[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1354302169 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.000 MHz processor [ 0.000886] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000915] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000917] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000960] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002811] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004091] ACPI: Early table checksum verification disabled [ 0.004093] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.004099] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004103] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004108] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004110] ACPI: FACS 0x000000007FFE0000 000040 [ 0.004111] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004112] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004114] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004115] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004117] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.004118] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.004118] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.004119] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.004119] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.004120] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.004120] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.004151] Zone ranges: [ 0.004151] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004152] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004153] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004154] Movable zone start for each node [ 0.004154] Early memory node ranges [ 0.004154] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004155] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.004156] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004157] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.005142] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005162] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.609728] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.609778] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.610143] ACPI: PM-Timer IO Port: 0x608 [ 0.610155] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.610183] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.610186] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.610187] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.610188] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.610189] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.610190] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.610192] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.610193] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.610197] TSC deadline timer available [ 0.610201] CPU topo: Max. logical packages: 1 [ 0.610201] CPU topo: Max. logical dies: 1 [ 0.610202] CPU topo: Max. dies per package: 1 [ 0.610205] CPU topo: Max. threads per core: 1 [ 0.610206] CPU topo: Num. cores per package: 4 [ 0.610206] CPU topo: Num. threads per package: 4 [ 0.610206] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.610220] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.610235] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.610236] Booting paravirtualized kernel on KVM [ 0.610238] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.610243] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.642978] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.643007] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.643062] random: crng init done [ 0.834211] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.863152] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.863188] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.864081] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.864085] software IO TLB: area num 4. [ 0.864086] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.869843] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.869860] ftrace: allocating 54089 entries in 212 pages [ 0.879410] ftrace: allocated 212 pages with 4 groups [ 0.879443] Dynamic Preempt: full [ 0.880886] rcu: Preemptible hierarchical RCU implementation. [ 0.880886] rcu: RCU event tracing is enabled. [ 0.880887] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.880888] All grace periods are expedited (rcu_expedited). [ 0.880889] Trampoline variant of Tasks RCU enabled. [ 0.880890] Rude variant of Tasks RCU enabled. [ 0.880890] Tracing variant of Tasks RCU enabled. [ 0.880890] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.880891] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.880896] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.880897] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.880899] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.886754] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.886940] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.887008] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.891391] Console: colour VGA+ 80x25 [ 0.891428] printk: legacy console [ttyS0] enabled [ 1.011138] ACPI: Core revision 20240827 [ 1.011855] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.013388] APIC: Switch to symmetric I/O mode setup [ 1.014320] x2apic enabled [ 1.015029] APIC: Switched APIC routing to: physical x2apic [ 1.016843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.017860] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.019555] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 1.020673] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.021555] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.022558] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.023557] Spectre V2 : Mitigation: Retpolines [ 1.024555] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 1.025555] Speculative Store Bypass: Vulnerable [ 1.026567] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.027555] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.028556] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.029556] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.030555] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.050541] Freeing SMP alternatives memory: 56K [ 1.050558] pid_max: default: 32768 minimum: 301 [ 1.051571] LSM: initializing lsm=capability,landlock [ 1.052582] landlock: Up and running. [ 1.053576] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.054559] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.055746] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.056672] Performance Events: AMD PMU driver. [ 1.057434] ... version: 0 [ 1.057558] ... bit width: 48 [ 1.058245] ... generic registers: 4 [ 1.058557] ... value mask: 0000ffffffffffff [ 1.059437] ... max period: 00007fffffffffff [ 1.059558] ... fixed-purpose events: 0 [ 1.060237] ... event mask: 000000000000000f [ 1.060629] signal: max sigframe size: 1776 [ 1.061329] rcu: Hierarchical SRCU implementation. [ 1.061558] rcu: Max phase no-delay instances is 400. [ 1.062585] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.063690] smp: Bringing up secondary CPUs ... [ 1.064491] smpboot: x86: Booting SMP configuration: [ 1.064560] .... node #0, CPUs: #1 #2 #3 [ 1.100605] smp: Brought up 1 node, 4 CPUs [ 1.102242] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 1.102752] Memory: 5081580K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 1.103626] devtmpfs: initialized [ 1.104240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.104560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.106591] pinctrl core: initialized pinctrl subsystem [ 1.107770] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.108642] thermal_sys: Registered thermal governor 'step_wise' [ 1.108643] thermal_sys: Registered thermal governor 'user_space' [ 1.109566] cpuidle: using governor menu [ 1.111352] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.111559] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.112564] PCI: Using configuration type 1 for base access [ 1.113508] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.177491] raid6: sse2x4 gen() 24048 MB/s [ 1.193976] raid6: sse2x2 gen() 25946 MB/s [ 1.210996] raid6: sse2x1 gen() 8110 MB/s [ 1.211558] raid6: using algorithm sse2x2 gen() 25946 MB/s [ 1.228985] raid6: .... xor() 19168 MB/s, rmw enabled [ 1.229559] raid6: using ssse3x2 recovery algorithm [ 1.230425] ACPI: Added _OSI(Module Device) [ 1.231558] ACPI: Added _OSI(Processor Device) [ 1.232287] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.232557] ACPI: Added _OSI(Processor Aggregator Device) [ 1.233860] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.236724] ACPI: Interpreter enabled [ 1.237577] ACPI: PM: (supports S0 S3 S5) [ 1.238562] ACPI: Using IOAPIC for interrupt routing [ 1.239592] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.240558] PCI: Using E820 reservations for host bridge windows [ 1.241596] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.243326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.243561] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.244579] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.245583] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.246595] PCI host bridge to bus 0000:00 [ 1.247258] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.247558] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.248557] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.249557] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.250557] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.251558] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.252558] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.253482] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.253988] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.255558] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.257558] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.261559] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.264558] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.266080] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.267375] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.268559] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.273565] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.276081] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.277944] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.280038] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.281559] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.285567] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.286667] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.288156] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.289564] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.291560] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.297422] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.299707] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.302030] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.303155] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.304683] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.306632] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.310353] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.311941] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.312856] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.316210] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.316949] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.318259] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.322162] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.322991] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.324329] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.325766] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.327375] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.327618] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.328616] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.329618] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.330617] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.331614] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.332611] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.333610] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.334593] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.335570] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.336568] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.337568] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.338569] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.339568] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.340568] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.341568] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.342780] iommu: Default domain type: Translated [ 1.343560] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.344613] SCSI subsystem initialized [ 1.345428] ACPI: bus type USB registered [ 1.345577] usbcore: registered new interface driver usbfs [ 1.346566] usbcore: registered new interface driver hub [ 1.347567] usbcore: registered new device driver usb [ 1.348575] pps_core: LinuxPPS API ver. 1 registered [ 1.349560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.350565] PTP clock support registered [ 1.351623] Bluetooth: Core ver 2.22 [ 1.352413] NET: Registered PF_BLUETOOTH protocol family [ 1.352560] Bluetooth: HCI device and connection manager initialized [ 1.353562] Bluetooth: HCI socket layer initialized [ 1.354560] Bluetooth: L2CAP socket layer initialized [ 1.355563] Bluetooth: SCO socket layer initialized [ 1.356584] PCI: Using ACPI for IRQ routing [ 1.418851] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.419555] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.419555] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.419565] vgaarb: loaded [ 1.420174] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.420557] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.424633] clocksource: Switched to clocksource kvm-clock [ 1.488377] pnp: PnP ACPI init [ 1.489028] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.490370] pnp: PnP ACPI: found 5 devices [ 1.497341] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.498743] NET: Registered PF_INET protocol family [ 1.524151] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.526376] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.527714] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.528935] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.530190] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.561598] TCP: Hash tables configured (established 65536 bind 65536) [ 1.563642] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.564786] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.566032] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.567263] RPC: Registered named UNIX socket transport module. [ 1.568260] RPC: Registered udp transport module. [ 1.569662] RPC: Registered tcp transport module. [ 1.572271] RPC: Registered tcp-with-tls transport module. [ 1.575292] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.577285] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.578639] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.581142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.583985] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.586793] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.589584] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.591410] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.593559] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.594747] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.595908] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.597153] PCI: CLS 0 bytes, default 64 [ 1.597825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.598848] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.600091] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.602694] Initialise system trusted keyrings [ 1.603446] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.604836] NFS: Registering the id_resolver key type [ 1.605938] Key type id_resolver registered [ 1.606848] Key type id_legacy registered [ 1.608201] Key type cifs.idmap registered [ 1.616240] xor: automatically using best checksumming function avx [ 1.617779] Key type asymmetric registered [ 1.618663] Asymmetric key parser 'x509' registered [ 1.619736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.621325] io scheduler mq-deadline registered [ 1.622342] io scheduler kyber registered [ 1.624020] io scheduler bfq registered [ 1.625075] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.627671] ACPI: button: Power Button [PWRF] [ 1.628793] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.631076] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.633924] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.639869] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.641471] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.642578] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.748018] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.753682] Linux agpgart interface v0.103 [ 1.754472] ACPI: bus type drm_connector registered [ 1.755385] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.756339] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.759590] Console: switching to colour dummy device 80x25 [ 1.760908] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.760909] [drm] features: -context_init [ 1.763701] [drm] number of scanouts: 1 [ 1.764537] [drm] number of cap sets: 0 [ 1.765588] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.906077] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.938883] Console: switching to colour frame buffer device 160x50 [ 1.957078] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.001558] brd: module loaded [ 2.002696] loop: module loaded [ 2.003356] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 2.005195] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 2.008122] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 2.009422] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 2.010425] ahci 0000:00:1f.2: flags: 64bit ncq only [ 2.033329] scsi host0: ahci [ 2.033976] scsi host1: ahci [ 2.034555] scsi host2: ahci [ 2.035165] scsi host3: ahci [ 2.035737] scsi host4: ahci [ 2.036329] scsi host5: ahci [ 2.036804] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 2.038081] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 2.039370] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 2.040647] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 2.041969] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 2.043251] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 2.045750] e100: Intel(R) PRO/100 Network Driver [ 2.046715] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.047893] e1000: Intel(R) PRO/1000 Network Driver [ 2.048934] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.050173] e1000e: Intel(R) PRO/1000 Network Driver [ 2.051222] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.052467] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.053606] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.055357] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.057376] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.059040] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.088970] hub 1-0:1.0: USB hub found [ 2.089799] hub 1-0:1.0: 2 ports detected [ 2.090909] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.092313] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.094071] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 2.100642] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.102047] hub 2-0:1.0: USB hub found [ 2.102877] hub 2-0:1.0: 6 ports detected [ 2.124736] hub 1-0:1.0: USB hub found [ 2.125526] hub 1-0:1.0: 2 ports detected [ 2.126511] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.128756] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.131010] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.132180] hub 3-0:1.0: USB hub found [ 2.132823] hub 3-0:1.0: 2 ports detected [ 2.134094] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.134933] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.136184] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.137288] hub 4-0:1.0: USB hub found [ 2.137910] hub 4-0:1.0: 2 ports detected [ 2.138644] usbcore: registered new interface driver usb-storage [ 2.139598] usbcore: registered new interface driver usbserial_generic [ 2.140632] usbserial: USB Serial support registered for generic [ 2.141577] usbcore: registered new interface driver ftdi_sio [ 2.142555] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.143705] usbcore: registered new interface driver pl2303 [ 2.144579] usbserial: USB Serial support registered for pl2303 [ 2.145584] i8042: PNP: No PS/2 controller found. [ 2.146416] mousedev: PS/2 mouse device common for all mice [ 2.147504] rtc_cmos 00:03: RTC can wake from S4 [ 2.149005] rtc_cmos 00:03: registered as rtc0 [ 2.149920] rtc_cmos 00:03: setting system clock to 2025-06-28T01:13:49 UTC (1751073229) [ 2.151206] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.152536] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.152566] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.153517] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.154890] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.158322] sdhci: Secure Digital Host Controller Interface driver [ 2.160927] sdhci: Copyright(c) Pierre Ossman [ 2.162547] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.163579] usbcore: registered new interface driver usbhid [ 2.164574] usbhid: USB HID core driver [ 2.165245] u32 classifier [ 2.165698] input device check on [ 2.166372] Actions configured [ 2.167021] NET: Registered PF_INET6 protocol family [ 2.168093] Segment Routing with IPv6 [ 2.168720] In-situ OAM (IOAM) with IPv6 [ 2.169419] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.170488] NET: Registered PF_PACKET protocol family [ 2.172243] Bridge firewalling registered [ 2.174042] l2tp_core: L2TP core driver, V2.0 [ 2.174953] Key type dns_resolver registered [ 2.175740] NET: Registered PF_VSOCK protocol family [ 2.176861] IPI shorthand broadcast: enabled [ 2.178362] sched_clock: Marking stable (2049001883, 128609282)->(2301194063, -123582898) [ 2.179777] registered taskstats version 1 [ 2.180494] Loading compiled-in X.509 certificates [ 2.196744] Key type .fscrypt registered [ 2.197414] Key type fscrypt-provisioning registered [ 2.235419] Btrfs loaded, zoned=no, fsverity=no [ 2.237205] Key type encrypted registered [ 2.238051] printk: legacy console [netcon0] enabled [ 2.238956] netconsole: network logging started [ 2.346639] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.349827] ata2: SATA link down (SStatus 0 SControl 300) [ 2.352791] ata1: SATA link down (SStatus 0 SControl 300) [ 2.360519] ata4: SATA link down (SStatus 0 SControl 300) [ 2.361573] ata5: SATA link down (SStatus 0 SControl 300) [ 2.362641] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.363771] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.364717] ata3.00: applying bridge limits [ 2.365476] ata3.00: configured for UDMA/100 [ 2.366387] ata6: SATA link down (SStatus 0 SControl 300) [ 2.366539] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.385907] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.388735] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.407639] IP-Config: Complete: [ 2.408848] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 2.410861] host=192.168.7.8, domain=, nis-domain=(none) [ 2.411866] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.411867] nameserver0=8.8.8.8 [ 2.413735] clk: Disabling unused clocks [ 2.415019] md: Waiting for all devices to be available before autodetect [ 2.417315] md: If you don't use raid, use raid=noautodetect [ 2.419243] md: Autodetecting RAID arrays. [ 2.420430] md: autorun ... [ 2.420836] md: ... autorun DONE. [ 2.426047] EXT4-fs (vda): mounted filesystem 31c39ecf-1fd5-43ab-9e93-7ca497d486e3 r/w with ordered data mode. Quota mode: disabled. [ 2.427658] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.428562] devtmpfs: mounted [ 2.429678] Freeing unused kernel image (initmem) memory: 3528K [ 2.430553] Write protecting the kernel read-only data: 26624k [ 2.431560] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.432509] Run /sbin/init as init process INIT: version 3.14 booting [ 2.482523] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.485317] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 2.542802] udevd[140]: starting version 3.2.14 [ 2.549835] udevd[141]: starting eudev-3.2.14 [ 2.598652] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.743380] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.797395] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.861652] EXT4-fs (vda): re-mounted 31c39ecf-1fd5-43ab-9e93-7ca497d486e3. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-e4a79c9a60893e2ec36ea4634ee52a0704185a60 qemux86-64 /dev/ttyS0 qemux86-64 login: