[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1176467232 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2749.998 MHz processor [ 0.000906] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000945] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000948] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001007] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002858] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004064] ACPI: Early table checksum verification disabled [ 0.004068] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.004074] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004079] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004082] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004085] ACPI: FACS 0x000000007FFE0000 000040 [ 0.004086] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004088] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004089] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004090] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004092] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.004093] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.004093] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.004094] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.004094] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.004095] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.004095] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.004135] Zone ranges: [ 0.004135] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004136] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.004137] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004138] Movable zone start for each node [ 0.004139] Early memory node ranges [ 0.004139] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004140] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.004141] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.004142] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.005289] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005310] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.123962] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.124012] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.124434] ACPI: PM-Timer IO Port: 0x608 [ 0.124447] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.124477] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.124479] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.124481] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.124482] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.124483] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.124484] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.124486] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.124487] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.124490] TSC deadline timer available [ 0.124494] CPU topo: Max. logical packages: 1 [ 0.124495] CPU topo: Max. logical dies: 1 [ 0.124495] CPU topo: Max. dies per package: 1 [ 0.124499] CPU topo: Max. threads per core: 1 [ 0.124499] CPU topo: Num. cores per package: 4 [ 0.124500] CPU topo: Num. threads per package: 4 [ 0.124500] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.124515] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.124534] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.124536] Booting paravirtualized kernel on KVM [ 0.124537] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.124543] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.125546] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.125571] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.125624] random: crng init done [ 0.130133] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.132150] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.132182] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.133225] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.133228] software IO TLB: area num 4. [ 0.133229] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.138359] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.138378] ftrace: allocating 54089 entries in 212 pages [ 0.148367] ftrace: allocated 212 pages with 4 groups [ 0.148407] Dynamic Preempt: full [ 0.149426] rcu: Preemptible hierarchical RCU implementation. [ 0.149427] rcu: RCU event tracing is enabled. [ 0.149427] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.149429] All grace periods are expedited (rcu_expedited). [ 0.149430] Trampoline variant of Tasks RCU enabled. [ 0.149430] Rude variant of Tasks RCU enabled. [ 0.149430] Tracing variant of Tasks RCU enabled. [ 0.149431] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.149431] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.149436] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.149438] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.149439] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.170266] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.170472] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.170545] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.175744] Console: colour VGA+ 80x25 [ 0.175784] printk: legacy console [ttyS0] enabled [ 0.304412] ACPI: Core revision 20240827 [ 0.305408] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.307420] APIC: Switch to symmetric I/O mode setup [ 0.308754] x2apic enabled [ 0.309700] APIC: Switched APIC routing to: physical x2apic [ 0.312226] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.313521] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.315698] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.317824] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.318700] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.319702] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.320701] Spectre V2 : Mitigation: Retpolines [ 0.321384] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.321701] Speculative Store Bypass: Vulnerable [ 0.322713] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.323698] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.324698] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.325698] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.326698] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.346761] Freeing SMP alternatives memory: 56K [ 0.347456] pid_max: default: 32768 minimum: 301 [ 0.347712] LSM: initializing lsm=capability,landlock [ 0.348724] landlock: Up and running. [ 0.349306] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.349702] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.350930] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.351871] Performance Events: AMD PMU driver. [ 0.352704] ... version: 0 [ 0.353491] ... bit width: 48 [ 0.353701] ... generic registers: 4 [ 0.354510] ... value mask: 0000ffffffffffff [ 0.354702] ... max period: 00007fffffffffff [ 0.355703] ... fixed-purpose events: 0 [ 0.356411] ... event mask: 000000000000000f [ 0.356754] signal: max sigframe size: 1776 [ 0.357435] rcu: Hierarchical SRCU implementation. [ 0.357701] rcu: Max phase no-delay instances is 400. [ 0.358509] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.358825] smp: Bringing up secondary CPUs ... [ 0.359579] smpboot: x86: Booting SMP configuration: [ 0.359703] .... node #0, CPUs: #1 #2 #3 [ 0.399773] smp: Brought up 1 node, 4 CPUs [ 0.401359] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.402064] Memory: 5081576K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134060K reserved, 0K cma-reserved) [ 0.402772] devtmpfs: initialized [ 0.403321] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.403703] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.404899] pinctrl core: initialized pinctrl subsystem [ 0.405907] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.406781] thermal_sys: Registered thermal governor 'step_wise' [ 0.406783] thermal_sys: Registered thermal governor 'user_space' [ 0.407708] cpuidle: using governor menu [ 0.408835] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.409703] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.410707] PCI: Using configuration type 1 for base access [ 0.411596] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.431502] raid6: sse2x4 gen() 20790 MB/s [ 0.448072] raid6: sse2x2 gen() 24678 MB/s [ 0.465139] raid6: sse2x1 gen() 8283 MB/s [ 0.466710] raid6: using algorithm sse2x2 gen() 24678 MB/s [ 0.485687] raid6: .... xor() 18292 MB/s, rmw enabled [ 0.485702] raid6: using ssse3x2 recovery algorithm [ 0.486509] ACPI: Added _OSI(Module Device) [ 0.487702] ACPI: Added _OSI(Processor Device) [ 0.488389] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.488700] ACPI: Added _OSI(Processor Aggregator Device) [ 0.489943] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.492822] ACPI: Interpreter enabled [ 0.493725] ACPI: PM: (supports S0 S3 S5) [ 0.494704] ACPI: Using IOAPIC for interrupt routing [ 0.495737] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.496704] PCI: Using E820 reservations for host bridge windows [ 0.497750] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.499541] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.499704] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.500724] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.501727] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.502737] PCI host bridge to bus 0000:00 [ 0.503401] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.503703] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.504701] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.505701] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.506700] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.507700] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.508701] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.509647] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.510790] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.513670] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.515707] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.521706] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.524538] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.525352] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.526701] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.528145] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.531702] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.534200] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.536244] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.538702] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.540651] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.542649] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.542752] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.544247] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.546560] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.547702] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.551702] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.554320] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.556114] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.557470] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.560702] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.562285] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.564116] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.566117] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.567367] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.570723] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.572086] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.572890] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.575941] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.577171] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.578498] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.582158] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.584165] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.584803] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.585803] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.586846] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.587756] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.588747] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.589797] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.590757] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.591725] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.592707] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.593715] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.594731] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.595717] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.596717] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.597705] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.598693] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.599802] iommu: Default domain type: Translated [ 0.600647] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.600751] SCSI subsystem initialized [ 0.601391] ACPI: bus type USB registered [ 0.601711] usbcore: registered new interface driver usbfs [ 0.602619] usbcore: registered new interface driver hub [ 0.602706] usbcore: registered new device driver usb [ 0.603527] pps_core: LinuxPPS API ver. 1 registered [ 0.603701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.604703] PTP clock support registered [ 0.605912] Bluetooth: Core ver 2.22 [ 0.606721] NET: Registered PF_BLUETOOTH protocol family [ 0.607704] Bluetooth: HCI device and connection manager initialized [ 0.608706] Bluetooth: HCI socket layer initialized [ 0.609704] Bluetooth: L2CAP socket layer initialized [ 0.610672] Bluetooth: SCO socket layer initialized [ 0.610742] PCI: Using ACPI for IRQ routing [ 0.671806] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.672697] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.672697] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.672707] vgaarb: loaded [ 0.673201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.673702] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.677764] clocksource: Switched to clocksource kvm-clock [ 0.678712] pnp: PnP ACPI init [ 0.679325] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.680667] pnp: PnP ACPI: found 5 devices [ 0.688336] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.690511] NET: Registered PF_INET protocol family [ 0.692488] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.694828] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.696371] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.697704] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.699118] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.701287] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720741] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721939] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723143] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.724427] RPC: Registered named UNIX socket transport module. [ 0.725411] RPC: Registered udp transport module. [ 0.726444] RPC: Registered tcp transport module. [ 0.727439] RPC: Registered tcp-with-tls transport module. [ 0.728502] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.729852] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.731172] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.732311] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.733451] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.735528] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.736673] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.738022] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.739331] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.740546] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.741779] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.743131] PCI: CLS 0 bytes, default 64 [ 0.743853] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.744932] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.746266] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.756557] Initialise system trusted keyrings [ 0.757437] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.758697] NFS: Registering the id_resolver key type [ 0.759588] Key type id_resolver registered [ 0.760931] Key type id_legacy registered [ 0.762896] Key type cifs.idmap registered [ 0.774954] xor: automatically using best checksumming function avx [ 0.776167] Key type asymmetric registered [ 0.776860] Asymmetric key parser 'x509' registered [ 0.777768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.778989] io scheduler mq-deadline registered [ 0.779734] io scheduler kyber registered [ 0.780382] io scheduler bfq registered [ 0.781327] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.786248] ACPI: button: Power Button [PWRF] [ 0.787841] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.792132] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.795498] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.800316] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.801936] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.803018] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.804307] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.806567] Linux agpgart interface v0.103 [ 0.807274] ACPI: bus type drm_connector registered [ 0.808089] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.808938] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.812059] Console: switching to colour dummy device 80x25 [ 0.813054] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.813055] [drm] features: -context_init [ 0.815121] [drm] number of scanouts: 1 [ 0.815722] [drm] number of cap sets: 0 [ 0.816484] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.838918] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.845059] Console: switching to colour frame buffer device 160x50 [ 0.875314] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.885458] brd: module loaded [ 0.886693] loop: module loaded [ 0.887317] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.889505] virtio_blk virtio3: [vda] 788280 512-byte logical blocks (404 MB/385 MiB) [ 0.892521] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.893919] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.894953] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.896703] scsi host0: ahci [ 0.897414] scsi host1: ahci [ 0.898102] scsi host2: ahci [ 0.898791] scsi host3: ahci [ 0.899469] scsi host4: ahci [ 0.900148] scsi host5: ahci [ 0.900672] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.903697] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.905070] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.906472] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.907898] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.909278] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.913692] e100: Intel(R) PRO/100 Network Driver [ 0.915593] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.917086] e1000: Intel(R) PRO/1000 Network Driver [ 0.917908] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.918866] e1000e: Intel(R) PRO/1000 Network Driver [ 0.919688] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.920660] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.921549] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.923077] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.924842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.927576] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.930673] hub 1-0:1.0: USB hub found [ 0.931351] hub 1-0:1.0: 2 ports detected [ 0.932266] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.933970] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.936325] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.943252] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.944250] hub 2-0:1.0: USB hub found [ 0.944817] hub 2-0:1.0: 6 ports detected [ 0.966382] hub 1-0:1.0: USB hub found [ 0.967930] hub 1-0:1.0: 2 ports detected [ 0.969599] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.971683] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.974128] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.975912] hub 3-0:1.0: USB hub found [ 0.977318] hub 3-0:1.0: 2 ports detected [ 0.979650] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.981308] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.983725] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.984748] hub 4-0:1.0: USB hub found [ 0.985327] hub 4-0:1.0: 2 ports detected [ 0.986060] usbcore: registered new interface driver usb-storage [ 0.986998] usbcore: registered new interface driver usbserial_generic [ 0.988001] usbserial: USB Serial support registered for generic [ 0.988980] usbcore: registered new interface driver ftdi_sio [ 0.989865] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.991075] usbcore: registered new interface driver pl2303 [ 0.992052] usbserial: USB Serial support registered for pl2303 [ 0.992997] i8042: PNP: No PS/2 controller found. [ 0.993800] mousedev: PS/2 mouse device common for all mice [ 0.994729] rtc_cmos 00:03: RTC can wake from S4 [ 0.996046] rtc_cmos 00:03: registered as rtc0 [ 0.996883] rtc_cmos 00:03: setting system clock to 2025-07-02T07:40:37 UTC (1751442037) [ 0.998146] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.999444] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.999758] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.001176] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.003558] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.005672] sdhci: Secure Digital Host Controller Interface driver [ 1.009481] sdhci: Copyright(c) Pierre Ossman [ 1.010140] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.011065] usbcore: registered new interface driver usbhid [ 1.011945] usbhid: USB HID core driver [ 1.012540] u32 classifier [ 1.012938] input device check on [ 1.013514] Actions configured [ 1.014117] NET: Registered PF_INET6 protocol family [ 1.015373] Segment Routing with IPv6 [ 1.016841] In-situ OAM (IOAM) with IPv6 [ 1.018447] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.020696] NET: Registered PF_PACKET protocol family [ 1.021491] Bridge firewalling registered [ 1.022095] l2tp_core: L2TP core driver, V2.0 [ 1.022763] Key type dns_resolver registered [ 1.023516] NET: Registered PF_VSOCK protocol family [ 1.024615] IPI shorthand broadcast: enabled [ 1.026034] sched_clock: Marking stable (885038798, 140218613)->(1157245771, -131988360) [ 1.027486] registered taskstats version 1 [ 1.028114] Loading compiled-in X.509 certificates [ 1.029528] Key type .fscrypt registered [ 1.030121] Key type fscrypt-provisioning registered [ 1.031527] Btrfs loaded, zoned=no, fsverity=no [ 1.033116] Key type encrypted registered [ 1.033972] printk: legacy console [netcon0] enabled [ 1.034746] netconsole: network logging started [ 1.182306] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.220333] ata4: SATA link down (SStatus 0 SControl 300) [ 1.222769] ata6: SATA link down (SStatus 0 SControl 300) [ 1.224855] ata2: SATA link down (SStatus 0 SControl 300) [ 1.226017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.228693] ata5: SATA link down (SStatus 0 SControl 300) [ 1.230661] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.231599] ata3.00: applying bridge limits [ 1.232487] ata1: SATA link down (SStatus 0 SControl 300) [ 1.234266] ata3.00: configured for UDMA/100 [ 1.235323] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.263629] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.265554] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.287251] IP-Config: Complete: [ 1.288625] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 1.292648] host=192.168.7.8, domain=, nis-domain=(none) [ 1.294681] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.294682] nameserver0=8.8.8.8 [ 1.296383] clk: Disabling unused clocks [ 1.297457] md: Waiting for all devices to be available before autodetect [ 1.298242] md: If you don't use raid, use raid=noautodetect [ 1.298934] md: Autodetecting RAID arrays. [ 1.299412] md: autorun ... [ 1.299745] md: ... autorun DONE. [ 1.305397] EXT4-fs (vda): mounted filesystem 4b12d8c9-2ac3-453e-a0e7-2ed932e6304f r/w with ordered data mode. Quota mode: disabled. [ 1.306875] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.307683] devtmpfs: mounted [ 1.308660] Freeing unused kernel image (initmem) memory: 3528K [ 1.309364] Write protecting the kernel read-only data: 26624k [ 1.310253] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.311899] Run /sbin/init as init process INIT: [ 1.316344] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 version 3.14 booting [ 1.320124] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.351461] udevd[138]: starting version 3.2.14 [ 1.356116] udevd[139]: starting eudev-3.2.14 [ 1.434281] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.565845] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.618979] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.682556] EXT4-fs (vda): re-mounted 4b12d8c9-2ac3-453e-a0e7-2ed932e6304f. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-27ea5e6564a574dfe93e5bf55cdd22357566f22c qemux86-64 /dev/ttyS0 qemux86-64 login: