[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 3448809895 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000006] tsc: Detected 2750.000 MHz processor [ 0.001166] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001204] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001207] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001264] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003286] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003455] ACPI: Early table checksum verification disabled [ 0.003458] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003467] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003473] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003478] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003481] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003483] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003485] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003488] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003490] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003492] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003493] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003494] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003495] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003495] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003496] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003497] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.006796] Zone ranges: [ 0.006798] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006800] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006802] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.006804] Movable zone start for each node [ 0.006804] Early memory node ranges [ 0.006805] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.006806] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.006807] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.006809] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.039483] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039521] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.809475] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.809527] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.809927] ACPI: PM-Timer IO Port: 0x608 [ 0.809941] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.809976] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.809981] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.809984] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.809985] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.809987] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.809988] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.809991] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.809992] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.809997] TSC deadline timer available [ 0.810003] CPU topo: Max. logical packages: 1 [ 0.810004] CPU topo: Max. logical dies: 1 [ 0.810004] CPU topo: Max. dies per package: 1 [ 0.810008] CPU topo: Max. threads per core: 1 [ 0.810010] CPU topo: Num. cores per package: 4 [ 0.810010] CPU topo: Num. threads per package: 4 [ 0.810010] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.810030] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.810061] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.810063] Booting paravirtualized kernel on KVM [ 0.810066] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.810073] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.834504] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.834537] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.834600] random: crng init done [ 0.847984] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.902303] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.902347] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.941480] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.941490] software IO TLB: area num 4. [ 0.941492] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.949748] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.949774] ftrace: allocating 54089 entries in 212 pages [ 0.960922] ftrace: allocated 212 pages with 4 groups [ 0.960981] Dynamic Preempt: full [ 0.963541] rcu: Preemptible hierarchical RCU implementation. [ 0.963543] rcu: RCU event tracing is enabled. [ 0.963544] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.963546] All grace periods are expedited (rcu_expedited). [ 0.963547] Trampoline variant of Tasks RCU enabled. [ 0.963548] Rude variant of Tasks RCU enabled. [ 0.963548] Tracing variant of Tasks RCU enabled. [ 0.963549] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.963550] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.963557] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.963560] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.963561] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.978910] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.979148] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.979240] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.985410] Console: colour VGA+ 80x25 [ 0.985464] printk: legacy console [ttyS0] enabled [ 1.172534] ACPI: Core revision 20240827 [ 1.173413] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.175277] APIC: Switch to symmetric I/O mode setup [ 1.176486] x2apic enabled [ 1.177337] APIC: Switched APIC routing to: physical x2apic [ 1.179683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.180891] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.182959] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 1.184135] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.184960] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.185967] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.186962] Spectre V2 : Mitigation: Retpolines [ 1.187960] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 1.188960] Speculative Store Bypass: Vulnerable [ 1.189980] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.190960] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.191961] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.192962] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.193961] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.217553] Freeing SMP alternatives memory: 56K [ 1.217969] pid_max: default: 32768 minimum: 301 [ 1.218989] LSM: initializing lsm=capability,landlock [ 1.220985] landlock: Up and running. [ 1.221860] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.221968] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.223265] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.224147] Performance Events: AMD PMU driver. [ 1.224967] ... version: 0 [ 1.225770] ... bit width: 48 [ 1.225963] ... generic registers: 4 [ 1.226793] ... value mask: 0000ffffffffffff [ 1.226964] ... max period: 00007fffffffffff [ 1.227963] ... fixed-purpose events: 0 [ 1.228866] ... event mask: 000000000000000f [ 1.229057] signal: max sigframe size: 1776 [ 1.229893] rcu: Hierarchical SRCU implementation. [ 1.229965] rcu: Max phase no-delay instances is 400. [ 1.230896] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.231182] smp: Bringing up secondary CPUs ... [ 1.232079] smpboot: x86: Booting SMP configuration: [ 1.232970] .... node #0, CPUs: #1 #2 #3 [ 1.267006] smp: Brought up 1 node, 4 CPUs [ 1.268708] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 1.269373] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 1.270094] devtmpfs: initialized [ 1.271150] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.271966] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.274044] pinctrl core: initialized pinctrl subsystem [ 1.275399] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.276132] thermal_sys: Registered thermal governor 'step_wise' [ 1.276134] thermal_sys: Registered thermal governor 'user_space' [ 1.276998] cpuidle: using governor menu [ 1.279005] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.279970] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.280979] PCI: Using configuration type 1 for base access [ 1.282043] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.326386] raid6: sse2x4 gen() 13858 MB/s [ 1.343577] raid6: sse2x2 gen() 16757 MB/s [ 1.360336] raid6: sse2x1 gen() 7558 MB/s [ 1.360964] raid6: using algorithm sse2x2 gen() 16757 MB/s [ 1.378272] raid6: .... xor() 12464 MB/s, rmw enabled [ 1.379965] raid6: using ssse3x2 recovery algorithm [ 1.380945] ACPI: Added _OSI(Module Device) [ 1.381966] ACPI: Added _OSI(Processor Device) [ 1.382943] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.383965] ACPI: Added _OSI(Processor Aggregator Device) [ 1.386389] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.389097] ACPI: Interpreter enabled [ 1.389979] ACPI: PM: (supports S0 S3 S5) [ 1.390808] ACPI: Using IOAPIC for interrupt routing [ 1.391008] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.391964] PCI: Using E820 reservations for host bridge windows [ 1.393051] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.395530] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.395971] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.397003] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.398019] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.399035] PCI host bridge to bus 0000:00 [ 1.399862] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.399966] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.400964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.401965] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.402964] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.403983] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.404966] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.406030] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.407444] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.409966] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.412965] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.417777] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.419965] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.421562] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.422965] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.424887] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.428545] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.430642] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.432679] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.435022] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.437037] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.440705] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.441175] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.442888] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.443965] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.445965] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.449966] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.452746] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.455450] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.457160] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.460164] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.461951] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.464966] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.467071] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.468466] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.471610] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.472440] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.473267] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.477327] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.478552] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.479868] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.481349] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.482823] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.483041] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.484042] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.485017] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.486010] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.487031] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.488048] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.489035] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.489988] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.490967] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.491979] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.492978] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.493976] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.494975] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.495979] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.496976] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.498432] iommu: Default domain type: Translated [ 1.498966] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.500095] SCSI subsystem initialized [ 1.501015] ACPI: bus type USB registered [ 1.502003] usbcore: registered new interface driver usbfs [ 1.502983] usbcore: registered new interface driver hub [ 1.503974] usbcore: registered new device driver usb [ 1.504995] pps_core: LinuxPPS API ver. 1 registered [ 1.505965] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.506972] PTP clock support registered [ 1.508308] Bluetooth: Core ver 2.22 [ 1.508981] NET: Registered PF_BLUETOOTH protocol family [ 1.509964] Bluetooth: HCI device and connection manager initialized [ 1.510966] Bluetooth: HCI socket layer initialized [ 1.511966] Bluetooth: L2CAP socket layer initialized [ 1.512969] Bluetooth: SCO socket layer initialized [ 1.515026] PCI: Using ACPI for IRQ routing [ 1.574516] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.574958] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.574958] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.574969] vgaarb: loaded [ 1.575584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.575964] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.580064] clocksource: Switched to clocksource kvm-clock [ 1.581354] pnp: PnP ACPI init [ 1.582179] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.583906] pnp: PnP ACPI: found 5 devices [ 1.592036] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.593927] NET: Registered PF_INET protocol family [ 1.612338] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.615360] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.617193] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.618777] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.620473] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.623718] TCP: Hash tables configured (established 65536 bind 65536) [ 1.624865] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.625977] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.628711] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.630911] RPC: Registered named UNIX socket transport module. [ 1.632209] RPC: Registered udp transport module. [ 1.633213] RPC: Registered tcp transport module. [ 1.634152] RPC: Registered tcp-with-tls transport module. [ 1.635036] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.636148] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.637282] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.638557] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.639952] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.641441] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.642939] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.644718] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.646360] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.647660] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.648958] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.650453] PCI: CLS 0 bytes, default 64 [ 1.651202] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.652317] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.653846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.656817] Initialise system trusted keyrings [ 1.657865] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.659984] NFS: Registering the id_resolver key type [ 1.661078] Key type id_resolver registered [ 1.661933] Key type id_legacy registered [ 1.663039] Key type cifs.idmap registered [ 1.670901] xor: automatically using best checksumming function avx [ 1.672312] Key type asymmetric registered [ 1.672970] Asymmetric key parser 'x509' registered [ 1.673882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.675241] io scheduler mq-deadline registered [ 1.676001] io scheduler kyber registered [ 1.676765] io scheduler bfq registered [ 1.677854] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.682866] ACPI: button: Power Button [PWRF] [ 1.684362] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.686873] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.690185] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.696449] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.698860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.700056] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.701770] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.706662] Linux agpgart interface v0.103 [ 1.707615] ACPI: bus type drm_connector registered [ 1.708593] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.709507] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.712519] Console: switching to colour dummy device 80x25 [ 1.713711] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.713713] [drm] features: -context_init [ 1.715982] [drm] number of scanouts: 1 [ 1.716627] [drm] number of cap sets: 0 [ 1.717725] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.728376] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.762310] Console: switching to colour frame buffer device 160x50 [ 1.790204] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.794349] brd: module loaded [ 1.795577] loop: module loaded [ 1.796419] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.800107] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 1.803442] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.805211] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.806578] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.808414] scsi host0: ahci [ 1.809200] scsi host1: ahci [ 1.809991] scsi host2: ahci [ 1.810891] scsi host3: ahci [ 1.811528] scsi host4: ahci [ 1.812162] scsi host5: ahci [ 1.812673] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.814014] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.815363] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.816732] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.819135] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.820533] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.827750] e100: Intel(R) PRO/100 Network Driver [ 1.828781] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.829966] e1000: Intel(R) PRO/1000 Network Driver [ 1.831012] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.832213] e1000e: Intel(R) PRO/1000 Network Driver [ 1.833119] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.834365] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.835537] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.837696] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.839222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.840835] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.843121] hub 1-0:1.0: USB hub found [ 1.843736] hub 1-0:1.0: 2 ports detected [ 1.844657] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.846326] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.848297] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.854848] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.856033] hub 2-0:1.0: USB hub found [ 1.856687] hub 2-0:1.0: 6 ports detected [ 1.877979] hub 1-0:1.0: USB hub found [ 1.878750] hub 1-0:1.0: 2 ports detected [ 1.879626] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.880815] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.882497] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.883900] hub 3-0:1.0: USB hub found [ 1.884910] hub 3-0:1.0: 2 ports detected [ 1.886450] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.887423] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.889112] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.890635] hub 4-0:1.0: USB hub found [ 1.891471] hub 4-0:1.0: 2 ports detected [ 1.892580] usbcore: registered new interface driver usb-storage [ 1.893753] usbcore: registered new interface driver usbserial_generic [ 1.895273] usbserial: USB Serial support registered for generic [ 1.896636] usbcore: registered new interface driver ftdi_sio [ 1.897692] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.899255] usbcore: registered new interface driver pl2303 [ 1.900409] usbserial: USB Serial support registered for pl2303 [ 1.901660] i8042: PNP: No PS/2 controller found. [ 1.902754] mousedev: PS/2 mouse device common for all mice [ 1.904124] rtc_cmos 00:03: RTC can wake from S4 [ 1.905642] rtc_cmos 00:03: registered as rtc0 [ 1.906633] rtc_cmos 00:03: setting system clock to 2025-06-26T17:54:53 UTC (1750960493) [ 1.908396] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.910265] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.910276] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.911621] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.913404] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.916782] sdhci: Secure Digital Host Controller Interface driver [ 1.918115] sdhci: Copyright(c) Pierre Ossman [ 1.919083] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.920413] usbcore: registered new interface driver usbhid [ 1.921597] usbhid: USB HID core driver [ 1.922448] u32 classifier [ 1.923030] input device check on [ 1.923789] Actions configured [ 1.924754] NET: Registered PF_INET6 protocol family [ 1.926116] Segment Routing with IPv6 [ 1.926866] In-situ OAM (IOAM) with IPv6 [ 1.927643] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.928876] NET: Registered PF_PACKET protocol family [ 1.929779] Bridge firewalling registered [ 1.930523] l2tp_core: L2TP core driver, V2.0 [ 1.935360] Key type dns_resolver registered [ 1.936425] NET: Registered PF_VSOCK protocol family [ 1.937946] IPI shorthand broadcast: enabled [ 1.939862] sched_clock: Marking stable (1741002812, 198801206)->(2073997625, -134193607) [ 1.941540] registered taskstats version 1 [ 1.942468] Loading compiled-in X.509 certificates [ 2.030363] Key type .fscrypt registered [ 2.031378] Key type fscrypt-provisioning registered [ 2.032837] Btrfs loaded, zoned=no, fsverity=no [ 2.090094] Key type encrypted registered [ 2.091134] printk: legacy console [netcon0] enabled [ 2.091995] netconsole: network logging started [ 2.135426] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.137171] ata4: SATA link down (SStatus 0 SControl 300) [ 2.138441] ata6: SATA link down (SStatus 0 SControl 300) [ 2.139566] ata2: SATA link down (SStatus 0 SControl 300) [ 2.140728] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.141784] ata3.00: applying bridge limits [ 2.142644] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.144302] ata5: SATA link down (SStatus 0 SControl 300) [ 2.145645] ata1: SATA link down (SStatus 0 SControl 300) [ 2.146865] ata3.00: configured for UDMA/100 [ 2.148376] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.177092] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.178456] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.200836] IP-Config: Complete: [ 2.201697] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 2.203937] host=192.168.7.8, domain=, nis-domain=(none) [ 2.205833] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.205835] nameserver0=8.8.8.8 [ 2.209122] clk: Disabling unused clocks [ 2.210832] md: Waiting for all devices to be available before autodetect [ 2.212071] md: If you don't use raid, use raid=noautodetect [ 2.213100] md: Autodetecting RAID arrays. [ 2.213837] md: autorun ... [ 2.214359] md: ... autorun DONE. [ 2.256868] EXT4-fs (vda): mounted filesystem f0dea8e7-15ec-4f89-aac5-8bd534157420 r/w with ordered data mode. Quota mode: disabled. [ 2.259289] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.260495] devtmpfs: mounted [ 2.262966] Freeing unused kernel image (initmem) memory: 3528K [ 2.263951] Write protecting the kernel read-only data: 26624k [ 2.265385] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.266522] Run /sbin/init as init process INIT: version 3.14 booting [ 2.276946] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.279025] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 2.374643] udevd[138]: starting version 3.2.14 [ 2.380338] udevd[139]: starting eudev-3.2.14 [ 2.487837] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.677588] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.731231] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.790580] EXT4-fs (vda): re-mounted f0dea8e7-15ec-4f89-aac5-8bd534157420. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-142b39889c5837087f73a304cb13e4bb5f849d92 qemux86-64 /dev/ttyS0 qemux86-64 login: