[ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 17 pages/cpu s40724 r8192 d20716 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 495496K/524288K available (12288K kernel code, 1431K rwdata, 2772K rodata, 2048K init, 364K bss, 28792K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 42149 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000102] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000209] Switching to timer-based delay loop, resolution 16ns [ 0.016186] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.021518] Console: colour dummy device 80x30 [ 0.022529] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.022681] CPU: Testing write buffer coherency: ok [ 0.023720] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.023856] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.023921] pid_max: default: 32768 minimum: 301 [ 0.024890] LSM: initializing lsm=capability,landlock,integrity [ 0.025263] landlock: Up and running. [ 0.027072] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.027110] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.044775] /cpus/cpu@0 missing clock-frequency property [ 0.045012] /cpus/cpu@1 missing clock-frequency property [ 0.045045] /cpus/cpu@2 missing clock-frequency property [ 0.045077] /cpus/cpu@3 missing clock-frequency property [ 0.045176] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.054060] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.054374] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.054781] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.055453] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.056251] rcu: Hierarchical SRCU implementation. [ 0.056280] rcu: Max phase no-delay instances is 1000. [ 0.059743] smp: Bringing up secondary CPUs ... [ 0.064158] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.064298] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.071827] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.071930] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.074287] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.074366] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.075003] smp: Brought up 1 node, 4 CPUs [ 0.075078] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.075129] CPU: All CPU(s) started in SVC mode. [ 0.094279] devtmpfs: initialized [ 0.103159] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.120154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.120899] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.137464] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.140688] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.146479] cpuidle: using governor ladder [ 0.149784] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.149850] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.151130] Serial: AMBA PL011 UART driver [ 0.175873] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.176942] printk: console [ttyAMA0] enabled [ 0.204323] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.215889] cryptd: max_cpu_qlen set to 1000 [ 0.385993] raid6: neonx8 gen() 454 MB/s [ 0.556986] raid6: neonx4 gen() 1695 MB/s [ 0.730011] raid6: neonx2 gen() 2121 MB/s [ 0.903373] raid6: neonx1 gen() 1180 MB/s [ 1.076461] raid6: int32x8 gen() 156 MB/s [ 1.249039] raid6: int32x4 gen() 253 MB/s [ 1.422228] raid6: int32x2 gen() 777 MB/s [ 1.594250] raid6: int32x1 gen() 618 MB/s [ 1.594678] raid6: using algorithm neonx2 gen() 2121 MB/s [ 1.766975] raid6: .... xor() 1144 MB/s, rmw enabled [ 1.767459] raid6: using neon recovery algorithm [ 1.770600] SCSI subsystem initialized [ 1.771576] usbcore: registered new interface driver usbfs [ 1.772176] usbcore: registered new interface driver hub [ 1.772568] usbcore: registered new device driver usb [ 1.773036] pps_core: LinuxPPS API ver. 1 registered [ 1.773166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.773427] PTP clock support registered [ 1.784468] vgaarb: loaded [ 1.789844] clocksource: Switched to clocksource arch_sys_counter [ 1.853307] NET: Registered PF_INET protocol family [ 1.856257] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.870562] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.871732] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.872708] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.873795] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.878225] TCP: Hash tables configured (established 4096 bind 4096) [ 1.881260] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.882173] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.884566] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.889788] RPC: Registered named UNIX socket transport module. [ 1.890113] RPC: Registered udp transport module. [ 1.890330] RPC: Registered tcp transport module. [ 1.890531] RPC: Registered tcp-with-tls transport module. [ 1.890756] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.891154] PCI: CLS 0 bytes, default 64 [ 1.903552] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.906718] NFS: Registering the id_resolver key type [ 1.907663] Key type id_resolver registered [ 1.907799] Key type id_legacy registered [ 1.911344] Key type cifs.idmap registered [ 2.051495] xor: measuring software checksum speed [ 2.054122] arm4regs : 1495 MB/sec [ 2.056221] 8regs : 1812 MB/sec [ 2.058416] 32regs : 1704 MB/sec [ 2.061041] neon : 1520 MB/sec [ 2.061350] xor: using function: 8regs (1812 MB/sec) [ 2.061680] async_tx: api initialized (async) [ 2.062337] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.062858] io scheduler mq-deadline registered [ 2.063179] io scheduler kyber registered [ 2.066208] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.067193] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.068148] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.069472] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.071164] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.071667] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.071850] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.072008] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.073213] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 2.075868] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 2.076242] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 2.076421] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.076604] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.077330] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 2.077508] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.078305] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 2.078486] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.078654] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.080383] PCI: bus0: Fast back to back transfers disabled [ 2.081593] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 2.081959] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 2.082189] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 2.082396] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 2.082558] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 2.082723] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 2.083712] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.090502] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.092750] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.161983] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.162771] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.162792] [drm] features: -context_init [ 2.164318] [drm] number of scanouts: 1 [ 2.164620] [drm] number of cap sets: 0 [ 2.174803] printk: console [hvc0] enabled [ 2.175658] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 2.256811] Console: switching to colour frame buffer device 160x50 [ 2.273808] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.306414] brd: module loaded [ 2.307346] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.311960] virtio_blk virtio1: [vda] 882662 512-byte logical blocks (452 MB/431 MiB) [ 2.333667] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.335237] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.342993] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.349525] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.350415] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.351650] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.363707] hub 1-0:1.0: USB hub found [ 2.365366] hub 1-0:1.0: 4 ports detected [ 2.371511] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.375291] hub 2-0:1.0: USB hub found [ 2.376420] hub 2-0:1.0: 4 ports detected [ 2.386524] rtc-pl031 9010000.pl031: registered as rtc0 [ 2.387705] rtc-pl031 9010000.pl031: setting system clock to 2025-06-20T20:00:49 UTC (1750449649) [ 2.390970] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.394280] usbcore: registered new interface driver usbhid [ 2.394890] usbhid: USB HID core driver [ 2.396300] u32 classifier [ 2.396629] input device check on [ 2.397033] Actions configured [ 2.403508] NET: Registered PF_INET6 protocol family [ 2.417466] Segment Routing with IPv6 [ 2.419529] In-situ OAM (IOAM) with IPv6 [ 2.421712] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.428207] NET: Registered PF_PACKET protocol family [ 2.431055] Bridge firewalling registered [ 2.433053] Key type dns_resolver registered [ 2.434772] NET: Registered PF_VSOCK protocol family [ 2.437128] Registering SWP/SWPB emulation handler [ 2.469305] registered taskstats version 1 [ 2.486864] Key type .fscrypt registered [ 2.487367] Key type fscrypt-provisioning registered [ 2.492603] Btrfs loaded, zoned=no, fsverity=no [ 2.521208] Key type encrypted registered [ 2.523177] printk: console [netcon0] enabled [ 2.523697] netconsole: network logging started [ 2.579767] IP-Config: Complete: [ 2.580204] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 2.581329] host=192.168.7.2, domain=, nis-domain=(none) [ 2.581919] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.581956] nameserver0=8.8.8.8 [ 2.584994] clk: Disabling unused clocks [ 2.588377] md: Waiting for all devices to be available before autodetect [ 2.589106] md: If you don't use raid, use raid=noautodetect [ 2.589927] md: Autodetecting RAID arrays. [ 2.590362] md: autorun ... [ 2.590661] md: ... autorun DONE. [ 2.634942] EXT4-fs (vda): mounted filesystem d4d0d1ff-2dcf-4198-a499-68270ae982bc r/w with ordered data mode. Quota mode: disabled. [ 2.637281] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.640070] devtmpfs: mounted [ 2.723222] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.830108] Freeing unused kernel image (initmem) memory: 2048K [ 2.987998] Run /sbin/init as init process [ 3.039389] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.043719] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 INIT: version 3.04 booting [ 3.189057] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 3.382162] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.450550] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 5.129408] udevd[131]: starting version 3.2.14 [ 5.208631] udevd[132]: starting eudev-3.2.14 [ 7.069655] EXT4-fs (vda): re-mounted d4d0d1ff-2dcf-4198-a499-68270ae982bc r/w. Quota mode: disabled. [ 7.637713] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.92-yocto-standard #1 SMP PREEMPT Wed May 28 17:30:47 UTC 2025 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 20 20:01:01 2025 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.10 qemuarm /dev/hvc0 qemuarm login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-lNJcVd2IJt,guid=c75f7376dd2c7b91550590e26855be02 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[559]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=543 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[559]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:581): Gtk-WARNING **: 20:01:15.675: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:581): WARNING **: 20:01:15.707: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format