[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 3463792188 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.998 MHz processor [ 0.000917] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000945] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000947] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000989] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002878] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.055006] ACPI: Early table checksum verification disabled [ 0.055013] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.055022] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055027] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055033] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055035] ACPI: FACS 0x000000007FFE0000 000040 [ 0.055037] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055038] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055040] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055041] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.055042] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.055043] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.055044] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.055045] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.055045] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.055046] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.055046] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.128345] Zone ranges: [ 0.128348] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.128351] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.128352] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.128353] Movable zone start for each node [ 0.128354] Early memory node ranges [ 0.128354] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.128356] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.128357] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.128358] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.170776] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.171148] On node 0, zone DMA: 97 pages in unavailable ranges [ 2.138611] On node 0, zone Normal: 40 pages in unavailable ranges [ 2.138939] On node 0, zone Normal: 5120 pages in unavailable ranges [ 2.139287] ACPI: PM-Timer IO Port: 0x608 [ 2.139299] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 2.139329] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 2.139332] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 2.139333] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 2.139334] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 2.139335] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 2.139336] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 2.139339] ACPI: Using ACPI (MADT) for SMP configuration information [ 2.139340] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 2.139344] TSC deadline timer available [ 2.139348] CPU topo: Max. logical packages: 1 [ 2.139349] CPU topo: Max. logical dies: 1 [ 2.139350] CPU topo: Max. dies per package: 1 [ 2.139353] CPU topo: Max. threads per core: 1 [ 2.139354] CPU topo: Num. cores per package: 4 [ 2.139354] CPU topo: Num. threads per package: 4 [ 2.139354] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 2.139371] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 2.139388] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 2.139389] Booting paravirtualized kernel on KVM [ 2.139391] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 2.139402] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 2.164188] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 2.164228] Kernel command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 2.164304] random: crng init done [ 2.312944] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 2.366038] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 2.366103] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 2.428956] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 2.428964] software IO TLB: area num 4. [ 2.428966] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 2.454457] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 2.454567] ftrace: allocating 54089 entries in 212 pages [ 2.466005] ftrace: allocated 212 pages with 4 groups [ 2.466237] Dynamic Preempt: full [ 2.484275] rcu: Preemptible hierarchical RCU implementation. [ 2.484279] rcu: RCU event tracing is enabled. [ 2.484280] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 2.484283] All grace periods are expedited (rcu_expedited). [ 2.484284] Trampoline variant of Tasks RCU enabled. [ 2.484284] Rude variant of Tasks RCU enabled. [ 2.484285] Tracing variant of Tasks RCU enabled. [ 2.484285] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.484287] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.484303] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.484306] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.484307] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.514114] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.514377] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 2.514477] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 2.520141] Console: colour VGA+ 80x25 [ 2.520175] printk: legacy console [ttyS0] enabled [ 2.658116] ACPI: Core revision 20240827 [ 2.659232] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 2.660846] APIC: Switch to symmetric I/O mode setup [ 2.661788] x2apic enabled [ 2.662509] APIC: Switched APIC routing to: physical x2apic [ 2.664353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 2.665314] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 2.666957] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 2.668083] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 2.668958] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 2.669960] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 2.670959] Spectre V2 : Mitigation: Retpolines [ 2.671957] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 2.672958] Speculative Store Bypass: Vulnerable [ 2.673969] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 2.674958] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 2.675958] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 2.676958] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 2.677958] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 2.698973] Freeing SMP alternatives memory: 56K [ 2.699764] pid_max: default: 32768 minimum: 301 [ 2.699976] LSM: initializing lsm=capability,landlock [ 2.700991] landlock: Up and running. [ 2.702152] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.704077] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.706023] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 2.707397] Performance Events: AMD PMU driver. [ 2.707962] ... version: 0 [ 2.708603] ... bit width: 48 [ 2.708959] ... generic registers: 4 [ 2.709587] ... value mask: 0000ffffffffffff [ 2.709959] ... max period: 00007fffffffffff [ 2.710804] ... fixed-purpose events: 0 [ 2.710959] ... event mask: 000000000000000f [ 2.712062] signal: max sigframe size: 1776 [ 2.712794] rcu: Hierarchical SRCU implementation. [ 2.712961] rcu: Max phase no-delay instances is 400. [ 2.713858] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.714241] smp: Bringing up secondary CPUs ... [ 2.715183] smpboot: x86: Booting SMP configuration: [ 2.715963] .... node #0, CPUs: #1 #2 #3 [ 2.751994] smp: Brought up 1 node, 4 CPUs [ 2.753628] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 2.754516] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 2.755504] devtmpfs: initialized [ 2.756207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.756964] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.758072] pinctrl core: initialized pinctrl subsystem [ 2.762314] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.763136] thermal_sys: Registered thermal governor 'step_wise' [ 2.763137] thermal_sys: Registered thermal governor 'user_space' [ 2.763980] cpuidle: using governor menu [ 2.765787] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 2.765963] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 2.766972] PCI: Using configuration type 1 for base access [ 2.767992] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.814969] raid6: sse2x4 gen() 25838 MB/s [ 2.831961] raid6: sse2x2 gen() 26012 MB/s [ 2.848962] raid6: sse2x1 gen() 9259 MB/s [ 2.849714] raid6: using algorithm sse2x2 gen() 26012 MB/s [ 2.866960] raid6: .... xor() 18217 MB/s, rmw enabled [ 2.867861] raid6: using ssse3x2 recovery algorithm [ 2.868366] ACPI: Added _OSI(Module Device) [ 2.868961] ACPI: Added _OSI(Processor Device) [ 2.869700] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.869960] ACPI: Added _OSI(Processor Aggregator Device) [ 2.871456] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 2.873028] ACPI: Interpreter enabled [ 2.873682] ACPI: PM: (supports S0 S3 S5) [ 2.873961] ACPI: Using IOAPIC for interrupt routing [ 2.874986] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.875960] PCI: Using E820 reservations for host bridge windows [ 2.876989] ACPI: Enabled 2 GPEs in block 00 to 3F [ 2.879764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.879966] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.881025] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 2.881992] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 2.883021] PCI host bridge to bus 0000:00 [ 2.883691] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.883961] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.884960] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.885960] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 2.886959] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 2.887960] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 2.888960] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.889885] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 2.891105] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.892962] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 2.894761] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 2.900965] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 2.902962] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 2.904557] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.905961] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 2.907961] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 2.911413] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 2.913525] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 2.916029] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 2.919763] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 2.922046] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 2.925489] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 2.926214] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.928091] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.930899] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 2.931961] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 2.936963] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 2.940278] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 2.942332] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 2.944112] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 2.946874] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 2.947713] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 2.950310] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 2.952060] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 2.953305] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 2.955543] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 2.956359] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 2.957208] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 2.960180] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 2.961498] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 2.963689] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 2.965363] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 2.967063] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 2.968026] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.969007] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 2.970006] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.971011] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 2.972004] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 2.973005] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 2.974004] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 2.974981] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 2.975963] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 2.976942] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 2.976963] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 2.977953] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 2.978963] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 2.979971] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 2.980964] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 2.982478] iommu: Default domain type: Translated [ 2.982960] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.984180] SCSI subsystem initialized [ 2.985008] ACPI: bus type USB registered [ 2.986001] usbcore: registered new interface driver usbfs [ 2.986923] usbcore: registered new interface driver hub [ 2.986965] usbcore: registered new device driver usb [ 2.987879] pps_core: LinuxPPS API ver. 1 registered [ 2.987960] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.988961] PTP clock support registered [ 2.991171] Bluetooth: Core ver 2.22 [ 2.991775] NET: Registered PF_BLUETOOTH protocol family [ 2.991960] Bluetooth: HCI device and connection manager initialized [ 2.992966] Bluetooth: HCI socket layer initialized [ 2.993736] Bluetooth: L2CAP socket layer initialized [ 2.993965] Bluetooth: SCO socket layer initialized [ 2.994993] PCI: Using ACPI for IRQ routing [ 3.042485] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 3.042956] pci 0000:00:03.0: vgaarb: bridge control possible [ 3.042956] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.042965] vgaarb: loaded [ 3.043592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 3.043959] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 3.048691] clocksource: Switched to clocksource kvm-clock [ 3.060024] pnp: PnP ACPI init [ 3.063596] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 3.064957] pnp: PnP ACPI: found 5 devices [ 3.076953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.078492] NET: Registered PF_INET protocol family [ 3.081544] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.084044] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.122481] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.129457] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.131511] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.150610] TCP: Hash tables configured (established 65536 bind 65536) [ 3.152023] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.157181] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.159923] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.162237] RPC: Registered named UNIX socket transport module. [ 3.163332] RPC: Registered udp transport module. [ 3.164215] RPC: Registered tcp transport module. [ 3.165063] RPC: Registered tcp-with-tls transport module. [ 3.166073] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.167295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.168489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.169586] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.170846] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 3.172088] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 3.173344] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 3.174924] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 3.176647] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 3.178071] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 3.179373] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 3.180764] PCI: CLS 0 bytes, default 64 [ 3.181531] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.182699] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 3.184189] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 3.213683] Initialise system trusted keyrings [ 3.214770] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 3.216370] NFS: Registering the id_resolver key type [ 3.217362] Key type id_resolver registered [ 3.218886] Key type id_legacy registered [ 3.227019] Key type cifs.idmap registered [ 3.247411] xor: automatically using best checksumming function avx [ 3.249026] Key type asymmetric registered [ 3.249988] Asymmetric key parser 'x509' registered [ 3.251202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.252809] io scheduler mq-deadline registered [ 3.255501] io scheduler kyber registered [ 3.256436] io scheduler bfq registered [ 3.257806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.262629] ACPI: button: Power Button [PWRF] [ 3.266195] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 3.268644] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 3.270834] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 3.278506] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 3.281018] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.282722] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.284796] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.441228] Linux agpgart interface v0.103 [ 3.443182] ACPI: bus type drm_connector registered [ 3.445460] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 3.449430] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 3.457035] Console: switching to colour dummy device 80x25 [ 3.460257] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.460260] [drm] features: -context_init [ 3.465932] [drm] number of scanouts: 1 [ 3.467605] [drm] number of cap sets: 0 [ 3.470059] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 3.537739] fbcon: virtio_gpudrmfb (fb0) is primary device [ 3.563544] Console: switching to colour frame buffer device 160x50 [ 3.580016] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.660204] brd: module loaded [ 3.681020] loop: module loaded [ 3.682737] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 3.688799] virtio_blk virtio3: [vda] 1040592 512-byte logical blocks (533 MB/508 MiB) [ 3.697940] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 3.701381] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 3.703992] ahci 0000:00:1f.2: flags: 64bit ncq only [ 3.709871] scsi host0: ahci [ 3.712608] scsi host1: ahci [ 3.714492] scsi host2: ahci [ 3.716267] scsi host3: ahci [ 3.717935] scsi host4: ahci [ 3.759168] scsi host5: ahci [ 3.765563] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 3.768429] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 3.771223] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 3.773983] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 3.780140] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 3.782823] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 3.788748] e100: Intel(R) PRO/100 Network Driver [ 3.789858] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.791026] e1000: Intel(R) PRO/1000 Network Driver [ 3.791998] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.793421] e1000e: Intel(R) PRO/1000 Network Driver [ 3.794429] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.795600] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.796833] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.799192] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.800884] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.802230] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 3.825241] hub 1-0:1.0: USB hub found [ 3.826032] hub 1-0:1.0: 2 ports detected [ 3.831849] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.835879] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.840400] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 3.849677] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.853463] hub 2-0:1.0: USB hub found [ 3.855558] hub 2-0:1.0: 6 ports detected [ 3.878836] hub 1-0:1.0: USB hub found [ 3.881269] hub 1-0:1.0: 2 ports detected [ 3.883921] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.885939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.889536] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 3.892983] hub 3-0:1.0: USB hub found [ 3.894682] hub 3-0:1.0: 2 ports detected [ 3.897504] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.900012] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.903393] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 3.906187] hub 4-0:1.0: USB hub found [ 3.907874] hub 4-0:1.0: 2 ports detected [ 3.910208] usbcore: registered new interface driver usb-storage [ 3.913078] usbcore: registered new interface driver usbserial_generic [ 3.915923] usbserial: USB Serial support registered for generic [ 3.918513] usbcore: registered new interface driver ftdi_sio [ 3.921164] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.924377] usbcore: registered new interface driver pl2303 [ 3.926870] usbserial: USB Serial support registered for pl2303 [ 3.929433] i8042: PNP: No PS/2 controller found. [ 3.932268] mousedev: PS/2 mouse device common for all mice [ 3.934961] rtc_cmos 00:03: RTC can wake from S4 [ 3.938811] rtc_cmos 00:03: registered as rtc0 [ 3.940880] rtc_cmos 00:03: setting system clock to 2025-06-25T18:26:33 UTC (1750875993) [ 3.944606] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 3.949490] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.949933] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 3.952268] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 3.956542] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 3.963643] sdhci: Secure Digital Host Controller Interface driver [ 3.974142] sdhci: Copyright(c) Pierre Ossman [ 3.976070] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.979173] usbcore: registered new interface driver usbhid [ 3.981568] usbhid: USB HID core driver [ 3.983408] u32 classifier [ 3.984713] input device check on [ 3.986241] Actions configured [ 3.988354] NET: Registered PF_INET6 protocol family [ 3.991569] Segment Routing with IPv6 [ 3.993208] In-situ OAM (IOAM) with IPv6 [ 3.994930] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.997741] NET: Registered PF_PACKET protocol family [ 3.999914] Bridge firewalling registered [ 4.002053] l2tp_core: L2TP core driver, V2.0 [ 4.003953] Key type dns_resolver registered [ 4.005877] NET: Registered PF_VSOCK protocol family [ 4.008766] IPI shorthand broadcast: enabled [ 4.014541] sched_clock: Marking stable (3865006655, 148572285)->(4225721856, -212142916) [ 4.018434] registered taskstats version 1 [ 4.020389] Loading compiled-in X.509 certificates [ 4.025691] Key type .fscrypt registered [ 4.027444] Key type fscrypt-provisioning registered [ 4.046611] Btrfs loaded, zoned=no, fsverity=no [ 4.048616] Key type encrypted registered [ 4.049674] printk: legacy console [netcon0] enabled [ 4.050898] netconsole: network logging started [ 4.092544] ata2: SATA link down (SStatus 0 SControl 300) [ 4.093828] ata4: SATA link down (SStatus 0 SControl 300) [ 4.096315] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.099646] ata5: SATA link down (SStatus 0 SControl 300) [ 4.101025] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.102369] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 4.103455] ata3.00: applying bridge limits [ 4.104413] ata1: SATA link down (SStatus 0 SControl 300) [ 4.105815] ata6: SATA link down (SStatus 0 SControl 300) [ 4.107150] ata3.00: configured for UDMA/100 [ 4.116228] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 4.137906] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 4.139460] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.158614] IP-Config: Complete: [ 4.159438] device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19 [ 4.161811] host=192.168.7.20, domain=, nis-domain=(none) [ 4.163116] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.163118] nameserver0=8.8.8.8 [ 4.165637] clk: Disabling unused clocks [ 4.213518] md: Waiting for all devices to be available before autodetect [ 4.215131] md: If you don't use raid, use raid=noautodetect [ 4.216183] md: Autodetecting RAID arrays. [ 4.216926] md: autorun ... [ 4.217421] md: ... autorun DONE. [ 4.229501] EXT4-fs (vda): mounted filesystem 2abb6aac-a25d-48e9-94c9-07a0e3e9f528 r/w with ordered data mode. Quota mode: disabled. [ 4.231506] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.232558] devtmpfs: mounted [ 4.233473] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 4.235550] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 4.237260] Freeing unused kernel image (initmem) memory: 3528K [ 4.238348] Write protecting the kernel read-only data: 26624k [ 4.239488] Freeing unused kernel image (rodata/data gap) memory: 284K [ 4.240431] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 4.353655] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 4.466034] udevd[140]: starting version 3.2.14 [ 4.476437] udevd[141]: starting eudev-3.2.14 [ 4.502283] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 4.559618] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 4.825623] EXT4-fs (vda): re-mounted 2abb6aac-a25d-48e9-94c9-07a0e3e9f528. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-ab45a7d8acd36e19bc812dda8681e404faf808fb qemux86-64 /dev/ttyS0 qemux86-64 login: