[    0.000000] Linux version 6.12.27-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Tue May  6 14:20:34 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 364945590 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000953] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000985] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000987] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002874] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002973] ACPI: Early table checksum verification disabled
[    0.002974] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002980] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002984] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002987] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002989] ACPI: FACS 0x000000001FFE0000 000040
[    0.002990] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002992] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002993] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002994] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002996] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002997] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002997] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002998] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002998] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002998] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002999] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.003026] Zone ranges:
[    0.003026]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003027]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003028]   Normal   empty
[    0.003029] Movable zone start for each node
[    0.003029] Early memory node ranges
[    0.003029]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003030]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003031] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003148] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003169] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004108] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004455] ACPI: PM-Timer IO Port: 0x608
[    0.004461] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004484] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004486] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004487] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004487] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004488] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004489] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004491] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004491] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004493] TSC deadline timer available
[    0.004497] CPU topo: Max. logical packages:   1
[    0.004497] CPU topo: Max. logical dies:       1
[    0.004497] CPU topo: Max. dies per package:   1
[    0.004500] CPU topo: Max. threads per core:   1
[    0.004501] CPU topo: Num. cores per package:     4
[    0.004501] CPU topo: Num. threads per package:   4
[    0.004501] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004510] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004522] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004523] Booting paravirtualized kernel on KVM
[    0.004524] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004527] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004700] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004721] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004765] random: crng init done
[    0.004779] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004788] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004811] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004975] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005404] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005416] ftrace: allocating 54055 entries in 212 pages
[    0.013900] ftrace: allocated 212 pages with 4 groups
[    0.013923] Dynamic Preempt: full
[    0.014048] rcu: Preemptible hierarchical RCU implementation.
[    0.014048] rcu: 	RCU event tracing is enabled.
[    0.014049] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014049] 	All grace periods are expedited (rcu_expedited).
[    0.014050] 	Trampoline variant of Tasks RCU enabled.
[    0.014050] 	Rude variant of Tasks RCU enabled.
[    0.014050] 	Tracing variant of Tasks RCU enabled.
[    0.014051] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014051] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014055] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014056] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014056] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018664] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018844] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018898] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023804] Console: colour VGA+ 80x25
[    0.023839] printk: legacy console [ttyS0] enabled
[    0.136844] ACPI: Core revision 20240827
[    0.137604] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.139101] APIC: Switch to symmetric I/O mode setup
[    0.140066] x2apic enabled
[    0.140794] APIC: Switched APIC routing to: physical x2apic
[    0.142701] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.143648] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.145267] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.146397] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.147267] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.148269] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.149268] Spectre V2 : Mitigation: Retpolines
[    0.150267] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.151267] Speculative Store Bypass: Vulnerable
[    0.151978] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.152267] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.153267] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.154267] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.155267] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.173383] Freeing SMP alternatives memory: 56K
[    0.174112] pid_max: default: 32768 minimum: 301
[    0.174278] LSM: initializing lsm=capability,landlock
[    0.175291] landlock: Up and running.
[    0.175863] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.176267] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.177416] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.178370] Performance Events: AMD PMU driver.
[    0.179084] ... version:                0
[    0.179269] ... bit width:              48
[    0.179915] ... generic registers:      4
[    0.180269] ... value mask:             0000ffffffffffff
[    0.181074] ... max period:             00007fffffffffff
[    0.181269] ... fixed-purpose events:   0
[    0.181897] ... event mask:             000000000000000f
[    0.182318] signal: max sigframe size: 1776
[    0.182985] rcu: Hierarchical SRCU implementation.
[    0.183270] rcu: 	Max phase no-delay instances is 400.
[    0.184099] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.184385] smp: Bringing up secondary CPUs ...
[    0.185148] smpboot: x86: Booting SMP configuration:
[    0.185272] .... node  #0, CPUs:      #1 #2 #3
[    0.220322] smp: Brought up 1 node, 4 CPUs
[    0.221902] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.222678] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5856K rodata, 3524K init, 2028K bss, 47760K reserved, 0K cma-reserved)
[    0.223507] devtmpfs: initialized
[    0.224312] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.225271] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.226306] pinctrl core: initialized pinctrl subsystem
[    0.227974] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.228350] thermal_sys: Registered thermal governor 'step_wise'
[    0.228351] thermal_sys: Registered thermal governor 'user_space'
[    0.229278] cpuidle: using governor menu
[    0.230992] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.231271] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.232275] PCI: Using configuration type 1 for base access
[    0.233165] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.249326] raid6: sse2x4   gen() 10177 MB/s
[    0.267453] raid6: sse2x2   gen() 11712 MB/s
[    0.286575] raid6: sse2x1   gen()  5563 MB/s
[    0.288272] raid6: using algorithm sse2x2 gen() 11712 MB/s
[    0.307189] raid6: .... xor() 9578 MB/s, rmw enabled
[    0.308272] raid6: using ssse3x2 recovery algorithm
[    0.310354] ACPI: Added _OSI(Module Device)
[    0.311272] ACPI: Added _OSI(Processor Device)
[    0.312272] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.314272] ACPI: Added _OSI(Processor Aggregator Device)
[    0.317057] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.320329] ACPI: Interpreter enabled
[    0.321277] ACPI: PM: (supports S0 S3 S5)
[    0.321906] ACPI: Using IOAPIC for interrupt routing
[    0.322285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.323269] PCI: Using E820 reservations for host bridge windows
[    0.324238] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.325187] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.325273] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.326291] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.327279] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.328303] PCI host bridge to bus 0000:00
[    0.328957] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.329269] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.330269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.331269] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.332269] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.333269] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.334269] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.335152] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.335702] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.337270] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.338925] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.343270] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.345216] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.345777] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.347192] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.348230] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.352270] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.354551] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.356271] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.359270] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.362242] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.363741] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.364311] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.365771] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.367270] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.368809] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.371817] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.373806] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.375635] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.377546] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.379667] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.382367] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.384683] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.385952] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.386581] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.388905] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.390358] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.391471] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.394517] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.395738] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.397044] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.399539] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.401293] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.402273] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.403242] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.403334] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.404288] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.405259] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.405310] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.406274] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.407190] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.407273] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.408181] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.408272] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.409183] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.409277] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.410189] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.410272] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.411390] iommu: Default domain type: Translated
[    0.412133] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.412309] SCSI subsystem initialized
[    0.412892] ACPI: bus type USB registered
[    0.413279] usbcore: registered new interface driver usbfs
[    0.414110] usbcore: registered new interface driver hub
[    0.414272] usbcore: registered new device driver usb
[    0.415042] pps_core: LinuxPPS API ver. 1 registered
[    0.415269] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.416271] PTP clock support registered
[    0.416873] Bluetooth: Core ver 2.22
[    0.417274] NET: Registered PF_BLUETOOTH protocol family
[    0.418091] Bluetooth: HCI device and connection manager initialized
[    0.418270] Bluetooth: HCI socket layer initialized
[    0.419015] Bluetooth: L2CAP socket layer initialized
[    0.419270] Bluetooth: SCO socket layer initialized
[    0.420030] PCI: Using ACPI for IRQ routing
[    0.468297] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.469249] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.469266] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.469273] vgaarb: loaded
[    0.469727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.470270] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.476315] clocksource: Switched to clocksource kvm-clock
[    0.477243] pnp: PnP ACPI init
[    0.477768] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.479412] pnp: PnP ACPI: found 5 devices
[    0.488103] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.489503] NET: Registered PF_INET protocol family
[    0.490269] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.491503] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.492803] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.493981] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.495152] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.496393] TCP: Hash tables configured (established 4096 bind 4096)
[    0.497377] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.498369] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.499461] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.500544] RPC: Registered named UNIX socket transport module.
[    0.501467] RPC: Registered udp transport module.
[    0.502171] RPC: Registered tcp transport module.
[    0.502899] RPC: Registered tcp-with-tls transport module.
[    0.503739] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.504731] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.505672] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.506614] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.507663] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.509147] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.510199] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.511405] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.512617] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.513764] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.514916] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.516157] PCI: CLS 0 bytes, default 64
[    0.516839] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.519342] Initialise system trusted keyrings
[    0.520130] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.521241] NFS: Registering the id_resolver key type
[    0.522018] Key type id_resolver registered
[    0.522664] Key type id_legacy registered
[    0.523731] Key type cifs.idmap registered
[    0.531431] xor: automatically using best checksumming function   avx       
[    0.532529] Key type asymmetric registered
[    0.533143] Asymmetric key parser 'x509' registered
[    0.533905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.535023] io scheduler mq-deadline registered
[    0.535718] io scheduler kyber registered
[    0.536342] io scheduler bfq registered
[    0.537196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.539515] ACPI: button: Power Button [PWRF]
[    0.542599] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.547059] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.551528] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.557760] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.561781] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.564735] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.568634] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.573856] Linux agpgart interface v0.103
[    0.575682] ACPI: bus type drm_connector registered
[    0.577915] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.580214] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.588546] Console: switching to colour dummy device 80x25
[    0.591205] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.591208] [drm] features: -context_init
[    0.596794] [drm] number of scanouts: 1
[    0.598812] [drm] number of cap sets: 0
[    0.600455] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.603289] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.616280] Console: switching to colour frame buffer device 160x50
[    0.631211] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.634559] brd: module loaded
[    0.635822] loop: module loaded
[    0.636404] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.638179] virtio_blk virtio3: [vda] 1194226 512-byte logical blocks (611 MB/583 MiB)
[    0.640992] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.642259] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.643240] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.644735] scsi host0: ahci
[    0.645354] scsi host1: ahci
[    0.645984] scsi host2: ahci
[    0.646625] scsi host3: ahci
[    0.647238] scsi host4: ahci
[    0.647859] scsi host5: ahci
[    0.648333] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.649592] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.650843] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.652099] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.653359] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.654617] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.656992] e100: Intel(R) PRO/100 Network Driver
[    0.657773] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.658694] e1000: Intel(R) PRO/1000 Network Driver
[    0.659496] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.660381] e1000e: Intel(R) PRO/1000 Network Driver
[    0.661135] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.662043] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.662868] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.664705] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.665705] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.666982] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.673441] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.674556] hub 1-0:1.0: USB hub found
[    0.675139] hub 1-0:1.0: 6 ports detected
[    0.675900] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.676750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.677961] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.678990] hub 2-0:1.0: USB hub found
[    0.679601] hub 2-0:1.0: 2 ports detected
[    0.680591] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.681408] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.682619] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.683690] hub 3-0:1.0: USB hub found
[    0.684291] hub 3-0:1.0: 2 ports detected
[    0.685282] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.686280] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.687493] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.688607] hub 4-0:1.0: USB hub found
[    0.689227] hub 4-0:1.0: 2 ports detected
[    0.689931] usbcore: registered new interface driver usb-storage
[    0.690867] usbcore: registered new interface driver usbserial_generic
[    0.691873] usbserial: USB Serial support registered for generic
[    0.692866] usbcore: registered new interface driver ftdi_sio
[    0.693749] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.694873] usbcore: registered new interface driver pl2303
[    0.695722] usbserial: USB Serial support registered for pl2303
[    0.696666] i8042: PNP: No PS/2 controller found.
[    0.697485] mousedev: PS/2 mouse device common for all mice
[    0.698435] rtc_cmos 00:03: RTC can wake from S4
[    0.699540] rtc_cmos 00:03: registered as rtc0
[    0.700289] rtc_cmos 00:03: setting system clock to 2025-05-13T17:09:29 UTC (1747156169)
[    0.701573] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.702994] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.703249] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.704484] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.707775] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.708781] sdhci: Secure Digital Host Controller Interface driver
[    0.712588] sdhci: Copyright(c) Pierre Ossman
[    0.713275] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.714179] usbcore: registered new interface driver usbhid
[    0.715082] usbhid: USB HID core driver
[    0.715700] u32 classifier
[    0.716119]     input device check on
[    0.716696]     Actions configured
[    0.717272] NET: Registered PF_INET6 protocol family
[    0.718317] Segment Routing with IPv6
[    0.718911] In-situ OAM (IOAM) with IPv6
[    0.719540] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.720522] NET: Registered PF_PACKET protocol family
[    0.721306] Bridge firewalling registered
[    0.721936] l2tp_core: L2TP core driver, V2.0
[    0.722618] Key type dns_resolver registered
[    0.723324] NET: Registered PF_VSOCK protocol family
[    0.724552] IPI shorthand broadcast: enabled
[    0.726048] sched_clock: Marking stable (603001320, 122418591)->(805315830, -79895919)
[    0.727350] registered taskstats version 1
[    0.728014] Loading compiled-in X.509 certificates
[    0.729470] Key type .fscrypt registered
[    0.730072] Key type fscrypt-provisioning registered
[    0.731010] Btrfs loaded, zoned=no, fsverity=no
[    0.732825] Key type encrypted registered
[    0.733547] printk: legacy console [netcon0] enabled
[    0.734314] netconsole: network logging started
[    0.916504] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.962251] ata2: SATA link down (SStatus 0 SControl 300)
[    0.963327] ata5: SATA link down (SStatus 0 SControl 300)
[    0.965310] ata4: SATA link down (SStatus 0 SControl 300)
[    0.967930] ata6: SATA link down (SStatus 0 SControl 300)
[    0.970350] ata1: SATA link down (SStatus 0 SControl 300)
[    0.971376] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.973400] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.975129] ata3.00: applying bridge limits
[    0.976539] ata3.00: configured for UDMA/100
[    0.978358] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.008767] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.011627] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.036434] IP-Config: Complete:
[    1.037512]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.040981]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.043216]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.043219]      nameserver0=8.8.8.8
[    1.047620] clk: Disabling unused clocks
[    1.051038] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.055021] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.058817] md: Waiting for all devices to be available before autodetect
[    1.061009] md: If you don't use raid, use raid=noautodetect
[    1.062834] md: Autodetecting RAID arrays.
[    1.064176] md: autorun ...
[    1.065098] md: ... autorun DONE.
[    1.069708] EXT4-fs (vda): mounted filesystem 894bc760-3ee4-46df-850d-d1dcb014373f r/w with ordered data mode. Quota mode: disabled.
[    1.073517] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.075526] devtmpfs: mounted
[    1.077756] Freeing unused kernel image (initmem) memory: 3524K
[    1.079728] Write protecting the kernel read-only data: 26624k
[    1.081949] Freeing unused kernel image (rodata/data gap) memory: 288K
[    1.084046] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.145844] udevd[148]: starting version 3.2.14
[    1.150060] udevd[149]: starting eudev-3.2.14
[    1.172445] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.306331] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.362349] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.427063] EXT4-fs (vda): re-mounted 894bc760-3ee4-46df-850d-d1dcb014373f r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.124 [1;34m [seatd/server.c:145] New client connected (pid: 351, uid: 1000, gid: 1000)[0m
00:00:00.124 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.124 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCr7pBO4a0PfQcqEuE5qsBSv6TAebA3roWc8XSjcxthkdZds7MKJ3Bgi4P7HV8CZtdoyULhPWsxnrQkg8kykY/4RsRBYLIJ2RveBNcPjKnRhcyz3AEEP3PLpri0yAxoH3D9IUjG+KEY6qR2TInXNqtiR2tVFrSDVUfJqIAhur4CchIJQd5HoGMT24ubByz28cAm/7vnYXZR2mtJIthOiLpiWcqGHmoSdYfkrjSeIGzz9hXx/AZ/YmkTI5N3E309JdcI7DZbx5gxnEDtsISbzlA1N/hbvD8XV4hd2A0qJhG2MWShm/wwdQlrv56piTS9uUeOg4J6yD4TSryjrGL3ji2t root@qemux86-64
Fingerprint: SHA256:qocjagnhlwOSvYDQwuZStHA5/FktXC0DcFLrrNzKZz0
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    1.844961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.847518] Bluetooth: BNEP filters: protocol multicast
done[    1.849583] Bluetooth: BNEP socket layer initialized

 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
00:01:04.346 [1;34m [seatd/server.c:145] New client connected (pid: 5907, uid: 0, gid: 0)[0m
00:01:04.346 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:04.346 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
