[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 828166680 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2750.000 MHz processor [ 0.000975] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001008] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001011] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001062] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002913] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.005160] ACPI: Early table checksum verification disabled [ 0.005163] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.005169] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005174] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005178] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005180] ACPI: FACS 0x000000007FFE0000 000040 [ 0.005181] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005183] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005184] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005186] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005187] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.005188] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.005188] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.005189] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.005189] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.005190] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.005190] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.005229] Zone ranges: [ 0.005229] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005230] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005231] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005232] Movable zone start for each node [ 0.005233] Early memory node ranges [ 0.005233] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005234] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.005235] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005236] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.006012] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006033] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.081567] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.081618] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.082001] ACPI: PM-Timer IO Port: 0x608 [ 0.082013] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.082044] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.082047] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.082049] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.082050] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.082051] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.082051] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.082054] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.082055] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.082058] TSC deadline timer available [ 0.082063] CPU topo: Max. logical packages: 1 [ 0.082063] CPU topo: Max. logical dies: 1 [ 0.082064] CPU topo: Max. dies per package: 1 [ 0.082067] CPU topo: Max. threads per core: 1 [ 0.082068] CPU topo: Num. cores per package: 4 [ 0.082068] CPU topo: Num. threads per package: 4 [ 0.082068] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.082083] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.082103] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.082104] Booting paravirtualized kernel on KVM [ 0.082106] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.082111] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.083018] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.083043] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.083098] random: crng init done [ 0.106512] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.108353] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.108388] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.109492] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.109496] software IO TLB: area num 4. [ 0.109497] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.114402] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.114423] ftrace: allocating 54089 entries in 212 pages [ 0.124601] ftrace: allocated 212 pages with 4 groups [ 0.124629] Dynamic Preempt: full [ 0.125287] rcu: Preemptible hierarchical RCU implementation. [ 0.125288] rcu: RCU event tracing is enabled. [ 0.125288] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.125289] All grace periods are expedited (rcu_expedited). [ 0.125290] Trampoline variant of Tasks RCU enabled. [ 0.125290] Rude variant of Tasks RCU enabled. [ 0.125291] Tracing variant of Tasks RCU enabled. [ 0.125291] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.125292] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.125296] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.125297] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.125298] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.130816] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.131006] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.131077] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.137459] Console: colour VGA+ 80x25 [ 0.137496] printk: legacy console [ttyS0] enabled [ 0.267312] ACPI: Core revision 20240827 [ 0.268097] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.269736] APIC: Switch to symmetric I/O mode setup [ 0.272607] x2apic enabled [ 0.273376] APIC: Switched APIC routing to: physical x2apic [ 0.275544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.276579] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.278503] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.279673] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.280504] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.281505] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.282505] Spectre V2 : Mitigation: Retpolines [ 0.283503] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.284504] Speculative Store Bypass: Vulnerable [ 0.285515] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.286503] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.287503] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.288504] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.289503] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.310363] Freeing SMP alternatives memory: 56K [ 0.310509] pid_max: default: 32768 minimum: 301 [ 0.311524] LSM: initializing lsm=capability,landlock [ 0.312534] landlock: Up and running. [ 0.313528] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.314509] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.315752] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.316681] Performance Events: AMD PMU driver. [ 0.317510] ... version: 0 [ 0.318424] ... bit width: 48 [ 0.318508] ... generic registers: 4 [ 0.319348] ... value mask: 0000ffffffffffff [ 0.319506] ... max period: 00007fffffffffff [ 0.320507] ... fixed-purpose events: 0 [ 0.321382] ... event mask: 000000000000000f [ 0.321578] signal: max sigframe size: 1776 [ 0.322540] rcu: Hierarchical SRCU implementation. [ 0.323508] rcu: Max phase no-delay instances is 400. [ 0.324544] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.325676] smp: Bringing up secondary CPUs ... [ 0.326593] smpboot: x86: Booting SMP configuration: [ 0.327513] .... node #0, CPUs: #1 #2 #3 [ 0.367508] smp: Brought up 1 node, 4 CPUs [ 0.368509] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 0.369883] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.370593] devtmpfs: initialized [ 0.371191] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.371509] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.372528] pinctrl core: initialized pinctrl subsystem [ 0.373681] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.374597] thermal_sys: Registered thermal governor 'step_wise' [ 0.374599] thermal_sys: Registered thermal governor 'user_space' [ 0.375516] cpuidle: using governor menu [ 0.377279] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.377507] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.378519] PCI: Using configuration type 1 for base access [ 0.379431] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.396506] raid6: sse2x4 gen() 18295 MB/s [ 0.413506] raid6: sse2x2 gen() 21824 MB/s [ 0.430508] raid6: sse2x1 gen() 8348 MB/s [ 0.431243] raid6: using algorithm sse2x2 gen() 21824 MB/s [ 0.448505] raid6: .... xor() 19093 MB/s, rmw enabled [ 0.449350] raid6: using ssse3x2 recovery algorithm [ 0.449578] ACPI: Added _OSI(Module Device) [ 0.450507] ACPI: Added _OSI(Processor Device) [ 0.451213] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.451506] ACPI: Added _OSI(Processor Aggregator Device) [ 0.452813] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.454567] ACPI: Interpreter enabled [ 0.455514] ACPI: PM: (supports S0 S3 S5) [ 0.456167] ACPI: Using IOAPIC for interrupt routing [ 0.456521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.457506] PCI: Using E820 reservations for host bridge windows [ 0.458550] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.461047] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.461510] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.462529] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.463533] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.464542] PCI host bridge to bus 0000:00 [ 0.465235] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.465506] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.466506] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.467506] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.468506] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.469506] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.470506] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.471436] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.471952] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.473507] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.475507] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.479507] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.481507] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.483107] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.484230] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.485274] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.488507] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.492485] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.493508] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.496507] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.498507] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.500922] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.501552] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.503054] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.504507] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.506172] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.508507] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.511148] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.514294] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.515113] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.516865] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.518195] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.519776] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.521886] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.522796] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.525088] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.525874] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.526724] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.529940] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.530921] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.532229] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.534506] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.536282] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.536559] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.537553] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.538551] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.539542] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.540550] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.541551] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.542549] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.543534] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.544510] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.545486] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.545512] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.546510] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.547510] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.548512] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.549510] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.550729] iommu: Default domain type: Translated [ 0.551506] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.552554] SCSI subsystem initialized [ 0.553194] ACPI: bus type USB registered [ 0.553521] usbcore: registered new interface driver usbfs [ 0.554410] usbcore: registered new interface driver hub [ 0.554514] usbcore: registered new device driver usb [ 0.555360] pps_core: LinuxPPS API ver. 1 registered [ 0.555506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.556510] PTP clock support registered [ 0.557640] Bluetooth: Core ver 2.22 [ 0.558238] NET: Registered PF_BLUETOOTH protocol family [ 0.558507] Bluetooth: HCI device and connection manager initialized [ 0.559506] Bluetooth: HCI socket layer initialized [ 0.560310] Bluetooth: L2CAP socket layer initialized [ 0.560509] Bluetooth: SCO socket layer initialized [ 0.561326] PCI: Using ACPI for IRQ routing [ 0.613404] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.613502] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.613502] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.613510] vgaarb: loaded [ 0.613979] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.614506] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.618559] clocksource: Switched to clocksource kvm-clock [ 0.619562] pnp: PnP ACPI init [ 0.620238] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.621573] pnp: PnP ACPI: found 5 devices [ 0.629372] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.630898] NET: Registered PF_INET protocol family [ 0.631795] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.634114] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.636229] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.637523] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.640296] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.642285] TCP: Hash tables configured (established 65536 bind 65536) [ 0.643388] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.644526] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.645754] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.646896] RPC: Registered named UNIX socket transport module. [ 0.647891] RPC: Registered udp transport module. [ 0.648667] RPC: Registered tcp transport module. [ 0.649440] RPC: Registered tcp-with-tls transport module. [ 0.650441] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.651512] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.652527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.653550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.654672] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.655798] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.656939] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.658291] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.659583] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.660808] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.662041] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.663333] PCI: CLS 0 bytes, default 64 [ 0.664039] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.665139] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.666432] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.668681] Initialise system trusted keyrings [ 0.670781] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.671993] NFS: Registering the id_resolver key type [ 0.672822] Key type id_resolver registered [ 0.673539] Key type id_legacy registered [ 0.674555] Key type cifs.idmap registered [ 0.682388] xor: automatically using best checksumming function avx [ 0.684307] Key type asymmetric registered [ 0.684991] Asymmetric key parser 'x509' registered [ 0.685798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.687006] io scheduler mq-deadline registered [ 0.687730] io scheduler kyber registered [ 0.688395] io scheduler bfq registered [ 0.689269] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.694521] ACPI: button: Power Button [PWRF] [ 0.695726] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.697553] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.699264] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.707071] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.708695] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.709860] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.711230] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.713377] Linux agpgart interface v0.103 [ 0.714154] ACPI: bus type drm_connector registered [ 0.715037] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.715916] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.719155] Console: switching to colour dummy device 80x25 [ 0.720209] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.720211] [drm] features: -context_init [ 0.722371] [drm] number of scanouts: 1 [ 0.723032] [drm] number of cap sets: 0 [ 0.723912] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.726350] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.730907] Console: switching to colour frame buffer device 160x50 [ 0.779650] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.787615] brd: module loaded [ 0.789095] loop: module loaded [ 0.789861] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.792132] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 0.795646] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.797267] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.798515] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.801898] scsi host0: ahci [ 0.802678] scsi host1: ahci [ 0.803484] scsi host2: ahci [ 0.804306] scsi host3: ahci [ 0.805179] scsi host4: ahci [ 0.805970] scsi host5: ahci [ 0.806579] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.809066] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.810706] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.812351] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.813996] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.815626] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.818526] e100: Intel(R) PRO/100 Network Driver [ 0.819417] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.820421] e1000: Intel(R) PRO/1000 Network Driver [ 0.821239] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.822172] e1000e: Intel(R) PRO/1000 Network Driver [ 0.822979] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.823911] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.824771] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.827261] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.828583] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.829857] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.832074] hub 1-0:1.0: USB hub found [ 0.833348] hub 1-0:1.0: 2 ports detected [ 0.835025] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.837960] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.841283] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.849564] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.852147] hub 2-0:1.0: USB hub found [ 0.853732] hub 2-0:1.0: 6 ports detected [ 0.876643] hub 1-0:1.0: USB hub found [ 0.878387] hub 1-0:1.0: 2 ports detected [ 0.880171] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.881073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.882357] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.883502] hub 3-0:1.0: USB hub found [ 0.884124] hub 3-0:1.0: 2 ports detected [ 0.885314] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.886343] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.889709] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.892428] hub 4-0:1.0: USB hub found [ 0.893969] hub 4-0:1.0: 2 ports detected [ 0.895786] usbcore: registered new interface driver usb-storage [ 0.898199] usbcore: registered new interface driver usbserial_generic [ 0.900971] usbserial: USB Serial support registered for generic [ 0.903532] usbcore: registered new interface driver ftdi_sio [ 0.905961] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.909085] usbcore: registered new interface driver pl2303 [ 0.911353] usbserial: USB Serial support registered for pl2303 [ 0.913738] i8042: PNP: No PS/2 controller found. [ 0.915777] mousedev: PS/2 mouse device common for all mice [ 0.918174] rtc_cmos 00:03: RTC can wake from S4 [ 0.920956] rtc_cmos 00:03: registered as rtc0 [ 0.922933] rtc_cmos 00:03: setting system clock to 2025-06-23T01:14:26 UTC (1750641266) [ 0.926239] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.929614] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.932781] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.938113] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.940567] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.943665] sdhci: Secure Digital Host Controller Interface driver [ 0.949201] sdhci: Copyright(c) Pierre Ossman [ 0.950972] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.953370] usbcore: registered new interface driver usbhid [ 0.955579] usbhid: USB HID core driver [ 0.957135] u32 classifier [ 0.958228] input device check on [ 0.959686] Actions configured [ 0.961157] NET: Registered PF_INET6 protocol family [ 0.963576] Segment Routing with IPv6 [ 0.965128] In-situ OAM (IOAM) with IPv6 [ 0.966728] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.969263] NET: Registered PF_PACKET protocol family [ 0.971292] Bridge firewalling registered [ 0.972905] l2tp_core: L2TP core driver, V2.0 [ 0.974653] Key type dns_resolver registered [ 0.976457] NET: Registered PF_VSOCK protocol family [ 0.979032] IPI shorthand broadcast: enabled [ 0.986173] sched_clock: Marking stable (843297929, 142491200)->(1076617119, -90827990) [ 0.989606] registered taskstats version 1 [ 0.990316] Loading compiled-in X.509 certificates [ 0.992869] Key type .fscrypt registered [ 0.993527] Key type fscrypt-provisioning registered [ 0.994471] Btrfs loaded, zoned=no, fsverity=no [ 0.995925] Key type encrypted registered [ 0.996649] printk: legacy console [netcon0] enabled [ 0.997513] netconsole: network logging started [ 1.090541] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.127522] ata4: SATA link down (SStatus 0 SControl 300) [ 1.130007] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.132308] ata5: SATA link down (SStatus 0 SControl 300) [ 1.134370] ata1: SATA link down (SStatus 0 SControl 300) [ 1.137207] ata6: SATA link down (SStatus 0 SControl 300) [ 1.139700] ata2: SATA link down (SStatus 0 SControl 300) [ 1.142006] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.143637] ata3.00: applying bridge limits [ 1.144632] ata3.00: configured for UDMA/100 [ 1.145921] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.175830] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.178637] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.201510] IP-Config: Complete: [ 1.202601] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.205763] host=192.168.7.4, domain=, nis-domain=(none) [ 1.207710] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.207712] nameserver0=8.8.8.8 [ 1.211841] clk: Disabling unused clocks [ 1.213712] md: Waiting for all devices to be available before autodetect [ 1.215461] md: If you don't use raid, use raid=noautodetect [ 1.216953] md: Autodetecting RAID arrays. [ 1.218042] md: autorun ... [ 1.218779] md: ... autorun DONE. [ 1.226272] EXT4-fs (vda): mounted filesystem 8fc65865-6a0b-489c-a3c0-2f2c6583f3ea r/w with ordered data mode. Quota mode: disabled. [ 1.229527] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.231208] devtmpfs: mounted [ 1.233191] Freeing unused kernel image (initmem) memory: 3528K [ 1.234936] Write protecting the kernel read-only data: 26624k [ 1.236908] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.238751] Run /sbin/init as init process [ 1.239012] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.243595] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 INIT: version 3.14 booting Starting udev [ 1.288357] udevd[138]: starting version 3.2.14 [ 1.293732] udevd[139]: starting eudev-3.2.14 [ 1.360501] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.491077] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.544968] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.606618] EXT4-fs (vda): re-mounted 8fc65865-6a0b-489c-a3c0-2f2c6583f3ea. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-b88519519fc59298ba6905453cb34d19b26ab794 qemux86-64 /dev/ttyS0 qemux86-64 login: