[    0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun  5 02:14:18 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 437648350 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000002] tsc: Detected 2750.000 MHz processor
[    0.000960] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000992] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000994] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002863] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.003005] ACPI: Early table checksum verification disabled
[    0.003007] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.003012] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003016] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003019] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003021] ACPI: FACS 0x000000001FFE0000 000040
[    0.003022] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003024] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003025] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003027] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.003028] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.003029] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.003029] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.003030] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.003030] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.003031] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.003031] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.003078] Zone ranges:
[    0.003078]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.003080]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003081]   Normal   empty
[    0.003081] Movable zone start for each node
[    0.003081] Early memory node ranges
[    0.003082]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003083]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003083] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003187] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003208] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004151] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004505] ACPI: PM-Timer IO Port: 0x608
[    0.004512] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004535] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004537] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004538] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004539] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004540] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004541] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004543] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004543] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004545] TSC deadline timer available
[    0.004548] CPU topo: Max. logical packages:   1
[    0.004548] CPU topo: Max. logical dies:       1
[    0.004549] CPU topo: Max. dies per package:   1
[    0.004552] CPU topo: Max. threads per core:   1
[    0.004552] CPU topo: Num. cores per package:     4
[    0.004553] CPU topo: Num. threads per package:   4
[    0.004553] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004562] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004575] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004576] Booting paravirtualized kernel on KVM
[    0.004577] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004580] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004753] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004773] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004818] random: crng init done
[    0.004833] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004842] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004866] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005030] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005460] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005472] ftrace: allocating 54089 entries in 212 pages
[    0.014024] ftrace: allocated 212 pages with 4 groups
[    0.014046] Dynamic Preempt: full
[    0.014170] rcu: Preemptible hierarchical RCU implementation.
[    0.014171] rcu: 	RCU event tracing is enabled.
[    0.014171] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014172] 	All grace periods are expedited (rcu_expedited).
[    0.014172] 	Trampoline variant of Tasks RCU enabled.
[    0.014172] 	Rude variant of Tasks RCU enabled.
[    0.014173] 	Tracing variant of Tasks RCU enabled.
[    0.014173] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014173] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014177] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014178] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014179] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018772] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018952] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019001] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023998] Console: colour VGA+ 80x25
[    0.024033] printk: legacy console [ttyS0] enabled
[    0.141837] ACPI: Core revision 20240827
[    0.142593] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.144163] APIC: Switch to symmetric I/O mode setup
[    0.145166] x2apic enabled
[    0.145875] APIC: Switched APIC routing to: physical x2apic
[    0.147804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.148803] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.150542] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.151673] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.152543] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.153544] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.155543] Spectre V2 : Mitigation: Retpolines
[    0.156281] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.156543] Speculative Store Bypass: Vulnerable
[    0.157259] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.157543] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.158542] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.159543] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.160542] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.177892] Freeing SMP alternatives memory: 56K
[    0.178544] pid_max: default: 32768 minimum: 301
[    0.179264] LSM: initializing lsm=capability,landlock
[    0.179567] landlock: Up and running.
[    0.180557] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.181543] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.182693] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.183646] Performance Events: AMD PMU driver.
[    0.184405] ... version:                0
[    0.184545] ... bit width:              48
[    0.185191] ... generic registers:      4
[    0.185544] ... value mask:             0000ffffffffffff
[    0.186394] ... max period:             00007fffffffffff
[    0.186545] ... fixed-purpose events:   0
[    0.187167] ... event mask:             000000000000000f
[    0.187594] signal: max sigframe size: 1776
[    0.188288] rcu: Hierarchical SRCU implementation.
[    0.188545] rcu: 	Max phase no-delay instances is 400.
[    0.189403] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.189669] smp: Bringing up secondary CPUs ...
[    0.190431] smpboot: x86: Booting SMP configuration:
[    0.190548] .... node  #0, CPUs:      #1 #2 #3
[    0.224625] smp: Brought up 1 node, 4 CPUs
[    0.226212] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.226863] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 47760K reserved, 0K cma-reserved)
[    0.227719] devtmpfs: initialized
[    0.228547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.229547] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.230578] pinctrl core: initialized pinctrl subsystem
[    0.232250] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.232626] thermal_sys: Registered thermal governor 'step_wise'
[    0.232627] thermal_sys: Registered thermal governor 'user_space'
[    0.233554] cpuidle: using governor menu
[    0.234668] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.235546] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.236551] PCI: Using configuration type 1 for base access
[    0.237458] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.254545] raid6: sse2x4   gen() 24055 MB/s
[    0.271545] raid6: sse2x2   gen() 26068 MB/s
[    0.289550] raid6: sse2x1   gen()  7773 MB/s
[    0.290361] raid6: using algorithm sse2x2 gen() 26068 MB/s
[    0.307545] raid6: .... xor() 19741 MB/s, rmw enabled
[    0.308445] raid6: using ssse3x2 recovery algorithm
[    0.308605] ACPI: Added _OSI(Module Device)
[    0.309324] ACPI: Added _OSI(Processor Device)
[    0.309546] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.310358] ACPI: Added _OSI(Processor Aggregator Device)
[    0.310942] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.312573] ACPI: Interpreter enabled
[    0.313223] ACPI: PM: (supports S0 S3 S5)
[    0.313546] ACPI: Using IOAPIC for interrupt routing
[    0.314435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.314545] PCI: Using E820 reservations for host bridge windows
[    0.315586] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.317399] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.317549] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.318566] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.319570] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.320579] PCI host bridge to bus 0000:00
[    0.321286] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.321545] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.322545] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.323545] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.324545] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.325545] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.326545] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.327537] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.327980] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.329546] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.331262] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.334424] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.335547] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.337104] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.338416] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.339426] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.343417] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.344926] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.346546] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.349041] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.350546] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.352961] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.353588] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.355173] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.356546] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.358110] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.361062] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.363127] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.365545] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.367080] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.368920] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.370676] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.372960] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.374227] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.374855] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.377666] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.379898] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.380721] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.383809] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.385025] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.386272] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.387970] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.389296] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.389591] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.390587] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.391589] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.392587] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.393585] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.394588] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.395585] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.396581] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.397549] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.398548] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.399548] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.400550] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.401548] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.402548] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.403547] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.404733] iommu: Default domain type: Translated
[    0.405546] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.406585] SCSI subsystem initialized
[    0.407272] ACPI: bus type USB registered
[    0.407556] usbcore: registered new interface driver usbfs
[    0.408523] usbcore: registered new interface driver hub
[    0.408548] usbcore: registered new device driver usb
[    0.409416] pps_core: LinuxPPS API ver. 1 registered
[    0.409545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.410546] PTP clock support registered
[    0.411244] Bluetooth: Core ver 2.22
[    0.411549] NET: Registered PF_BLUETOOTH protocol family
[    0.412469] Bluetooth: HCI device and connection manager initialized
[    0.412546] Bluetooth: HCI socket layer initialized
[    0.413379] Bluetooth: L2CAP socket layer initialized
[    0.413547] Bluetooth: SCO socket layer initialized
[    0.414370] PCI: Using ACPI for IRQ routing
[    0.461824] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.462542] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.462542] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.462547] vgaarb: loaded
[    0.463042] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.463545] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.469585] clocksource: Switched to clocksource kvm-clock
[    0.470608] pnp: PnP ACPI init
[    0.471244] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.472632] pnp: PnP ACPI: found 5 devices
[    0.480478] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.482085] NET: Registered PF_INET protocol family
[    0.482954] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.484327] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.485777] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.487127] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.488443] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.489700] TCP: Hash tables configured (established 4096 bind 4096)
[    0.490800] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.491947] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.493142] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.494274] RPC: Registered named UNIX socket transport module.
[    0.495284] RPC: Registered udp transport module.
[    0.496092] RPC: Registered tcp transport module.
[    0.496891] RPC: Registered tcp-with-tls transport module.
[    0.497813] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.498931] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.499984] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.501006] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.502201] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.503349] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.504504] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.505843] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.507978] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.509179] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.510381] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.511689] PCI: CLS 0 bytes, default 64
[    0.512430] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.514779] Initialise system trusted keyrings
[    0.515611] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.516820] NFS: Registering the id_resolver key type
[    0.517694] Key type id_resolver registered
[    0.518399] Key type id_legacy registered
[    0.519367] Key type cifs.idmap registered
[    0.527120] xor: automatically using best checksumming function   avx       
[    0.528348] Key type asymmetric registered
[    0.529071] Asymmetric key parser 'x509' registered
[    0.529926] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.531184] io scheduler mq-deadline registered
[    0.531981] io scheduler kyber registered
[    0.532669] io scheduler bfq registered
[    0.533501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.535642] ACPI: button: Power Button [PWRF]
[    0.538034] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.541104] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.542865] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.549722] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.551335] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.552517] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.553903] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.556556] Linux agpgart interface v0.103
[    0.557664] ACPI: bus type drm_connector registered
[    0.558630] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.559497] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.563394] Console: switching to colour dummy device 80x25
[    0.565929] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.565932] [drm] features: -context_init
[    0.569061] [drm] number of scanouts: 1
[    0.569680] [drm] number of cap sets: 0
[    0.570729] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.572998] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.597562] Console: switching to colour frame buffer device 160x50
[    0.616767] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.621826] brd: module loaded
[    0.623768] loop: module loaded
[    0.624989] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.628600] virtio_blk virtio3: [vda] 1193840 512-byte logical blocks (611 MB/583 MiB)
[    0.633936] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.636574] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.638680] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.641708] scsi host0: ahci
[    0.642980] scsi host1: ahci
[    0.644207] scsi host2: ahci
[    0.645485] scsi host3: ahci
[    0.646761] scsi host4: ahci
[    0.648022] scsi host5: ahci
[    0.649023] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.651715] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.654401] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.657071] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.659753] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.662457] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.667229] e100: Intel(R) PRO/100 Network Driver
[    0.668924] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.670724] e1000: Intel(R) PRO/1000 Network Driver
[    0.672308] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.674199] e1000e: Intel(R) PRO/1000 Network Driver
[    0.675812] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.677769] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.679542] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.682333] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.683704] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.685073] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.691614] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.692891] hub 1-0:1.0: USB hub found
[    0.693547] hub 1-0:1.0: 6 ports detected
[    0.694354] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.696103] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.698691] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.700801] hub 2-0:1.0: USB hub found
[    0.702074] hub 2-0:1.0: 2 ports detected
[    0.704245] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.706035] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.708711] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.710784] hub 3-0:1.0: USB hub found
[    0.712051] hub 3-0:1.0: 2 ports detected
[    0.714195] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.716082] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.718647] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.720712] hub 4-0:1.0: USB hub found
[    0.721985] hub 4-0:1.0: 2 ports detected
[    0.723639] usbcore: registered new interface driver usb-storage
[    0.725799] usbcore: registered new interface driver usbserial_generic
[    0.727856] usbserial: USB Serial support registered for generic
[    0.729821] usbcore: registered new interface driver ftdi_sio
[    0.731668] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.734025] usbcore: registered new interface driver pl2303
[    0.735818] usbserial: USB Serial support registered for pl2303
[    0.737769] i8042: PNP: No PS/2 controller found.
[    0.739382] mousedev: PS/2 mouse device common for all mice
[    0.741336] rtc_cmos 00:03: RTC can wake from S4
[    0.743557] rtc_cmos 00:03: registered as rtc0
[    0.745169] rtc_cmos 00:03: setting system clock to 2025-06-12T03:23:58 UTC (1749698638)
[    0.747834] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.750528] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.750722] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.751659] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.754619] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.758227] sdhci: Secure Digital Host Controller Interface driver
[    0.760333] sdhci: Copyright(c) Pierre Ossman
[    0.761803] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.763670] usbcore: registered new interface driver usbhid
[    0.765465] usbhid: USB HID core driver
[    0.766719] u32 classifier
[    0.767532]     input device check on
[    0.768659]     Actions configured
[    0.769874] NET: Registered PF_INET6 protocol family
[    0.771743] Segment Routing with IPv6
[    0.773004] In-situ OAM (IOAM) with IPv6
[    0.774446] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.776315] NET: Registered PF_PACKET protocol family
[    0.777893] Bridge firewalling registered
[    0.779145] l2tp_core: L2TP core driver, V2.0
[    0.780576] Key type dns_resolver registered
[    0.782105] NET: Registered PF_VSOCK protocol family
[    0.784258] IPI shorthand broadcast: enabled
[    0.787287] sched_clock: Marking stable (659005811, 127585289)->(869895390, -83304290)
[    0.789974] registered taskstats version 1
[    0.791367] Loading compiled-in X.509 certificates
[    0.794144] Key type .fscrypt registered
[    0.795432] Key type fscrypt-provisioning registered
[    0.797389] Btrfs loaded, zoned=no, fsverity=no
[    0.799616] Key type encrypted registered
[    0.801108] printk: legacy console [netcon0] enabled
[    0.802754] netconsole: network logging started
[    0.930606] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.975343] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.976554] ata2: SATA link down (SStatus 0 SControl 300)
[    0.977642] ata1: SATA link down (SStatus 0 SControl 300)
[    0.979751] ata5: SATA link down (SStatus 0 SControl 300)
[    0.982362] ata6: SATA link down (SStatus 0 SControl 300)
[    0.983371] ata4: SATA link down (SStatus 0 SControl 300)
[    0.984274] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.986709] ata3.00: applying bridge limits
[    0.988699] ata3.00: configured for UDMA/100
[    0.991023] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.014992] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.016081] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.038619] IP-Config: Complete:
[    1.039745]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.042804]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.044853]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.044855]      nameserver0=8.8.8.8
[    1.048522] clk: Disabling unused clocks
[    1.050139] md: Waiting for all devices to be available before autodetect
[    1.051868] md: If you don't use raid, use raid=noautodetect
[    1.053404] md: Autodetecting RAID arrays.
[    1.054485] md: autorun ...
[    1.055231] md: ... autorun DONE.
[    1.059905] EXT4-fs (vda): mounted filesystem 3e3a98db-4273-4270-99af-ff4f64f8439b r/w with ordered data mode. Quota mode: disabled.
[    1.063107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.064898] devtmpfs: mounted
[    1.066785] Freeing unused kernel image (initmem) memory: 3528K
[    1.068449] Write protecting the kernel read-only data: 26624k
[    1.070303] Freeing unused kernel image (rodata/data gap) memory: 284K
[    1.072140] Run /sbin/init as init process
[    1.075186] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.077180] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.136695] udevd[150]: starting version 3.2.14
[    1.143920] udevd[151]: starting eudev-3.2.14
[    1.190739] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.321184] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.373828] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.438838] EXT4-fs (vda): re-mounted 3e3a98db-4273-4270-99af-ff4f64f8439b.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.122 [1;34m [seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.122 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.126 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCbmds1ugGfWJNm0/6IAur2kKmDlb3ufHgV2PpwV+ilg9/goASUqhO53NdlT5cYkRNiY9LVvG4oDvidyCqHDUk/F1xBCtb+t199XzJfd993lrtrPxrxxkUc2rgk6QuSWB4D2+xxFHRvtS4uGiTJ9fCR+aC1fNiRrjc73/fH1atAIhqfJK2ToCZz+i8OL8YB52+aRCHZ6NHjktgNtE/Pl0Kjz5q4sm//lajMP37UMZtKrSIldruHoUOwuRhF3aspUf6mdWRdMVCX9r03O8oZ+bTGZBJfVv9C2WIzPd3qMY9X2RuJtEoINWUECtoYLls8/WjNyzuWh1BWrk5+ZxhCh2gp root@qemux86-64
Fingerprint: SHA256:V71yeD8H2OvrzEFBK0Vs99Aybl6U/baXCCueufmj3Pg[    2.081924] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    2.083864] Bluetooth: BNEP filters: protocol multicast
dropbear.[    2.085860] Bluetooth: BNEP socket layer initialized

Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:04.616 [1;34m [seatd/server.c:145] New client connected (pid: 5910, uid: 0, gid: 0)[0m
00:01:04.619 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:04.623 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
