[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1033484363 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.000 MHz processor [ 0.000908] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000937] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000939] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000983] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002836] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.086149] ACPI: Early table checksum verification disabled [ 0.086155] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.086164] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086169] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086175] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086177] ACPI: FACS 0x000000007FFE0000 000040 [ 0.086179] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086180] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086182] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086183] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.086184] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.086185] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.086186] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.086187] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.086187] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.086188] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.086188] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.086236] Zone ranges: [ 0.086236] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.086237] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.086238] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.086239] Movable zone start for each node [ 0.086240] Early memory node ranges [ 0.086240] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.086241] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.086242] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.086243] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.086976] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.086997] On node 0, zone DMA: 97 pages in unavailable ranges [ 1.530842] On node 0, zone Normal: 40 pages in unavailable ranges [ 1.530893] On node 0, zone Normal: 5120 pages in unavailable ranges [ 1.531254] ACPI: PM-Timer IO Port: 0x608 [ 1.531265] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 1.531292] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 1.531294] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 1.531296] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 1.531297] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 1.531298] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 1.531299] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 1.531301] ACPI: Using ACPI (MADT) for SMP configuration information [ 1.531302] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 1.531306] TSC deadline timer available [ 1.531310] CPU topo: Max. logical packages: 1 [ 1.531311] CPU topo: Max. logical dies: 1 [ 1.531311] CPU topo: Max. dies per package: 1 [ 1.531314] CPU topo: Max. threads per core: 1 [ 1.531315] CPU topo: Num. cores per package: 4 [ 1.531315] CPU topo: Num. threads per package: 4 [ 1.531316] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 1.531329] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 1.531344] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 1.531345] Booting paravirtualized kernel on KVM [ 1.531346] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 1.531352] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 1.568454] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 1.568481] Kernel command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 1.568535] random: crng init done [ 1.837210] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 1.878930] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.878965] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 1.914162] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 1.914167] software IO TLB: area num 4. [ 1.914169] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 1.960234] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 1.960348] ftrace: allocating 54089 entries in 212 pages [ 1.970850] ftrace: allocated 212 pages with 4 groups [ 1.971068] Dynamic Preempt: full [ 1.971523] rcu: Preemptible hierarchical RCU implementation. [ 1.971523] rcu: RCU event tracing is enabled. [ 1.971524] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 1.971525] All grace periods are expedited (rcu_expedited). [ 1.971525] Trampoline variant of Tasks RCU enabled. [ 1.971526] Rude variant of Tasks RCU enabled. [ 1.971526] Tracing variant of Tasks RCU enabled. [ 1.971527] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 1.971527] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 1.971546] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.971548] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 1.971549] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 2.032211] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 2.032442] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 2.032518] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 2.037451] Console: colour VGA+ 80x25 [ 2.037489] printk: legacy console [ttyS0] enabled [ 2.154946] ACPI: Core revision 20240827 [ 2.155993] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 2.158581] APIC: Switch to symmetric I/O mode setup [ 2.159518] x2apic enabled [ 2.160260] APIC: Switched APIC routing to: physical x2apic [ 2.162118] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 2.165659] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 2.167321] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 2.168462] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 2.169321] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 2.170323] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 2.171323] Spectre V2 : Mitigation: Retpolines [ 2.172321] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 2.173327] Speculative Store Bypass: Vulnerable [ 2.174350] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 2.175321] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 2.176321] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 2.177322] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 2.178321] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 2.200093] Freeing SMP alternatives memory: 56K [ 2.200326] pid_max: default: 32768 minimum: 301 [ 2.201339] LSM: initializing lsm=capability,landlock [ 2.202352] landlock: Up and running. [ 2.203339] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.204443] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.206535] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 2.207769] Performance Events: AMD PMU driver. [ 2.208326] ... version: 0 [ 2.208974] ... bit width: 48 [ 2.209323] ... generic registers: 4 [ 2.209991] ... value mask: 0000ffffffffffff [ 2.210323] ... max period: 00007fffffffffff [ 2.211183] ... fixed-purpose events: 0 [ 2.211323] ... event mask: 000000000000000f [ 2.212288] signal: max sigframe size: 1776 [ 2.212365] rcu: Hierarchical SRCU implementation. [ 2.213152] rcu: Max phase no-delay instances is 400. [ 2.213397] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.214586] smp: Bringing up secondary CPUs ... [ 2.215553] smpboot: x86: Booting SMP configuration: [ 2.216327] .... node #0, CPUs: #1 #2 #3 [ 2.255362] smp: Brought up 1 node, 4 CPUs [ 2.257201] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 2.257637] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 2.258451] devtmpfs: initialized [ 2.259557] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 2.260334] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.261534] pinctrl core: initialized pinctrl subsystem [ 2.264623] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.265431] thermal_sys: Registered thermal governor 'step_wise' [ 2.265432] thermal_sys: Registered thermal governor 'user_space' [ 2.266337] cpuidle: using governor menu [ 2.268146] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 2.268326] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 2.269331] PCI: Using configuration type 1 for base access [ 2.270364] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.309436] raid6: sse2x4 gen() 16192 MB/s [ 2.326620] raid6: sse2x2 gen() 28482 MB/s [ 2.343792] raid6: sse2x1 gen() 7519 MB/s [ 2.344326] raid6: using algorithm sse2x2 gen() 28482 MB/s [ 2.361543] raid6: .... xor() 16554 MB/s, rmw enabled [ 2.362324] raid6: using ssse3x2 recovery algorithm [ 2.363231] ACPI: Added _OSI(Module Device) [ 2.364325] ACPI: Added _OSI(Processor Device) [ 2.366324] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.367086] ACPI: Added _OSI(Processor Aggregator Device) [ 2.367790] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 2.370524] ACPI: Interpreter enabled [ 2.371352] ACPI: PM: (supports S0 S3 S5) [ 2.372333] ACPI: Using IOAPIC for interrupt routing [ 2.373417] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.374324] PCI: Using E820 reservations for host bridge windows [ 2.375384] ACPI: Enabled 2 GPEs in block 00 to 3F [ 2.377392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.378329] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.379355] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 2.380361] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 2.381399] PCI host bridge to bus 0000:00 [ 2.382100] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.382325] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.383324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.384323] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 2.385324] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 2.386326] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 2.387324] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.388258] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 2.388808] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.390325] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 2.392326] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 2.399326] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 2.401327] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 2.403864] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.405327] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 2.408027] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 2.411328] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 2.415890] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 2.417997] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 2.420329] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 2.423006] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 2.425331] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 2.426413] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.428856] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.431065] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 2.432340] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 2.438326] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 2.440958] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 2.442938] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 2.444088] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 2.445809] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 2.447668] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 2.451215] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 2.452100] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 2.452763] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 2.455185] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 2.455689] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 2.456531] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 2.460127] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 2.460845] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 2.462350] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 2.466053] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 2.467342] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 2.468370] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.469368] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 2.470368] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.471372] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 2.472366] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 2.473368] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 2.474367] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 2.475361] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 2.476329] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 2.477327] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 2.478340] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 2.479331] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 2.480333] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 2.481328] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 2.482330] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 2.483574] iommu: Default domain type: Translated [ 2.484325] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.485398] SCSI subsystem initialized [ 2.486338] ACPI: bus type USB registered [ 2.487065] usbcore: registered new interface driver usbfs [ 2.487331] usbcore: registered new interface driver hub [ 2.488267] usbcore: registered new device driver usb [ 2.488346] pps_core: LinuxPPS API ver. 1 registered [ 2.489198] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.489328] PTP clock support registered [ 2.490527] Bluetooth: Core ver 2.22 [ 2.491212] NET: Registered PF_BLUETOOTH protocol family [ 2.491325] Bluetooth: HCI device and connection manager initialized [ 2.492325] Bluetooth: HCI socket layer initialized [ 2.493217] Bluetooth: L2CAP socket layer initialized [ 2.493328] Bluetooth: SCO socket layer initialized [ 2.494345] PCI: Using ACPI for IRQ routing [ 2.544461] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 2.545321] pci 0000:00:03.0: vgaarb: bridge control possible [ 2.545321] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.545328] vgaarb: loaded [ 2.545869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.546324] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 2.551393] clocksource: Switched to clocksource kvm-clock [ 2.574184] pnp: PnP ACPI init [ 2.574916] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 2.576371] pnp: PnP ACPI: found 5 devices [ 2.583965] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.585545] NET: Registered PF_INET protocol family [ 2.603731] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.606198] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.607794] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.609184] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.610631] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 2.638931] TCP: Hash tables configured (established 65536 bind 65536) [ 2.650587] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.651977] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 2.653435] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.655085] RPC: Registered named UNIX socket transport module. [ 2.656199] RPC: Registered udp transport module. [ 2.657104] RPC: Registered tcp transport module. [ 2.657987] RPC: Registered tcp-with-tls transport module. [ 2.658975] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.660173] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.661322] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.662452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.663692] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 2.664994] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 2.666246] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 2.667755] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 2.669121] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 2.670400] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 2.671684] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 2.673100] PCI: CLS 0 bytes, default 64 [ 2.673884] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.675072] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 2.676664] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 2.680942] Initialise system trusted keyrings [ 2.682195] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.683680] NFS: Registering the id_resolver key type [ 2.684748] Key type id_resolver registered [ 2.685546] Key type id_legacy registered [ 2.686903] Key type cifs.idmap registered [ 2.694826] xor: automatically using best checksumming function avx [ 2.696122] Key type asymmetric registered [ 2.696890] Asymmetric key parser 'x509' registered [ 2.697920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.699564] io scheduler mq-deadline registered [ 2.700647] io scheduler kyber registered [ 2.701611] io scheduler bfq registered [ 2.702727] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.704998] ACPI: button: Power Button [PWRF] [ 2.707753] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 2.713125] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 2.717481] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 2.725222] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 2.727024] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.729940] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.733294] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.737517] Linux agpgart interface v0.103 [ 2.738281] ACPI: bus type drm_connector registered [ 2.739194] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 2.740502] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 2.743503] Console: switching to colour dummy device 80x25 [ 2.744615] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.744617] [drm] features: -context_init [ 2.746824] [drm] number of scanouts: 1 [ 2.747458] [drm] number of cap sets: 0 [ 2.748382] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.752930] fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.783645] Console: switching to colour frame buffer device 160x50 [ 2.795302] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.812302] brd: module loaded [ 2.836966] loop: module loaded [ 2.837672] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.839584] virtio_blk virtio3: [vda] 1040624 512-byte logical blocks (533 MB/508 MiB) [ 2.844256] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.847919] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.850294] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.852161] scsi host0: ahci [ 2.852928] scsi host1: ahci [ 2.853588] scsi host2: ahci [ 2.854478] scsi host3: ahci [ 2.855161] scsi host4: ahci [ 2.855890] scsi host5: ahci [ 2.856394] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.857790] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.859177] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.860568] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.861948] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.863313] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.865893] e100: Intel(R) PRO/100 Network Driver [ 2.866839] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.867831] e1000: Intel(R) PRO/1000 Network Driver [ 2.868736] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.869674] e1000e: Intel(R) PRO/1000 Network Driver [ 2.870577] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.871571] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.872474] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.874098] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.876028] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.877375] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.898628] hub 1-0:1.0: USB hub found [ 2.899307] hub 1-0:1.0: 2 ports detected [ 2.900611] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.902826] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.906330] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.913943] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.915070] hub 2-0:1.0: USB hub found [ 2.915683] hub 2-0:1.0: 6 ports detected [ 2.936976] hub 1-0:1.0: USB hub found [ 2.937607] hub 1-0:1.0: 2 ports detected [ 2.938470] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.940754] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.943999] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.946719] hub 3-0:1.0: USB hub found [ 2.947551] hub 3-0:1.0: 2 ports detected [ 2.949001] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.950128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.951782] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.953227] hub 4-0:1.0: USB hub found [ 2.954053] hub 4-0:1.0: 2 ports detected [ 2.956889] usbcore: registered new interface driver usb-storage [ 2.957944] usbcore: registered new interface driver usbserial_generic [ 2.958995] usbserial: USB Serial support registered for generic [ 2.959965] usbcore: registered new interface driver ftdi_sio [ 2.960922] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.962086] usbcore: registered new interface driver pl2303 [ 2.963005] usbserial: USB Serial support registered for pl2303 [ 2.963971] i8042: PNP: No PS/2 controller found. [ 2.964795] mousedev: PS/2 mouse device common for all mice [ 2.965948] rtc_cmos 00:03: RTC can wake from S4 [ 2.967164] rtc_cmos 00:03: registered as rtc0 [ 2.967958] rtc_cmos 00:03: setting system clock to 2025-06-28T01:13:50 UTC (1751073230) [ 2.969301] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.970766] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.970827] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.973074] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.974427] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.978906] sdhci: Secure Digital Host Controller Interface driver [ 2.981491] sdhci: Copyright(c) Pierre Ossman [ 2.983167] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.984174] usbcore: registered new interface driver usbhid [ 2.985183] usbhid: USB HID core driver [ 2.985867] u32 classifier [ 2.986322] input device check on [ 2.986963] Actions configured [ 2.987602] NET: Registered PF_INET6 protocol family [ 2.988846] Segment Routing with IPv6 [ 2.989480] In-situ OAM (IOAM) with IPv6 [ 2.990148] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.991276] NET: Registered PF_PACKET protocol family [ 2.992137] Bridge firewalling registered [ 2.992834] l2tp_core: L2TP core driver, V2.0 [ 2.993546] Key type dns_resolver registered [ 2.994351] NET: Registered PF_VSOCK protocol family [ 2.995675] IPI shorthand broadcast: enabled [ 2.997227] sched_clock: Marking stable (2866002099, 130873421)->(3120742635, -123867115) [ 2.998721] registered taskstats version 1 [ 2.999410] Loading compiled-in X.509 certificates [ 3.001121] Key type .fscrypt registered [ 3.001828] Key type fscrypt-provisioning registered [ 3.002861] Btrfs loaded, zoned=no, fsverity=no [ 3.004840] Key type encrypted registered [ 3.005629] printk: legacy console [netcon0] enabled [ 3.006479] netconsole: network logging started [ 3.156902] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.171192] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.173069] ata1: SATA link down (SStatus 0 SControl 300) [ 3.175201] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.177099] ata3.00: applying bridge limits [ 3.177953] ata2: SATA link down (SStatus 0 SControl 300) [ 3.179240] ata4: SATA link down (SStatus 0 SControl 300) [ 3.180329] ata3.00: configured for UDMA/100 [ 3.181253] ata6: SATA link down (SStatus 0 SControl 300) [ 3.182781] ata5: SATA link down (SStatus 0 SControl 300) [ 3.189450] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.218141] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.219488] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.241907] IP-Config: Complete: [ 3.243337] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 3.247536] host=192.168.7.18, domain=, nis-domain=(none) [ 3.249418] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.249419] nameserver0=8.8.8.8 [ 3.251323] clk: Disabling unused clocks [ 3.252312] md: Waiting for all devices to be available before autodetect [ 3.253351] md: If you don't use raid, use raid=noautodetect [ 3.254263] md: Autodetecting RAID arrays. [ 3.254832] md: autorun ... [ 3.255210] md: ... autorun DONE. [ 3.263467] EXT4-fs (vda): mounted filesystem d83f17d0-aefd-4048-95e1-c78571ce8c34 r/w with ordered data mode. Quota mode: disabled. [ 3.265132] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.265997] devtmpfs: mounted [ 3.267120] Freeing unused kernel image (initmem) memory: 3528K [ 3.267923] Write protecting the kernel read-only data: 26624k [ 3.268841] Freeing unused kernel image (rodata/data gap) memory: 284K [ 3.269702] Run /sbin/init as init process INIT: version 3.14 booting [ 3.289856] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 3.296761] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 3.308580] udevd[138]: starting version 3.2.14 [ 3.312812] udevd[139]: starting eudev-3.2.14 [ 3.410907] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 3.545201] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 3.602303] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 3.664857] EXT4-fs (vda): re-mounted d83f17d0-aefd-4048-95e1-c78571ce8c34. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-e4a79c9a60893e2ec36ea4634ee52a0704185a60 qemux86-64 /dev/ttyS0 qemux86-64 login: