[    1.012276] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned
[    1.012461] pci 0000:00:04.0: BAR 0 [mem 0x800000c000-0x800000ffff 64bit]: assigned
[    1.012634] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned
[    1.012843] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned
[    1.013032] pci 0000:00:01.0: BAR 1 [mem 0x10040000-0x10040fff]: assigned
[    1.013187] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]: assigned
[    1.013337] pci 0000:00:03.0: BAR 1 [mem 0x10042000-0x10042fff]: assigned
[    1.013487] pci 0000:00:05.0: BAR 1 [mem 0x10043000-0x10043fff]: assigned
[    1.013635] pci 0000:00:06.0: BAR 1 [mem 0x10044000-0x10044fff]: assigned
[    1.013795] pci 0000:00:03.0: BAR 0 [io  0x1000-0x107f]: assigned
[    1.013955] pci 0000:00:05.0: BAR 0 [io  0x1080-0x10bf]: assigned
[    1.014092] pci 0000:00:01.0: BAR 0 [io  0x10c0-0x10df]: assigned
[    1.014229] pci 0000:00:02.0: BAR 0 [io  0x10e0-0x10ff]: assigned
[    1.015041] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    1.015195] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]
[    1.015335] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]
[    1.016218] pci 0000:00:04.0: enabling device (0000 -> 0002)
[    1.020620] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
[    1.023716] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)
[    1.025286] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)
[    1.027261] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[    1.028560] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002)
[    1.065267] printk: legacy console [hvc0] enabled
[    1.066622] [drm] pci: virtio-gpu-pci detected at 0000:00:06.0
[    1.070727] [drm] features: -virgl +edid -resource_blob -host_visible
[    1.070760] [drm] features: -context_init
[    1.072345] [drm] number of scanouts: 1
[    1.072755] [drm] number of cap sets: 0
[    1.081444] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:06.0 on minor 0
[    1.141847] Console: switching to colour frame buffer device 160x50
[    1.161036] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    1.184789] brd: module loaded
[    1.185592] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    1.191751] virtio_blk virtio2: [vda] 782022 512-byte logical blocks (400 MB/382 MiB)
[    1.204585] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.205459] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
[    1.209264] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.212565] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.212904] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.213336] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[    1.219972] hub 1-0:1.0: USB hub found
[    1.220698] hub 1-0:1.0: 4 ports detected
[    1.223949] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.225423] hub 2-0:1.0: USB hub found
[    1.225993] hub 2-0:1.0: 4 ports detected
[    1.231396] rtc-pl031 9010000.pl031: registered as rtc0
[    1.232481] rtc-pl031 9010000.pl031: setting system clock to 2025-05-12T12:01:11 UTC (1747051271)
[    1.235627] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.238335] usbcore: registered new interface driver usbhid
[    1.238992] usbhid: USB HID core driver
[    1.242500] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available
[    1.243690] u32 classifier
[    1.243846]     input device check on
[    1.244033]     Actions configured
[    1.245842] NET: Registered PF_INET6 protocol family
[    1.253027] Segment Routing with IPv6
[    1.253393] In-situ OAM (IOAM) with IPv6
[    1.254152] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.256650] NET: Registered PF_PACKET protocol family
[    1.257458] Bridge firewalling registered
[    1.258750] l2tp_core: L2TP core driver, V2.0
[    1.259063] Key type dns_resolver registered
[    1.259734] NET: Registered PF_VSOCK protocol family
[    1.272381] registered taskstats version 1
[    1.288615] Key type .fscrypt registered
[    1.289043] Key type fscrypt-provisioning registered
[    1.293926] Btrfs loaded, zoned=no, fsverity=no
[    1.308528] Key type encrypted registered
[    1.311028] printk: legacy console [netcon0] enabled
[    1.311492] netconsole: network logging started
[    1.346798] IP-Config: Complete:
[    1.347234]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.348257]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.348843]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.348877]      nameserver0=8.8.8.8
[    1.352588] clk: Disabling unused clocks
[    1.353175] PM: genpd: Disabling unused power domains
[    1.358818] md: Waiting for all devices to be available before autodetect
[    1.359369] md: If you don't use raid, use raid=noautodetect
[    1.359682] md: Autodetecting RAID arrays.
[    1.359904] md: autorun ...
[    1.360081] md: ... autorun DONE.
[    1.395636] EXT4-fs (vda): mounted filesystem 177e9ce7-fbb1-4d12-a9ae-5c3429728012 r/w with ordered data mode. Quota mode: disabled.
[    1.396927] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.399996] devtmpfs: mounted
[    1.457543] Freeing unused kernel memory: 1728K
[    1.463472] Run /sbin/init as init process
[    1.483518] usb 1-1: new high-speed USB device number 2 using xhci_hcd
INIT: version 3.14 booting
[    1.646174] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    1.649139] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.782557] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    1.925129] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
Starting udev
[    1.984503] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0
[    2.078878] udevd[136]: starting version 3.2.14
[    2.121171] udevd[137]: starting eudev-3.2.14
[    2.899472] EXT4-fs (vda): re-mounted 177e9ce7-fbb1-4d12-a9ae-5c3429728012 r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
/usr/libexec/sshd-auth does not exist or is not executable
Starting rpcbind daemon...done.
Starting NFS common utilities ... statd done
Starting atd: OK
starting nfsd: rpc.nfsd: Unable to request RDMA services: Protocol not supported
[    7.662843] NFSD: Unable to initialize client recovery tracking! (-110)
[    7.663524] NFSD: Is nfsdcld running? If not, enable CONFIG_NFSD_LEGACY_CLIENT_TRACKING.
[    7.663933] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 5.2 qemuarm64 hvc0

qemuarm64 login: 