[    0.000000] Linux version 6.12.27-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Tue May  6 14:20:34 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 320158959 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000897] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000935] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000938] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002827] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002951] ACPI: Early table checksum verification disabled
[    0.002952] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002957] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002961] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002964] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002966] ACPI: FACS 0x000000001FFE0000 000040
[    0.002967] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002969] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002970] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002972] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002973] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002974] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002975] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002975] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002975] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002976] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002976] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.003005] Zone ranges:
[    0.003005]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003006]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003007]   Normal   empty
[    0.003008] Movable zone start for each node
[    0.003008] Early memory node ranges
[    0.003008]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003009]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003010] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003166] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003186] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004239] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004633] ACPI: PM-Timer IO Port: 0x608
[    0.004641] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004666] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004668] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004669] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004670] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004670] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004671] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004673] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004674] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004675] TSC deadline timer available
[    0.004678] CPU topo: Max. logical packages:   1
[    0.004679] CPU topo: Max. logical dies:       1
[    0.004679] CPU topo: Max. dies per package:   1
[    0.004682] CPU topo: Max. threads per core:   1
[    0.004683] CPU topo: Num. cores per package:     4
[    0.004683] CPU topo: Num. threads per package:   4
[    0.004683] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004693] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004707] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004708] Booting paravirtualized kernel on KVM
[    0.004709] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004711] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004930] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004951] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004995] random: crng init done
[    0.005008] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.005017] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.005043] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005245] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005720] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005732] ftrace: allocating 54055 entries in 212 pages
[    0.014211] ftrace: allocated 212 pages with 4 groups
[    0.014234] Dynamic Preempt: full
[    0.014402] rcu: Preemptible hierarchical RCU implementation.
[    0.014403] rcu: 	RCU event tracing is enabled.
[    0.014403] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014404] 	All grace periods are expedited (rcu_expedited).
[    0.014404] 	Trampoline variant of Tasks RCU enabled.
[    0.014405] 	Rude variant of Tasks RCU enabled.
[    0.014405] 	Tracing variant of Tasks RCU enabled.
[    0.014405] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014406] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014409] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014410] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014411] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019066] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019255] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019315] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.025211] Console: colour VGA+ 80x25
[    0.025251] printk: legacy console [ttyS0] enabled
[    0.145028] ACPI: Core revision 20240827
[    0.145822] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147431] APIC: Switch to symmetric I/O mode setup
[    0.148483] x2apic enabled
[    0.149234] APIC: Switched APIC routing to: physical x2apic
[    0.151284] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.152330] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.154111] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.155271] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.156111] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157113] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158112] Spectre V2 : Mitigation: Retpolines
[    0.159111] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.160111] Speculative Store Bypass: Vulnerable
[    0.161125] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.162111] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.163111] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.164112] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.165111] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.183503] Freeing SMP alternatives memory: 56K
[    0.184113] pid_max: default: 32768 minimum: 301
[    0.185116] LSM: initializing lsm=capability,landlock
[    0.185997] landlock: Up and running.
[    0.186126] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.187111] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.188260] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.189216] Performance Events: AMD PMU driver.
[    0.190009] ... version:                0
[    0.190114] ... bit width:              48
[    0.190809] ... generic registers:      4
[    0.191113] ... value mask:             0000ffffffffffff
[    0.192011] ... max period:             00007fffffffffff
[    0.192113] ... fixed-purpose events:   0
[    0.192796] ... event mask:             000000000000000f
[    0.193163] signal: max sigframe size: 1776
[    0.193897] rcu: Hierarchical SRCU implementation.
[    0.194114] rcu: 	Max phase no-delay instances is 400.
[    0.195014] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.195228] smp: Bringing up secondary CPUs ...
[    0.196061] smpboot: x86: Booting SMP configuration:
[    0.196116] .... node  #0, CPUs:      #1 #2 #3
[    0.230125] smp: Brought up 1 node, 4 CPUs
[    0.231822] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.232382] Memory: 471744K/523736K available (20480K kernel code, 2446K rwdata, 5856K rodata, 3524K init, 2028K bss, 47764K reserved, 0K cma-reserved)
[    0.233311] devtmpfs: initialized
[    0.234136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.235115] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.236138] pinctrl core: initialized pinctrl subsystem
[    0.237431] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.238192] thermal_sys: Registered thermal governor 'step_wise'
[    0.238193] thermal_sys: Registered thermal governor 'user_space'
[    0.239122] cpuidle: using governor menu
[    0.240913] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.241115] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.242120] PCI: Using configuration type 1 for base access
[    0.243140] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.260673] raid6: sse2x4   gen() 14504 MB/s
[    0.277164] raid6: sse2x2   gen() 14017 MB/s
[    0.294172] raid6: sse2x1   gen()  7542 MB/s
[    0.294917] raid6: using algorithm sse2x4 gen() 14504 MB/s
[    0.312449] raid6: .... xor() 3397 MB/s, rmw enabled
[    0.313113] raid6: using ssse3x2 recovery algorithm
[    0.314005] ACPI: Added _OSI(Module Device)
[    0.315114] ACPI: Added _OSI(Processor Device)
[    0.315869] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.317113] ACPI: Added _OSI(Processor Aggregator Device)
[    0.318605] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.320173] ACPI: Interpreter enabled
[    0.321121] ACPI: PM: (supports S0 S3 S5)
[    0.321816] ACPI: Using IOAPIC for interrupt routing
[    0.322131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.323114] PCI: Using E820 reservations for host bridge windows
[    0.324167] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.325970] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.326118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.327137] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.328141] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.329149] PCI host bridge to bus 0000:00
[    0.329861] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.330114] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.331114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.332113] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.333114] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.334113] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.335125] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.336174] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.337623] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.339114] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.341115] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.344764] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.346114] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.347697] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.349544] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.350969] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.353519] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.355694] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.357114] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.359855] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.361062] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.363114] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.364158] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.365677] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.367114] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.369060] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.372114] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.374696] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.376512] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.377789] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.379511] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.380755] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.382367] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.383777] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.384514] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.386729] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.387523] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.388313] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.392561] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.393575] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.394839] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.396356] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.397830] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.398163] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.399173] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.400166] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.401157] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.402159] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.403159] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.404157] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.405134] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.406117] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.407119] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.408116] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.409119] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.410116] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.411117] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.412117] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.413307] iommu: Default domain type: Translated
[    0.414114] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.415153] SCSI subsystem initialized
[    0.415879] ACPI: bus type USB registered
[    0.416123] usbcore: registered new interface driver usbfs
[    0.417117] usbcore: registered new interface driver hub
[    0.418116] usbcore: registered new device driver usb
[    0.419070] pps_core: LinuxPPS API ver. 1 registered
[    0.419113] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.420115] PTP clock support registered
[    0.420869] Bluetooth: Core ver 2.22
[    0.421119] NET: Registered PF_BLUETOOTH protocol family
[    0.422113] Bluetooth: HCI device and connection manager initialized
[    0.423114] Bluetooth: HCI socket layer initialized
[    0.424016] Bluetooth: L2CAP socket layer initialized
[    0.424115] Bluetooth: SCO socket layer initialized
[    0.425036] PCI: Using ACPI for IRQ routing
[    0.479336] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.480110] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.480110] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.480116] vgaarb: loaded
[    0.480615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.481113] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.485152] clocksource: Switched to clocksource kvm-clock
[    0.486165] pnp: PnP ACPI init
[    0.486795] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.488168] pnp: PnP ACPI: found 5 devices
[    0.494736] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.496270] NET: Registered PF_INET protocol family
[    0.497127] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.498497] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.499940] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.501265] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.502587] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.503825] TCP: Hash tables configured (established 4096 bind 4096)
[    0.505069] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.506195] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.507415] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.508554] RPC: Registered named UNIX socket transport module.
[    0.509604] RPC: Registered udp transport module.
[    0.510423] RPC: Registered tcp transport module.
[    0.511220] RPC: Registered tcp-with-tls transport module.
[    0.512161] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.513269] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.514330] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.515386] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.516561] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.517734] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.518900] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.520241] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.521528] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.523141] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.524346] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.525639] PCI: CLS 0 bytes, default 64
[    0.526402] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.528726] Initialise system trusted keyrings
[    0.529559] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.530777] NFS: Registering the id_resolver key type
[    0.531654] Key type id_resolver registered
[    0.532672] Key type id_legacy registered
[    0.533629] Key type cifs.idmap registered
[    0.541442] xor: automatically using best checksumming function   avx       
[    0.542656] Key type asymmetric registered
[    0.543367] Asymmetric key parser 'x509' registered
[    0.544208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.545481] io scheduler mq-deadline registered
[    0.546251] io scheduler kyber registered
[    0.546960] io scheduler bfq registered
[    0.547869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.549948] ACPI: button: Power Button [PWRF]
[    0.551232] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.553416] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.555187] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.558566] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.560261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.561485] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.563064] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.565232] Linux agpgart interface v0.103
[    0.565998] ACPI: bus type drm_connector registered
[    0.566913] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.567862] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.571179] Console: switching to colour dummy device 80x25
[    0.572283] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.572285] [drm] features: -context_init
[    0.574565] [drm] number of scanouts: 1
[    0.575234] [drm] number of cap sets: 0
[    0.576180] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.578090] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.588920] Console: switching to colour frame buffer device 160x50
[    0.597413] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.599979] brd: module loaded
[    0.601179] loop: module loaded
[    0.601861] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.603796] virtio_blk virtio3: [vda] 1193258 512-byte logical blocks (611 MB/583 MiB)
[    0.606650] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.608070] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.609179] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.610810] scsi host0: ahci
[    0.611467] scsi host1: ahci
[    0.612069] scsi host2: ahci
[    0.612764] scsi host3: ahci
[    0.613371] scsi host4: ahci
[    0.613974] scsi host5: ahci
[    0.614497] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.615932] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.617345] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.618757] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.620166] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.621579] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.624147] e100: Intel(R) PRO/100 Network Driver
[    0.625046] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.626006] e1000: Intel(R) PRO/1000 Network Driver
[    0.626838] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.627831] e1000e: Intel(R) PRO/1000 Network Driver
[    0.628693] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.629711] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.630641] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.632371] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.633301] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.634711] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.640870] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.642019] hub 1-0:1.0: USB hub found
[    0.642710] hub 1-0:1.0: 6 ports detected
[    0.643538] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.644453] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.645824] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.646941] hub 2-0:1.0: USB hub found
[    0.647590] hub 2-0:1.0: 2 ports detected
[    0.648665] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.649583] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.650945] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.652109] hub 3-0:1.0: USB hub found
[    0.652753] hub 3-0:1.0: 2 ports detected
[    0.654049] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.654963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.656325] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.657485] hub 4-0:1.0: USB hub found
[    0.658144] hub 4-0:1.0: 2 ports detected
[    0.658925] usbcore: registered new interface driver usb-storage
[    0.659967] usbcore: registered new interface driver usbserial_generic
[    0.661085] usbserial: USB Serial support registered for generic
[    0.662190] usbcore: registered new interface driver ftdi_sio
[    0.663224] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.664506] usbcore: registered new interface driver pl2303
[    0.665465] usbserial: USB Serial support registered for pl2303
[    0.666491] i8042: PNP: No PS/2 controller found.
[    0.667343] mousedev: PS/2 mouse device common for all mice
[    0.668371] rtc_cmos 00:03: RTC can wake from S4
[    0.669571] rtc_cmos 00:03: registered as rtc0
[    0.670410] rtc_cmos 00:03: setting system clock to 2025-05-27T08:03:26 UTC (1748333006)
[    0.671832] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.673272] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.673280] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.674859] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.675891] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.677090] sdhci: Secure Digital Host Controller Interface driver
[    0.679406] sdhci: Copyright(c) Pierre Ossman
[    0.680161] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.681170] usbcore: registered new interface driver usbhid
[    0.682123] usbhid: USB HID core driver
[    0.682794] u32 classifier
[    0.683269]     input device check on
[    0.683900]     Actions configured
[    0.684532] NET: Registered PF_INET6 protocol family
[    0.685625] Segment Routing with IPv6
[    0.686269] In-situ OAM (IOAM) with IPv6
[    0.686957] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.688036] NET: Registered PF_PACKET protocol family
[    0.688928] Bridge firewalling registered
[    0.689632] l2tp_core: L2TP core driver, V2.0
[    0.690390] Key type dns_resolver registered
[    0.691179] NET: Registered PF_VSOCK protocol family
[    0.692321] IPI shorthand broadcast: enabled
[    0.693772] sched_clock: Marking stable (562207691, 130850129)->(761204940, -68147120)
[    0.695186] registered taskstats version 1
[    0.695919] Loading compiled-in X.509 certificates
[    0.697346] Key type .fscrypt registered
[    0.698026] Key type fscrypt-provisioning registered
[    0.699013] Btrfs loaded, zoned=no, fsverity=no
[    0.700226] Key type encrypted registered
[    0.700992] printk: legacy console [netcon0] enabled
[    0.701841] netconsole: network logging started
[    0.877898] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.931921] ata5: SATA link down (SStatus 0 SControl 300)
[    0.933123] ata2: SATA link down (SStatus 0 SControl 300)
[    0.934215] ata6: SATA link down (SStatus 0 SControl 300)
[    0.935365] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.936621] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.937680] ata3.00: applying bridge limits
[    0.938588] ata1: SATA link down (SStatus 0 SControl 300)
[    0.939806] ata4: SATA link down (SStatus 0 SControl 300)
[    0.940800] ata3.00: configured for UDMA/100
[    0.949956] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.978091] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.979302] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.003861] IP-Config: Complete:
[    1.004466]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.006195]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.007226]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.007227]      nameserver0=8.8.8.8
[    1.009462] clk: Disabling unused clocks
[    1.010268] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.012516] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.014766] md: Waiting for all devices to be available before autodetect
[    1.015711] md: If you don't use raid, use raid=noautodetect
[    1.016490] md: Autodetecting RAID arrays.
[    1.017049] md: autorun ...
[    1.017447] md: ... autorun DONE.
[    1.019998] EXT4-fs (vda): mounted filesystem 26ddb0bf-2c8b-402f-a0fd-14f097fea282 r/w with ordered data mode. Quota mode: disabled.
[    1.021658] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.022620] devtmpfs: mounted
[    1.023571] Freeing unused kernel image (initmem) memory: 3524K
[    1.024415] Write protecting the kernel read-only data: 26624k
[    1.025317] Freeing unused kernel image (rodata/data gap) memory: 288K
[    1.026207] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.065435] udevd[149]: starting version 3.2.14
[    1.068822] udevd[150]: starting eudev-3.2.14
[    1.126900] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.258212] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.311279] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.370096] EXT4-fs (vda): re-mounted 26ddb0bf-2c8b-402f-a0fd-14f097fea282 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.113 [1;34m [seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.113 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.113 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCAxcubTEHBNguUAIktq2BC54clHl4vtdOH95oF90T7Y6jDiv695hqSS2CBJInQuqbPysX8tC9zh+pHLzhObC98USgO3E7T3ThS5B5UPjq5/iGAKbmMkoL9ruzaTUV5VVlBIcG2rKMmfMcxLSyKYQqQISt3JV/h3YjhxjuNN9ZNTsFmCl6E4VC0ETbuVeuWlygdBAPbtG65Y7jB0Gc0SdOeI4ebK8Pr7yc5/GEccJrttchNlNP7ntoF3CcvxLT0U8KHdHFw9q96fwDjWJKhA9+VpfQjwpnpdgibI9xSArZA3GwlOFOOjuPajFcLNsSg5l7KIgAyvcxLZzaBnQxT96+5 root@qemux86-64
Fingerprint: SHA256:KWX7nLi0C22ypOstKjtrewvqTrxEnTv+AZx025FN+ow
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.704201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.705566] Bluetooth: BNEP filters: protocol multicast
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.707395] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:04.769 [1;34m [seatd/server.c:145] New client connected (pid: 5910, uid: 0, gid: 0)[0m
00:01:04.770 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:04.772 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
