[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 2419275448 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2750.000 MHz processor [ 0.000892] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000924] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000926] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000974] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002822] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003030] ACPI: Early table checksum verification disabled [ 0.003032] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003037] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003041] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003044] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003046] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003048] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003049] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003051] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003052] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003054] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003054] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003055] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003055] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003056] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003056] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003057] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.005342] Zone ranges: [ 0.005343] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005345] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005346] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005347] Movable zone start for each node [ 0.005347] Early memory node ranges [ 0.005347] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005349] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.005349] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005350] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.007942] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.007963] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.609357] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.609408] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.609774] ACPI: PM-Timer IO Port: 0x608 [ 0.609786] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.609811] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.609813] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.609815] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.609816] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.609817] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.609817] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.609820] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.609820] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.609825] TSC deadline timer available [ 0.609829] CPU topo: Max. logical packages: 1 [ 0.609830] CPU topo: Max. logical dies: 1 [ 0.609830] CPU topo: Max. dies per package: 1 [ 0.609834] CPU topo: Max. threads per core: 1 [ 0.609834] CPU topo: Num. cores per package: 4 [ 0.609835] CPU topo: Num. threads per package: 4 [ 0.609835] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.609850] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.609867] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.609868] Booting paravirtualized kernel on KVM [ 0.609870] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.609878] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.611238] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.611264] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.611326] random: crng init done [ 0.687179] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.703837] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.703880] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.706120] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.706125] software IO TLB: area num 4. [ 0.706126] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.712922] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.712946] ftrace: allocating 54089 entries in 212 pages [ 0.722828] ftrace: allocated 212 pages with 4 groups [ 0.722863] Dynamic Preempt: full [ 0.725164] rcu: Preemptible hierarchical RCU implementation. [ 0.725164] rcu: RCU event tracing is enabled. [ 0.725165] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.725166] All grace periods are expedited (rcu_expedited). [ 0.725166] Trampoline variant of Tasks RCU enabled. [ 0.725167] Rude variant of Tasks RCU enabled. [ 0.725167] Tracing variant of Tasks RCU enabled. [ 0.725168] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.725168] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.725173] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.725175] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.725176] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.741538] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.741741] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.741816] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.746122] Console: colour VGA+ 80x25 [ 0.746158] printk: legacy console [ttyS0] enabled [ 0.873358] ACPI: Core revision 20240827 [ 0.874103] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.875692] APIC: Switch to symmetric I/O mode setup [ 0.876666] x2apic enabled [ 0.877396] APIC: Switched APIC routing to: physical x2apic [ 0.879255] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.880406] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.882184] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.884203] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.885080] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.885187] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.886186] Spectre V2 : Mitigation: Retpolines [ 0.887185] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.888185] Speculative Store Bypass: Vulnerable [ 0.889197] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.890185] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.891185] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.892186] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.893185] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.913803] Freeing SMP alternatives memory: 56K [ 0.914188] pid_max: default: 32768 minimum: 301 [ 0.915200] LSM: initializing lsm=capability,landlock [ 0.916213] landlock: Up and running. [ 0.917209] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.918188] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.919407] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.920328] Performance Events: AMD PMU driver. [ 0.921189] ... version: 0 [ 0.921972] ... bit width: 48 [ 0.922186] ... generic registers: 4 [ 0.922961] ... value mask: 0000ffffffffffff [ 0.923187] ... max period: 00007fffffffffff [ 0.924186] ... fixed-purpose events: 0 [ 0.924948] ... event mask: 000000000000000f [ 0.925296] signal: max sigframe size: 1776 [ 0.926146] rcu: Hierarchical SRCU implementation. [ 0.926187] rcu: Max phase no-delay instances is 400. [ 0.927214] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.928347] smp: Bringing up secondary CPUs ... [ 0.929255] smpboot: x86: Booting SMP configuration: [ 0.930107] .... node #0, CPUs: #1 #2 #3 [ 0.964232] smp: Brought up 1 node, 4 CPUs [ 0.966017] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 0.966531] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 0.967291] devtmpfs: initialized [ 0.968271] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.969190] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.971222] pinctrl core: initialized pinctrl subsystem [ 0.972412] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.973283] thermal_sys: Registered thermal governor 'step_wise' [ 0.973285] thermal_sys: Registered thermal governor 'user_space' [ 0.974203] cpuidle: using governor menu [ 0.975995] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.976190] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.977198] PCI: Using configuration type 1 for base access [ 0.978207] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.001186] raid6: sse2x4 gen() 23898 MB/s [ 1.018186] raid6: sse2x2 gen() 25778 MB/s [ 1.035188] raid6: sse2x1 gen() 7850 MB/s [ 1.036187] raid6: using algorithm sse2x2 gen() 25778 MB/s [ 1.053186] raid6: .... xor() 19431 MB/s, rmw enabled [ 1.054053] raid6: using ssse3x2 recovery algorithm [ 1.054252] ACPI: Added _OSI(Module Device) [ 1.054976] ACPI: Added _OSI(Processor Device) [ 1.055187] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.055994] ACPI: Added _OSI(Processor Aggregator Device) [ 1.056592] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.059253] ACPI: Interpreter enabled [ 1.060194] ACPI: PM: (supports S0 S3 S5) [ 1.060886] ACPI: Using IOAPIC for interrupt routing [ 1.061202] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.062187] PCI: Using E820 reservations for host bridge windows [ 1.063229] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.065016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.065191] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.066212] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.067214] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.068225] PCI host bridge to bus 0000:00 [ 1.068914] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.069187] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.070186] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.071187] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.072187] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.073187] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.074187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.075166] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.075734] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.077188] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.078934] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.084188] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.087188] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.088706] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.090049] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.091187] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.096016] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.097671] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.099956] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.103226] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.105258] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.108239] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.109280] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.111695] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.113188] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.114681] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.118188] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.120785] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.122574] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.123944] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.126187] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.127851] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.129600] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.130906] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.131520] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.135585] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.136556] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.137373] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.140434] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.141703] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.143098] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.144772] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.146091] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.146289] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.147256] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.148242] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.149232] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.150249] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.151252] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.152256] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.153216] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.154198] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.155197] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.156193] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.157198] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.158195] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.159190] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.160190] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.161545] iommu: Default domain type: Translated [ 1.162188] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.163343] SCSI subsystem initialized [ 1.164229] ACPI: bus type USB registered [ 1.164944] usbcore: registered new interface driver usbfs [ 1.165193] usbcore: registered new interface driver hub [ 1.166105] usbcore: registered new device driver usb [ 1.166210] pps_core: LinuxPPS API ver. 1 registered [ 1.167049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.167189] PTP clock support registered [ 1.168331] Bluetooth: Core ver 2.22 [ 1.168970] NET: Registered PF_BLUETOOTH protocol family [ 1.169187] Bluetooth: HCI device and connection manager initialized [ 1.170189] Bluetooth: HCI socket layer initialized [ 1.171022] Bluetooth: L2CAP socket layer initialized [ 1.171189] Bluetooth: SCO socket layer initialized [ 1.172021] PCI: Using ACPI for IRQ routing [ 1.220348] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.221183] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.221183] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.221190] vgaarb: loaded [ 1.221845] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.222187] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.226276] clocksource: Switched to clocksource kvm-clock [ 1.227429] pnp: PnP ACPI init [ 1.228121] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.229538] pnp: PnP ACPI: found 5 devices [ 1.238031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.239599] NET: Registered PF_INET protocol family [ 1.261398] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.263832] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.265318] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.266651] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.268059] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.270824] TCP: Hash tables configured (established 65536 bind 65536) [ 1.271995] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.273194] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.274502] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.277018] RPC: Registered named UNIX socket transport module. [ 1.278074] RPC: Registered udp transport module. [ 1.278888] RPC: Registered tcp transport module. [ 1.279692] RPC: Registered tcp-with-tls transport module. [ 1.280634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.281788] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.282866] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.283948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.285144] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.286311] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.287499] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.288918] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.290661] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.292640] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.293934] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.295579] PCI: CLS 0 bytes, default 64 [ 1.296376] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.297515] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.298934] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.318174] Initialise system trusted keyrings [ 1.319133] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.320499] NFS: Registering the id_resolver key type [ 1.321399] Key type id_resolver registered [ 1.322146] Key type id_legacy registered [ 1.323335] Key type cifs.idmap registered [ 1.331640] xor: automatically using best checksumming function avx [ 1.332925] Key type asymmetric registered [ 1.333616] Asymmetric key parser 'x509' registered [ 1.334493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.335790] io scheduler mq-deadline registered [ 1.336593] io scheduler kyber registered [ 1.341331] io scheduler bfq registered [ 1.342283] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.344610] ACPI: button: Power Button [PWRF] [ 1.348208] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.354950] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.361585] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.386339] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.390566] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.393939] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.397565] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.403020] Linux agpgart interface v0.103 [ 1.404985] ACPI: bus type drm_connector registered [ 1.407330] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.409740] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.418850] Console: switching to colour dummy device 80x25 [ 1.438144] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.438148] [drm] features: -context_init [ 1.444154] [drm] number of scanouts: 1 [ 1.445919] [drm] number of cap sets: 0 [ 1.449859] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.455343] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.485470] Console: switching to colour frame buffer device 160x50 [ 1.518176] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.526670] brd: module loaded [ 1.529766] loop: module loaded [ 1.531617] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.536873] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 1.544331] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.548175] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.551162] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.576937] scsi host0: ahci [ 1.578621] scsi host1: ahci [ 1.580265] scsi host2: ahci [ 1.581875] scsi host3: ahci [ 1.583564] scsi host4: ahci [ 1.585182] scsi host5: ahci [ 1.586623] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.590490] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.594354] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.598243] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.602074] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.605977] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.612643] e100: Intel(R) PRO/100 Network Driver [ 1.614968] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.617469] e1000: Intel(R) PRO/1000 Network Driver [ 1.619708] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.622339] e1000e: Intel(R) PRO/1000 Network Driver [ 1.624628] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.627356] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.629827] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.634004] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.637638] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.641194] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.645429] hub 1-0:1.0: USB hub found [ 1.647285] hub 1-0:1.0: 2 ports detected [ 1.649753] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.653000] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.657430] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.667158] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.670524] hub 2-0:1.0: USB hub found [ 1.672175] hub 2-0:1.0: 6 ports detected [ 1.695652] hub 1-0:1.0: USB hub found [ 1.697464] hub 1-0:1.0: 2 ports detected [ 1.699606] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.701362] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.704630] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.707699] hub 3-0:1.0: USB hub found [ 1.709635] hub 3-0:1.0: 2 ports detected [ 1.715038] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.717526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.721140] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.724048] hub 4-0:1.0: USB hub found [ 1.725804] hub 4-0:1.0: 2 ports detected [ 1.727977] usbcore: registered new interface driver usb-storage [ 1.730940] usbcore: registered new interface driver usbserial_generic [ 1.733942] usbserial: USB Serial support registered for generic [ 1.736684] usbcore: registered new interface driver ftdi_sio [ 1.739294] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.742657] usbcore: registered new interface driver pl2303 [ 1.745948] usbserial: USB Serial support registered for pl2303 [ 1.749549] i8042: PNP: No PS/2 controller found. [ 1.751825] mousedev: PS/2 mouse device common for all mice [ 1.754569] rtc_cmos 00:03: RTC can wake from S4 [ 1.757720] rtc_cmos 00:03: registered as rtc0 [ 1.760638] rtc_cmos 00:03: setting system clock to 2025-06-27T09:22:38 UTC (1751016158) [ 1.765105] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.769574] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.769649] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.772490] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.776550] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.783117] sdhci: Secure Digital Host Controller Interface driver [ 1.786011] sdhci: Copyright(c) Pierre Ossman [ 1.788141] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.790999] usbcore: registered new interface driver usbhid [ 1.793558] usbhid: USB HID core driver [ 1.795426] u32 classifier [ 1.796702] input device check on [ 1.798395] Actions configured [ 1.800219] NET: Registered PF_INET6 protocol family [ 1.803032] Segment Routing with IPv6 [ 1.804786] In-situ OAM (IOAM) with IPv6 [ 1.806757] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.809647] NET: Registered PF_PACKET protocol family [ 1.812029] Bridge firewalling registered [ 1.813918] l2tp_core: L2TP core driver, V2.0 [ 1.815982] Key type dns_resolver registered [ 1.818136] NET: Registered PF_VSOCK protocol family [ 1.821057] IPI shorthand broadcast: enabled [ 1.825141] sched_clock: Marking stable (1688007990, 136436200)->(1913401219, -88957029) [ 1.829060] registered taskstats version 1 [ 1.831091] Loading compiled-in X.509 certificates [ 1.853628] Key type .fscrypt registered [ 1.855562] Key type fscrypt-provisioning registered [ 1.870183] Btrfs loaded, zoned=no, fsverity=no [ 1.876738] Key type encrypted registered [ 1.878761] printk: legacy console [netcon0] enabled [ 1.881196] netconsole: network logging started [ 1.911488] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.915312] ata4: SATA link down (SStatus 0 SControl 300) [ 1.917391] ata1: SATA link down (SStatus 0 SControl 300) [ 1.920392] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.923676] ata2: SATA link down (SStatus 0 SControl 300) [ 1.926106] ata6: SATA link down (SStatus 0 SControl 300) [ 1.928825] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.934000] ata3.00: applying bridge limits [ 1.936330] ata5: SATA link down (SStatus 0 SControl 300) [ 1.940115] ata3.00: configured for UDMA/100 [ 1.942829] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.974901] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.978256] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.002471] IP-Config: Complete: [ 2.004111] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 2.008833] host=192.168.7.4, domain=, nis-domain=(none) [ 2.011539] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.011542] nameserver0=8.8.8.8 [ 2.016923] clk: Disabling unused clocks [ 2.019969] md: Waiting for all devices to be available before autodetect [ 2.022689] md: If you don't use raid, use raid=noautodetect [ 2.024986] md: Autodetecting RAID arrays. [ 2.026671] md: autorun ... [ 2.027825] md: ... autorun DONE. [ 2.037908] EXT4-fs (vda): mounted filesystem ab7644e1-4c98-42ec-ab55-bce96a2cf76b r/w with ordered data mode. Quota mode: disabled. [ 2.042517] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.045020] devtmpfs: mounted [ 2.049491] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.050886] Freeing unused kernel image (initmem) memory: 3528K [ 2.054193] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.056393] Write protecting the kernel read-only data: 26624k [ 2.064155] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.066510] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 2.145218] udevd[139]: starting version 3.2.14 [ 2.155105] udevd[140]: starting eudev-3.2.14 [ 2.174468] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.306578] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.362013] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.423283] EXT4-fs (vda): re-mounted ab7644e1-4c98-42ec-ab55-bce96a2cf76b. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-ace0bf875c68b165c949768ad200bb2d1ef6c587 qemux86-64 /dev/ttyS0 qemux86-64 login: