[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 5228697742 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2750.000 MHz processor [ 0.000931] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000963] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000966] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001023] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002970] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003116] ACPI: Early table checksum verification disabled [ 0.003119] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003125] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003130] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003134] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003136] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003137] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003139] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003140] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003142] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003143] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003144] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003144] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003145] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003145] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003146] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003146] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.137595] Zone ranges: [ 0.137599] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.137602] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.137604] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.137605] Movable zone start for each node [ 0.137606] Early memory node ranges [ 0.137606] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.137607] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.137608] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.137609] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.270859] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.270884] On node 0, zone DMA: 97 pages in unavailable ranges [ 2.052714] On node 0, zone Normal: 40 pages in unavailable ranges [ 2.052765] On node 0, zone Normal: 5120 pages in unavailable ranges [ 2.053141] ACPI: PM-Timer IO Port: 0x608 [ 2.053153] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 2.053185] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 2.053188] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 2.053190] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 2.053191] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 2.053192] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 2.053192] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 2.053195] ACPI: Using ACPI (MADT) for SMP configuration information [ 2.053196] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 2.053200] TSC deadline timer available [ 2.053204] CPU topo: Max. logical packages: 1 [ 2.053205] CPU topo: Max. logical dies: 1 [ 2.053206] CPU topo: Max. dies per package: 1 [ 2.053209] CPU topo: Max. threads per core: 1 [ 2.053209] CPU topo: Num. cores per package: 4 [ 2.053210] CPU topo: Num. threads per package: 4 [ 2.053210] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 2.053227] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 2.053244] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 2.053246] Booting paravirtualized kernel on KVM [ 2.053248] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 2.053254] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 2.053568] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 2.053595] Kernel command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 2.053663] random: crng init done [ 2.126894] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 2.149177] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 2.149220] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 2.172056] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 2.172065] software IO TLB: area num 4. [ 2.172066] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 2.179515] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 2.179537] ftrace: allocating 54089 entries in 212 pages [ 2.189630] ftrace: allocated 212 pages with 4 groups [ 2.189673] Dynamic Preempt: full [ 2.194489] rcu: Preemptible hierarchical RCU implementation. [ 2.194491] rcu: RCU event tracing is enabled. [ 2.194491] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 2.194493] All grace periods are expedited (rcu_expedited). [ 2.194493] Trampoline variant of Tasks RCU enabled. [ 2.194493] Rude variant of Tasks RCU enabled. [ 2.194494] Tracing variant of Tasks RCU enabled. [ 2.194494] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.194495] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.194500] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.194502] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.194503] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.199302] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.199494] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 2.199568] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 2.205661] Console: colour VGA+ 80x25 [ 2.205791] printk: legacy console [ttyS0] enabled [ 2.363024] ACPI: Core revision 20240827 [ 2.364067] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 2.366203] APIC: Switch to symmetric I/O mode setup [ 2.367602] x2apic enabled [ 2.368512] APIC: Switched APIC routing to: physical x2apic [ 2.371009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 2.372474] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 2.374894] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 2.376064] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 2.376896] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 2.377900] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 2.378898] Spectre V2 : Mitigation: Retpolines [ 2.379896] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 2.380896] Speculative Store Bypass: Vulnerable [ 2.381914] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 2.382896] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 2.383897] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 2.384897] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 2.385896] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 2.407723] Freeing SMP alternatives memory: 56K [ 2.407899] pid_max: default: 32768 minimum: 301 [ 2.408914] LSM: initializing lsm=capability,landlock [ 2.409938] landlock: Up and running. [ 2.410931] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.411899] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.413179] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 2.414082] Performance Events: AMD PMU driver. [ 2.414900] ... version: 0 [ 2.415645] ... bit width: 48 [ 2.415897] ... generic registers: 4 [ 2.416594] ... value mask: 0000ffffffffffff [ 2.416898] ... max period: 00007fffffffffff [ 2.417869] ... fixed-purpose events: 0 [ 2.417898] ... event mask: 000000000000000f [ 2.418995] signal: max sigframe size: 1776 [ 2.419941] rcu: Hierarchical SRCU implementation. [ 2.420899] rcu: Max phase no-delay instances is 400. [ 2.421946] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.423043] smp: Bringing up secondary CPUs ... [ 2.423902] smpboot: x86: Booting SMP configuration: [ 2.424757] .... node #0, CPUs: #1 #2 #3 [ 2.458921] smp: Brought up 1 node, 4 CPUs [ 2.460790] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 2.461188] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 2.461999] devtmpfs: initialized [ 2.462912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.463899] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.465032] pinctrl core: initialized pinctrl subsystem [ 2.466153] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.466999] thermal_sys: Registered thermal governor 'step_wise' [ 2.467000] thermal_sys: Registered thermal governor 'user_space' [ 2.467909] cpuidle: using governor menu [ 2.469732] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 2.469900] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 2.470906] PCI: Using configuration type 1 for base access [ 2.471951] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.497901] raid6: sse2x4 gen() 14216 MB/s [ 2.515899] raid6: sse2x2 gen() 12936 MB/s [ 2.533899] raid6: sse2x1 gen() 8088 MB/s [ 2.534704] raid6: using algorithm sse2x4 gen() 14216 MB/s [ 2.551898] raid6: .... xor() 2478 MB/s, rmw enabled [ 2.552785] raid6: using ssse3x2 recovery algorithm [ 2.552976] ACPI: Added _OSI(Module Device) [ 2.553676] ACPI: Added _OSI(Processor Device) [ 2.553897] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.554690] ACPI: Added _OSI(Processor Aggregator Device) [ 2.555304] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 2.556967] ACPI: Interpreter enabled [ 2.557679] ACPI: PM: (supports S0 S3 S5) [ 2.557899] ACPI: Using IOAPIC for interrupt routing [ 2.558766] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.558896] PCI: Using E820 reservations for host bridge windows [ 2.559950] ACPI: Enabled 2 GPEs in block 00 to 3F [ 2.561743] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.561901] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.562922] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 2.563923] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 2.564945] PCI host bridge to bus 0000:00 [ 2.565648] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.565898] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.566896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.567896] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 2.568896] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 2.569896] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 2.570897] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.571920] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 2.573363] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.575677] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 2.576898] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 2.580899] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 2.583898] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 2.585454] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.586897] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 2.588407] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 2.593749] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 2.595477] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 2.597467] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 2.599926] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 2.601926] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 2.604926] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 2.606020] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.607620] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.609570] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 2.610901] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 2.615754] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 2.617521] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 2.619354] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 2.620617] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 2.622447] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 2.623668] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 2.625157] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 2.627140] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 2.628508] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 2.631501] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 2.632415] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 2.633156] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 2.636658] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 2.637443] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 2.638854] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 2.640504] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 2.641879] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 2.641953] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.642944] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 2.643940] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.644940] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 2.645941] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 2.646938] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 2.647942] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 2.648916] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 2.649900] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 2.650902] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 2.651902] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 2.652900] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 2.653901] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 2.654900] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 2.655902] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 2.657199] iommu: Default domain type: Translated [ 2.657897] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.659027] SCSI subsystem initialized [ 2.659688] ACPI: bus type USB registered [ 2.659922] usbcore: registered new interface driver usbfs [ 2.660860] usbcore: registered new interface driver hub [ 2.660901] usbcore: registered new device driver usb [ 2.661866] pps_core: LinuxPPS API ver. 1 registered [ 2.661897] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.662900] PTP clock support registered [ 2.663582] Bluetooth: Core ver 2.22 [ 2.663905] NET: Registered PF_BLUETOOTH protocol family [ 2.664803] Bluetooth: HCI device and connection manager initialized [ 2.664900] Bluetooth: HCI socket layer initialized [ 2.665899] Bluetooth: L2CAP socket layer initialized [ 2.666787] Bluetooth: SCO socket layer initialized [ 2.666999] PCI: Using ACPI for IRQ routing [ 2.716601] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 2.716893] pci 0000:00:03.0: vgaarb: bridge control possible [ 2.716893] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.716906] vgaarb: loaded [ 2.717573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.717898] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 2.722973] clocksource: Switched to clocksource kvm-clock [ 2.724185] pnp: PnP ACPI init [ 2.724841] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 2.726260] pnp: PnP ACPI: found 5 devices [ 2.734838] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.736451] NET: Registered PF_INET protocol family [ 2.737373] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.739767] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.741278] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.742604] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.744132] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 2.745611] TCP: Hash tables configured (established 65536 bind 65536) [ 2.746771] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.747960] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.749241] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.750516] RPC: Registered named UNIX socket transport module. [ 2.752144] RPC: Registered udp transport module. [ 2.752954] RPC: Registered tcp transport module. [ 2.753736] RPC: Registered tcp-with-tls transport module. [ 2.754678] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.755781] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.756833] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.757903] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.759094] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 2.760337] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 2.761497] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 2.762892] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 2.764240] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 2.765536] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 2.766793] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 2.768195] PCI: CLS 0 bytes, default 64 [ 2.768912] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.770017] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 2.771364] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 2.773932] Initialise system trusted keyrings [ 2.774805] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.776099] NFS: Registering the id_resolver key type [ 2.776957] Key type id_resolver registered [ 2.777650] Key type id_legacy registered [ 2.778737] Key type cifs.idmap registered [ 2.786615] xor: automatically using best checksumming function avx [ 2.787839] Key type asymmetric registered [ 2.788547] Asymmetric key parser 'x509' registered [ 2.789385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.790657] io scheduler mq-deadline registered [ 2.791435] io scheduler kyber registered [ 2.792125] io scheduler bfq registered [ 2.793019] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.797428] ACPI: button: Power Button [PWRF] [ 2.798798] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 2.800653] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 2.802362] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 2.808650] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 2.810528] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.812824] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.814247] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.816472] Linux agpgart interface v0.103 [ 2.817273] ACPI: bus type drm_connector registered [ 2.818212] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 2.819172] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 2.822124] Console: switching to colour dummy device 80x25 [ 2.823230] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.823232] [drm] features: -context_init [ 2.825515] [drm] number of scanouts: 1 [ 2.826189] [drm] number of cap sets: 0 [ 2.827112] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.829183] fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.851424] Console: switching to colour frame buffer device 160x50 [ 2.872383] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.877513] brd: module loaded [ 2.878673] loop: module loaded [ 2.879349] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.881257] virtio_blk virtio3: [vda] 1040584 512-byte logical blocks (533 MB/508 MiB) [ 2.884357] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.885785] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.886934] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.889541] scsi host0: ahci [ 2.890240] scsi host1: ahci [ 2.890916] scsi host2: ahci [ 2.891562] scsi host3: ahci [ 2.892224] scsi host4: ahci [ 2.892873] scsi host5: ahci [ 2.893404] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.894838] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.896272] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.897677] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.899132] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.900554] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.903184] e100: Intel(R) PRO/100 Network Driver [ 2.904041] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.904998] e1000: Intel(R) PRO/1000 Network Driver [ 2.905865] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.906860] e1000e: Intel(R) PRO/1000 Network Driver [ 2.907711] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.908737] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.909652] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.911564] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.913113] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.914484] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.915837] hub 1-0:1.0: USB hub found [ 2.916524] hub 1-0:1.0: 2 ports detected [ 2.917897] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.919228] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.921192] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.929450] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.931138] hub 2-0:1.0: USB hub found [ 2.932090] hub 2-0:1.0: 6 ports detected [ 2.953592] hub 1-0:1.0: USB hub found [ 2.954619] hub 1-0:1.0: 2 ports detected [ 2.955702] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.956794] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.958386] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.959700] hub 3-0:1.0: USB hub found [ 2.960445] hub 3-0:1.0: 2 ports detected [ 2.961844] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.963047] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.964668] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.966209] hub 4-0:1.0: USB hub found [ 2.966977] hub 4-0:1.0: 2 ports detected [ 2.967868] usbcore: registered new interface driver usb-storage [ 2.969199] usbcore: registered new interface driver usbserial_generic [ 2.970566] usbserial: USB Serial support registered for generic [ 2.971818] usbcore: registered new interface driver ftdi_sio [ 2.973091] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.974549] usbcore: registered new interface driver pl2303 [ 2.975679] usbserial: USB Serial support registered for pl2303 [ 2.976849] i8042: PNP: No PS/2 controller found. [ 2.978128] mousedev: PS/2 mouse device common for all mice [ 2.979455] rtc_cmos 00:03: RTC can wake from S4 [ 2.980851] rtc_cmos 00:03: registered as rtc0 [ 2.983620] rtc_cmos 00:03: setting system clock to 2025-06-25T18:51:17 UTC (1750877477) [ 2.985818] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.988035] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.988171] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.989182] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.991641] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.994867] sdhci: Secure Digital Host Controller Interface driver [ 2.996648] sdhci: Copyright(c) Pierre Ossman [ 2.997845] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.999535] usbcore: registered new interface driver usbhid [ 3.001046] usbhid: USB HID core driver [ 3.002078] u32 classifier [ 3.002798] input device check on [ 3.003753] Actions configured [ 3.004738] NET: Registered PF_INET6 protocol family [ 3.006522] Segment Routing with IPv6 [ 3.007536] In-situ OAM (IOAM) with IPv6 [ 3.008631] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.010317] NET: Registered PF_PACKET protocol family [ 3.011730] Bridge firewalling registered [ 3.012889] l2tp_core: L2TP core driver, V2.0 [ 3.014070] Key type dns_resolver registered [ 3.015425] NET: Registered PF_VSOCK protocol family [ 3.017241] IPI shorthand broadcast: enabled [ 3.019946] sched_clock: Marking stable (2849007160, 170394090)->(3115715890, -96314640) [ 3.022141] registered taskstats version 1 [ 3.023339] Loading compiled-in X.509 certificates [ 3.025644] Key type .fscrypt registered [ 3.026611] Key type fscrypt-provisioning registered [ 3.028381] Btrfs loaded, zoned=no, fsverity=no [ 3.030426] Key type encrypted registered [ 3.031667] printk: legacy console [netcon0] enabled [ 3.033189] netconsole: network logging started [ 3.169443] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.207325] ata1: SATA link down (SStatus 0 SControl 300) [ 3.208518] ata4: SATA link down (SStatus 0 SControl 300) [ 3.209619] ata6: SATA link down (SStatus 0 SControl 300) [ 3.210952] ata2: SATA link down (SStatus 0 SControl 300) [ 3.212072] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.213738] ata5: SATA link down (SStatus 0 SControl 300) [ 3.215182] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.216532] ata3.00: applying bridge limits [ 3.217642] ata3.00: configured for UDMA/100 [ 3.219005] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.245468] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.247017] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.268442] IP-Config: Complete: [ 3.269293] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 3.271513] host=192.168.7.18, domain=, nis-domain=(none) [ 3.272833] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.272835] nameserver0=8.8.8.8 [ 3.275323] clk: Disabling unused clocks [ 3.276615] md: Waiting for all devices to be available before autodetect [ 3.277864] md: If you don't use raid, use raid=noautodetect [ 3.278942] md: Autodetecting RAID arrays. [ 3.279707] md: autorun ... [ 3.280242] md: ... autorun DONE. [ 3.286727] EXT4-fs (vda): mounted filesystem 0324f257-0663-42b3-8a16-952c05079ad8 r/w with ordered data mode. Quota mode: disabled. [ 3.289018] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.290231] devtmpfs: mounted [ 3.291612] Freeing unused kernel image (initmem) memory: 3528K [ 3.292736] Write protecting the kernel read-only data: 26624k [ 3.294223] Freeing unused kernel image (rodata/data gap) memory: 284K [ 3.295495] Run /sbin/init as init process INIT: version 3.14 booting [ 3.303018] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 3.305502] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 3.326725] udevd[138]: starting version 3.2.14 [ 3.331509] udevd[139]: starting eudev-3.2.14 [ 3.419431] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.550977] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 3.603832] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 3.662618] EXT4-fs (vda): re-mounted 0324f257-0663-42b3-8a16-952c05079ad8. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-39919c003ad8364d5b715773e52ffbbcd6e45922 qemux86-64 /dev/ttyS0 qemux86-64 login: