pinctrl subsystem
[    0.231085] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.231440] thermal_sys: Registered thermal governor 'step_wise'
[    0.231441] thermal_sys: Registered thermal governor 'user_space'
[    0.232365] cpuidle: using governor menu
[    0.234085] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.234363] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.235366] PCI: Using configuration type 1 for base access
[    0.236271] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.253362] raid6: sse2x4   gen() 26894 MB/s
[    0.270361] raid6: sse2x2   gen() 25155 MB/s
[    0.287365] raid6: sse2x1   gen()  8529 MB/s
[    0.288103] raid6: using algorithm sse2x4 gen() 26894 MB/s
[    0.305363] raid6: .... xor() 3528 MB/s, rmw enabled
[    0.306160] raid6: using ssse3x2 recovery algorithm
[    0.306418] ACPI: Added _OSI(Module Device)
[    0.307141] ACPI: Added _OSI(Processor Device)
[    0.307361] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.308360] ACPI: Added _OSI(Processor Aggregator Device)
[    0.309615] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.311421] ACPI: Interpreter enabled
[    0.312003] ACPI: PM: (supports S0 S3 S5)
[    0.312361] ACPI: Using IOAPIC for interrupt routing
[    0.313139] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.313360] PCI: Using E820 reservations for host bridge windows
[    0.314408] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.316138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.316364] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.317385] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.318372] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.319396] PCI host bridge to bus 0000:00
[    0.320020] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.320360] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.321360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.322360] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.323359] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.324360] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.325360] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.326345] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.326782] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.328361] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.330360] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.334935] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.336360] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.337843] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.339360] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.341261] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.343360] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.345664] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.348356] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.353363] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.355362] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.357775] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.359396] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.360848] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.362361] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.364360] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.369360] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.371909] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.373754] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.375018] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.377951] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.379038] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.380640] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.382038] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.382704] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.386434] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.387694] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.388539] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.391597] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.394360] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.396210] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.397718] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.399089] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.399405] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.400401] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.401415] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.402377] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.403345] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.403400] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.404376] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.405378] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.406309] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.406363] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.407317] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.407364] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.408290] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.408364] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.409306] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.409544] iommu: Default domain type: Translated
[    0.410333] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.410407] SCSI subsystem initialized
[    0.411048] ACPI: bus type USB registered
[    0.411368] usbcore: registered new interface driver usbfs
[    0.412195] usbcore: registered new interface driver hub
[    0.412363] usbcore: registered new device driver usb
[    0.413163] pps_core: LinuxPPS API ver. 1 registered
[    0.413360] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.414362] PTP clock support registered
[    0.414987] Bluetooth: Core ver 2.22
[    0.415367] NET: Registered PF_BLUETOOTH protocol family
[    0.416163] Bluetooth: HCI device and connection manager initialized
[    0.416361] Bluetooth: HCI socket layer initialized
[    0.417106] Bluetooth: L2CAP socket layer initialized
[    0.417361] Bluetooth: SCO socket layer initialized
[    0.418157] PCI: Using ACPI for IRQ routing
[    0.463166] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.463342] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.463357] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.463363] vgaarb: loaded
[    0.463831] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.464359] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.469414] clocksource: Switched to clocksource kvm-clock
[    0.470350] pnp: PnP ACPI init
[    0.470879] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.472135] pnp: PnP ACPI: found 5 devices
[    0.479162] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.480577] NET: Registered PF_INET protocol family
[    0.481365] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.482666] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.484091] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.485317] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.486517] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.487637] TCP: Hash tables configured (established 4096 bind 4096)
[    0.488641] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.489658] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.490756] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.491860] RPC: Registered named UNIX socket transport module.
[    0.492757] RPC: Registered udp transport module.
[    0.493498] RPC: Registered tcp transport module.
[    0.494233] RPC: Registered tcp-with-tls transport module.
[    0.495115] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.496167] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.497992] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.499067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.500148] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.501209] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.502315] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.503544] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.504861] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.505993] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.507137] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.508477] PCI: CLS 0 bytes, default 64
[    0.509175] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.511804] Initialise system trusted keyrings
[    0.512585] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.513761] NFS: Registering the id_resolver key type
[    0.514552] Key type id_resolver registered
[    0.515216] Key type id_legacy registered
[    0.516196] Key type cifs.idmap registered
[    0.523972] xor: automatically using best checksumming function   avx       
[    0.525070] Key type asymmetric registered
[    0.525691] Asymmetric key parser 'x509' registered
[    0.526530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.528455] io scheduler mq-deadline registered
[    0.529170] io scheduler kyber registered
[    0.529810] io scheduler bfq registered
[    0.530664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.532927] ACPI: button: Power Button [PWRF]
[    0.535624] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.539934] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.544150] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.552497] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.556484] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.560076] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.563433] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.568492] Linux agpgart interface v0.103
[    0.570365] ACPI: bus type drm_connector registered
[    0.572544] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.574840] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.582009] Console: switching to colour dummy device 80x25
[    0.584597] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.584600] [drm] features: -context_init
[    0.590860] [drm] number of scanouts: 1
[    0.592453] [drm] number of cap sets: 0
[    0.594432] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.598846] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.627637] Console: switching to colour frame buffer device 160x50
[    0.655434] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.661959] brd: module loaded
[    0.664460] loop: module loaded
[    0.666055] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.670503] virtio_blk virtio3: [vda] 1271944 512-byte logical blocks (651 MB/621 MiB)
[    0.677566] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.681195] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.684063] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.688040] scsi host0: ahci
[    0.689728] scsi host1: ahci
[    0.691252] scsi host2: ahci
[    0.692809] scsi host3: ahci
[    0.694345] scsi host4: ahci
[    0.695909] scsi host5: ahci
[    0.697273] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.700723] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.704125] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.707498] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.710861] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.714289] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.720293] e100: Intel(R) PRO/100 Network Driver
[    0.722291] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.724556] e1000: Intel(R) PRO/1000 Network Driver
[    0.726564] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.728901] e1000e: Intel(R) PRO/1000 Network Driver
[    0.730924] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.733304] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.735512] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.739565] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.742652] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.745907] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.748562] hub 1-0:1.0: USB hub found
[    0.750261] hub 1-0:1.0: 2 ports detected
[    0.752291] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.755109] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.758425] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.766822] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.769393] hub 2-0:1.0: USB hub found
[    0.770972] hub 2-0:1.0: 6 ports detected
[    0.794005] hub 1-0:1.0: USB hub found
[    0.795740] hub 1-0:1.0: 2 ports detected
[    0.797595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.799902] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.803265] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.805931] hub 3-0:1.0: USB hub found
[    0.807595] hub 3-0:1.0: 2 ports detected
[    0.813697] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.815972] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.819320] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.821988] hub 4-0:1.0: USB hub found
[    0.823608] hub 4-0:1.0: 2 ports detected
[    0.825486] usbcore: registered new interface driver usb-storage
[    0.828151] usbcore: registered new interface driver usbserial_generic
[    0.830809] usbserial: USB Serial support registered for generic
[    0.833308] usbcore: registered new interface driver ftdi_sio
[    0.835666] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.838667] usbcore: registered new interface driver pl2303
[    0.840958] usbserial: USB Serial support registered for pl2303
[    0.843424] i8042: PNP: No PS/2 controller found.
[    0.845466] mousedev: PS/2 mouse device common for all mice
[    0.847920] rtc_cmos 00:03: RTC can wake from S4
[    0.850707] rtc_cmos 00:03: registered as rtc0
[    0.852837] rtc_cmos 00:03: setting system clock to 2025-05-07T08:29:28 UTC (1746606568)
[    0.856212] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.859576] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.859994] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.863442] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.865958] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.868875] sdhci: Secure Digital Host Controller Interface driver
[    0.874431] sdhci: Copyright(c) Pierre Ossman
[    0.876235] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.880870] usbcore: registered new interface driver usbhid
[    0.883170] usbhid: USB HID core driver
[    0.884715] u32 classifier
[    0.885858]     input device check on
[    0.887318]     Actions configured
[    0.888817] NET: Registered PF_INET6 protocol family
[    0.891230] Segment Routing with IPv6
[    0.892841] In-situ OAM (IOAM) with IPv6
[    0.894450] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.897031] NET: Registered PF_PACKET protocol family
[    0.899137] Bridge firewalling registered
[    0.900843] l2tp_core: L2TP core driver, V2.0
[    0.902711] Key type dns_resolver registered
[    0.904583] NET: Registered PF_VSOCK protocol family
[    0.907216] IPI shorthand broadcast: enabled
[    0.911003] sched_clock: Marking stable (770008051, 140767777)->(1004275856, -93500028)
[    0.914426] registered taskstats version 1
[    0.916138] Loading compiled-in X.509 certificates
[    0.919614] Key type .fscrypt registered
[    0.921234] Key type fscrypt-provisioning registered
[    0.923561] Btrfs loaded, zoned=no, fsverity=no
[    0.926250] Key type encrypted registered
[    0.928102] printk: legacy console [netcon0] enabled
[    0.930149] netconsole: network logging started
[    1.008812] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.028994] ata6: SATA link down (SStatus 0 SControl 300)
[    1.031672] ata1: SATA link down (SStatus 0 SControl 300)
[    1.034358] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.037326] ata5: SATA link down (SStatus 0 SControl 300)
[    1.039796] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.042152] ata3.00: applying bridge limits
[    1.044146] ata4: SATA link down (SStatus 0 SControl 300)
[    1.046721] ata2: SATA link down (SStatus 0 SControl 300)
[    1.049130] ata3.00: configured for UDMA/100
[    1.051414] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.078130] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.081040] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.100802] IP-Config: Complete:
[    1.102181]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.106252]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.108542]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.108545]      nameserver0=8.8.8.8
[    1.113113] clk: Disabling unused clocks
[    1.115265] md: Waiting for all devices to be available before autodetect
[    1.117537] md: If you don't use raid, use raid=noautodetect
[    1.119415] md: Autodetecting RAID arrays.
[    1.120790] md: autorun ...
[    1.121698] md: ... autorun DONE.
[    1.127544] EXT4-fs (vda): mounted filesystem 44b55a51-7f31-4407-bc8f-0bb00b9110e2 r/w with ordered data mode. Quota mode: disabled.
[    1.133804] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.135926] devtmpfs: mounted
[    1.138124] Freeing unused kernel image (initmem) memory: 3524K
[    1.140283] Write protecting the kernel read-only data: 26624k
[    1.143192] Freeing unused kernel image (rodata/data gap) memory: 292K
[    1.143325] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.145386] Run /sbin/init as init process
[    1.149211] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.225685] udevd[150]: starting version 3.2.14
[    1.233174] udevd[151]: starting eudev-3.2.14
[    1.265808] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.402199] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.457686] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.524902] EXT4-fs (vda): re-mounted 44b55a51-7f31-4407-bc8f-0bb00b9110e2 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.130 [1;34m [seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.130 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.130 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCH0nqxC34kKEvVfB0UcLjPnLx2aRUuBZQXHPKOmODVuJcCYcy/1JEYB5FeM217WqGE9wC+GlX0JVioErYXDEavdDTEulLpf0JGZS8WEuVtFvc7ltwx/IxJ7unNEcDhRWFFONbLSnwcJqaksSf1hhGmYIIhF9ai2nh800tHclswDm7TGeiSsprc669JRM7vEfoc/ZvQ0WKXYLUGqQYWkwDOBbsM0C1vOdlaaXKdT3UX1zLG714H9aT9dfL9EJQFh95P4KGLX3Y0xpzv2Wkx6A6mrHvTrZ3DMLUhnlraAtdqghAsQ4fq0/Q8U+jfrIljvPCNYmhyNGvn4OEQuweI4klb root@qemux86-64
Fingerprint: SHA256:f9V12fK4Ry/QxnsqwLCs/jWSVP2o0/H8VJUFTBjF2KE
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.000386] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.003272] Bluetooth: BNEP filters: protocol multicast
[    2.005258] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
00:01:10.682 [1;34m [seatd/server.c:145] New client connected (pid: 5909, uid: 0, gid: 0)[0m
00:01:10.682 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:10.683 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
