[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 2252912494 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2750.000 MHz processor [ 0.000891] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000920] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000922] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000967] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002800] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.002943] ACPI: Early table checksum verification disabled [ 0.002945] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.002950] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002954] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002958] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002960] ACPI: FACS 0x000000007FFE0000 000040 [ 0.002961] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002963] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002964] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002966] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.002967] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.002968] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.002969] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.002969] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.002969] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.002970] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.002970] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.004034] Zone ranges: [ 0.004035] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004036] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004037] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004038] Movable zone start for each node [ 0.004038] Early memory node ranges [ 0.004039] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004040] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.004041] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004042] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.023089] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.023117] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.686431] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.686481] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.686834] ACPI: PM-Timer IO Port: 0x608 [ 0.686845] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.686874] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.686876] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.686878] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.686879] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.686879] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.686880] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.686882] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.686883] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.686887] TSC deadline timer available [ 0.686891] CPU topo: Max. logical packages: 1 [ 0.686892] CPU topo: Max. logical dies: 1 [ 0.686892] CPU topo: Max. dies per package: 1 [ 0.686895] CPU topo: Max. threads per core: 1 [ 0.686896] CPU topo: Num. cores per package: 4 [ 0.686896] CPU topo: Num. threads per package: 4 [ 0.686897] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.686911] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.686926] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.686927] Booting paravirtualized kernel on KVM [ 0.686929] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.686933] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.698481] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.698511] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.698566] random: crng init done [ 0.800020] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.833293] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.833342] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.833427] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.833431] software IO TLB: area num 4. [ 0.833432] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.847419] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.847440] ftrace: allocating 54089 entries in 212 pages [ 0.857105] ftrace: allocated 212 pages with 4 groups [ 0.857140] Dynamic Preempt: full [ 0.877918] rcu: Preemptible hierarchical RCU implementation. [ 0.877919] rcu: RCU event tracing is enabled. [ 0.877920] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.877922] All grace periods are expedited (rcu_expedited). [ 0.877922] Trampoline variant of Tasks RCU enabled. [ 0.877922] Rude variant of Tasks RCU enabled. [ 0.877922] Tracing variant of Tasks RCU enabled. [ 0.877923] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.877924] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.877929] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.877930] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.877931] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.963380] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.963572] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.963642] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.967887] Console: colour VGA+ 80x25 [ 0.967921] printk: legacy console [ttyS0] enabled [ 1.093023] ACPI: Core revision 20240827 [ 1.093731] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.095221] APIC: Switch to symmetric I/O mode setup [ 1.096241] x2apic enabled [ 1.096923] APIC: Switched APIC routing to: physical x2apic [ 1.098763] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.099775] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.101551] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 1.102668] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.103554] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.104554] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.105554] Spectre V2 : Mitigation: Retpolines [ 1.106333] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 1.106552] Speculative Store Bypass: Vulnerable [ 1.107563] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.108551] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.109551] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.110553] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.111551] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.131198] Freeing SMP alternatives memory: 56K [ 1.131553] pid_max: default: 32768 minimum: 301 [ 1.132565] LSM: initializing lsm=capability,landlock [ 1.133578] landlock: Up and running. [ 1.134227] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.134556] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.135750] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.136677] Performance Events: AMD PMU driver. [ 1.137455] ... version: 0 [ 1.137554] ... bit width: 48 [ 1.138254] ... generic registers: 4 [ 1.138553] ... value mask: 0000ffffffffffff [ 1.139430] ... max period: 00007fffffffffff [ 1.139553] ... fixed-purpose events: 0 [ 1.140193] ... event mask: 000000000000000f [ 1.140658] signal: max sigframe size: 1776 [ 1.141368] rcu: Hierarchical SRCU implementation. [ 1.141554] rcu: Max phase no-delay instances is 400. [ 1.142430] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.142688] smp: Bringing up secondary CPUs ... [ 1.143480] smpboot: x86: Booting SMP configuration: [ 1.143557] .... node #0, CPUs: #1 #2 #3 [ 1.181554] smp: Brought up 1 node, 4 CPUs [ 1.182557] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 1.183777] Memory: 5081588K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134048K reserved, 0K cma-reserved) [ 1.184618] devtmpfs: initialized [ 1.185279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.185560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.187364] pinctrl core: initialized pinctrl subsystem [ 1.187793] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.188636] thermal_sys: Registered thermal governor 'step_wise' [ 1.188637] thermal_sys: Registered thermal governor 'user_space' [ 1.189564] cpuidle: using governor menu [ 1.191327] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.191556] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.192561] PCI: Using configuration type 1 for base access [ 1.193559] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.212555] raid6: sse2x4 gen() 22932 MB/s [ 1.229554] raid6: sse2x2 gen() 25457 MB/s [ 1.246555] raid6: sse2x1 gen() 8154 MB/s [ 1.247288] raid6: using algorithm sse2x2 gen() 25457 MB/s [ 1.264553] raid6: .... xor() 18897 MB/s, rmw enabled [ 1.265381] raid6: using ssse3x2 recovery algorithm [ 1.265636] ACPI: Added _OSI(Module Device) [ 1.266318] ACPI: Added _OSI(Processor Device) [ 1.266554] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.267306] ACPI: Added _OSI(Processor Aggregator Device) [ 1.267954] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.269615] ACPI: Interpreter enabled [ 1.270223] ACPI: PM: (supports S0 S3 S5) [ 1.270554] ACPI: Using IOAPIC for interrupt routing [ 1.271377] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.271554] PCI: Using E820 reservations for host bridge windows [ 1.272598] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.274350] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.274559] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.275575] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.276579] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.277596] PCI host bridge to bus 0000:00 [ 1.278276] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.278554] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.279553] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.280554] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.281553] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.282554] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.283553] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.284473] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.284971] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.286555] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.288276] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.291520] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.292554] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.294074] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.295251] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.296331] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.299554] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.302361] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.304133] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.306075] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.307447] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.308967] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.309595] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.311042] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.312994] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.314954] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.317554] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.320047] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.322640] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.324113] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.325812] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.327136] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.328740] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.330145] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.331169] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.333002] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.333906] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.334728] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.337497] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.337977] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.339174] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.340554] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.342000] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.342600] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.343595] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.344595] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.345594] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.346606] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.347597] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.348592] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.349576] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.350557] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.351527] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.351557] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.352537] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.352557] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.353534] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.353556] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.354717] iommu: Default domain type: Translated [ 1.355521] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.355594] SCSI subsystem initialized [ 1.356238] ACPI: bus type USB registered [ 1.356564] usbcore: registered new interface driver usbfs [ 1.357466] usbcore: registered new interface driver hub [ 1.357556] usbcore: registered new device driver usb [ 1.358394] pps_core: LinuxPPS API ver. 1 registered [ 1.358554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.359554] PTP clock support registered [ 1.360191] Bluetooth: Core ver 2.22 [ 1.360558] NET: Registered PF_BLUETOOTH protocol family [ 1.361445] Bluetooth: HCI device and connection manager initialized [ 1.361554] Bluetooth: HCI socket layer initialized [ 1.362342] Bluetooth: L2CAP socket layer initialized [ 1.362558] Bluetooth: SCO socket layer initialized [ 1.363353] PCI: Using ACPI for IRQ routing [ 1.411117] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.411550] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.411550] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.411556] vgaarb: loaded [ 1.412035] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.412554] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.415605] clocksource: Switched to clocksource kvm-clock [ 1.416568] pnp: PnP ACPI init [ 1.417188] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.418492] pnp: PnP ACPI: found 5 devices [ 1.462533] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.467524] NET: Registered PF_INET protocol family [ 1.498421] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.500964] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.502552] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.503921] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.505354] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.507512] TCP: Hash tables configured (established 65536 bind 65536) [ 1.508723] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.509954] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.537658] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.539073] RPC: Registered named UNIX socket transport module. [ 1.540133] RPC: Registered udp transport module. [ 1.540965] RPC: Registered tcp transport module. [ 1.541830] RPC: Registered tcp-with-tls transport module. [ 1.542802] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.543957] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.545072] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.546203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.547418] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.548661] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.549911] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.551368] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.552660] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.554914] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.556209] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.557577] PCI: CLS 0 bytes, default 64 [ 1.558316] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.559421] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.560799] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.563360] Initialise system trusted keyrings [ 1.564254] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.565540] NFS: Registering the id_resolver key type [ 1.566427] Key type id_resolver registered [ 1.567152] Key type id_legacy registered [ 1.568246] Key type cifs.idmap registered [ 1.576109] xor: automatically using best checksumming function avx [ 1.577344] Key type asymmetric registered [ 1.578051] Asymmetric key parser 'x509' registered [ 1.578890] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.580160] io scheduler mq-deadline registered [ 1.580935] io scheduler kyber registered [ 1.581659] io scheduler bfq registered [ 1.582591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.587001] ACPI: button: Power Button [PWRF] [ 1.588353] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.590102] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.591800] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.598018] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.600926] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.603342] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.606102] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.609451] Linux agpgart interface v0.103 [ 1.610262] ACPI: bus type drm_connector registered [ 1.611211] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.612201] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.616458] Console: switching to colour dummy device 80x25 [ 1.647178] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.647182] [drm] features: -context_init [ 1.649569] [drm] number of scanouts: 1 [ 1.650280] [drm] number of cap sets: 0 [ 1.651955] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.697781] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.732668] Console: switching to colour frame buffer device 160x50 [ 1.753464] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.779574] brd: module loaded [ 1.781546] loop: module loaded [ 1.782372] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.784461] virtio_blk virtio3: [vda] 1040624 512-byte logical blocks (533 MB/508 MiB) [ 1.788327] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.791515] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.794046] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.806480] scsi host0: ahci [ 1.807143] scsi host1: ahci [ 1.807751] scsi host2: ahci [ 1.808346] scsi host3: ahci [ 1.808922] scsi host4: ahci [ 1.809498] scsi host5: ahci [ 1.809969] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.811251] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.812507] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.813804] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.815069] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.816384] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.818694] e100: Intel(R) PRO/100 Network Driver [ 1.819539] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.820409] e1000: Intel(R) PRO/1000 Network Driver [ 1.821181] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.822121] e1000e: Intel(R) PRO/1000 Network Driver [ 1.822916] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.823838] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.824684] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.826106] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.827842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.829060] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.837553] hub 1-0:1.0: USB hub found [ 1.838162] hub 1-0:1.0: 2 ports detected [ 1.839307] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.841567] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.845094] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.852022] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.853377] hub 2-0:1.0: USB hub found [ 1.854080] hub 2-0:1.0: 6 ports detected [ 1.875093] hub 1-0:1.0: USB hub found [ 1.875868] hub 1-0:1.0: 2 ports detected [ 1.876864] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.879811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.882913] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.888252] hub 3-0:1.0: USB hub found [ 1.889177] hub 3-0:1.0: 2 ports detected [ 1.890528] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.891407] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.892732] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.893967] hub 4-0:1.0: USB hub found [ 1.894701] hub 4-0:1.0: 2 ports detected [ 1.895559] usbcore: registered new interface driver usb-storage [ 1.896762] usbcore: registered new interface driver usbserial_generic [ 1.898217] usbserial: USB Serial support registered for generic [ 1.899419] usbcore: registered new interface driver ftdi_sio [ 1.900455] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.901794] usbcore: registered new interface driver pl2303 [ 1.902813] usbserial: USB Serial support registered for pl2303 [ 1.903894] i8042: PNP: No PS/2 controller found. [ 1.904794] mousedev: PS/2 mouse device common for all mice [ 1.905982] rtc_cmos 00:03: RTC can wake from S4 [ 1.908992] rtc_cmos 00:03: registered as rtc0 [ 1.909863] rtc_cmos 00:03: setting system clock to 2025-06-29T11:54:39 UTC (1751198079) [ 1.911346] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.913013] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.913096] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.914178] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.916215] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.918614] sdhci: Secure Digital Host Controller Interface driver [ 1.919734] sdhci: Copyright(c) Pierre Ossman [ 1.920525] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.921627] usbcore: registered new interface driver usbhid [ 1.922637] usbhid: USB HID core driver [ 1.923341] u32 classifier [ 1.923829] input device check on [ 1.924538] Actions configured [ 1.925218] NET: Registered PF_INET6 protocol family [ 1.926738] Segment Routing with IPv6 [ 1.927583] In-situ OAM (IOAM) with IPv6 [ 1.928492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.929948] NET: Registered PF_PACKET protocol family [ 1.931094] Bridge firewalling registered [ 1.932013] l2tp_core: L2TP core driver, V2.0 [ 1.933037] Key type dns_resolver registered [ 1.934082] NET: Registered PF_VSOCK protocol family [ 1.935510] IPI shorthand broadcast: enabled [ 1.937130] sched_clock: Marking stable (1803003831, 133973340)->(2027568463, -90591292) [ 1.938770] registered taskstats version 1 [ 1.939561] Loading compiled-in X.509 certificates [ 1.941189] Key type .fscrypt registered [ 1.941913] Key type fscrypt-provisioning registered [ 1.943818] Btrfs loaded, zoned=no, fsverity=no [ 1.945453] Key type encrypted registered [ 1.946389] printk: legacy console [netcon0] enabled [ 1.947308] netconsole: network logging started [ 2.089043] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.127127] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.129958] ata5: SATA link down (SStatus 0 SControl 300) [ 2.131317] ata6: SATA link down (SStatus 0 SControl 300) [ 2.133144] ata1: SATA link down (SStatus 0 SControl 300) [ 2.134832] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.135902] ata3.00: applying bridge limits [ 2.136782] ata2: SATA link down (SStatus 0 SControl 300) [ 2.137899] ata4: SATA link down (SStatus 0 SControl 300) [ 2.139604] ata3.00: configured for UDMA/100 [ 2.140627] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.164249] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.167754] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.190994] IP-Config: Complete: [ 2.192368] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 2.196455] host=192.168.7.16, domain=, nis-domain=(none) [ 2.197989] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.197990] nameserver0=8.8.8.8 [ 2.199941] clk: Disabling unused clocks [ 2.200889] md: Waiting for all devices to be available before autodetect [ 2.201801] md: If you don't use raid, use raid=noautodetect [ 2.202536] md: Autodetecting RAID arrays. [ 2.203145] md: autorun ... [ 2.203510] md: ... autorun DONE. [ 2.211078] EXT4-fs (vda): mounted filesystem 33a2c3b4-e8bc-4edb-92a7-e04372695bf3 r/w with ordered data mode. Quota mode: disabled. [ 2.212642] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.213495] devtmpfs: mounted [ 2.214510] Freeing unused kernel image (initmem) memory: 3528K [ 2.215294] Write protecting the kernel read-only data: 26624k [ 2.216280] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.217144] Run /sbin/init as init process INIT: version 3.14 booting [ 2.224763] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 2.226981] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 2.259311] udevd[138]: starting version 3.2.14 [ 2.265952] udevd[140]: starting eudev-3.2.14 [ 2.339998] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.473707] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.527412] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.589162] EXT4-fs (vda): re-mounted 33a2c3b4-e8bc-4edb-92a7-e04372695bf3. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-7958ffebf102a0899867f035ea3b32e792250344 qemux86-64 /dev/ttyS0 qemux86-64 login: