[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 529241449 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.000 MHz processor [ 0.000960] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000992] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000994] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001043] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002889] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003033] ACPI: Early table checksum verification disabled [ 0.003035] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003041] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003045] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003048] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003050] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003051] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003052] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003054] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003055] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003057] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003057] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003058] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003058] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003059] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003059] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003060] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.005038] Zone ranges: [ 0.005039] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005040] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005041] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005041] Movable zone start for each node [ 0.005042] Early memory node ranges [ 0.005042] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005043] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.005044] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005045] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.006361] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006382] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.085457] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.085507] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.085911] ACPI: PM-Timer IO Port: 0x608 [ 0.085923] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.085949] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.085951] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.085952] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.085953] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.085954] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.085955] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.085958] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.085958] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.085962] TSC deadline timer available [ 0.085966] CPU topo: Max. logical packages: 1 [ 0.085967] CPU topo: Max. logical dies: 1 [ 0.085967] CPU topo: Max. dies per package: 1 [ 0.085971] CPU topo: Max. threads per core: 1 [ 0.085971] CPU topo: Num. cores per package: 4 [ 0.085971] CPU topo: Num. threads per package: 4 [ 0.085972] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.085987] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.086005] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.086006] Booting paravirtualized kernel on KVM [ 0.086008] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.086013] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.087446] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.087470] Kernel command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.087522] random: crng init done [ 0.106452] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.108978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.109011] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.110028] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.110032] software IO TLB: area num 4. [ 0.110033] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.115033] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.115052] ftrace: allocating 54089 entries in 212 pages [ 0.125085] ftrace: allocated 212 pages with 4 groups [ 0.125113] Dynamic Preempt: full [ 0.126861] rcu: Preemptible hierarchical RCU implementation. [ 0.126862] rcu: RCU event tracing is enabled. [ 0.126862] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.126863] All grace periods are expedited (rcu_expedited). [ 0.126864] Trampoline variant of Tasks RCU enabled. [ 0.126864] Rude variant of Tasks RCU enabled. [ 0.126864] Tracing variant of Tasks RCU enabled. [ 0.126865] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.126865] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.126869] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.126871] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.126872] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.133710] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.133896] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.133968] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.139118] Console: colour VGA+ 80x25 [ 0.139158] printk: legacy console [ttyS0] enabled [ 0.261720] ACPI: Core revision 20240827 [ 0.262491] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.264025] APIC: Switch to symmetric I/O mode setup [ 0.264987] x2apic enabled [ 0.265720] APIC: Switched APIC routing to: physical x2apic [ 0.267660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.269335] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.270976] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.272109] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.272976] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.273978] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.274977] Spectre V2 : Mitigation: Retpolines [ 0.275976] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.276977] Speculative Store Bypass: Vulnerable [ 0.277989] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.278977] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.279976] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.280977] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.281976] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.302756] Freeing SMP alternatives memory: 56K [ 0.302979] pid_max: default: 32768 minimum: 301 [ 0.303992] LSM: initializing lsm=capability,landlock [ 0.305002] landlock: Up and running. [ 0.305608] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.305980] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.307159] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.308100] Performance Events: AMD PMU driver. [ 0.308837] ... version: 0 [ 0.308980] ... bit width: 48 [ 0.309639] ... generic registers: 4 [ 0.309978] ... value mask: 0000ffffffffffff [ 0.310810] ... max period: 00007fffffffffff [ 0.310978] ... fixed-purpose events: 0 [ 0.311628] ... event mask: 000000000000000f [ 0.312034] signal: max sigframe size: 1776 [ 0.312716] rcu: Hierarchical SRCU implementation. [ 0.312979] rcu: Max phase no-delay instances is 400. [ 0.313827] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.314104] smp: Bringing up secondary CPUs ... [ 0.314880] smpboot: x86: Booting SMP configuration: [ 0.314981] .... node #0, CPUs: #1 #2 #3 [ 0.353051] smp: Brought up 1 node, 4 CPUs [ 0.354646] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 0.355345] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 0.356048] devtmpfs: initialized [ 0.356670] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.356984] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.358108] pinctrl core: initialized pinctrl subsystem [ 0.359211] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.360057] thermal_sys: Registered thermal governor 'step_wise' [ 0.360058] thermal_sys: Registered thermal governor 'user_space' [ 0.360988] cpuidle: using governor menu [ 0.362117] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.362979] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.363985] PCI: Using configuration type 1 for base access [ 0.364895] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.381450] raid6: sse2x4 gen() 9448 MB/s [ 0.399346] raid6: sse2x2 gen() 10860 MB/s [ 0.417418] raid6: sse2x1 gen() 3558 MB/s [ 0.418986] raid6: using algorithm sse2x2 gen() 10860 MB/s [ 0.436984] raid6: .... xor() 5107 MB/s, rmw enabled [ 0.438984] raid6: using ssse3x2 recovery algorithm [ 0.441085] ACPI: Added _OSI(Module Device) [ 0.441984] ACPI: Added _OSI(Processor Device) [ 0.443984] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.444985] ACPI: Added _OSI(Processor Aggregator Device) [ 0.447863] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.453062] ACPI: Interpreter enabled [ 0.453737] ACPI: PM: (supports S0 S3 S5) [ 0.453980] ACPI: Using IOAPIC for interrupt routing [ 0.454823] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.454978] PCI: Using E820 reservations for host bridge windows [ 0.456028] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.457853] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.457983] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.459000] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.460006] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.461015] PCI host bridge to bus 0000:00 [ 0.461714] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.461979] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.462979] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.463978] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.464978] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.465978] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.466978] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.467935] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.468425] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.469979] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.471751] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.474979] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.476979] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.478501] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.480758] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.481863] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.484838] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.487511] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.488979] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.491456] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.492980] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.496450] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.497027] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.498492] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.499980] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.501519] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.504554] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.506560] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.509809] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.510744] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.512412] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.513672] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.515515] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.516753] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.517345] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.519651] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.520342] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.521559] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.524234] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.525483] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.526752] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.529798] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.530870] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.531026] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.532022] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.533028] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.534022] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.535019] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.536022] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.537020] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.537999] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.538983] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.539982] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.540981] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.541981] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.542982] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.543981] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.544981] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.546207] iommu: Default domain type: Translated [ 0.546979] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.548021] SCSI subsystem initialized [ 0.548682] ACPI: bus type USB registered [ 0.548989] usbcore: registered new interface driver usbfs [ 0.549985] usbcore: registered new interface driver hub [ 0.550944] usbcore: registered new device driver usb [ 0.550989] pps_core: LinuxPPS API ver. 1 registered [ 0.551840] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.551981] PTP clock support registered [ 0.553077] Bluetooth: Core ver 2.22 [ 0.553713] NET: Registered PF_BLUETOOTH protocol family [ 0.553980] Bluetooth: HCI device and connection manager initialized [ 0.554979] Bluetooth: HCI socket layer initialized [ 0.555848] Bluetooth: L2CAP socket layer initialized [ 0.555985] Bluetooth: SCO socket layer initialized [ 0.556849] PCI: Using ACPI for IRQ routing [ 0.605846] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.605975] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.605975] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.605980] vgaarb: loaded [ 0.606480] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.606978] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.611472] clocksource: Switched to clocksource kvm-clock [ 0.612205] pnp: PnP ACPI init [ 0.612816] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.614947] pnp: PnP ACPI: found 5 devices [ 0.622185] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.623780] NET: Registered PF_INET protocol family [ 0.624787] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.627131] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.628622] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.629965] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.631404] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.632941] TCP: Hash tables configured (established 65536 bind 65536) [ 0.634211] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.635463] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.636748] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.637893] RPC: Registered named UNIX socket transport module. [ 0.638934] RPC: Registered udp transport module. [ 0.639755] RPC: Registered tcp transport module. [ 0.640584] RPC: Registered tcp-with-tls transport module. [ 0.641533] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.642656] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.644693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.645772] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.646960] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.648147] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.649334] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.650732] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.652146] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.653422] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.654692] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.656090] PCI: CLS 0 bytes, default 64 [ 0.656823] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.657950] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.659354] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.661894] Initialise system trusted keyrings [ 0.662779] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.664053] NFS: Registering the id_resolver key type [ 0.664916] Key type id_resolver registered [ 0.665651] Key type id_legacy registered [ 0.666795] Key type cifs.idmap registered [ 0.674645] xor: automatically using best checksumming function avx [ 0.675887] Key type asymmetric registered [ 0.676607] Asymmetric key parser 'x509' registered [ 0.677466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.678752] io scheduler mq-deadline registered [ 0.679558] io scheduler kyber registered [ 0.680269] io scheduler bfq registered [ 0.681143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.683130] ACPI: button: Power Button [PWRF] [ 0.684298] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.686033] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.687748] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.691279] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.693067] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.694192] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.695610] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.697697] Linux agpgart interface v0.103 [ 0.698434] ACPI: bus type drm_connector registered [ 0.699329] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.700240] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.703989] Console: switching to colour dummy device 80x25 [ 0.705051] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.705052] [drm] features: -context_init [ 0.707223] [drm] number of scanouts: 1 [ 0.707864] [drm] number of cap sets: 0 [ 0.708658] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.710460] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.722982] Console: switching to colour frame buffer device 160x50 [ 0.735288] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.737952] brd: module loaded [ 0.739020] loop: module loaded [ 0.739623] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.742338] virtio_blk virtio3: [vda] 1040608 512-byte logical blocks (533 MB/508 MiB) [ 0.745233] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.746538] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.747546] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.749031] scsi host0: ahci [ 0.749655] scsi host1: ahci [ 0.750238] scsi host2: ahci [ 0.750827] scsi host3: ahci [ 0.751553] scsi host4: ahci [ 0.752142] scsi host5: ahci [ 0.752625] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.753996] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.755316] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.756604] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.757895] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.759195] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.761658] e100: Intel(R) PRO/100 Network Driver [ 0.762433] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.763310] e1000: Intel(R) PRO/1000 Network Driver [ 0.764093] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.764999] e1000e: Intel(R) PRO/1000 Network Driver [ 0.765789] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.766723] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.767584] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.769329] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.770304] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.771598] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.772801] hub 1-0:1.0: USB hub found [ 0.773416] hub 1-0:1.0: 2 ports detected [ 0.774213] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.775346] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.777146] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.784092] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.785117] hub 2-0:1.0: USB hub found [ 0.785716] hub 2-0:1.0: 6 ports detected [ 0.807156] hub 1-0:1.0: USB hub found [ 0.807782] hub 1-0:1.0: 2 ports detected [ 0.808548] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.810340] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.813005] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.815552] hub 3-0:1.0: USB hub found [ 0.817118] hub 3-0:1.0: 2 ports detected [ 0.819617] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.821371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.824162] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.826718] hub 4-0:1.0: USB hub found [ 0.828305] hub 4-0:1.0: 2 ports detected [ 0.829926] usbcore: registered new interface driver usb-storage [ 0.832315] usbcore: registered new interface driver usbserial_generic [ 0.834438] usbserial: USB Serial support registered for generic [ 0.836413] usbcore: registered new interface driver ftdi_sio [ 0.838293] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.840805] usbcore: registered new interface driver pl2303 [ 0.842600] usbserial: USB Serial support registered for pl2303 [ 0.844574] i8042: PNP: No PS/2 controller found. [ 0.846609] mousedev: PS/2 mouse device common for all mice [ 0.849051] rtc_cmos 00:03: RTC can wake from S4 [ 0.851573] rtc_cmos 00:03: registered as rtc0 [ 0.853107] rtc_cmos 00:03: setting system clock to 2025-06-24T14:42:41 UTC (1750776161) [ 0.855750] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.858540] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.858571] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.860282] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.862929] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.867638] sdhci: Secure Digital Host Controller Interface driver [ 0.869536] sdhci: Copyright(c) Pierre Ossman [ 0.870931] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.872778] usbcore: registered new interface driver usbhid [ 0.874506] usbhid: USB HID core driver [ 0.875740] u32 classifier [ 0.876589] input device check on [ 0.877754] Actions configured [ 0.878948] NET: Registered PF_INET6 protocol family [ 0.880864] Segment Routing with IPv6 [ 0.882036] In-situ OAM (IOAM) with IPv6 [ 0.883312] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.885324] NET: Registered PF_PACKET protocol family [ 0.886990] Bridge firewalling registered [ 0.888287] l2tp_core: L2TP core driver, V2.0 [ 0.889676] Key type dns_resolver registered [ 0.891239] NET: Registered PF_VSOCK protocol family [ 0.893241] IPI shorthand broadcast: enabled [ 0.896165] sched_clock: Marking stable (763006747, 133074000)->(970884117, -74803370) [ 0.898782] registered taskstats version 1 [ 0.900230] Loading compiled-in X.509 certificates [ 0.903242] Key type .fscrypt registered [ 0.904616] Key type fscrypt-provisioning registered [ 0.906811] Btrfs loaded, zoned=no, fsverity=no [ 0.909187] Key type encrypted registered [ 0.910781] printk: legacy console [netcon0] enabled [ 0.912799] netconsole: network logging started [ 1.030147] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.063819] ata1: SATA link down (SStatus 0 SControl 300) [ 1.065006] ata2: SATA link down (SStatus 0 SControl 300) [ 1.072543] ata6: SATA link down (SStatus 0 SControl 300) [ 1.073577] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.074721] ata4: SATA link down (SStatus 0 SControl 300) [ 1.075823] ata5: SATA link down (SStatus 0 SControl 300) [ 1.078123] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.079034] ata3.00: applying bridge limits [ 1.079776] ata3.00: configured for UDMA/100 [ 1.080862] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.109420] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.111853] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.139084] IP-Config: Complete: [ 1.139692] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 1.141356] host=192.168.7.18, domain=, nis-domain=(none) [ 1.142266] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.142267] nameserver0=8.8.8.8 [ 1.144115] clk: Disabling unused clocks [ 1.145007] md: Waiting for all devices to be available before autodetect [ 1.146072] md: If you don't use raid, use raid=noautodetect [ 1.146836] md: Autodetecting RAID arrays. [ 1.147421] md: autorun ... [ 1.147786] md: ... autorun DONE. [ 1.157461] EXT4-fs (vda): mounted filesystem fe7e8e0f-74ff-405f-8867-9a989205ffb9 r/w with ordered data mode. Quota mode: disabled. [ 1.162163] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.165219] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.165645] devtmpfs: mounted [ 1.166876] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.170112] Freeing unused kernel image (initmem) memory: 3528K [ 1.172401] Write protecting the kernel read-only data: 26624k [ 1.175455] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.177953] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.218277] udevd[137]: starting version 3.2.14 [ 1.224119] udevd[138]: starting eudev-3.2.14 [ 1.281125] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.411880] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.464484] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.525476] EXT4-fs (vda): re-mounted fe7e8e0f-74ff-405f-8867-9a989205ffb9. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-1e6adc02148bb50a78fd952f4db29496c2eb078b qemux86-64 /dev/ttyS0 qemux86-64 login: