[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 692141514 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 4192.120 MHz processor [ 0.000725] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000747] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000749] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000783] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002277] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.006905] ACPI: Early table checksum verification disabled [ 0.006910] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.006920] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006929] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006938] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006941] ACPI: FACS 0x000000007FFE0000 000040 [ 0.006943] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006945] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006947] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006948] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006949] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.006951] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.006952] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.006952] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.006953] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.006953] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.006954] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.007037] Zone ranges: [ 0.007038] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007040] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007041] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.007042] Movable zone start for each node [ 0.007043] Early memory node ranges [ 0.007043] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.007044] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.007045] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.007046] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.012204] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012560] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.511403] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.511781] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.512144] ACPI: PM-Timer IO Port: 0x608 [ 0.512159] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.512185] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.512188] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.512190] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.512192] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.512193] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.512194] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.512197] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.512197] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.512203] TSC deadline timer available [ 0.512212] CPU topo: Max. logical packages: 1 [ 0.512213] CPU topo: Max. logical dies: 1 [ 0.512214] CPU topo: Max. dies per package: 1 [ 0.512218] CPU topo: Max. threads per core: 1 [ 0.512219] CPU topo: Num. cores per package: 4 [ 0.512220] CPU topo: Num. threads per package: 4 [ 0.512220] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.512242] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.512270] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.512272] Booting paravirtualized kernel on KVM [ 0.512276] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.512289] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.520169] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.520204] Kernel command line: root=/dev/vda rw ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.520279] random: crng init done [ 0.580204] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.588787] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.588876] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.593162] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.593168] software IO TLB: area num 4. [ 0.593170] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.623075] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.623233] ftrace: allocating 54089 entries in 212 pages [ 0.637150] ftrace: allocated 212 pages with 4 groups [ 0.637671] Dynamic Preempt: full [ 0.640432] rcu: Preemptible hierarchical RCU implementation. [ 0.640433] rcu: RCU event tracing is enabled. [ 0.640434] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.640438] All grace periods are expedited (rcu_expedited). [ 0.640439] Trampoline variant of Tasks RCU enabled. [ 0.640440] Rude variant of Tasks RCU enabled. [ 0.640441] Tracing variant of Tasks RCU enabled. [ 0.640443] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.640445] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.640465] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.640467] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.640470] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.650370] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.650639] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.650738] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.654861] Console: colour VGA+ 80x25 [ 0.654899] printk: legacy console [ttyS0] enabled [ 0.761274] ACPI: Core revision 20240827 [ 0.762125] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.763691] APIC: Switch to symmetric I/O mode setup [ 0.764382] x2apic enabled [ 0.767183] APIC: Switched APIC routing to: physical x2apic [ 0.768885] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.769595] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns [ 0.771170] Calibrating delay loop (skipped) preset value.. 8384.24 BogoMIPS (lpj=4192120) [ 0.773294] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.774171] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.775181] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.776173] Spectre V2 : Mitigation: Retpolines [ 0.777171] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.778171] Speculative Store Bypass: Vulnerable [ 0.779189] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.780170] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.781170] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.782171] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.783170] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.807663] Freeing SMP alternatives memory: 56K [ 0.808176] pid_max: default: 32768 minimum: 301 [ 0.808876] LSM: initializing lsm=capability,landlock [ 0.809199] landlock: Up and running. [ 0.810337] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.811293] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.813281] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.814740] Performance Events: AMD PMU driver. [ 0.815176] ... version: 0 [ 0.815813] ... bit width: 48 [ 0.816173] ... generic registers: 4 [ 0.816802] ... value mask: 0000ffffffffffff [ 0.817173] ... max period: 00007fffffffffff [ 0.817999] ... fixed-purpose events: 0 [ 0.818174] ... event mask: 000000000000000f [ 0.819168] signal: max sigframe size: 1776 [ 0.819893] rcu: Hierarchical SRCU implementation. [ 0.820173] rcu: Max phase no-delay instances is 400. [ 0.821196] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.822459] smp: Bringing up secondary CPUs ... [ 0.824235] smpboot: x86: Booting SMP configuration: [ 0.825186] .... node #0, CPUs: #1 #2 #3 [ 0.865186] smp: Brought up 1 node, 4 CPUs [ 0.866781] smpboot: Total of 4 processors activated (33536.96 BogoMIPS) [ 0.867517] Memory: 5081576K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134060K reserved, 0K cma-reserved) [ 0.868506] devtmpfs: initialized [ 0.869557] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.870178] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.872343] pinctrl core: initialized pinctrl subsystem [ 0.875935] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.876407] thermal_sys: Registered thermal governor 'step_wise' [ 0.876409] thermal_sys: Registered thermal governor 'user_space' [ 0.877193] cpuidle: using governor menu [ 0.878687] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.879176] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.880197] PCI: Using configuration type 1 for base access [ 0.881206] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.939175] raid6: sse2x4 gen() 15716 MB/s [ 0.956175] raid6: sse2x2 gen() 4070 MB/s [ 0.973178] raid6: sse2x1 gen() 1560 MB/s [ 0.973874] raid6: using algorithm sse2x4 gen() 15716 MB/s [ 0.991175] raid6: .... xor() 2358 MB/s, rmw enabled [ 0.992155] raid6: using ssse3x2 recovery algorithm [ 0.992488] ACPI: Added _OSI(Module Device) [ 0.993174] ACPI: Added _OSI(Processor Device) [ 0.993872] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.994173] ACPI: Added _OSI(Processor Aggregator Device) [ 0.995886] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.997281] ACPI: Interpreter enabled [ 0.997835] ACPI: PM: (supports S0 S3 S5) [ 0.998174] ACPI: Using IOAPIC for interrupt routing [ 0.998915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.999172] PCI: Using E820 reservations for host bridge windows [ 1.000118] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.001573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.002180] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.003200] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.004198] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.005241] PCI host bridge to bus 0000:00 [ 1.005897] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.006174] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.007175] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.008174] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.009094] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.009174] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.010175] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.011006] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.011612] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.014008] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.015173] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.019174] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.022176] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.023545] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.025173] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.026824] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.031787] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.034022] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.036259] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.040092] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.042286] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.045814] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.047097] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.048452] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.051177] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.052825] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.058176] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.061880] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.064528] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.066155] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.068173] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.069787] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.073297] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.074861] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.075483] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.077954] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.078491] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.080142] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.083169] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.084173] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.086270] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.089173] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.090852] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.091220] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.092085] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.092219] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.093137] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.093230] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.094212] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.095233] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.096201] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.097174] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.098201] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.099027] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.099180] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.100184] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.100914] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.101177] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.102546] iommu: Default domain type: Translated [ 1.103122] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.103393] SCSI subsystem initialized [ 1.104218] ACPI: bus type USB registered [ 1.104794] usbcore: registered new interface driver usbfs [ 1.105180] usbcore: registered new interface driver hub [ 1.105840] usbcore: registered new device driver usb [ 1.106212] pps_core: LinuxPPS API ver. 1 registered [ 1.106865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.107178] PTP clock support registered [ 1.108591] Bluetooth: Core ver 2.22 [ 1.109189] NET: Registered PF_BLUETOOTH protocol family [ 1.110174] Bluetooth: HCI device and connection manager initialized [ 1.111103] Bluetooth: HCI socket layer initialized [ 1.111174] Bluetooth: L2CAP socket layer initialized [ 1.112183] Bluetooth: SCO socket layer initialized [ 1.113211] PCI: Using ACPI for IRQ routing [ 1.156705] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.157169] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.157169] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.157182] vgaarb: loaded [ 1.157887] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.158174] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.161303] clocksource: Switched to clocksource kvm-clock [ 1.166329] pnp: PnP ACPI init [ 1.166923] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.168052] pnp: PnP ACPI: found 5 devices [ 1.176601] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.178142] NET: Registered PF_INET protocol family [ 1.181580] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.184277] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.185436] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.186406] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.188202] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.192268] TCP: Hash tables configured (established 65536 bind 65536) [ 1.193336] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.194395] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.195552] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.197009] RPC: Registered named UNIX socket transport module. [ 1.197765] RPC: Registered udp transport module. [ 1.198438] RPC: Registered tcp transport module. [ 1.199243] RPC: Registered tcp-with-tls transport module. [ 1.199992] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.200844] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.201844] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.202670] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.203781] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.204986] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.205887] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.207172] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.208500] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.209698] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.211040] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.212513] PCI: CLS 0 bytes, default 64 [ 1.213136] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.214105] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.215328] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d4d0b6d3, max_idle_ns: 440795255641 ns [ 1.218445] Initialise system trusted keyrings [ 1.272871] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.274410] NFS: Registering the id_resolver key type [ 1.275261] Key type id_resolver registered [ 1.275910] Key type id_legacy registered [ 1.278619] Key type cifs.idmap registered [ 1.286885] xor: automatically using best checksumming function avx [ 1.287960] Key type asymmetric registered [ 1.288478] Asymmetric key parser 'x509' registered [ 1.289167] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.290257] io scheduler mq-deadline registered [ 1.290864] io scheduler kyber registered [ 1.291500] io scheduler bfq registered [ 1.292386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.296578] ACPI: button: Power Button [PWRF] [ 1.298235] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.300208] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.301884] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.308497] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.311317] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.314628] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.316248] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.320871] Linux agpgart interface v0.103 [ 1.321706] ACPI: bus type drm_connector registered [ 1.322950] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.323968] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.326800] Console: switching to colour dummy device 80x25 [ 1.327792] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.327793] [drm] features: -context_init [ 1.329988] [drm] number of scanouts: 1 [ 1.330560] [drm] number of cap sets: 0 [ 1.331638] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.341075] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.354738] Console: switching to colour frame buffer device 160x50 [ 1.370485] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.389062] brd: module loaded [ 1.393189] loop: module loaded [ 1.393831] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.396317] virtio_blk virtio3: [vda] 1040656 512-byte logical blocks (533 MB/508 MiB) [ 1.399836] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.401330] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.402363] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.406097] scsi host0: ahci [ 1.406992] scsi host1: ahci [ 1.408049] scsi host2: ahci [ 1.408973] scsi host3: ahci [ 1.409824] scsi host4: ahci [ 1.410629] scsi host5: ahci [ 1.411151] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.412728] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.414025] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.415198] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.416205] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.417461] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.420372] e100: Intel(R) PRO/100 Network Driver [ 1.421094] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.421894] e1000: Intel(R) PRO/1000 Network Driver [ 1.422504] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.423226] e1000e: Intel(R) PRO/1000 Network Driver [ 1.423913] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.424881] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.425657] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.428307] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.429562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.430939] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.438090] hub 1-0:1.0: USB hub found [ 1.438857] hub 1-0:1.0: 2 ports detected [ 1.439736] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.441065] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.442609] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.449625] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.450870] hub 2-0:1.0: USB hub found [ 1.451472] hub 2-0:1.0: 6 ports detected [ 1.472698] hub 1-0:1.0: USB hub found [ 1.473278] hub 1-0:1.0: 2 ports detected [ 1.474085] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.474806] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.475833] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.477143] hub 3-0:1.0: USB hub found [ 1.477651] hub 3-0:1.0: 2 ports detected [ 1.478807] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.479484] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.480579] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.481617] hub 4-0:1.0: USB hub found [ 1.482240] hub 4-0:1.0: 2 ports detected [ 1.482940] usbcore: registered new interface driver usb-storage [ 1.483777] usbcore: registered new interface driver usbserial_generic [ 1.484870] usbserial: USB Serial support registered for generic [ 1.485887] usbcore: registered new interface driver ftdi_sio [ 1.486795] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.487975] usbcore: registered new interface driver pl2303 [ 1.488896] usbserial: USB Serial support registered for pl2303 [ 1.489775] i8042: PNP: No PS/2 controller found. [ 1.490684] mousedev: PS/2 mouse device common for all mice [ 1.491642] rtc_cmos 00:03: RTC can wake from S4 [ 1.492690] rtc_cmos 00:03: registered as rtc0 [ 1.493342] rtc_cmos 00:03: setting system clock to 2025-06-24T08:41:12 UTC (1750754472) [ 1.494457] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.495988] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.496151] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.497087] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.498485] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.500124] sdhci: Secure Digital Host Controller Interface driver [ 1.500953] sdhci: Copyright(c) Pierre Ossman [ 1.501626] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.502488] usbcore: registered new interface driver usbhid [ 1.503185] usbhid: USB HID core driver [ 1.503721] u32 classifier [ 1.504066] input device check on [ 1.504516] Actions configured [ 1.505354] NET: Registered PF_INET6 protocol family [ 1.506621] Segment Routing with IPv6 [ 1.507097] In-situ OAM (IOAM) with IPv6 [ 1.507626] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.508617] NET: Registered PF_PACKET protocol family [ 1.509252] Bridge firewalling registered [ 1.509816] l2tp_core: L2TP core driver, V2.0 [ 1.510401] Key type dns_resolver registered [ 1.510975] NET: Registered PF_VSOCK protocol family [ 1.512484] IPI shorthand broadcast: enabled [ 1.528841] sched_clock: Marking stable (1412025899, 116522835)->(1655003138, -126454404) [ 1.530075] registered taskstats version 1 [ 1.530681] Loading compiled-in X.509 certificates [ 1.532737] Key type .fscrypt registered [ 1.533328] Key type fscrypt-provisioning registered [ 1.535050] Btrfs loaded, zoned=no, fsverity=no [ 1.536970] Key type encrypted registered [ 1.537968] printk: legacy console [netcon0] enabled [ 1.538803] netconsole: network logging started [ 1.686577] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.724383] ata4: SATA link down (SStatus 0 SControl 300) [ 1.725398] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.726591] ata2: SATA link down (SStatus 0 SControl 300) [ 1.727622] ata5: SATA link down (SStatus 0 SControl 300) [ 1.728479] ata6: SATA link down (SStatus 0 SControl 300) [ 1.729210] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.730127] ata3.00: applying bridge limits [ 1.730863] ata1: SATA link down (SStatus 0 SControl 300) [ 1.731768] ata3.00: configured for UDMA/100 [ 1.732903] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.763787] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.764901] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.788545] IP-Config: Complete: [ 1.789036] device=eth0, hwaddr=52:54:00:12:34:0e, ipaddr=192.168.7.14, mask=255.255.255.0, gw=192.168.7.13 [ 1.790771] host=192.168.7.14, domain=, nis-domain=(none) [ 1.791619] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.791621] nameserver0=8.8.8.8 [ 1.793773] clk: Disabling unused clocks [ 1.795299] md: Waiting for all devices to be available before autodetect [ 1.796215] md: If you don't use raid, use raid=noautodetect [ 1.796805] md: Autodetecting RAID arrays. [ 1.797189] md: autorun ... [ 1.797491] md: ... autorun DONE. [ 1.804442] EXT4-fs (vda): mounted filesystem 6a23229f-9b9e-4010-aacf-c014c2e6188d r/w with ordered data mode. Quota mode: disabled. [ 1.805973] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.806712] devtmpfs: mounted [ 1.809286] Freeing unused kernel image (initmem) memory: 3528K [ 1.809919] Write protecting the kernel read-only data: 26624k [ 1.810863] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.811543] Run /sbin/init as init process INIT: version 3.14 booting [ 1.831700] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.833217] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.852375] udevd[139]: starting version 3.2.14 [ 1.857575] udevd[140]: starting eudev-3.2.14 [ 1.962559] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.093029] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.145053] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.203270] EXT4-fs (vda): re-mounted 6a23229f-9b9e-4010-aacf-c014c2e6188d. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-a3885a9d12ef9b2ad189a21563ee6cec3daf60a9 qemux86-64 /dev/ttyS0 qemux86-64 login: