[    0.000000] Linux version 6.12.27-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Tue May  6 14:20:34 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 381990764 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.996 MHz processor
[    0.000959] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000991] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000993] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002884] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002976] ACPI: Early table checksum verification disabled
[    0.002977] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002982] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002986] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002989] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002991] ACPI: FACS 0x000000001FFE0000 000040
[    0.002992] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002994] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002995] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002997] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002998] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002999] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.003000] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.003000] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.003000] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.003001] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.003001] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.003030] Zone ranges:
[    0.003030]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003031]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003032]   Normal   empty
[    0.003033] Movable zone start for each node
[    0.003033] Early memory node ranges
[    0.003033]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003034]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003035] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003148] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003168] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004128] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004497] ACPI: PM-Timer IO Port: 0x608
[    0.004504] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004528] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004530] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004531] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004532] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004533] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004533] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004535] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004536] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004538] TSC deadline timer available
[    0.004541] CPU topo: Max. logical packages:   1
[    0.004541] CPU topo: Max. logical dies:       1
[    0.004542] CPU topo: Max. dies per package:   1
[    0.004545] CPU topo: Max. threads per core:   1
[    0.004545] CPU topo: Num. cores per package:     4
[    0.004545] CPU topo: Num. threads per package:   4
[    0.004546] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004555] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004568] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004569] Booting paravirtualized kernel on KVM
[    0.004570] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004573] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004744] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004764] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004807] random: crng init done
[    0.004822] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004831] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004853] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005021] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005435] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005447] ftrace: allocating 54055 entries in 212 pages
[    0.014259] ftrace: allocated 212 pages with 4 groups
[    0.014284] Dynamic Preempt: full
[    0.014408] rcu: Preemptible hierarchical RCU implementation.
[    0.014408] rcu: 	RCU event tracing is enabled.
[    0.014409] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014410] 	All grace periods are expedited (rcu_expedited).
[    0.014410] 	Trampoline variant of Tasks RCU enabled.
[    0.014410] 	Rude variant of Tasks RCU enabled.
[    0.014411] 	Tracing variant of Tasks RCU enabled.
[    0.014411] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014412] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014415] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014417] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014417] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019046] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019228] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019289] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.024199] Console: colour VGA+ 80x25
[    0.024234] printk: legacy console [ttyS0] enabled
[    0.170908] ACPI: Core revision 20240827
[    0.171622] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.173167] APIC: Switch to symmetric I/O mode setup
[    0.174126] x2apic enabled
[    0.174833] APIC: Switched APIC routing to: physical x2apic
[    0.176733] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.177685] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.180039] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749996)
[    0.181169] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.182039] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.183041] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.184040] Spectre V2 : Mitigation: Retpolines
[    0.185039] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.186039] Speculative Store Bypass: Vulnerable
[    0.187050] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.188039] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.189040] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.190039] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.191039] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.209333] Freeing SMP alternatives memory: 56K
[    0.210041] pid_max: default: 32768 minimum: 301
[    0.210750] LSM: initializing lsm=capability,landlock
[    0.211063] landlock: Up and running.
[    0.212054] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.213039] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.214196] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.215155] Performance Events: AMD PMU driver.
[    0.215867] ... version:                0
[    0.216042] ... bit width:              48
[    0.216671] ... generic registers:      4
[    0.217041] ... value mask:             0000ffffffffffff
[    0.217862] ... max period:             00007fffffffffff
[    0.218041] ... fixed-purpose events:   0
[    0.218652] ... event mask:             000000000000000f
[    0.219091] signal: max sigframe size: 1776
[    0.219755] rcu: Hierarchical SRCU implementation.
[    0.220041] rcu: 	Max phase no-delay instances is 400.
[    0.220855] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.221158] smp: Bringing up secondary CPUs ...
[    0.221910] smpboot: x86: Booting SMP configuration:
[    0.222044] .... node  #0, CPUs:      #1 #2 #3
[    0.257079] smp: Brought up 1 node, 4 CPUs
[    0.258677] smpboot: Total of 4 processors activated (21999.96 BogoMIPS)
[    0.259447] Memory: 471752K/523736K available (20480K kernel code, 2446K rwdata, 5856K rodata, 3524K init, 2028K bss, 47756K reserved, 0K cma-reserved)
[    0.260281] devtmpfs: initialized
[    0.261080] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.262043] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.263079] pinctrl core: initialized pinctrl subsystem
[    0.264773] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.265120] thermal_sys: Registered thermal governor 'step_wise'
[    0.265121] thermal_sys: Registered thermal governor 'user_space'
[    0.266051] cpuidle: using governor menu
[    0.267766] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.268044] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.269047] PCI: Using configuration type 1 for base access
[    0.269940] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.288042] raid6: sse2x4   gen() 24077 MB/s
[    0.305042] raid6: sse2x2   gen() 25749 MB/s
[    0.322041] raid6: sse2x1   gen()  7639 MB/s
[    0.322725] raid6: using algorithm sse2x2 gen() 25749 MB/s
[    0.340041] raid6: .... xor() 19762 MB/s, rmw enabled
[    0.340842] raid6: using ssse3x2 recovery algorithm
[    0.341100] ACPI: Added _OSI(Module Device)
[    0.341745] ACPI: Added _OSI(Processor Device)
[    0.342041] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.342774] ACPI: Added _OSI(Processor Aggregator Device)
[    0.343439] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.345064] ACPI: Interpreter enabled
[    0.345650] ACPI: PM: (supports S0 S3 S5)
[    0.346042] ACPI: Using IOAPIC for interrupt routing
[    0.346821] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.347041] PCI: Using E820 reservations for host bridge windows
[    0.348018] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.348960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.349045] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.350062] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.351051] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.352075] PCI host bridge to bus 0000:00
[    0.352709] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.353041] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.354041] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.355041] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.356041] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.357041] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.358041] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.358931] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.359461] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.361042] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.362848] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.367497] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.369041] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.370536] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.372042] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.373601] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.377042] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.379413] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.381042] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.384042] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.385994] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.387468] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.388081] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.389536] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.391042] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.393042] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.396524] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.398615] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.401886] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.402717] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.404453] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.405745] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.408042] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.409455] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.410364] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.412658] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.413392] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.414224] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.417285] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.418521] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.419837] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.422351] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.423881] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.424088] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.425070] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.426047] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.427001] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.427082] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.428046] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.429021] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.429061] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.429991] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.430044] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.430979] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.431044] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.431969] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.432045] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.432964] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.433227] iommu: Default domain type: Translated
[    0.433985] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.434081] SCSI subsystem initialized
[    0.434661] ACPI: bus type USB registered
[    0.435050] usbcore: registered new interface driver usbfs
[    0.435895] usbcore: registered new interface driver hub
[    0.436046] usbcore: registered new device driver usb
[    0.436833] pps_core: LinuxPPS API ver. 1 registered
[    0.437041] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.438042] PTP clock support registered
[    0.438651] Bluetooth: Core ver 2.22
[    0.439047] NET: Registered PF_BLUETOOTH protocol family
[    0.439859] Bluetooth: HCI device and connection manager initialized
[    0.440042] Bluetooth: HCI socket layer initialized
[    0.440779] Bluetooth: L2CAP socket layer initialized
[    0.441042] Bluetooth: SCO socket layer initialized
[    0.442068] PCI: Using ACPI for IRQ routing
[    0.489641] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.490019] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.490038] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.490044] vgaarb: loaded
[    0.490497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.491041] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.495084] clocksource: Switched to clocksource kvm-clock
[    0.496013] pnp: PnP ACPI init
[    0.497360] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.498613] pnp: PnP ACPI: found 5 devices
[    0.507008] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.508393] NET: Registered PF_INET protocol family
[    0.509172] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.510405] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.511716] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.512922] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.514104] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.515415] TCP: Hash tables configured (established 4096 bind 4096)
[    0.516411] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.517430] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.518516] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.519593] RPC: Registered named UNIX socket transport module.
[    0.520526] RPC: Registered udp transport module.
[    0.521258] RPC: Registered tcp transport module.
[    0.521994] RPC: Registered tcp-with-tls transport module.
[    0.522836] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.523816] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.524762] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.525789] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.527671] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.528742] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.529803] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.531039] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.532246] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.533391] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.534537] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.535758] PCI: CLS 0 bytes, default 64
[    0.536455] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bbc354b, max_idle_ns: 440795297204 ns
[    0.539048] Initialise system trusted keyrings
[    0.539839] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.540953] NFS: Registering the id_resolver key type
[    0.541716] Key type id_resolver registered
[    0.542372] Key type id_legacy registered
[    0.543477] Key type cifs.idmap registered
[    0.551166] xor: automatically using best checksumming function   avx       
[    0.552256] Key type asymmetric registered
[    0.552896] Asymmetric key parser 'x509' registered
[    0.553628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.554748] io scheduler mq-deadline registered
[    0.555448] io scheduler kyber registered
[    0.556077] io scheduler bfq registered
[    0.557826] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.559987] ACPI: button: Power Button [PWRF]
[    0.562995] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.567135] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.571206] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.579088] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.582857] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.585599] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.589609] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.594522] Linux agpgart interface v0.103
[    0.596286] ACPI: bus type drm_connector registered
[    0.598350] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.600510] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.608173] Console: switching to colour dummy device 80x25
[    0.610654] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.610657] [drm] features: -context_init
[    0.615912] [drm] number of scanouts: 1
[    0.618252] [drm] number of cap sets: 0
[    0.620230] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.624299] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.648162] Console: switching to colour frame buffer device 160x50
[    0.661399] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.664407] brd: module loaded
[    0.665757] loop: module loaded
[    0.666395] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.668275] virtio_blk virtio3: [vda] 1194204 512-byte logical blocks (611 MB/583 MiB)
[    0.673125] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.674576] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.675680] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.677285] scsi host0: ahci
[    0.677963] scsi host1: ahci
[    0.678614] scsi host2: ahci
[    0.679290] scsi host3: ahci
[    0.679956] scsi host4: ahci
[    0.680653] scsi host5: ahci
[    0.681195] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.682590] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.684019] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.685486] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.686906] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.688322] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.691104] e100: Intel(R) PRO/100 Network Driver
[    0.692089] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.693106] e1000: Intel(R) PRO/1000 Network Driver
[    0.693971] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.694946] e1000e: Intel(R) PRO/1000 Network Driver
[    0.695762] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.696779] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.697704] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.699248] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.700944] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.702302] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.703440] hub 1-0:1.0: USB hub found
[    0.704113] hub 1-0:1.0: 2 ports detected
[    0.705255] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.707387] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.710803] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.718852] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.721356] hub 2-0:1.0: USB hub found
[    0.722847] hub 2-0:1.0: 6 ports detected
[    0.745104] hub 1-0:1.0: USB hub found
[    0.746686] hub 1-0:1.0: 2 ports detected
[    0.748441] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.750585] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.753790] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.756415] hub 3-0:1.0: USB hub found
[    0.757996] hub 3-0:1.0: 2 ports detected
[    0.760910] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.763042] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.766343] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.768943] hub 4-0:1.0: USB hub found
[    0.770545] hub 4-0:1.0: 2 ports detected
[    0.772407] usbcore: registered new interface driver usb-storage
[    0.775007] usbcore: registered new interface driver usbserial_generic
[    0.777613] usbserial: USB Serial support registered for generic
[    0.780069] usbcore: registered new interface driver ftdi_sio
[    0.782395] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.785364] usbcore: registered new interface driver pl2303
[    0.787565] usbserial: USB Serial support registered for pl2303
[    0.789950] i8042: PNP: No PS/2 controller found.
[    0.791895] mousedev: PS/2 mouse device common for all mice
[    0.794217] rtc_cmos 00:03: RTC can wake from S4
[    0.796970] rtc_cmos 00:03: registered as rtc0
[    0.798886] rtc_cmos 00:03: setting system clock to 2025-05-12T12:13:57 UTC (1747052037)
[    0.802206] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.805508] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.805525] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.808172] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.810866] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.816055] sdhci: Secure Digital Host Controller Interface driver
[    0.818011] sdhci: Copyright(c) Pierre Ossman
[    0.819401] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.821330] usbcore: registered new interface driver usbhid
[    0.823093] usbhid: USB HID core driver
[    0.824337] u32 classifier
[    0.825214]     input device check on
[    0.826372]     Actions configured
[    0.827546] NET: Registered PF_INET6 protocol family
[    0.829660] Segment Routing with IPv6
[    0.830896] In-situ OAM (IOAM) with IPv6
[    0.832166] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.834153] NET: Registered PF_PACKET protocol family
[    0.835733] Bridge firewalling registered
[    0.837028] l2tp_core: L2TP core driver, V2.0
[    0.838377] Key type dns_resolver registered
[    0.839821] NET: Registered PF_VSOCK protocol family
[    0.841106] IPI shorthand broadcast: enabled
[    0.842487] sched_clock: Marking stable (685002510, 156806116)->(914141858, -72333232)
[    0.843866] registered taskstats version 1
[    0.844526] Loading compiled-in X.509 certificates
[    0.845993] Key type .fscrypt registered
[    0.846596] Key type fscrypt-provisioning registered
[    0.847595] Btrfs loaded, zoned=no, fsverity=no
[    0.849066] Key type encrypted registered
[    0.849766] printk: legacy console [netcon0] enabled
[    0.850554] netconsole: network logging started
[    0.959839] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.000304] ata4: SATA link down (SStatus 0 SControl 300)
[    1.002718] ata1: SATA link down (SStatus 0 SControl 300)
[    1.005229] ata6: SATA link down (SStatus 0 SControl 300)
[    1.007667] ata5: SATA link down (SStatus 0 SControl 300)
[    1.010094] ata2: SATA link down (SStatus 0 SControl 300)
[    1.012553] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.015127] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.017332] ata3.00: applying bridge limits
[    1.019137] ata3.00: configured for UDMA/100
[    1.021315] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.051133] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.053775] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.077836] IP-Config: Complete:
[    1.079184]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.083034]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.085240]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.085243]      nameserver0=8.8.8.8
[    1.089615] clk: Disabling unused clocks
[    1.092022] md: Waiting for all devices to be available before autodetect
[    1.093987] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.094657] md: If you don't use raid, use raid=noautodetect
[    1.098429] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.103616] md: Autodetecting RAID arrays.
[    1.104957] md: autorun ...
[    1.106005] md: ... autorun DONE.
[    1.110860] EXT4-fs (vda): mounted filesystem 962e3057-15c6-49df-85e9-3725f5cd4866 r/w with ordered data mode. Quota mode: disabled.
[    1.114649] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.116690] devtmpfs: mounted
[    1.118926] Freeing unused kernel image (initmem) memory: 3524K
[    1.120826] Write protecting the kernel read-only data: 26624k
[    1.123053] Freeing unused kernel image (rodata/data gap) memory: 288K
[    1.125129] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.198706] udevd[151]: starting version 3.2.14
[    1.206124] udevd[152]: starting eudev-3.2.14
[    1.215834] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.349712] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.404758] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.472099] EXT4-fs (vda): re-mounted 962e3057-15c6-49df-85e9-3725f5cd4866 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.124 [1;34m [seatd/server.c:145] New client connected (pid: 355, uid: 1000, gid: 1000)[0m
00:00:00.124 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.124 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCS/1qkk1CHM7j7oboJOqmRfSDYzsvzUmU1E590WJ1FCJft0MVaSugkoANUBEMgsUAuTalNHCfdD65CPOBlhCu0diitreWUYr6B4QI5UUqSTaxh4qZ4vuirMEcy5ZxIeVGSHBlay1nQl0qbqa8suszlrfsqx+mKnWFFGcDvvx9PxKJ7ydnaPJKyvULRUlEankIVeVj70UqyybNnx9kvkbZok3p+3ItO2Lrew4bskXRHcykYNKmAAKWVOb0ld81RGHOor+QWg4pnZ7mhd/Z9/0PAN4hR+JIr6UMdWC1+u4raQnIexJvask5TiTHwp0EfVsHF18e7gFhpYf9YYH+Qfdjh root@qemux86-64
Fingerprint: SHA256:IH5JPZtz9aBAeZKg+wBeUKim13G7yZD27zsZZLYO/d0
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.945254] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.946192] Bluetooth: BNEP filters: protocol multicast
[    1.947086] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:04.235 [1;34m [seatd/server.c:145] New client connected (pid: 5911, uid: 0, gid: 0)[0m
00:01:04.239 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:04.242 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
