[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 3298127377 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.000 MHz processor [ 0.000906] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000938] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000940] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000987] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002850] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.005007] ACPI: Early table checksum verification disabled [ 0.005010] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.005016] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005021] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005025] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005027] ACPI: FACS 0x000000007FFE0000 000040 [ 0.005028] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005029] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005031] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005032] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005034] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.005035] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.005035] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.005036] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.005036] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.005037] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.005037] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.005075] Zone ranges: [ 0.005076] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005077] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005078] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005079] Movable zone start for each node [ 0.005080] Early memory node ranges [ 0.005080] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005081] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.005082] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005083] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.042930] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.042954] On node 0, zone DMA: 97 pages in unavailable ranges [ 2.450320] On node 0, zone Normal: 40 pages in unavailable ranges [ 2.450375] On node 0, zone Normal: 5120 pages in unavailable ranges [ 2.451813] ACPI: PM-Timer IO Port: 0x608 [ 2.451827] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 2.451855] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 2.451857] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 2.451859] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 2.451860] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 2.451861] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 2.451861] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 2.451864] ACPI: Using ACPI (MADT) for SMP configuration information [ 2.451864] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 2.451869] TSC deadline timer available [ 2.451873] CPU topo: Max. logical packages: 1 [ 2.451874] CPU topo: Max. logical dies: 1 [ 2.451874] CPU topo: Max. dies per package: 1 [ 2.451877] CPU topo: Max. threads per core: 1 [ 2.451878] CPU topo: Num. cores per package: 4 [ 2.451878] CPU topo: Num. threads per package: 4 [ 2.451878] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 2.451895] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 2.451912] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 2.451913] Booting paravirtualized kernel on KVM [ 2.451915] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 2.451920] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 2.453840] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 2.453865] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 2.453922] random: crng init done [ 2.477246] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 2.518533] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 2.518575] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 2.522684] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 2.522688] software IO TLB: area num 4. [ 2.522689] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 2.532168] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 2.532189] ftrace: allocating 54089 entries in 212 pages [ 2.542432] ftrace: allocated 212 pages with 4 groups [ 2.542472] Dynamic Preempt: full [ 2.544274] rcu: Preemptible hierarchical RCU implementation. [ 2.544275] rcu: RCU event tracing is enabled. [ 2.544275] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 2.544276] All grace periods are expedited (rcu_expedited). [ 2.544277] Trampoline variant of Tasks RCU enabled. [ 2.544277] Rude variant of Tasks RCU enabled. [ 2.544277] Tracing variant of Tasks RCU enabled. [ 2.544278] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 2.544278] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.544283] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.544285] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.544286] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.553444] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.553639] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 2.553714] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 2.558040] Console: colour VGA+ 80x25 [ 2.558082] printk: legacy console [ttyS0] enabled [ 2.695432] ACPI: Core revision 20240827 [ 2.696379] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 2.698866] APIC: Switch to symmetric I/O mode setup [ 2.700128] x2apic enabled [ 2.701005] APIC: Switched APIC routing to: physical x2apic [ 2.703350] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 2.704648] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 2.706847] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 2.709007] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 2.709849] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 2.710851] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 2.711850] Spectre V2 : Mitigation: Retpolines [ 2.712848] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 2.713849] Speculative Store Bypass: Vulnerable [ 2.714862] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 2.715847] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 2.716847] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 2.717848] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 2.718847] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 2.739292] Freeing SMP alternatives memory: 56K [ 2.739850] pid_max: default: 32768 minimum: 301 [ 2.740608] LSM: initializing lsm=capability,landlock [ 2.740874] landlock: Up and running. [ 2.741867] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.742852] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.744037] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 2.744965] Performance Events: AMD PMU driver. [ 2.745711] ... version: 0 [ 2.745849] ... bit width: 48 [ 2.746529] ... generic registers: 4 [ 2.746849] ... value mask: 0000ffffffffffff [ 2.747694] ... max period: 00007fffffffffff [ 2.747850] ... fixed-purpose events: 0 [ 2.748523] ... event mask: 000000000000000f [ 2.748925] signal: max sigframe size: 1776 [ 2.749663] rcu: Hierarchical SRCU implementation. [ 2.749850] rcu: Max phase no-delay instances is 400. [ 2.750734] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.750986] smp: Bringing up secondary CPUs ... [ 2.751810] smpboot: x86: Booting SMP configuration: [ 2.751852] .... node #0, CPUs: #1 #2 #3 [ 2.790884] smp: Brought up 1 node, 4 CPUs [ 2.792542] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 2.793184] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 2.793927] devtmpfs: initialized [ 2.794558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.794853] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.795873] pinctrl core: initialized pinctrl subsystem [ 2.798026] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.798957] thermal_sys: Registered thermal governor 'step_wise' [ 2.798958] thermal_sys: Registered thermal governor 'user_space' [ 2.799865] cpuidle: using governor menu [ 2.801629] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 2.801854] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 2.802858] PCI: Using configuration type 1 for base access [ 2.803867] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.823692] raid6: sse2x4 gen() 14809 MB/s [ 2.839919] raid6: sse2x2 gen() 14295 MB/s [ 2.856945] raid6: sse2x1 gen() 7816 MB/s [ 2.857828] raid6: using algorithm sse2x4 gen() 14809 MB/s [ 2.874991] raid6: .... xor() 2384 MB/s, rmw enabled [ 2.876852] raid6: using ssse3x2 recovery algorithm [ 2.877948] ACPI: Added _OSI(Module Device) [ 2.878834] ACPI: Added _OSI(Processor Device) [ 2.879852] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.880851] ACPI: Added _OSI(Processor Aggregator Device) [ 2.882435] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 2.885935] ACPI: Interpreter enabled [ 2.886857] ACPI: PM: (supports S0 S3 S5) [ 2.887667] ACPI: Using IOAPIC for interrupt routing [ 2.887872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.889850] PCI: Using E820 reservations for host bridge windows [ 2.890914] ACPI: Enabled 2 GPEs in block 00 to 3F [ 2.910315] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.911855] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.912875] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 2.913878] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 2.915894] PCI host bridge to bus 0000:00 [ 2.916569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.916850] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.917849] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.919851] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 2.920850] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 2.921850] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 2.922851] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.923805] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 2.926286] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.929851] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 2.932850] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 2.938851] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 2.942850] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 2.944379] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.947625] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 2.948745] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 2.954851] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 2.959375] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 2.962307] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 2.964802] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 2.966857] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 2.970756] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 2.971912] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.973361] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.975850] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 2.978440] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 2.982341] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 2.985412] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 2.988363] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 2.990421] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 2.993050] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 2.994415] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 2.997111] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 2.999889] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 3.002144] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 3.004309] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 3.006215] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 3.008032] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 3.012457] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 3.013249] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 3.014534] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 3.018156] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 3.019897] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 3.021898] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 3.022891] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 3.023890] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 3.024889] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 3.025904] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 3.026893] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 3.027892] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 3.029872] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 3.030853] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 3.031853] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 3.032864] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 3.033855] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 3.034858] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 3.035860] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 3.036855] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 3.038109] iommu: Default domain type: Translated [ 3.038849] iommu: DMA domain TLB invalidation policy: lazy mode [ 3.039908] SCSI subsystem initialized [ 3.040881] ACPI: bus type USB registered [ 3.041862] usbcore: registered new interface driver usbfs [ 3.042807] usbcore: registered new interface driver hub [ 3.043854] usbcore: registered new device driver usb [ 3.044709] pps_core: LinuxPPS API ver. 1 registered [ 3.044849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.046853] PTP clock support registered [ 3.047994] Bluetooth: Core ver 2.22 [ 3.047994] NET: Registered PF_BLUETOOTH protocol family [ 3.048850] Bluetooth: HCI device and connection manager initialized [ 3.050853] Bluetooth: HCI socket layer initialized [ 3.051660] Bluetooth: L2CAP socket layer initialized [ 3.051851] Bluetooth: SCO socket layer initialized [ 3.066904] PCI: Using ACPI for IRQ routing [ 3.116891] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 3.117846] pci 0000:00:03.0: vgaarb: bridge control possible [ 3.117846] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.121857] vgaarb: loaded [ 3.122527] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 3.123852] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 3.129915] clocksource: Switched to clocksource kvm-clock [ 3.131709] pnp: PnP ACPI init [ 3.132509] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 3.134269] pnp: PnP ACPI: found 5 devices [ 3.142713] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.144735] NET: Registered PF_INET protocol family [ 3.145886] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.148607] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.150853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.152574] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.167007] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.185187] TCP: Hash tables configured (established 65536 bind 65536) [ 3.186705] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.188244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.189925] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.191531] RPC: Registered named UNIX socket transport module. [ 3.192896] RPC: Registered udp transport module. [ 3.193962] RPC: Registered tcp transport module. [ 3.195025] RPC: Registered tcp-with-tls transport module. [ 3.196256] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.197714] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.199065] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.200596] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.202144] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 3.203692] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 3.205213] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 3.206990] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 3.209219] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 3.210758] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 3.212315] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 3.213915] PCI: CLS 0 bytes, default 64 [ 3.214872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.216329] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 3.218108] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 3.221467] Initialise system trusted keyrings [ 3.222322] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 3.223747] NFS: Registering the id_resolver key type [ 3.224893] Key type id_resolver registered [ 3.225758] Key type id_legacy registered [ 3.234677] Key type cifs.idmap registered [ 3.242632] xor: automatically using best checksumming function avx [ 3.243809] Key type asymmetric registered [ 3.244482] Asymmetric key parser 'x509' registered [ 3.245303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 3.246507] io scheduler mq-deadline registered [ 3.247264] io scheduler kyber registered [ 3.247935] io scheduler bfq registered [ 3.248821] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.253281] ACPI: button: Power Button [PWRF] [ 3.254537] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 3.256335] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 3.257998] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 3.263357] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 3.265079] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.266262] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.267674] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.271554] Linux agpgart interface v0.103 [ 3.272320] ACPI: bus type drm_connector registered [ 3.273209] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 3.274128] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 3.277019] Console: switching to colour dummy device 80x25 [ 3.278151] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.278153] [drm] features: -context_init [ 3.281055] [drm] number of scanouts: 1 [ 3.281939] [drm] number of cap sets: 0 [ 3.283065] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 3.306916] fbcon: virtio_gpudrmfb (fb0) is primary device [ 3.326283] Console: switching to colour frame buffer device 160x50 [ 3.352876] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.374039] brd: module loaded [ 3.375481] loop: module loaded [ 3.376322] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 3.385874] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 3.389340] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 3.391260] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 3.392704] ahci 0000:00:1f.2: flags: 64bit ncq only [ 3.394562] scsi host0: ahci [ 3.395382] scsi host1: ahci [ 3.396173] scsi host2: ahci [ 3.396964] scsi host3: ahci [ 3.397736] scsi host4: ahci [ 3.398540] scsi host5: ahci [ 3.399243] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 3.401079] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 3.402925] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 3.404771] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 3.406590] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 3.408453] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 3.411982] e100: Intel(R) PRO/100 Network Driver [ 3.412932] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.413882] e1000: Intel(R) PRO/1000 Network Driver [ 3.414715] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.415701] e1000e: Intel(R) PRO/1000 Network Driver [ 3.416528] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.417541] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.418488] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.420044] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.421235] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.422575] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 3.425102] hub 1-0:1.0: USB hub found [ 3.425772] hub 1-0:1.0: 2 ports detected [ 3.426654] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.427926] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.429419] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 3.436223] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.437355] hub 2-0:1.0: USB hub found [ 3.438019] hub 2-0:1.0: 6 ports detected [ 3.459361] hub 1-0:1.0: USB hub found [ 3.461066] hub 1-0:1.0: 2 ports detected [ 3.462860] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.463959] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.465424] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 3.466637] hub 3-0:1.0: USB hub found [ 3.467296] hub 3-0:1.0: 2 ports detected [ 3.468794] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.469700] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.471021] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 3.472208] hub 4-0:1.0: USB hub found [ 3.472848] hub 4-0:1.0: 2 ports detected [ 3.473617] usbcore: registered new interface driver usb-storage [ 3.474629] usbcore: registered new interface driver usbserial_generic [ 3.475754] usbserial: USB Serial support registered for generic [ 3.476823] usbcore: registered new interface driver ftdi_sio [ 3.477794] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.479008] usbcore: registered new interface driver pl2303 [ 3.479933] usbserial: USB Serial support registered for pl2303 [ 3.481093] i8042: PNP: No PS/2 controller found. [ 3.481946] mousedev: PS/2 mouse device common for all mice [ 3.482986] rtc_cmos 00:03: RTC can wake from S4 [ 3.484184] rtc_cmos 00:03: registered as rtc0 [ 3.484980] rtc_cmos 00:03: setting system clock to 2025-06-28T10:13:09 UTC (1751105589) [ 3.486346] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 3.487848] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 3.488377] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.489498] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 3.492769] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 3.493708] sdhci: Secure Digital Host Controller Interface driver [ 3.493709] sdhci: Copyright(c) Pierre Ossman [ 3.499578] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.512664] usbcore: registered new interface driver usbhid [ 3.514873] usbhid: USB HID core driver [ 3.515560] u32 classifier [ 3.516018] input device check on [ 3.516610] Actions configured [ 3.517246] NET: Registered PF_INET6 protocol family [ 3.518419] Segment Routing with IPv6 [ 3.519061] In-situ OAM (IOAM) with IPv6 [ 3.519736] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.520794] NET: Registered PF_PACKET protocol family [ 3.521626] Bridge firewalling registered [ 3.522307] l2tp_core: L2TP core driver, V2.0 [ 3.523035] Key type dns_resolver registered [ 3.523844] NET: Registered PF_VSOCK protocol family [ 3.525047] IPI shorthand broadcast: enabled [ 3.526601] sched_clock: Marking stable (3378002188, 148201804)->(3558420616, -32216624) [ 3.528035] registered taskstats version 1 [ 3.528751] Loading compiled-in X.509 certificates [ 3.530249] Key type .fscrypt registered [ 3.530902] Key type fscrypt-provisioning registered [ 3.533463] Btrfs loaded, zoned=no, fsverity=no [ 3.543948] Key type encrypted registered [ 3.545054] printk: legacy console [netcon0] enabled [ 3.546187] netconsole: network logging started [ 3.678244] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.715808] ata5: SATA link down (SStatus 0 SControl 300) [ 3.717065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.723707] ata4: SATA link down (SStatus 0 SControl 300) [ 3.726371] ata6: SATA link down (SStatus 0 SControl 300) [ 3.727460] ata1: SATA link down (SStatus 0 SControl 300) [ 3.728978] ata2: SATA link down (SStatus 0 SControl 300) [ 3.729992] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.730954] ata3.00: applying bridge limits [ 3.731794] ata3.00: configured for UDMA/100 [ 3.732842] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.761429] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.763065] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.785260] IP-Config: Complete: [ 3.785872] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 3.788757] host=192.168.7.2, domain=, nis-domain=(none) [ 3.791092] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.791095] nameserver0=8.8.8.8 [ 3.796131] clk: Disabling unused clocks [ 3.798463] md: Waiting for all devices to be available before autodetect [ 3.800769] md: If you don't use raid, use raid=noautodetect [ 3.802706] md: Autodetecting RAID arrays. [ 3.804107] md: autorun ... [ 3.805087] md: ... autorun DONE. [ 3.813065] EXT4-fs (vda): mounted filesystem ec45fffc-8d3d-468d-a915-27469d00f1f0 r/w with ordered data mode. Quota mode: disabled. [ 3.817351] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.819709] devtmpfs: mounted [ 3.822451] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 3.824957] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 3.825103] Freeing unused kernel image (initmem) memory: 3528K [ 3.829082] Write protecting the kernel read-only data: 26624k [ 3.831493] Freeing unused kernel image (rodata/data gap) memory: 284K [ 3.833869] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 3.938240] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.962882] udevd[138]: starting version 3.2.14 [ 3.970253] udevd[139]: starting eudev-3.2.14 [ 4.072626] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 4.125721] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 4.185889] EXT4-fs (vda): re-mounted ec45fffc-8d3d-468d-a915-27469d00f1f0. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-fb8f4541e96036dd0b9c1c502667d57cf74c4d38 qemux86-64 /dev/ttyS0 qemux86-64 login: