[ 0.000000] Linux version 6.12.27-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Tue May 6 14:20:34 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 1710120347 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000010] tsc: Detected 4192.120 MHz processor [ 0.000994] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001029] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001034] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001083] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002799] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.016765] ACPI: Early table checksum verification disabled [ 0.016776] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.016789] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016796] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016804] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016807] ACPI: FACS 0x000000007FFE0000 000040 [ 0.016810] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016812] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016815] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016817] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016818] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.016820] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.016821] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.016822] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.016823] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.016824] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.016825] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.016966] Zone ranges: [ 0.016968] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016970] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016972] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.016974] Movable zone start for each node [ 0.016975] Early memory node ranges [ 0.016976] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.016977] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.016978] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.016980] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.032042] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032327] On node 0, zone DMA: 97 pages in unavailable ranges [ 1.186363] On node 0, zone Normal: 40 pages in unavailable ranges [ 1.186899] On node 0, zone Normal: 5120 pages in unavailable ranges [ 1.187178] ACPI: PM-Timer IO Port: 0x608 [ 1.187194] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 1.187224] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 1.187226] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.187227] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 1.187229] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.187232] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 1.187233] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 1.187235] ACPI: Using ACPI (MADT) for SMP configuration information [ 1.187236] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 1.187243] TSC deadline timer available [ 1.187247] CPU topo: Max. logical packages: 1 [ 1.187248] CPU topo: Max. logical dies: 1 [ 1.187248] CPU topo: Max. dies per package: 1 [ 1.187252] CPU topo: Max. threads per core: 1 [ 1.187252] CPU topo: Num. cores per package: 4 [ 1.187253] CPU topo: Num. threads per package: 4 [ 1.187253] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 1.187278] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 1.187300] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 1.187301] Booting paravirtualized kernel on KVM [ 1.187306] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.187317] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 1.197726] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 1.197800] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 1.197934] random: crng init done [ 1.235181] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.257652] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.257759] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 1.627573] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 1.627586] software IO TLB: area num 4. [ 1.627589] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 1.651433] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.651574] ftrace: allocating 54055 entries in 212 pages [ 1.665778] ftrace: allocated 212 pages with 4 groups [ 1.666233] Dynamic Preempt: full [ 1.670479] rcu: Preemptible hierarchical RCU implementation. [ 1.670481] rcu: RCU event tracing is enabled. [ 1.670483] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 1.670487] All grace periods are expedited (rcu_expedited). [ 1.670488] Trampoline variant of Tasks RCU enabled. [ 1.670489] Rude variant of Tasks RCU enabled. [ 1.670489] Tracing variant of Tasks RCU enabled. [ 1.670491] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.670492] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 1.670511] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.670513] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.670515] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.687709] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 1.687969] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 1.688062] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 1.692185] Console: colour VGA+ 80x25 [ 1.692234] printk: legacy console [ttyS0] enabled [ 1.806085] ACPI: Core revision 20240827 [ 1.807182] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.809784] APIC: Switch to symmetric I/O mode setup [ 1.810736] x2apic enabled [ 1.811478] APIC: Switched APIC routing to: physical x2apic [ 1.813568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.814495] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns [ 1.816385] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120) [ 1.817571] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.818389] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.819400] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.820390] Spectre V2 : Mitigation: Retpolines [ 1.821387] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 1.822387] Speculative Store Bypass: Vulnerable [ 1.823404] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.824386] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.825386] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.826387] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.827386] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.856416] Freeing SMP alternatives memory: 56K [ 1.857262] pid_max: default: 32768 minimum: 301 [ 1.857412] LSM: initializing lsm=capability,landlock [ 1.858420] landlock: Up and running. [ 1.860624] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.862421] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.865384] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.866760] Performance Events: AMD PMU driver. [ 1.867392] ... version: 0 [ 1.868391] ... bit width: 48 [ 1.869161] ... generic registers: 4 [ 1.869388] ... value mask: 0000ffffffffffff [ 1.870268] ... max period: 00007fffffffffff [ 1.870388] ... fixed-purpose events: 0 [ 1.870994] ... event mask: 000000000000000f [ 1.871627] signal: max sigframe size: 1776 [ 1.872490] rcu: Hierarchical SRCU implementation. [ 1.873245] rcu: Max phase no-delay instances is 400. [ 1.873531] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.875009] smp: Bringing up secondary CPUs ... [ 1.875849] smpboot: x86: Booting SMP configuration: [ 1.876372] .... node #0, CPUs: #1 #2 #3 [ 1.917424] smp: Brought up 1 node, 4 CPUs [ 1.919061] smpboot: Total of 4 processors activated (33536.96 BogoMIPS) [ 1.920578] Memory: 5081580K/5221848K available (20480K kernel code, 2446K rwdata, 5856K rodata, 3524K init, 2028K bss, 134056K reserved, 0K cma-reserved) [ 1.921985] devtmpfs: initialized [ 1.922842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.923392] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.925550] pinctrl core: initialized pinctrl subsystem [ 1.932212] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.932608] thermal_sys: Registered thermal governor 'step_wise' [ 1.932610] thermal_sys: Registered thermal governor 'user_space' [ 1.933414] cpuidle: using governor menu [ 1.936017] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.936393] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.937405] PCI: Using configuration type 1 for base access [ 1.938475] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.963389] raid6: sse2x4 gen() 17866 MB/s [ 1.981390] raid6: sse2x2 gen() 4204 MB/s [ 1.999393] raid6: sse2x1 gen() 1160 MB/s [ 2.000391] raid6: using algorithm sse2x4 gen() 17866 MB/s [ 2.018395] raid6: .... xor() 2340 MB/s, rmw enabled [ 2.019392] raid6: using ssse3x2 recovery algorithm [ 2.020638] ACPI: Added _OSI(Module Device) [ 2.021357] ACPI: Added _OSI(Processor Device) [ 2.021388] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.022152] ACPI: Added _OSI(Processor Aggregator Device) [ 2.023275] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 2.024614] ACPI: Interpreter enabled [ 2.025409] ACPI: PM: (supports S0 S3 S5) [ 2.026110] ACPI: Using IOAPIC for interrupt routing [ 2.026677] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.027390] PCI: Using E820 reservations for host bridge windows [ 2.028468] ACPI: Enabled 2 GPEs in block 00 to 3F [ 2.031471] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.032397] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.033412] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 2.034365] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 2.034604] PCI host bridge to bus 0000:00 [ 2.035368] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.035390] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.036393] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.037389] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 2.038389] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 2.039388] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 2.040400] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.041463] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 2.043054] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.045393] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 2.049000] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 2.055393] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 2.057393] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 2.059045] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.061186] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 2.063394] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 2.068394] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 2.072091] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 2.074458] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 2.079472] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 2.082475] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 2.087456] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 2.089341] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.090280] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.092152] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 2.094391] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 2.100397] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 2.104384] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 2.107959] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 2.109682] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 2.113390] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 2.115687] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 2.118064] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 2.119161] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 2.119917] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 2.122594] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 2.123744] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 2.124700] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 2.128377] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 2.130267] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 2.131203] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 2.133295] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 2.134520] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 2.135455] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.136437] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 2.137462] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.138473] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 2.139452] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 2.141050] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 2.141436] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 2.142421] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 2.143372] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 2.143398] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 2.144358] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 2.144402] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 2.145397] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 2.146401] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 2.147397] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 2.149577] iommu: Default domain type: Translated [ 2.150388] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.151694] SCSI subsystem initialized [ 2.152611] ACPI: bus type USB registered [ 2.153425] usbcore: registered new interface driver usbfs [ 2.155106] usbcore: registered new interface driver hub [ 2.155393] usbcore: registered new device driver usb [ 2.156262] pps_core: LinuxPPS API ver. 1 registered [ 2.156389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.157398] PTP clock support registered [ 2.160010] Bluetooth: Core ver 2.22 [ 2.160408] NET: Registered PF_BLUETOOTH protocol family [ 2.161398] Bluetooth: HCI device and connection manager initialized [ 2.162403] Bluetooth: HCI socket layer initialized [ 2.163003] Bluetooth: L2CAP socket layer initialized [ 2.163408] Bluetooth: SCO socket layer initialized [ 2.164580] PCI: Using ACPI for IRQ routing [ 2.215174] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 2.215384] pci 0000:00:03.0: vgaarb: bridge control possible [ 2.215384] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.215400] vgaarb: loaded [ 2.216578] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.217633] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 2.225114] clocksource: Switched to clocksource kvm-clock [ 2.470766] pnp: PnP ACPI init [ 2.471605] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 2.472782] pnp: PnP ACPI: found 5 devices [ 2.486398] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.488189] NET: Registered PF_INET protocol family [ 2.490156] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.492452] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.496530] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.497774] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.499657] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 2.515991] TCP: Hash tables configured (established 65536 bind 65536) [ 2.517896] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.519696] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.521153] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.526051] RPC: Registered named UNIX socket transport module. [ 2.527379] RPC: Registered udp transport module. [ 2.528083] RPC: Registered tcp transport module. [ 2.528826] RPC: Registered tcp-with-tls transport module. [ 2.529712] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.531282] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.532401] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.533424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.534497] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 2.535578] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 2.536850] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 2.538772] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 2.540360] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 2.542447] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 2.544652] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 2.546575] PCI: CLS 0 bytes, default 64 [ 2.547525] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.550087] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 2.551429] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns [ 2.629918] Initialise system trusted keyrings [ 2.631760] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.635611] NFS: Registering the id_resolver key type [ 2.636508] Key type id_resolver registered [ 2.637250] Key type id_legacy registered [ 2.639582] Key type cifs.idmap registered [ 2.648944] xor: automatically using best checksumming function avx [ 2.650771] Key type asymmetric registered [ 2.651451] Asymmetric key parser 'x509' registered [ 2.660217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.663088] io scheduler mq-deadline registered [ 2.666078] io scheduler kyber registered [ 2.668466] io scheduler bfq registered [ 2.670853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.674045] ACPI: button: Power Button [PWRF] [ 2.676773] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 2.679126] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 2.681366] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 2.696230] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 2.699046] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.700521] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.702628] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.706509] Linux agpgart interface v0.103 [ 2.707352] ACPI: bus type drm_connector registered [ 2.708191] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 2.708972] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 2.711450] Console: switching to colour dummy device 80x25 [ 2.712421] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.712422] [drm] features: -context_init [ 2.714705] [drm] number of scanouts: 1 [ 2.715377] [drm] number of cap sets: 0 [ 2.716544] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.732018] fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.819137] Console: switching to colour frame buffer device 160x50 [ 2.862653] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.876008] brd: module loaded [ 2.882669] loop: module loaded [ 2.884018] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.886885] virtio_blk virtio3: [vda] 788272 512-byte logical blocks (404 MB/385 MiB) [ 2.894578] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.896030] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.897104] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.900780] scsi host0: ahci [ 2.904729] scsi host1: ahci [ 2.907092] scsi host2: ahci [ 2.909010] scsi host3: ahci [ 2.909925] scsi host4: ahci [ 2.910724] scsi host5: ahci [ 2.911354] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.912765] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.914041] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.915323] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.916511] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.917942] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.923803] e100: Intel(R) PRO/100 Network Driver [ 2.924656] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.925555] e1000: Intel(R) PRO/1000 Network Driver [ 2.926346] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.927294] e1000e: Intel(R) PRO/1000 Network Driver [ 2.928701] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.929842] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.930697] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.933652] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.935343] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.938634] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.945430] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.946635] hub 1-0:1.0: USB hub found [ 2.947283] hub 1-0:1.0: 6 ports detected [ 2.948223] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.949189] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.950572] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.952256] hub 2-0:1.0: USB hub found [ 2.952998] hub 2-0:1.0: 2 ports detected [ 2.955229] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.956255] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.957645] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.959141] hub 3-0:1.0: USB hub found [ 2.960012] hub 3-0:1.0: 2 ports detected [ 2.962229] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.963065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.965981] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.967162] hub 4-0:1.0: USB hub found [ 2.967896] hub 4-0:1.0: 2 ports detected [ 2.968930] usbcore: registered new interface driver usb-storage [ 2.970132] usbcore: registered new interface driver usbserial_generic [ 2.971332] usbserial: USB Serial support registered for generic [ 2.972627] usbcore: registered new interface driver ftdi_sio [ 2.973666] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.974977] usbcore: registered new interface driver pl2303 [ 2.976340] usbserial: USB Serial support registered for pl2303 [ 2.978076] i8042: PNP: No PS/2 controller found. [ 2.979010] mousedev: PS/2 mouse device common for all mice [ 2.980442] rtc_cmos 00:03: RTC can wake from S4 [ 2.982707] rtc_cmos 00:03: registered as rtc0 [ 2.984640] rtc_cmos 00:03: setting system clock to 2025-05-16T15:12:02 UTC (1747408322) [ 2.986289] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.988282] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.989062] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.989451] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.992843] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.994222] sdhci: Secure Digital Host Controller Interface driver [ 2.995307] sdhci: Copyright(c) Pierre Ossman [ 2.996094] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.997221] usbcore: registered new interface driver usbhid [ 2.998257] usbhid: USB HID core driver [ 2.999005] u32 classifier [ 2.999506] input device check on [ 3.000195] Actions configured [ 3.001000] NET: Registered PF_INET6 protocol family [ 3.002946] Segment Routing with IPv6 [ 3.003743] In-situ OAM (IOAM) with IPv6 [ 3.005497] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.008048] NET: Registered PF_PACKET protocol family [ 3.009429] Bridge firewalling registered [ 3.010591] l2tp_core: L2TP core driver, V2.0 [ 3.011530] Key type dns_resolver registered [ 3.012595] NET: Registered PF_VSOCK protocol family [ 3.014974] IPI shorthand broadcast: enabled [ 3.019327] sched_clock: Marking stable (2894002937, 124403978)->(3243378940, -224972025) [ 3.021502] registered taskstats version 1 [ 3.024169] Loading compiled-in X.509 certificates [ 3.033862] Key type .fscrypt registered [ 3.034518] Key type fscrypt-provisioning registered [ 3.036716] Btrfs loaded, zoned=no, fsverity=no [ 3.040381] Key type encrypted registered [ 3.041481] printk: legacy console [netcon0] enabled [ 3.042315] netconsole: network logging started [ 3.190461] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.227500] ata1: SATA link down (SStatus 0 SControl 300) [ 3.235153] ata2: SATA link down (SStatus 0 SControl 300) [ 3.238122] ata5: SATA link down (SStatus 0 SControl 300) [ 3.241715] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.245171] ata6: SATA link down (SStatus 0 SControl 300) [ 3.246797] ata4: SATA link down (SStatus 0 SControl 300) [ 3.248841] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.249865] ata3.00: applying bridge limits [ 3.255122] ata3.00: configured for UDMA/100 [ 3.257488] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.294128] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.296632] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.323805] IP-Config: Complete: [ 3.325325] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.327675] host=192.168.7.6, domain=, nis-domain=(none) [ 3.330017] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.330021] nameserver0=8.8.8.8 [ 3.333643] clk: Disabling unused clocks [ 3.336525] md: Waiting for all devices to be available before autodetect [ 3.338437] md: If you don't use raid, use raid=noautodetect [ 3.340094] md: Autodetecting RAID arrays. [ 3.341655] md: autorun ... [ 3.342588] md: ... autorun DONE. [ 3.347696] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 3.352208] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 3.358704] EXT4-fs (vda): mounted filesystem 6f5b6e2a-b2b8-4099-bd99-0168f771171e r/w with ordered data mode. Quota mode: disabled. [ 3.360540] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.362268] devtmpfs: mounted [ 3.368105] Freeing unused kernel image (initmem) memory: 3524K [ 3.369027] Write protecting the kernel read-only data: 26624k [ 3.372584] Freeing unused kernel image (rodata/data gap) memory: 288K [ 3.373524] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 3.491484] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 3.497015] udevd[138]: starting version 3.2.14 [ 3.511709] udevd[139]: starting eudev-3.2.14 [ 3.634781] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 3.690559] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 3.755342] EXT4-fs (vda): re-mounted 6f5b6e2a-b2b8-4099-bd99-0168f771171e r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0 qemux86-64 login: