[ 0.000000] Linux version 6.12.23-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Mon Apr 14 02:03:29 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 457673816 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2749.996 MHz processor [ 0.000856] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000886] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000889] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000935] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002758] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.002899] ACPI: Early table checksum verification disabled [ 0.002901] ACPI: RSDP 0x00000000000F5250 000014 (v00 BOCHS ) [ 0.002906] ACPI: RSDT 0x000000007FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002910] ACPI: FACP 0x000000007FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002914] ACPI: DSDT 0x000000007FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002915] ACPI: FACS 0x000000007FFE0000 000040 [ 0.002917] ACPI: APIC 0x000000007FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002918] ACPI: HPET 0x000000007FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002919] ACPI: MCFG 0x000000007FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002921] ACPI: WAET 0x000000007FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002922] ACPI: Reserving FACP table memory at [mem 0x7ffe2217-0x7ffe230a] [ 0.002923] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2216] [ 0.002924] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.002924] ACPI: Reserving APIC table memory at [mem 0x7ffe230b-0x7ffe239a] [ 0.002925] ACPI: Reserving HPET table memory at [mem 0x7ffe239b-0x7ffe23d2] [ 0.002925] ACPI: Reserving MCFG table memory at [mem 0x7ffe23d3-0x7ffe240e] [ 0.002926] ACPI: Reserving WAET table memory at [mem 0x7ffe240f-0x7ffe2436] [ 0.003068] Zone ranges: [ 0.003068] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.003069] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.003070] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003071] Movable zone start for each node [ 0.003072] Early memory node ranges [ 0.003072] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.003073] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.003074] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003075] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.003233] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.003254] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.014464] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.014515] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.014879] ACPI: PM-Timer IO Port: 0x608 [ 0.014889] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.014915] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.014918] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.014919] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.014920] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.014921] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.014922] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.014924] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.014924] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.014928] TSC deadline timer available [ 0.014931] CPU topo: Max. logical packages: 1 [ 0.014932] CPU topo: Max. logical dies: 1 [ 0.014932] CPU topo: Max. dies per package: 1 [ 0.014936] CPU topo: Max. threads per core: 1 [ 0.014936] CPU topo: Num. cores per package: 4 [ 0.014937] CPU topo: Num. threads per package: 4 [ 0.014937] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.014951] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.014966] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.014967] Booting paravirtualized kernel on KVM [ 0.014968] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.014973] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.015148] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.015170] Kernel command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.015224] random: crng init done [ 0.015815] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.016118] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.016145] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.016300] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.016303] software IO TLB: area num 4. [ 0.016304] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.020448] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.020467] ftrace: allocating 54035 entries in 212 pages [ 0.029837] ftrace: allocated 212 pages with 4 groups [ 0.029866] Dynamic Preempt: full [ 0.029982] rcu: Preemptible hierarchical RCU implementation. [ 0.029982] rcu: RCU event tracing is enabled. [ 0.029983] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.029984] All grace periods are expedited (rcu_expedited). [ 0.029984] Trampoline variant of Tasks RCU enabled. [ 0.029985] Rude variant of Tasks RCU enabled. [ 0.029985] Tracing variant of Tasks RCU enabled. [ 0.029985] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.029986] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.029990] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.029992] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.029993] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.034629] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.034812] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.034885] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.040474] Console: colour VGA+ 80x25 [ 0.040510] printk: legacy console [ttyS0] enabled [ 0.180045] ACPI: Core revision 20240827 [ 0.180809] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.182437] APIC: Switch to symmetric I/O mode setup [ 0.183412] x2apic enabled [ 0.184123] APIC: Switched APIC routing to: physical x2apic [ 0.185971] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.187026] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns [ 0.188812] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996) [ 0.189940] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.190813] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.191814] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.192814] Spectre V2 : Mitigation: Retpolines [ 0.193812] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.194813] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.195813] Speculative Store Bypass: Vulnerable [ 0.196825] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.197812] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.198813] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.199813] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.200813] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.219671] Freeing SMP alternatives memory: 56K [ 0.219815] pid_max: default: 32768 minimum: 301 [ 0.220827] LSM: initializing lsm=capability,landlock [ 0.221837] landlock: Up and running. [ 0.222833] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.223816] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.225034] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.225932] Performance Events: AMD PMU driver. [ 0.226754] ... version: 0 [ 0.226815] ... bit width: 48 [ 0.227543] ... generic registers: 4 [ 0.227815] ... value mask: 0000ffffffffffff [ 0.228730] ... max period: 00007fffffffffff [ 0.228814] ... fixed-purpose events: 0 [ 0.229521] ... event mask: 000000000000000f [ 0.229880] signal: max sigframe size: 1776 [ 0.230619] rcu: Hierarchical SRCU implementation. [ 0.230815] rcu: Max phase no-delay instances is 400. [ 0.231721] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.231916] smp: Bringing up secondary CPUs ... [ 0.232760] smpboot: x86: Booting SMP configuration: [ 0.232817] .... node #0, CPUs: #1 #2 #3 [ 0.266889] smp: Brought up 1 node, 4 CPUs [ 0.268510] smpboot: Total of 4 processors activated (21999.96 BogoMIPS) [ 0.269157] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5828K rodata, 3516K init, 2036K bss, 134048K reserved, 0K cma-reserved) [ 0.269880] devtmpfs: initialized [ 0.270514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.270817] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.271934] pinctrl core: initialized pinctrl subsystem [ 0.273057] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.273897] thermal_sys: Registered thermal governor 'step_wise' [ 0.273898] thermal_sys: Registered thermal governor 'user_space' [ 0.274824] cpuidle: using governor menu [ 0.276635] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.276818] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.277823] PCI: Using configuration type 1 for base access [ 0.278833] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.296815] raid6: sse2x4 gen() 24045 MB/s [ 0.313815] raid6: sse2x2 gen() 26206 MB/s [ 0.330817] raid6: sse2x1 gen() 7016 MB/s [ 0.331576] raid6: using algorithm sse2x2 gen() 26206 MB/s [ 0.348814] raid6: .... xor() 19048 MB/s, rmw enabled [ 0.349684] raid6: using ssse3x2 recovery algorithm [ 0.349878] ACPI: Added _OSI(Module Device) [ 0.350589] ACPI: Added _OSI(Processor Device) [ 0.350815] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.351612] ACPI: Added _OSI(Processor Aggregator Device) [ 0.352217] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.353879] ACPI: Interpreter enabled [ 0.354537] ACPI: PM: (supports S0 S3 S5) [ 0.354817] ACPI: Using IOAPIC for interrupt routing [ 0.355681] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.355815] PCI: Using E820 reservations for host bridge windows [ 0.356857] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.358624] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.358819] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.359837] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.360842] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.361851] PCI host bridge to bus 0000:00 [ 0.362574] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.362815] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.363814] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.364815] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.365814] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.366815] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.367815] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.368798] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.369243] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.370815] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.372515] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.375815] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.378786] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.379322] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.380779] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.381682] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.385783] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.387189] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.388817] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.392690] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.393780] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.395818] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.396856] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.398944] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.400816] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.402438] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.405815] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.408381] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.410235] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.411522] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.414595] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.415516] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.417190] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.418489] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.419175] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.421775] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.422173] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.422989] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.426786] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.427390] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.428622] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.430294] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.431575] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.431862] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.432863] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.433856] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.434867] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.435856] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.436861] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.437863] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.438834] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.439819] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.440818] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.441818] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.442818] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.443818] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.444818] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.445818] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.447009] iommu: Default domain type: Translated [ 0.447815] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.448858] SCSI subsystem initialized [ 0.449519] ACPI: bus type USB registered [ 0.449822] usbcore: registered new interface driver usbfs [ 0.450760] usbcore: registered new interface driver hub [ 0.450818] usbcore: registered new device driver usb [ 0.451675] pps_core: LinuxPPS API ver. 1 registered [ 0.451814] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.452818] PTP clock support registered [ 0.453517] Bluetooth: Core ver 2.22 [ 0.453820] NET: Registered PF_BLUETOOTH protocol family [ 0.454746] Bluetooth: HCI device and connection manager initialized [ 0.454816] Bluetooth: HCI socket layer initialized [ 0.455624] Bluetooth: L2CAP socket layer initialized [ 0.455817] Bluetooth: SCO socket layer initialized [ 0.456661] PCI: Using ACPI for IRQ routing [ 0.504736] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.504812] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.504812] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.504817] vgaarb: loaded [ 0.505297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.505815] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.510882] clocksource: Switched to clocksource kvm-clock [ 0.511876] pnp: PnP ACPI init [ 0.512518] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.513862] pnp: PnP ACPI: found 5 devices [ 0.521228] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.522774] NET: Registered PF_INET protocol family [ 0.523655] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.525910] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.527432] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.528766] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.530229] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.531681] TCP: Hash tables configured (established 65536 bind 65536) [ 0.532825] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.534021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.535295] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.536511] RPC: Registered named UNIX socket transport module. [ 0.537542] RPC: Registered udp transport module. [ 0.538409] RPC: Registered tcp transport module. [ 0.539215] RPC: Registered tcp-with-tls transport module. [ 0.540151] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.542646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.543704] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.544774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.545971] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.547142] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.548316] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.549697] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.551031] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.552247] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.553469] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.554776] PCI: CLS 0 bytes, default 64 [ 0.555533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.556669] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.558063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns [ 0.560607] Initialise system trusted keyrings [ 0.561472] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.562723] NFS: Registering the id_resolver key type [ 0.563617] Key type id_resolver registered [ 0.564356] Key type id_legacy registered [ 0.565537] Key type cifs.idmap registered [ 0.573277] xor: automatically using best checksumming function avx [ 0.574505] Key type asymmetric registered [ 0.575217] Asymmetric key parser 'x509' registered [ 0.576084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.577354] io scheduler mq-deadline registered [ 0.578151] io scheduler kyber registered [ 0.578830] io scheduler bfq registered [ 0.579734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.582118] ACPI: button: Power Button [PWRF] [ 0.585140] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.589620] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.598204] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.610581] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.614471] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.617567] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.621059] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.626472] Linux agpgart interface v0.103 [ 0.627912] ACPI: bus type drm_connector registered [ 0.628844] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.629802] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.632782] Console: switching to colour dummy device 80x25 [ 0.635730] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.635731] [drm] features: -context_init [ 0.638025] [drm] number of scanouts: 1 [ 0.638691] [drm] number of cap sets: 0 [ 0.639615] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.641461] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.668419] Console: switching to colour frame buffer device 160x50 [ 0.723252] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.731848] brd: module loaded [ 0.735168] loop: module loaded [ 0.737219] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.742956] virtio_blk virtio3: [vda] 1016456 512-byte logical blocks (520 MB/496 MiB) [ 0.752349] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.756753] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.760313] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.765125] scsi host0: ahci [ 0.767072] scsi host1: ahci [ 0.768932] scsi host2: ahci [ 0.770808] scsi host3: ahci [ 0.772732] scsi host4: ahci [ 0.774628] scsi host5: ahci [ 0.776313] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.780818] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.785142] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.789760] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.794326] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.798854] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.806677] e100: Intel(R) PRO/100 Network Driver [ 0.809300] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.812087] e1000: Intel(R) PRO/1000 Network Driver [ 0.814563] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.817686] e1000e: Intel(R) PRO/1000 Network Driver [ 0.819759] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.821795] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.824122] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.827547] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.830539] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.834140] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.842054] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.846048] hub 1-0:1.0: USB hub found [ 0.847662] hub 1-0:1.0: 6 ports detected [ 0.849711] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.852154] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.855539] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.858479] hub 2-0:1.0: USB hub found [ 0.860158] hub 2-0:1.0: 2 ports detected [ 0.863326] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.865776] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.869128] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.871838] hub 3-0:1.0: USB hub found [ 0.873441] hub 3-0:1.0: 2 ports detected [ 0.876515] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.879095] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.882444] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.885144] hub 4-0:1.0: USB hub found [ 0.886766] hub 4-0:1.0: 2 ports detected [ 0.888644] usbcore: registered new interface driver usb-storage [ 0.891511] usbcore: registered new interface driver usbserial_generic [ 0.894253] usbserial: USB Serial support registered for generic [ 0.896777] usbcore: registered new interface driver ftdi_sio [ 0.899209] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.902265] usbcore: registered new interface driver pl2303 [ 0.904576] usbserial: USB Serial support registered for pl2303 [ 0.907189] i8042: PNP: No PS/2 controller found. [ 0.909292] mousedev: PS/2 mouse device common for all mice [ 0.911738] rtc_cmos 00:03: RTC can wake from S4 [ 0.914606] rtc_cmos 00:03: registered as rtc0 [ 0.916611] rtc_cmos 00:03: setting system clock to 2025-05-07T16:08:22 UTC (1746634102) [ 0.920111] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.923630] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.923722] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.927768] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.930406] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.933434] sdhci: Secure Digital Host Controller Interface driver [ 0.938886] sdhci: Copyright(c) Pierre Ossman [ 0.940419] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.942473] usbcore: registered new interface driver usbhid [ 0.944389] usbhid: USB HID core driver [ 0.945755] u32 classifier [ 0.946702] input device check on [ 0.948020] Actions configured [ 0.949269] NET: Registered PF_INET6 protocol family [ 0.951352] Segment Routing with IPv6 [ 0.952648] In-situ OAM (IOAM) with IPv6 [ 0.954028] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.956143] NET: Registered PF_PACKET protocol family [ 0.957907] Bridge firewalling registered [ 0.959293] l2tp_core: L2TP core driver, V2.0 [ 0.960762] Key type dns_resolver registered [ 0.962317] NET: Registered PF_VSOCK protocol family [ 0.964472] IPI shorthand broadcast: enabled [ 0.967381] sched_clock: Marking stable (817005646, 149994567)->(1075494302, -108494089) [ 0.970268] registered taskstats version 1 [ 0.971669] Loading compiled-in X.509 certificates [ 0.974584] Key type .fscrypt registered [ 0.975941] Key type fscrypt-provisioning registered [ 0.978045] Btrfs loaded, zoned=no, fsverity=no [ 0.980377] Key type encrypted registered [ 0.982029] printk: legacy console [netcon0] enabled [ 0.983818] netconsole: network logging started [ 1.089029] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.110595] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.111858] ata2: SATA link down (SStatus 0 SControl 300) [ 1.112911] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.113897] ata3.00: applying bridge limits [ 1.114768] ata1: SATA link down (SStatus 0 SControl 300) [ 1.116214] ata6: SATA link down (SStatus 0 SControl 300) [ 1.119145] ata4: SATA link down (SStatus 0 SControl 300) [ 1.120296] ata3.00: configured for UDMA/100 [ 1.121394] ata5: SATA link down (SStatus 0 SControl 300) [ 1.124820] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.152373] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.155344] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.179015] IP-Config: Complete: [ 1.180182] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 1.183595] host=192.168.7.18, domain=, nis-domain=(none) [ 1.185554] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.185556] nameserver0=8.8.8.8 [ 1.189365] clk: Disabling unused clocks [ 1.191182] md: Waiting for all devices to be available before autodetect [ 1.193084] md: If you don't use raid, use raid=noautodetect [ 1.194630] md: Autodetecting RAID arrays. [ 1.195781] md: autorun ... [ 1.196582] md: ... autorun DONE. [ 1.206332] EXT4-fs (vda): mounted filesystem ba6fdeee-bb03-48f6-af51-a71a3fba8ea1 r/w with ordered data mode. Quota mode: disabled. [ 1.210574] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.212941] devtmpfs: mounted [ 1.215201] Freeing unused kernel image (initmem) memory: 3516K [ 1.217315] Write protecting the kernel read-only data: 26624k [ 1.220469] Freeing unused kernel image (rodata/data gap) memory: 316K [ 1.223656] Run /sbin/init as init process [ 1.232374] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 INIT: version 3.14 booting [ 1.237599] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.286500] udevd[138]: starting version 3.2.14 [ 1.293717] udevd[139]: starting eudev-3.2.14 [ 1.356032] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.487732] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.541338] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.608694] EXT4-fs (vda): re-mounted ba6fdeee-bb03-48f6-af51-a71a3fba8ea1 r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0 qemux86-64 login: