[    0.000000] Linux version 6.12.30-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Wed May 28 17:08:41 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 389048391 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000882] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000907] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000909] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002784] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002888] ACPI: Early table checksum verification disabled
[    0.002890] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002894] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002898] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002901] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002903] ACPI: FACS 0x000000001FFE0000 000040
[    0.002904] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002906] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002907] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002909] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002910] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002911] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002911] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002912] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002912] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002913] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002913] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.002938] Zone ranges:
[    0.002938]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002940]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002940]   Normal   empty
[    0.002941] Movable zone start for each node
[    0.002941] Early memory node ranges
[    0.002942]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002943]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002943] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003053] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003073] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003990] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004298] ACPI: PM-Timer IO Port: 0x608
[    0.004304] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004324] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004326] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004327] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004328] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004329] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004330] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004332] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004332] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004334] TSC deadline timer available
[    0.004337] CPU topo: Max. logical packages:   1
[    0.004337] CPU topo: Max. logical dies:       1
[    0.004338] CPU topo: Max. dies per package:   1
[    0.004341] CPU topo: Max. threads per core:   1
[    0.004341] CPU topo: Num. cores per package:     4
[    0.004342] CPU topo: Num. threads per package:   4
[    0.004342] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004350] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004359] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004360] Booting paravirtualized kernel on KVM
[    0.004361] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004364] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004433] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004452] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004496] random: crng init done
[    0.004510] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004519] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004541] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004696] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005106] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005118] ftrace: allocating 54072 entries in 212 pages
[    0.013385] ftrace: allocated 212 pages with 4 groups
[    0.013408] Dynamic Preempt: full
[    0.013519] rcu: Preemptible hierarchical RCU implementation.
[    0.013520] rcu: 	RCU event tracing is enabled.
[    0.013520] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.013521] 	All grace periods are expedited (rcu_expedited).
[    0.013521] 	Trampoline variant of Tasks RCU enabled.
[    0.013522] 	Rude variant of Tasks RCU enabled.
[    0.013522] 	Tracing variant of Tasks RCU enabled.
[    0.013523] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.013523] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.013527] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013528] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.013529] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018096] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018271] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018324] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.022422] Console: colour VGA+ 80x25
[    0.022456] printk: legacy console [ttyS0] enabled
[    0.134038] ACPI: Core revision 20240827
[    0.134712] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.136217] APIC: Switch to symmetric I/O mode setup
[    0.137109] x2apic enabled
[    0.137774] APIC: Switched APIC routing to: physical x2apic
[    0.139517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.140478] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.142079] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.143184] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.144080] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.145082] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.146081] Spectre V2 : Mitigation: Retpolines
[    0.146788] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.147080] Speculative Store Bypass: Vulnerable
[    0.147805] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.148080] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.149079] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.150080] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.151079] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.169621] Freeing SMP alternatives memory: 56K
[    0.170082] pid_max: default: 32768 minimum: 301
[    0.171092] LSM: initializing lsm=capability,landlock
[    0.172106] landlock: Up and running.
[    0.173094] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.174080] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.175244] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.176184] Performance Events: AMD PMU driver.
[    0.176934] ... version:                0
[    0.177082] ... bit width:              48
[    0.177712] ... generic registers:      4
[    0.178081] ... value mask:             0000ffffffffffff
[    0.178925] ... max period:             00007fffffffffff
[    0.179081] ... fixed-purpose events:   0
[    0.179698] ... event mask:             000000000000000f
[    0.180148] signal: max sigframe size: 1776
[    0.180853] rcu: Hierarchical SRCU implementation.
[    0.181082] rcu: 	Max phase no-delay instances is 400.
[    0.181917] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.182201] smp: Bringing up secondary CPUs ...
[    0.182957] smpboot: x86: Booting SMP configuration:
[    0.183085] .... node  #0, CPUs:      #1 #2 #3
[    0.217135] smp: Brought up 1 node, 4 CPUs
[    0.218743] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.219398] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3524K init, 2028K bss, 47760K reserved, 0K cma-reserved)
[    0.220329] devtmpfs: initialized
[    0.221140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.222085] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.223120] pinctrl core: initialized pinctrl subsystem
[    0.224951] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.225166] thermal_sys: Registered thermal governor 'step_wise'
[    0.225167] thermal_sys: Registered thermal governor 'user_space'
[    0.226092] cpuidle: using governor menu
[    0.227825] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.228083] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.229087] PCI: Using configuration type 1 for base access
[    0.229991] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.248081] raid6: sse2x4   gen() 24165 MB/s
[    0.265083] raid6: sse2x2   gen() 26145 MB/s
[    0.282088] raid6: sse2x1   gen()  8625 MB/s
[    0.282802] raid6: using algorithm sse2x2 gen() 26145 MB/s
[    0.300081] raid6: .... xor() 19686 MB/s, rmw enabled
[    0.300914] raid6: using ssse3x2 recovery algorithm
[    0.301140] ACPI: Added _OSI(Module Device)
[    0.301785] ACPI: Added _OSI(Processor Device)
[    0.302082] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.302860] ACPI: Added _OSI(Processor Aggregator Device)
[    0.303476] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.305133] ACPI: Interpreter enabled
[    0.305758] ACPI: PM: (supports S0 S3 S5)
[    0.306083] ACPI: Using IOAPIC for interrupt routing
[    0.306847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.307082] PCI: Using E820 reservations for host bridge windows
[    0.308084] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.309770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.310085] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.311102] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.312106] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.313114] PCI host bridge to bus 0000:00
[    0.313753] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.314082] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.315082] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.316082] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.317082] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.318081] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.319082] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.320012] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.320494] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.322082] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.323748] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.328083] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.330082] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.331595] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.333071] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.334082] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.337537] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.339557] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.342019] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.344082] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.346057] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.348066] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.348122] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.349555] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.351082] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.352677] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.356082] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.358623] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.360473] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.361720] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.363499] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.364802] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.366328] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.367717] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.368383] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.370699] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.371419] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.372276] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.375312] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.376556] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.377816] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.379494] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.380834] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.381129] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.382105] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.383086] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.384046] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.384119] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.385072] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.385122] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.386048] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.386088] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.387014] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.387087] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.388001] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.388084] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.389001] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.389084] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.390185] iommu: Default domain type: Translated
[    0.390921] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.391121] SCSI subsystem initialized
[    0.391713] ACPI: bus type USB registered
[    0.392092] usbcore: registered new interface driver usbfs
[    0.392926] usbcore: registered new interface driver hub
[    0.393084] usbcore: registered new device driver usb
[    0.393861] pps_core: LinuxPPS API ver. 1 registered
[    0.394081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.395084] PTP clock support registered
[    0.395698] Bluetooth: Core ver 2.22
[    0.396087] NET: Registered PF_BLUETOOTH protocol family
[    0.396894] Bluetooth: HCI device and connection manager initialized
[    0.397082] Bluetooth: HCI socket layer initialized
[    0.397850] Bluetooth: L2CAP socket layer initialized
[    0.398083] Bluetooth: SCO socket layer initialized
[    0.398852] PCI: Using ACPI for IRQ routing
[    0.443212] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.444076] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.444079] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.444084] vgaarb: loaded
[    0.444544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.445082] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.449131] clocksource: Switched to clocksource kvm-clock
[    0.450054] pnp: PnP ACPI init
[    0.450615] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.451878] pnp: PnP ACPI: found 5 devices
[    0.460340] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.461732] NET: Registered PF_INET protocol family
[    0.462512] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.463743] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.465051] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.466248] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.467443] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.468555] TCP: Hash tables configured (established 4096 bind 4096)
[    0.469539] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.470542] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.471635] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.472715] RPC: Registered named UNIX socket transport module.
[    0.473634] RPC: Registered udp transport module.
[    0.474363] RPC: Registered tcp transport module.
[    0.475085] RPC: Registered tcp-with-tls transport module.
[    0.475924] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.476907] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.477849] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.478784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.479829] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.480877] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.481943] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.483159] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.484983] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.486124] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.487253] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.488467] PCI: CLS 0 bytes, default 64
[    0.489146] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.491738] Initialise system trusted keyrings
[    0.492525] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.493650] NFS: Registering the id_resolver key type
[    0.494437] Key type id_resolver registered
[    0.495085] Key type id_legacy registered
[    0.496214] Key type cifs.idmap registered
[    0.515868] xor: automatically using best checksumming function   avx       
[    0.518611] Key type asymmetric registered
[    0.520220] Asymmetric key parser 'x509' registered
[    0.522140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.525008] io scheduler mq-deadline registered
[    0.526769] io scheduler kyber registered
[    0.528347] io scheduler bfq registered
[    0.530324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.533371] ACPI: button: Power Button [PWRF]
[    0.536020] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.540215] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.544911] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.551131] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.555094] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.556478] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.557755] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.560009] Linux agpgart interface v0.103
[    0.560880] ACPI: bus type drm_connector registered
[    0.562341] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.563856] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.568793] Console: switching to colour dummy device 80x25
[    0.570688] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.570690] [drm] features: -context_init
[    0.575658] [drm] number of scanouts: 1
[    0.576764] [drm] number of cap sets: 0
[    0.578186] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.580847] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.597250] Console: switching to colour frame buffer device 160x50
[    0.613309] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.619619] brd: module loaded
[    0.622126] loop: module loaded
[    0.623718] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.628260] virtio_blk virtio3: [vda] 1193352 512-byte logical blocks (611 MB/583 MiB)
[    0.635254] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.638478] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.640559] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.643140] scsi host0: ahci
[    0.644229] scsi host1: ahci
[    0.645362] scsi host2: ahci
[    0.646435] scsi host3: ahci
[    0.647458] scsi host4: ahci
[    0.648469] scsi host5: ahci
[    0.649317] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.651575] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.653845] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.657225] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.659479] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.661735] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.665945] e100: Intel(R) PRO/100 Network Driver
[    0.667052] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.667872] e1000: Intel(R) PRO/1000 Network Driver
[    0.668582] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.669445] e1000e: Intel(R) PRO/1000 Network Driver
[    0.670188] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.671063] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.671854] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.673236] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.674733] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.675910] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.676924] hub 1-0:1.0: USB hub found
[    0.677486] hub 1-0:1.0: 2 ports detected
[    0.678726] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.680827] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.684223] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.691849] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.694246] hub 2-0:1.0: USB hub found
[    0.695731] hub 2-0:1.0: 6 ports detected
[    0.717928] hub 1-0:1.0: USB hub found
[    0.719514] hub 1-0:1.0: 2 ports detected
[    0.721240] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.723369] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.726444] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.728988] hub 3-0:1.0: USB hub found
[    0.730492] hub 3-0:1.0: 2 ports detected
[    0.733385] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.735772] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.738892] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.741370] hub 4-0:1.0: USB hub found
[    0.742884] hub 4-0:1.0: 2 ports detected
[    0.744667] usbcore: registered new interface driver usb-storage
[    0.747126] usbcore: registered new interface driver usbserial_generic
[    0.749726] usbserial: USB Serial support registered for generic
[    0.752136] usbcore: registered new interface driver ftdi_sio
[    0.754342] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.757196] usbcore: registered new interface driver pl2303
[    0.759355] usbserial: USB Serial support registered for pl2303
[    0.761677] i8042: PNP: No PS/2 controller found.
[    0.763599] mousedev: PS/2 mouse device common for all mice
[    0.765956] rtc_cmos 00:03: RTC can wake from S4
[    0.768600] rtc_cmos 00:03: registered as rtc0
[    0.770477] rtc_cmos 00:03: setting system clock to 2025-06-02T05:00:02 UTC (1748840402)
[    0.773712] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.776977] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.777274] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.780375] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.782702] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.785377] sdhci: Secure Digital Host Controller Interface driver
[    0.785380] sdhci: Copyright(c) Pierre Ossman
[    0.785405] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.785518] usbcore: registered new interface driver usbhid
[    0.796894] usbhid: USB HID core driver
[    0.798426] u32 classifier
[    0.799510]     input device check on
[    0.800983]     Actions configured
[    0.802421] NET: Registered PF_INET6 protocol family
[    0.804791] Segment Routing with IPv6
[    0.806261] In-situ OAM (IOAM) with IPv6
[    0.807844] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.810276] NET: Registered PF_PACKET protocol family
[    0.812273] Bridge firewalling registered
[    0.813868] l2tp_core: L2TP core driver, V2.0
[    0.815569] Key type dns_resolver registered
[    0.817366] NET: Registered PF_VSOCK protocol family
[    0.819984] IPI shorthand broadcast: enabled
[    0.823546] sched_clock: Marking stable (703007701, 119803875)->(904943949, -82132373)
[    0.826567] registered taskstats version 1
[    0.827269] Loading compiled-in X.509 certificates
[    0.828719] Key type .fscrypt registered
[    0.829331] Key type fscrypt-provisioning registered
[    0.830254] Btrfs loaded, zoned=no, fsverity=no
[    0.831740] Key type encrypted registered
[    0.832438] printk: legacy console [netcon0] enabled
[    0.833199] netconsole: network logging started
[    0.937940] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.976642] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.979339] ata6: SATA link down (SStatus 0 SControl 300)
[    0.981724] ata5: SATA link down (SStatus 0 SControl 300)
[    0.984042] ata2: SATA link down (SStatus 0 SControl 300)
[    0.986390] ata1: SATA link down (SStatus 0 SControl 300)
[    0.988774] ata4: SATA link down (SStatus 0 SControl 300)
[    0.991069] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.993261] ata3.00: applying bridge limits
[    0.995079] ata3.00: configured for UDMA/100
[    0.997243] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.027191] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.029820] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.053854] IP-Config: Complete:
[    1.055170]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.059072]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.061266]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.061269]      nameserver0=8.8.8.8
[    1.065596] clk: Disabling unused clocks
[    1.067739] md: Waiting for all devices to be available before autodetect
[    1.070529] md: If you don't use raid, use raid=noautodetect
[    1.073164] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.076841] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.080381] md: Autodetecting RAID arrays.
[    1.081878] md: autorun ...
[    1.082762] md: ... autorun DONE.
[    1.087941] EXT4-fs (vda): mounted filesystem fd81ad0a-dc36-4377-8a53-c525cb466654 r/w with ordered data mode. Quota mode: disabled.
[    1.091717] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.093754] devtmpfs: mounted
[    1.095942] Freeing unused kernel image (initmem) memory: 3524K
[    1.097858] Write protecting the kernel read-only data: 26624k
[    1.100072] Freeing unused kernel image (rodata/data gap) memory: 284K
[    1.102119] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.173800] udevd[152]: starting version 3.2.14
[    1.180938] udevd[153]: starting eudev-3.2.14
[    1.193830] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.331033] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.386222] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.451761] EXT4-fs (vda): re-mounted fd81ad0a-dc36-4377-8a53-c525cb466654 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.124 [1;34m [seatd/server.c:145] New client connected (pid: 355, uid: 1000, gid: 1000)[0m
00:00:00.124 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.124 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDefpm8aWa24T1htNhZ9YWteNheKompIAxtdhp1OuGJlOiwr467+O0IsfRO/5FkqKfJGSpvud76dQ3tDloqSGdsvMLkBEupAwRREGwXGs5aHN42SNIuXieheeayiACAHdBeXSfBpJQPzuTEWz7AjJEM9VOtxN7mZM+z14GqvKSKNSsd1r5kzW0Dk4o7nFUsa9cd0tuieYftzsbnPCJeSJg3NaHOz/vCjhhzNXrbyxY12P3IciOmymfgri2OE9Xu64wPxAGdimJCRclKnUU0ee1PCoAfmM4IZkLZdy92F3qLX1CNg4MfmjgJPd2zyAXLBunmzZhlNIk7TQEE+/a9k4rP root@qemux86-64
Fingerprint: SHA256:/O6s7AWlGG2k7aaTTWSl33hb1UgkaFz5lM9FD3hshYY
dropbear.
Starting rpcbind daemon...done.[    1.907436] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

Starting bluetoo[    1.908458] Bluetooth: BNEP filters: protocol multicast
th: bluetoothd.[    1.909769] Bluetooth: BNEP socket layer initialized

Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
qemux86-64 login: 00:01:09.911 [1;34m [seatd/server.c:145] New client connected (pid: 5911, uid: 0, gid: 0)[0m
00:01:09.911 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:09.911 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
