[    1.092458] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned
[    1.092675] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned
[    1.092854] pci 0000:00:04.0: BAR 0 [mem 0x800000c000-0x800000ffff 64bit]: assigned
[    1.093021] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned
[    1.093235] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned
[    1.093414] pci 0000:00:01.0: BAR 1 [mem 0x10040000-0x10040fff]: assigned
[    1.093561] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]: assigned
[    1.093706] pci 0000:00:03.0: BAR 1 [mem 0x10042000-0x10042fff]: assigned
[    1.093851] pci 0000:00:05.0: BAR 1 [mem 0x10043000-0x10043fff]: assigned
[    1.093998] pci 0000:00:06.0: BAR 1 [mem 0x10044000-0x10044fff]: assigned
[    1.094155] pci 0000:00:03.0: BAR 0 [io  0x1000-0x107f]: assigned
[    1.094306] pci 0000:00:05.0: BAR 0 [io  0x1080-0x10bf]: assigned
[    1.094440] pci 0000:00:01.0: BAR 0 [io  0x10c0-0x10df]: assigned
[    1.094574] pci 0000:00:02.0: BAR 0 [io  0x10e0-0x10ff]: assigned
[    1.094895] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    1.095381] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]
[    1.095528] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]
[    1.096450] pci 0000:00:04.0: enabling device (0000 -> 0002)
[    1.101087] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
[    1.104211] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)
[    1.106161] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)
[    1.108682] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[    1.110175] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002)
[    1.174372] printk: legacy console [hvc0] enabled
[    1.175947] [drm] pci: virtio-gpu-pci detected at 0000:00:06.0
[    1.179403] [drm] features: -virgl +edid -resource_blob -host_visible
[    1.179436] [drm] features: -context_init
[    1.180985] [drm] number of scanouts: 1
[    1.181333] [drm] number of cap sets: 0
[    1.190110] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:06.0 on minor 0
[    1.252684] Console: switching to colour frame buffer device 160x50
[    1.290149] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    1.329846] brd: module loaded
[    1.331299] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    1.339514] virtio_blk virtio2: [vda] 6554496 512-byte logical blocks (3.36 GB/3.13 GiB)
[    1.353276] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.354271] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
[    1.358559] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.361963] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.362678] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.363655] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[    1.370701] hub 1-0:1.0: USB hub found
[    1.371766] hub 1-0:1.0: 4 ports detected
[    1.375328] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.377641] hub 2-0:1.0: USB hub found
[    1.378232] hub 2-0:1.0: 4 ports detected
[    1.383676] rtc-pl031 9010000.pl031: registered as rtc0
[    1.384795] rtc-pl031 9010000.pl031: setting system clock to 2025-05-10T14:00:31 UTC (1746885631)
[    1.387868] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.390564] usbcore: registered new interface driver usbhid
[    1.391184] usbhid: USB HID core driver
[    1.395276] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available
[    1.396884] u32 classifier
[    1.397169]     input device check on
[    1.397527]     Actions configured
[    1.400045] NET: Registered PF_INET6 protocol family
[    1.407333] Segment Routing with IPv6
[    1.407868] In-situ OAM (IOAM) with IPv6
[    1.408881] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.411789] NET: Registered PF_PACKET protocol family
[    1.416988] Bridge firewalling registered
[    1.418170] l2tp_core: L2TP core driver, V2.0
[    1.418716] Key type dns_resolver registered
[    1.421853] NET: Registered PF_VSOCK protocol family
[    1.434216] registered taskstats version 1
[    1.450320] Key type .fscrypt registered
[    1.450854] Key type fscrypt-provisioning registered
[    1.456191] Btrfs loaded, zoned=no, fsverity=no
[    1.480815] Key type encrypted registered
[    1.482888] printk: legacy console [netcon0] enabled
[    1.483641] netconsole: network logging started
[    1.520021] IP-Config: Complete:
[    1.520846]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.522678]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.524101]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.524193]      nameserver0=8.8.8.8
[    1.527831] clk: Disabling unused clocks
[    1.528379] PM: genpd: Disabling unused power domains
[    1.532223] md: Waiting for all devices to be available before autodetect
[    1.532947] md: If you don't use raid, use raid=noautodetect
[    1.533492] md: Autodetecting RAID arrays.
[    1.533890] md: autorun ...
[    1.534149] md: ... autorun DONE.
[    1.590320] EXT4-fs (vda): mounted filesystem cc6a93f9-456d-4073-9ef5-4608d4607e02 r/w with ordered data mode. Quota mode: disabled.
[    1.591858] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.593979] devtmpfs: mounted
[    1.627557] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.650539] Freeing unused kernel memory: 1728K
[    1.654398] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.798756] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    1.801270] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0
[    1.923422] usb 1-2: new high-speed USB device number 3 using xhci_hcd
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    2.075456] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    2.140890] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0
Starting udev
[    2.480310] udevd[140]: starting version 3.2.14
[    2.538128] udevd[141]: starting eudev-3.2.14
[    3.420736] EXT4-fs (vda): re-mounted cc6a93f9-456d-4073-9ef5-4608d4607e02 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm64 6.12.27-yocto-standard #1 SMP PREEMPT Tue May  6 14:20:34 UTC 2025 aarch64
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.44.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 10 14:00:38 2025
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK

Poky (Yocto Project Reference Distro) 5.2 qemuarm64 hvc0

qemuarm64 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86RefreshRateToggle
> Warning:          Could not resolve keysym XF86Accessibility
> Warning:          Could not resolve keysym XF86DoNotDisturb
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-NBfCMxNjoe,guid=fb50f3c8686a93da87f7a5da681f5c08
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[670]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=645 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[670]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
[  574.731684] hellomod: loading out-of-tree module taints kernel.
[  574.742736] Hello world!
[  576.513166] Cleaning up hellomod.
