[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 788397249 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.998 MHz processor [ 0.001141] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001169] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001171] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001213] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003061] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003249] ACPI: Early table checksum verification disabled [ 0.003252] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003260] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003265] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003270] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003272] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003273] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003275] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003276] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003278] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003279] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003280] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003280] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003281] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003282] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003282] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003282] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.131780] Zone ranges: [ 0.131783] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.131786] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.131788] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.131789] Movable zone start for each node [ 0.131789] Early memory node ranges [ 0.131790] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.131791] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.131792] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.131793] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.159337] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.159683] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.559584] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.559944] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.560282] ACPI: PM-Timer IO Port: 0x608 [ 0.560293] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.560322] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.560324] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.560326] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.560327] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.560328] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.560329] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.560331] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.560332] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.560336] TSC deadline timer available [ 0.560341] CPU topo: Max. logical packages: 1 [ 0.560341] CPU topo: Max. logical dies: 1 [ 0.560342] CPU topo: Max. dies per package: 1 [ 0.560345] CPU topo: Max. threads per core: 1 [ 0.560346] CPU topo: Num. cores per package: 4 [ 0.560346] CPU topo: Num. threads per package: 4 [ 0.560347] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.560362] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.560379] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.560381] Booting paravirtualized kernel on KVM [ 0.560383] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.560388] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.567730] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.567759] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.567820] random: crng init done [ 0.585329] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.675045] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.675087] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.683045] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.683051] software IO TLB: area num 4. [ 0.683052] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.802716] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.802829] ftrace: allocating 54089 entries in 212 pages [ 0.814852] ftrace: allocated 212 pages with 4 groups [ 0.815665] Dynamic Preempt: full [ 0.817797] rcu: Preemptible hierarchical RCU implementation. [ 0.817798] rcu: RCU event tracing is enabled. [ 0.817799] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.817801] All grace periods are expedited (rcu_expedited). [ 0.817801] Trampoline variant of Tasks RCU enabled. [ 0.817802] Rude variant of Tasks RCU enabled. [ 0.817802] Tracing variant of Tasks RCU enabled. [ 0.817803] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.817804] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.817816] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.817818] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.817819] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.825062] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.825287] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.825370] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.829481] Console: colour VGA+ 80x25 [ 0.829515] printk: legacy console [ttyS0] enabled [ 0.961247] ACPI: Core revision 20240827 [ 0.962100] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.963577] APIC: Switch to symmetric I/O mode setup [ 0.964474] x2apic enabled [ 0.965166] APIC: Switched APIC routing to: physical x2apic [ 0.966934] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.967916] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.969534] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.970743] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.971534] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.972536] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.973536] Spectre V2 : Mitigation: Retpolines [ 0.974534] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.975534] Speculative Store Bypass: Vulnerable [ 0.976546] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.977534] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.978534] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.979534] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.980534] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.999520] Freeing SMP alternatives memory: 56K [ 0.999537] pid_max: default: 32768 minimum: 301 [ 1.000276] LSM: initializing lsm=capability,landlock [ 1.000563] landlock: Up and running. [ 1.001814] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.002669] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.004065] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.004964] Performance Events: AMD PMU driver. [ 1.005539] ... version: 0 [ 1.006180] ... bit width: 48 [ 1.006536] ... generic registers: 4 [ 1.007185] ... value mask: 0000ffffffffffff [ 1.007536] ... max period: 00007fffffffffff [ 1.008368] ... fixed-purpose events: 0 [ 1.008536] ... event mask: 000000000000000f [ 1.009456] signal: max sigframe size: 1776 [ 1.009577] rcu: Hierarchical SRCU implementation. [ 1.010332] rcu: Max phase no-delay instances is 400. [ 1.010607] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.011811] smp: Bringing up secondary CPUs ... [ 1.015584] smpboot: x86: Booting SMP configuration: [ 1.016413] .... node #0, CPUs: #1 #2 #3 [ 1.054584] smp: Brought up 1 node, 4 CPUs [ 1.056212] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 1.056885] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 1.057673] devtmpfs: initialized [ 1.058685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.059539] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.061619] pinctrl core: initialized pinctrl subsystem [ 1.064923] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.065679] thermal_sys: Registered thermal governor 'step_wise' [ 1.065680] thermal_sys: Registered thermal governor 'user_space' [ 1.066546] cpuidle: using governor menu [ 1.068604] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.069538] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.070542] PCI: Using configuration type 1 for base access [ 1.071455] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.093536] raid6: sse2x4 gen() 25639 MB/s [ 1.110536] raid6: sse2x2 gen() 24563 MB/s [ 1.128536] raid6: sse2x1 gen() 9005 MB/s [ 1.129215] raid6: using algorithm sse2x4 gen() 25639 MB/s [ 1.146536] raid6: .... xor() 3064 MB/s, rmw enabled [ 1.147335] raid6: using ssse3x2 recovery algorithm [ 1.147905] ACPI: Added _OSI(Module Device) [ 1.148536] ACPI: Added _OSI(Processor Device) [ 1.149270] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.149536] ACPI: Added _OSI(Processor Aggregator Device) [ 1.151005] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.152601] ACPI: Interpreter enabled [ 1.153256] ACPI: PM: (supports S0 S3 S5) [ 1.153538] ACPI: Using IOAPIC for interrupt routing [ 1.154378] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.154537] PCI: Using E820 reservations for host bridge windows [ 1.155580] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.157651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.158541] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.159560] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.160564] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.162082] PCI host bridge to bus 0000:00 [ 1.162538] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.163536] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.164537] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.165536] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.166536] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.167537] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.168536] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.169473] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.170254] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.172297] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.174524] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.178537] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.180537] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.182063] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.185537] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.187537] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.191077] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.194101] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.196152] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.199312] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.201052] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.205327] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.205708] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.207374] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.208546] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.210538] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.214538] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.218254] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.220995] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.222541] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.225165] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.226197] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.227977] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.229357] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.229845] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.233448] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.233888] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.234993] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.238537] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.239843] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.241898] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.244540] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.247487] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.247618] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.248591] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.249612] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.250583] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.251580] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.252588] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.253580] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.254562] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.255541] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.256899] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.257542] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.258544] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.259528] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.259544] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.260522] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.261253] iommu: Default domain type: Translated [ 1.261537] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.262767] SCSI subsystem initialized [ 1.263689] ACPI: bus type USB registered [ 1.264580] usbcore: registered new interface driver usbfs [ 1.265457] usbcore: registered new interface driver hub [ 1.266099] usbcore: registered new device driver usb [ 1.266576] pps_core: LinuxPPS API ver. 1 registered [ 1.267427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.267540] PTP clock support registered [ 1.269039] Bluetooth: Core ver 2.22 [ 1.269553] NET: Registered PF_BLUETOOTH protocol family [ 1.270420] Bluetooth: HCI device and connection manager initialized [ 1.270542] Bluetooth: HCI socket layer initialized [ 1.271340] Bluetooth: L2CAP socket layer initialized [ 1.271546] Bluetooth: SCO socket layer initialized [ 1.272566] PCI: Using ACPI for IRQ routing [ 1.322695] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.323533] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.323533] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.323541] vgaarb: loaded [ 1.324170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.324536] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.329107] clocksource: Switched to clocksource kvm-clock [ 1.337380] pnp: PnP ACPI init [ 1.341642] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.347002] pnp: PnP ACPI: found 5 devices [ 1.435618] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.437192] NET: Registered PF_INET protocol family [ 1.444906] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.447486] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.449215] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.450513] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.452743] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.461556] TCP: Hash tables configured (established 65536 bind 65536) [ 1.464652] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.465924] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.467342] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.469001] RPC: Registered named UNIX socket transport module. [ 1.470168] RPC: Registered udp transport module. [ 1.470952] RPC: Registered tcp transport module. [ 1.473439] RPC: Registered tcp-with-tls transport module. [ 1.474394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.475503] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.476499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.477501] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.478600] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.479705] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.480810] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.482628] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.483934] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.485182] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.486390] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.487936] PCI: CLS 0 bytes, default 64 [ 1.488663] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.489735] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.491064] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.496898] Initialise system trusted keyrings [ 1.497861] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.499262] NFS: Registering the id_resolver key type [ 1.500077] Key type id_resolver registered [ 1.500844] Key type id_legacy registered [ 1.502850] Key type cifs.idmap registered [ 1.512033] xor: automatically using best checksumming function avx [ 1.513236] Key type asymmetric registered [ 1.513888] Asymmetric key parser 'x509' registered [ 1.514715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.515917] io scheduler mq-deadline registered [ 1.516694] io scheduler kyber registered [ 1.517379] io scheduler bfq registered [ 1.518304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.520357] ACPI: button: Power Button [PWRF] [ 1.523565] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.528093] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.532475] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.549615] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.553745] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.556769] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.561788] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.572642] Linux agpgart interface v0.103 [ 1.575054] ACPI: bus type drm_connector registered [ 1.577383] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.579671] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.587095] Console: switching to colour dummy device 80x25 [ 1.593678] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.593681] [drm] features: -context_init [ 1.600091] [drm] number of scanouts: 1 [ 1.603402] [drm] number of cap sets: 0 [ 1.608308] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.677316] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.687100] Console: switching to colour frame buffer device 160x50 [ 1.799323] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.834027] brd: module loaded [ 1.849153] loop: module loaded [ 1.851235] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.858750] virtio_blk virtio3: [vda] 1040616 512-byte logical blocks (533 MB/508 MiB) [ 1.869147] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.872633] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.875359] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.883143] scsi host0: ahci [ 1.885970] scsi host1: ahci [ 1.892270] scsi host2: ahci [ 1.894018] scsi host3: ahci [ 1.895790] scsi host4: ahci [ 1.897686] scsi host5: ahci [ 1.899083] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.902435] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.905772] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.909195] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.912524] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.915919] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.930891] e100: Intel(R) PRO/100 Network Driver [ 1.931721] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.932714] e1000: Intel(R) PRO/1000 Network Driver [ 1.933869] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.936264] e1000e: Intel(R) PRO/1000 Network Driver [ 1.938305] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.940865] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.943061] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.947344] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.950012] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.952597] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.957482] hub 1-0:1.0: USB hub found [ 1.958777] hub 1-0:1.0: 2 ports detected [ 1.960615] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.963825] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.968096] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.976367] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.979197] hub 2-0:1.0: USB hub found [ 1.980855] hub 2-0:1.0: 6 ports detected [ 2.004904] hub 1-0:1.0: USB hub found [ 2.006731] hub 1-0:1.0: 2 ports detected [ 2.008704] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.009835] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.011790] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.013341] hub 3-0:1.0: USB hub found [ 2.014120] hub 3-0:1.0: 2 ports detected [ 2.016080] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.017179] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.018873] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.021141] hub 4-0:1.0: USB hub found [ 2.021780] hub 4-0:1.0: 2 ports detected [ 2.022592] usbcore: registered new interface driver usb-storage [ 2.023691] usbcore: registered new interface driver usbserial_generic [ 2.024973] usbserial: USB Serial support registered for generic [ 2.026258] usbcore: registered new interface driver ftdi_sio [ 2.027756] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.029349] usbcore: registered new interface driver pl2303 [ 2.030518] usbserial: USB Serial support registered for pl2303 [ 2.032101] i8042: PNP: No PS/2 controller found. [ 2.033213] mousedev: PS/2 mouse device common for all mice [ 2.034588] rtc_cmos 00:03: RTC can wake from S4 [ 2.036096] rtc_cmos 00:03: registered as rtc0 [ 2.037110] rtc_cmos 00:03: setting system clock to 2025-06-26T07:45:26 UTC (1750923926) [ 2.038834] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.041264] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.042725] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.044387] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.047964] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.053604] sdhci: Secure Digital Host Controller Interface driver [ 2.055684] sdhci: Copyright(c) Pierre Ossman [ 2.057236] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.060042] usbcore: registered new interface driver usbhid [ 2.061920] usbhid: USB HID core driver [ 2.063350] u32 classifier [ 2.064282] input device check on [ 2.065536] Actions configured [ 2.067511] NET: Registered PF_INET6 protocol family [ 2.071749] Segment Routing with IPv6 [ 2.073004] In-situ OAM (IOAM) with IPv6 [ 2.074379] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.076923] NET: Registered PF_PACKET protocol family [ 2.078627] Bridge firewalling registered [ 2.080022] l2tp_core: L2TP core driver, V2.0 [ 2.081471] Key type dns_resolver registered [ 2.084055] NET: Registered PF_VSOCK protocol family [ 2.088089] IPI shorthand broadcast: enabled [ 2.092000] sched_clock: Marking stable (1951005025, 140240364)->(2196708377, -105462988) [ 2.095532] registered taskstats version 1 [ 2.112069] Loading compiled-in X.509 certificates [ 2.117228] Key type .fscrypt registered [ 2.118950] Key type fscrypt-provisioning registered [ 2.123469] Btrfs loaded, zoned=no, fsverity=no [ 2.128745] Key type encrypted registered [ 2.130979] printk: legacy console [netcon0] enabled [ 2.132765] netconsole: network logging started [ 2.223371] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.227486] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.229576] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.231300] ata3.00: applying bridge limits [ 2.232933] ata2: SATA link down (SStatus 0 SControl 300) [ 2.235883] ata3.00: configured for UDMA/100 [ 2.237563] ata6: SATA link down (SStatus 0 SControl 300) [ 2.240715] ata1: SATA link down (SStatus 0 SControl 300) [ 2.243573] ata4: SATA link down (SStatus 0 SControl 300) [ 2.243777] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.247650] ata5: SATA link down (SStatus 0 SControl 300) [ 2.278006] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.281404] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.321288] IP-Config: Complete: [ 2.322735] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 2.327048] host=192.168.7.16, domain=, nis-domain=(none) [ 2.329609] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.329613] nameserver0=8.8.8.8 [ 2.334364] clk: Disabling unused clocks [ 2.337311] md: Waiting for all devices to be available before autodetect [ 2.339634] md: If you don't use raid, use raid=noautodetect [ 2.341629] md: Autodetecting RAID arrays. [ 2.343173] md: autorun ... [ 2.344284] md: ... autorun DONE. [ 2.362808] EXT4-fs (vda): mounted filesystem 81702eb4-26da-41c1-8cae-6cfd2cee8da7 r/w with ordered data mode. Quota mode: disabled. [ 2.367954] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.369102] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.372787] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.375462] devtmpfs: mounted [ 2.386586] Freeing unused kernel image (initmem) memory: 3528K [ 2.388762] Write protecting the kernel read-only data: 26624k [ 2.392171] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.394716] Run /sbin/init as init process INIT: version 3.14 booting [ 2.491280] usb 2-2: new high-speed USB device number 3 using ehci-pci Starting udev [ 2.536513] udevd[141]: starting version 3.2.14 [ 2.546956] udevd[142]: starting eudev-3.2.14 [ 2.644125] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.701101] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.769389] EXT4-fs (vda): re-mounted 81702eb4-26da-41c1-8cae-6cfd2cee8da7. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-206484964be05fd2f39338f567f700bdd60008bc qemux86-64 /dev/ttyS0 qemux86-64 login: